Stylus for hp touchsmart

My system: HP tx2-1375dx.
Can I buy the digitizer pen for the tm2 and download the driver for it?

Hello,
You will need to look for a stylus that works with a capacitive touch screen.  For more information, you can check here: http://www.styluscentral.com/Capacitive-Touch-Screen-Technology.html
-Chris
I work for HP.
Support Forums are now on your mobile phone: http://m.hp.com/supportforum

Similar Messages

  • Where can I download HP Recovery Manager for my TouchSmart 610--1150x​t running WIndows 7 x64?

    Many users would prefer a clean install of Windows with the option to install only those applications that they personally find useful.  Currently, if performing a clean install of Windows -- even if creating recovery disks and maintaining the HP recovery partition -- it is not possible to access the Recovery Manager with the option to re-install only the drivers and any useful preinstalled software.  The only options under these circumstances is to perform a system restore back to the factory state thus removing an separate clean installation of the operating system or reinstalling the limited number of drivers and applications available for the TouchSmart from HP Support.
    If it were possible to reinstall the HP Recovery Manager software, it should also be possible to selectively re-install needed drivers and applications from the recovery partition using the "Software Program Reinstallation" and "Hardware Driver Reinstallation" options.  These options are not available from the boot menu or reinstall disks.
    I have found downloads for the Recovery Manager software specific for Windows Vista and for certain specific HP laptops running WIndows 7, but I have been unable to locate a similar download for the TouchSmart 610 AIO.  Has anyone located a download of the HP Recovery Manager software applicable for the TouchSmart 610?

    This procedure uses the original factory installed HP OEM Windows product key and HP OEM certificate and requires the HP BIOS to have SLP/SLIC v2.1. This procedure will install a completely clean Windows 7 installation and may require the installation of HP drivers. Some HP drivers and/or HP software needed by your computer may not install because the OS is no longer branded as "HP". Please create your personal HP Recovery Disc set before continuing with these instructions. Back-up all of your personal data and files before proceeding with this process.
    1) Download and unzip ABR Beta for Windows 7. Here is the main page to ABR for Windows Vista. Please follow the "How to use it" section for information and instructions on how to use it. These steps apply to Windows 7 as well. Perform the "activation backup" on your original hard drive with the factory HP OEM Windows installation, saving the backup files in several locations (USB stick, SD card, external drive, etc.).
    2) Download your version (the version that was preinstalled on your HP computer) of Windows 7 from Official Windows 7 SP1 ISO from Digital River. Using the built-in Windows 7 CD/DVD burning software, burn the downloaded Windows 7 ISO image to a DVD.
    3) Install Windows 7 from your new "Windows 7 disc" to your SSD, following all prompts as needed. Don't enter a Windows product key and don't allow Windows to try to auto-activate. After the Windows installation is complete, run ABR "activation restore" to "install" the previously backed up product key and certificate. Verify that Windows is activated, if not activated... repeat "activation restore" until Windows 7 is activated.
    ++++++++++++++++++++++++++++++++++++++++++++++++++​++++++++++++++++++++++++++++++++++
    I, personally, have used the above procedure with great success on many HP desktops and laptops. I can't comment on how well it works with HP TouchSmart computers as I haven't had one to experiment on until recently.
    ++++++++++++++++++++++++++++++++++++++++++++++++++​++++++++++++++++++++++++++++++++++
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • What is the best stylus for macbook pro?

    What is the best stylus for macbook pro?

    I dont understand? Why would a mac use a stylus when they aren't touchscreen?

  • I need to get a replacement stylus for my samsung galaxy note 4 how much do these normally cost and where can i buy it?

    I need help I need to get a replacement stylus for my galaxy note 4 where can i buy it and how much do they cost?

        Kristinkeani,
    The pen is the best part of the phone! Great news you can get one online at verizonwireless.com under accessories. They are $29.99 before taxes.
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • Stylus For My MacBook Pro

    Hey all, for now I can't afford a drawing tablet so I was wondering if anyone could suggest the best stylus for my MacBook Pro so that I could perform some simple drawings?
    Thanks,
    Crayton

    You know, I really didn't look around as hard as I thought I did. Actually I just saw a few posts here and there talking about how much these things are and it scared me a way. Therefore, you are right, these are within my budget. What I am going to be using them for is for some fairly simple graphics for animating some web commercials for a company that I will be working with. They want simple animation, but trying to work it with my mouse or finger is just stupid (for me). Therefore I thought I go for a stylus that I could draw with on my laptop. But if there is a pad and stylus that is within those prices then I would go for that. Thank you by the way.
    Based on the limited details that I have given you, do you think they will do the trick? (I'm trying to think of an example to give you of what they are thinking of).......have you seen those UPS commercials that the dude is drawing on the white wall? Those are very simple graphics, and that is about what they are looking for. My main goal is that I am able to create clean lines. Do you know what I mean?
    Either way thank you.
    Also, thanks to you other guys and your posts, on my behalf. To answer one of the earlier posts, I was only wanting the stylus to be used on the built-in tablet on my MacBook. Is that what you were asking?
    Thanks again guys,
    Crayton

  • Looking for best application and stylus for iPad

    I am looking to download an application for an ipad to use with a stylus, but don't know which application or stylus is best.  Please share your opinion on the best application and stylus for taking handwritten notes.

