SUBMIT a report without showing the selection-screen

hey guys,
i want to submit a report(rep2) from my report.(rep1)
rep2 has selection-screen.(it also has ldb associated).
i am apssing all the data for selection-screen(of rep2) using an itab.
but now i dont want selection-screen of rep2 to be displayed when rep1 is executed.
how to go about?

Dear Kumar,
you can use the below specified variants
SUBMIT <REPORT NAME>
1. ... USING SELECTION-SET vari
2. ... WITH p op f SIGN s
3. ... WITH p BETWEEN f1 AND f2 SIGN s
4. ... WITH p NOT BETWEEN f1 AND f2 SIGN s
5. ... WITH p IN sel
6. ... WITH SELECTION-TABLE seltab
7. ... WITH FREE SELECTIONS texpr
Eg.,
CLEAR paramtrs.
    REFRESH paramtrs.
    PERFORM append_selection_table USING :
                  'SO_NUM' 'P' 'EQ' 123456
                  'ITEM'   'P' 'EQ' abcdef,
                  'POS'    'P' 'EQ' 10.
    SUBMIT <abc> WITH SELECTION-TABLE paramtrs AND RETURN.
FORM append_selection_table USING fname ftype fopre fvalue.
MOVE : fname TO paramtrs-selname,
         ftype TO paramtrs-kind,
         fopre TO paramtrs-option,
         fvalue TO paramtrs-low.
APPEND paramtrs.
ENDFORM.
where SO_NUM, ITEM AND POS are the report abc's input selection screen.

Similar Messages

How i can show the selection screen input field in the top of page in alv

hi ,
          how i can show the selection screen input field in the top of page in alv grid output.
tell me the process

Hi,
excample from my program:
FORM topof_page.
DATA: l_it_header   TYPE TABLE OF slis_listheader WITH HEADER LINE,
        l_info        LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
    if not &1 is initial.
      clear l_it_header.
      l_it_header-typ   = 'S'.
      l_key = '&1'.
      translate l_key to upper case.
      read table l_it_textpool with key key = l_key.
      if sy-subrc = 0.
        shift l_it_textpool-entry left deleting leading space.
        l_it_header-key = l_it_textpool-entry .
      endif.
      loop at &1.
        case &1-option.
          when 'EQ'
            or 'BT'
            or 'CP'.
            write &1-low to l_it_header-info.
          when others.
            write &1-low to l_it_header-info.
            concatenate &1-option
                        l_it_header-info
                   into l_it_header-info
                   separated by space.
        endcase.
        if not &1-high is initial.
          write &1-high to l_info left-justified.
          concatenate l_it_header-info
                      l_info
                 into l_it_header-info
                 separated by space.
        endif.
        if &1-sign = 'E'.
          concatenate ']'
                      l_it_header-info
                 into l_it_header-info.
        endif.
        append l_it_header.
        clear: l_it_header-key,
               l_it_header-info.
      endloop.
    endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
             s_trmext,
             s_trmint,
             s_fkdat,
             s_delno,
             s_vbeln,
             s_deact,
             s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole

Linking to an OBIEE report without showing the user and password

Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
Nuria

Hi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp);

Submit a report program with same selection screen with some values exclude

Dear All,
I have to submit a stndard report program from a copied zprogram with same slection screen values ,
and in some slect-options some values will be excluded depending upon the zprogram.
How to make it.
I mean when i submit , same selction screen values should go along with , depending upon some condions i have to exclude some values .
for ex: selection screen from a to b
posting date should go same
but may be along with it i have to pass movem,ent type <> 202 to the submit screen ,.
how to do this?