    Procreate is the only good reason to own an iPad, it has support for the top three stylus. However iOS7 has broken the Bluetooth Bridge that Pogo Connect, Wacom and Jot need to give pressure sensitive support. Procreate hardly works now.. except..you want to finger paint.
    But when it is fixed I would suggest buying the Pogo Connect and a set of nibs and if I had only one App to use it with I'd use Procreate. It's vastly superior to many desktop Apps too.
    However, Apple relying on third party Stylus support only makes my MS Surface Pro look like where I'll be spending my cash on the next upgrade cycle. Why Apple has not come out with an iPad Pro is a stunning insult.

  • Using stylus for drawing on iPad air

    What's the best stylus for artists to draw on the IPad Air? I tried the Wacom Intuos Creative Stylus and it wouldn't stay connected to Bluetooth and you had to press so hard to have it register.

    Well I'm new to iPad and wanted to get the latest etc, but am also finding that current advanced stylus models do not support well this iPad in term of their capabilties regarding pressure sensitivity and palm rejection.
    It seems the 4th gen iPad is the last model iPad supporting the current crop of stylus, but having an 'air' I wasn;t about to go backwards. My hope was that current software titles would catch up such as: Adobe Idea, Paper by 53, BamBoo Paper, iDraw, InkPad, Sprite Something; they all lag in support.
    I first got a Bamboo Duo 2 (pen and "dumb" stylys) which is fine, no presssure sensitivity, but nib a bit spongy so I ordered a set of thier 'firm' nibs I'm waiting on.  I had also gotten a Pencil by 53 (Fifty Three) which is awesome but no sensitivity though its unique support within Paper make it my first choice there (i.e., blending support) but its nib too I find a bit spongy, but they would not comment on future direction of nibs as ther're only the one.  It did come with two (one being DOA) but they've since sending me out two others gratefully as I've worn out my working nib.  So I kept looking...
    The Adonit Jot Pro is non-starter for me, as my iPad is brand new (still to get AppleCare now that it covers water damage), given the rumors of screen damage which I wish they'd address publically someplace as I'm risk averse (64g cell iPad Air ain't cheap). This left me with the Pogo Connect and Intuos Creative Stylus, both more expensive that my Pencil, but established so I went looked for used.
    So I found a Pogo Connect in near mint condition and learned they also have an app to test, find your pogo etc settings. Viola!the pen within their app works fine as expected, told them so in feedback and cheered me a bit that the issue which seems to be regarding the iPad Air (higher resolution bla bla bla and finger pointing amond vendors) is a software one with the current crop of apps out there. Old story of new h/w require s/w updates.
    Definitely try before you buy and maybe used would work for you as well.  I'm liking a bit of each of stylus I have I like and would like to see some commonality among the more advanced ones like firmer nibs, palm negation support, pressure sensitivity and explicit undo/erase (the Pencil wins here).
    I'm not a professional nor unlimited funds to triage others wares but I hope this experience helps.

  • Does anyone know where i can get cheep parts (ac adapter 150-watt for hp touchsmart pc)?

    Does anyone know where i can get cheep parts (ac adapter 150-watt for hp touchsmart pc)?

    Hello mdhart: Ebay.com has several posted log on Ebay select computers and type in HP Touchsmat. Computers will display go down the page you will see AC Adapters. Price range is from $27.99 to $43.99. Most of them are buy it now $28.99 Today they have 11 of them posted. You can contact Hp store on live chat and get their price. Hp did not list HP Touchsmarts AC adapters. Just laptops AC adapters are listed. So you have to contact the HP store to get information about Hp Touchsmart AC adapters.

  • Recommend a stylus for the iPad air, and good apps?

    Hi anyone use a stylus  for note taking etc on their ipad, any good ones and also any good apps for this for business thanks.

    To paraphrase from the late Steve Jobs, why don't you use the greatest stylus in the history of mankind. Your fingers.

  • Is there a fine point stylus for iPad?