Hi Rajendra
>What if i have to pass the movement type also 200 to 250 , with 202 and 203 exluded .
Use BT ( between ) operator for 200 to 250 :
lr_move_type-sign = 'I'.
lr_move_type-option = 'BT'.
lr_move_type-low = '200'.
lr_move_type-high = '250'.
COLLECT lr_move_type.
And use NE ( not equal ) operator to exclude 202 and 203 :
lr_move_type-sign = 'I'.
lr_move_type-option = 'NE'.
lr_move_type-low = '202'.
COLLECT lr_move_type.
lr_move_type-low = '203'.
COLLECT lr_move_type.
It works just this way.
> Secondly,
>
> If i have the selction sreen same in both the screen , is it possible to pass the same values as it is with out writing one by one selct-option and parameter?
No I don't think there is way to do it without writing one by one
but you may not specify for empty select-options.
Edited by: Bulent Balci on Aug 21, 2010 11:46 AM

How to submit a report withour showing the ALV?

Hi all,
I need to make a submit (or any other suggestion is acepted) to the report rkeb0601 (trx KE24), get the result from that execution in an internal table or something, to create a diferent ALV output. I don't want to see the ALV that rkeb0601 is showing when I make the submit.
Any idea how I can make this?
Thanks a lot!
Regards.

Unfortunatelly I'm working with 4.6c version, so enhacement is not an option. I already search for an user-exit but i didn´t find one.
The other thing that cames to my mind is to copy rkeb0601 but doing this I also have to copy the report rk2c11000 because it's being called dynamically from rkeb0601. It seems a lot of work.
Yes, it seems to be a lot of work but copy is the best option.

How to skip the Selection screen completely for certain users?

Hi All,
   I want to skip the entire selection screen based on sy-uname. I check if the sy-uname has sufficient authorization and based on that..I want to skip the entire selection screen. How do I do that?

Hi Rachna,
use
<b>SUBMIT program
            with sy-uname = 'TEST'
             and return.</b>
If u specify and return the control will come back and execute the next line in the report.
It is giving the output directly without showing the selection screen.
If u r pressing back also it is not showing the selction screen.
This will work
Regards
Naresh

How to gray out certain fields on the selection screen based on the radio b

HI All,
I have an ALV report. On the selection screen I have 2 radio buttons ..for eg..A and B.
When radio button A(its on by default) is on..certain fields not relevant to this should be grayed out. Similarly when radio button B is on, certain fields should be grayed out.
I did the AT SELECTION SCREEN OUTPUT and also did the
LOOP AT SCREEN....ENDLOOP logic. The logic works but when I click the radio button B...the screen fields automatically does not gray out. I have to press ENTER and then its grays out.
I know a USER_COMMAND needs to be attached.
Can anyone give me a step by step details of how to do this. I truly appreciate it. if a screen painter thing is required..please give me the tcode and step by step detail to do this.
Thanks

Try this one too:
REPORT ztest.
TABLES: mara,
        bkpf.
CONSTANTS:
              c_pos(3) TYPE c VALUE 'POS',
              c_acc(3) TYPE c VALUE 'ACC',
              c_all(3) TYPE c VALUE 'ALL',
              c_x TYPE c VALUE 'X'.
The Selection Screen Definition
SELECTION-SCREEN BEGIN OF BLOCK b_0 WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_mara FOR mara-matnr.
SELECTION-SCREEN END OF BLOCK b_0.
SELECTION-SCREEN BEGIN OF BLOCK b_1 WITH FRAME TITLE text-037.
PARAMETER: rb_all RADIOBUTTON GROUP rb1 USER-COMMAND rad default 'X',
           rb_acc RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF BLOCK b_1.
SELECTION-SCREEN BEGIN OF BLOCK b_2 WITH FRAME TITLE text-011. "Acct
SELECT-OPTIONS:   s_blrtc1 FOR bkpf-blart MODIF ID acc,
                  s_blrti1 FOR bkpf-blart MODIF ID acc.
SELECTION-SCREEN END OF BLOCK b_2.
SELECTION-SCREEN BEGIN OF BLOCK b_3 WITH FRAME TITLE text-011. "Acct
SELECT-OPTIONS:   s_blrtc2 FOR bkpf-blart MODIF ID all,
                  s_blrti2 FOR bkpf-blart MODIF ID all,
                  s_blrtv2 FOR bkpf-blart MODIF ID all.
SELECTION-SCREEN END OF BLOCK b_3.
AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
PERFORM f0200_screenfield_hide_logic.
initialization.
PERFORM f0200_screenfield_hide_logic.
      FORM f0200_screenfield_hide_logic                             *
FORM f0200_screenfield_hide_logic.
LOOP AT SCREEN.
    IF rb_acc = c_x.
      IF screen-group1 = c_all.
        screen-active = 0.
      ELSE.
        screen-active = 1.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
    IF rb_all = c_x.
      IF screen-group1 = c_acc.
        screen-active = 0.
      ELSE.
        screen-active = 1.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
ENDFORM.                    " F0200_SCREENFIELD_HIDE_LOGIC

Show the drop down list of variant on the selection screen in ALV reports

Hi,
i have a alv report when i execute this display will come and then i click display layout it save as a variant on the selection screen and when i go back to selection screen and press f4 on the display variant its show the drop down list of varient.
can u send me some code for this functionality...its very urgent.
thanks!
Vipin

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

Submir Report "RSNAST00" and passing parametrs to the selection screen

Hello ABAP,
I have to code a Report/TA which gathers some info and then calls RSNAST00.
The info gathering part is done.
The info gathered shall be transferred to the report RSNAST00 or to it´s selection screen, tho the selection screen should not be visible. And then RSNAST00 shall do it´s normal job.
Any hints how i can pass those parameters and make that selection screen not appear?

Hi florian,
1. We have to use the comand SUBMIT with the program name and some extensions.
(please see F1 help on it)
2. This will call the required program.
3. We can also pass the required values using WITH Var1 = Val1
4. we can use the extension AND RETURN so that the selection screen of RSNAST00 does not appear on screen.
regards,
amit m.

Report OutPut directly to the printer by selecting in the selection screen

Hi Guys,
Can any one help,
How to give Report output (ALV report ) directly to the printer by selecting the printer name in the selection screen .
Sap Version is ECC 6.0.
Thanks In advance
praveen k