    I use the ipad to take a lot of notes that convert to text and the standard blunt end stylus just isn't working any more.

    took your title and typed it into google
    http://www.macgasm.net/2011/08/29/jot-precision-stylus-touch-screens/
    more hits
    https://www.google.com/search?source=ig&hl=en&rlz=1G1TSEH_ENDK367&q=fine+point+s tylus+for+iPad&oq=fine+point+stylus+for+iPad&aq=f&aqi=g1g-m1g-v1&aql=&gs_nf=1&gs _l=igoogle.3..0j0i5j0i15.676722.676722.0.677015.1.1.0.0.0.0.134.134.0j1.1.0.

  • Stylus for Lenovo Flex 2 14"

    Hello.
    I've just bought a Lenovo Flex 2 14" with Full HD screen (1920x1080).
    I'm interested in using a digital pen (stylus) for writing and drawing.
    Anybody has found a good stylus for this laptop? I have one with a thick rubber point, and the precision is very poor, the lines when I'm drawing always are discontinuous instead of straight.
    Thank you in advance, best regards
    Mike

    Hi again,
    As an update - I had a look to see if a 42mm ssd would fit. Unfortunately it does not. Some measuring and digging around indicates that is a 30mm (2230) slot - A/E keys. Nobody yet sell an ssd of this size.
    The only hope that I can see of is an extender such as the one here: http://www.amazon.com/P12S-P12F-M-2-NGFF-Extender-Board/dp/B00IPOT3O2. It looks like there is enough free space inside to take it, though uncertain.
    This would however require a PCI-e based ssd (the 2242 ones are usually sata ones), and based on people's experiences of upgrading the wifi, we'll be at the mercy of the hardware whitelist (as it's pci-e based). It looks like most pcie m.2 ssd's are 2280 size or bigger too, which might be pushing the room.
    Given the cost of the adaptor and right size/type ssd, the total cost is close to a decent 500GB 2.5" SSD, so I don't think I'll be attempting it. Plus I'd still lose the built in wifi
    Have a happy new year!

  • Type of stylus for iPad2 -- can I use one from a Treo

    I have some old styluses from an old smart phone (Treo?) and wanted to know the specs for one to use for an iPad2.  i.e., can I use that old soft-tipped stylus for my iPad2?  How do I know which ones are "safe"?
    Thank you,
    Ron

    The Treo used a different type of touch screen. The stylus won't work on the iPad. There are lots of different brands out there. Just search Amazon for iPad Stylus. It's important to note that any stylus that works with the iPad's capacitive touch screen will have a fairly wide, soft tip.

  • Does anybody know if there is a stylus for 3gs

    Hi, does anybody know if there is a stylus for 3G please?
    cupcake

    There are many available in the UK.  Try a Google search for where you are.
    If you have access to Amazon, they stock them.

  • I need the drivers for a touchsmart iq 770,i need the drivers in xp not vista

    I need the drivers for a touchsmart iq770,i have the disc with drivers on but will not load them because the O S is windows xp,it will not load vista on there,i have down loaded the media file hp suggest but it does not work any ideas

    Hiya got on the web with a wirless but cant down load the windows media center and cant play no music because havent got drivers for sound card could well be going in the bin,its bloody bugging me why i cant reload windows vista on it just goes 85% then fails does the same with windows 7,will it be hard drive or a meomey promblem,
    Thanks so much for you  help
    Barry

  • Best stylus for iPad

    What is the best stylus for writing on the iPad? Which app is most suited to use of stylus to write notes?
    Which is the best stylus for paint application: to draw and to use the brush?

    General consnsus is that no stylus is perfect, and may vary according to your personal taste.
    http://www.theverge.com/2012/4/10/2925937/best-stylus-ipad-review
    This is the best video wrap-up I've seen.

Maybe you are looking for

  • Sale order before the regeneration of ABAP report: RSM13000

    Hi there, I am just wondering about something. After we installed support packages, users could not get any sales order without to get any error message and I we could only see  an error message via SM21 which says: Run-time error "LOAD_TYPEPOOL_VERS

  • How to make sure newly created row is editable by default programatically

    Hi All, I got a problem with creating new row in single row selection table with on click property enabled for editing mode. Function requirement is like: I have Mater-Detail. While creating detail lines, line has to be created with default line numb

  • How can I buy a iPhone 5c unlocked?

    Hi, I want to buy a iPhone 5c but im from Mexico. I want to use it here but buy it in USA. Can I buy it unlocked?

  • I've forgotten my iphone password

    my iphone 4s recently required a password change and I've forgotten it, how do I re-set?

  • Calling TS_TerminateAll from a thread

    I started a UI in a thread in TS. There is a button on the UI. When I click on the button, the TS_TerminateAll will be called to terminate all execution. and then, it will call ProcessCleanup to close the instruments. However, I'm having some problem