hi,
u can do it using submit statement.
SUBMIT TO SAP-SPOOL
Basic form
SUBMIT rep ... TO SAP-SPOOL.
Extras:
1.... DESTINATION dest         ... COPIES cop
        ... LIST NAME name
        ... LIST DATASET dsn
        ... COVER TEXT text
        ... LIST AUTHORITY auth
        ... IMMEDIATELY flag
        ... KEEP IN SPOOL flag
        ... NEW LIST IDENTIFICATION flag
        ... DATASET EXPIRATION days
        ... LINE-COUNT lin
        ... LINE-SIZE col
        ... LAYOUT layout
        ... SAP COVER PAGE mode
        ... COVER PAGE flag
        ... RECEIVER rec
        ... DEPARTMENT dep
        ... ARCHIVE MODE armode
        ... ARCHIVE PARAMETERS arparams
        ... WITHOUT SPOOL DYNPRO
2. ... SPOOL PARAMETERS params
         ... ARCHIVE PARAMETERS arparams
         ... WITHOUT SPOOL DYNPRO
3. ... Further parameters (for passing variants)
        are described in the documentation for SUBMIT
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Missing print parameters with SUBMIT.
Effect
Calls the report rep with list output to the SAP spool database.
Additions
... DESTINATION dest(output device)
... COPIES cop(number of copies)
... LIST NAME name(name of list)
... LIST DATASET dsn(name of spool dataset)
... COVER TEXT text(title of spool request)
... LIST AUTHORITY auth(authorization for display)
... IMMEDIATELY flag(print immediately ?)
... KEEP IN SPOOL flag(keep list after print ?)
... NEW LIST IDENTIFICATION flag(new spool request ?)
... DATASET EXPIRATION days(number of days list
retained)
... LINE-COUNT lin ( lin lines per page)
... LINE-SIZE col(col columns per line)
... LAYOUT layout(print format)
... SAP COVER PAGE mode(SAP cover sheet ?)
... COVER PAGE flag(selection cover sheet ?)
... RECEIVER rec(SAP user name of
recipient)
... DEPARTMENT dep(name of department)
... ARCHIVE MODE armode(archiving mode)
... ARCHIVE PARAMETERS arparams(structure with archiving
parameters)
... WITHOUT SPOOL DYNPRO(skip print control screen)
With the parameters IMMEDIATELY, KEEP IN SPOOL, NEW LIST IDENTIFICATION and COVER TEXT, flag must be a literal or character field with the length 1. If flag is blank, the parameter is switched off, but any other character switches the parameter on. You can also omit any of the sub-options of PRINT ON. mode with SAP COVER PAGE can accept the values ' ', 'X' and 'D'. These values have the following meaning:
' ' : Do not output cover sheet
'X' : Output cover sheet
'D' : Cover sheet output according to printer setting
armode with ARCHIVE MODE can accept the values '1', '2' and '3'. These values have the following meaning:
'1' : Print only
'2' : Archive only
'3' : Print and archive
arparams with ARCHIVE PARAMETERS must have the same structure as ARC_PARAMS. This parameter should only be processed with the function module GET_PRINT_PARAMETERS.
Effect
Output is to the SAP spool database with the specified parameters. If you omit one of the parameters, the system uses a default value. Before output to the spool, you normally see a screen where you can enter and/or modify the spool parameters. However, you can suppress this screen with the following statement:
... TO SAP-SPOOL WITHOUT SPOOL DYNPRO
You could use this option if all the spool parameters have already been set!
reward points if hlpful.
Note
When specifying the LINE-SIZE, you should not give any value > 132 because most printers cannot print wider lists.
Addition 2
... SPOOL PARAMETERS params(structure with print
parameters)
... ARCHIVE PARAMETERS arparams(Structure with archive
parameters)
... WITHOUT SPOOL DYNPRO(skip print parameters
screen)
Effect
Output is to the SAP spool database with the specified parameters. The print parameters are passed by the field string params which must have the structure of PRI_PARAMS. The field string can be filled and modified with the function module GET_PRINT_PARAMETERS. The specification arparams with ARCHIVE PARAMETERS must have the structure of ARC_PARAMS. This parameter should only be processed with the function module GET_PRINT_PARAMETERS. Before output to the spool, you normally see a screen where you can enter and/or modify the spool parameters. However, you can suppress this screen with the following statement:
... WITHOUT SPOOL DYNPRO
Example
Without archiving
DATA: PARAMS LIKE PRI_PARAMS,
      DAYS(1) TYPE N VALUE 2,
      COUNT(3) TYPE N VALUE 1,
      VALID    TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION           = 'LT50'
            COPIES                = COUNT
            LIST_NAME             = 'TEST'
            LIST_TEXT             = 'SUBMIT ... TO SAP-SPOOL'
            IMMEDIATELY           = 'X'
            RELEASE               = 'X'
            NEW_LIST_ID           = 'X'
            EXPIRATION            = DAYS
            LINE_SIZE             = 79
            LINE_COUNT            = 23
            LAYOUT                = 'X_PAPER'
            SAP_COVER_PAGE        = 'X'
            COVER_PAGE            = 'X'
            RECEIVER              = 'SAP*'
            DEPARTMENT            = 'System'
            NO_DIALOG             = ' '
IMPORTING OUT_PARAMETERS        = PARAMS
            VALID                 = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.
Example
With archiving
DATA: PARAMS   LIKE PRI_PARAMS,
      ARPARAMS LIKE ARC_PARAMS,
      DAYS(1) TYPE N VALUE 2,
      COUNT(3) TYPE N VALUE 1,
      VALID    TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION            = 'LT50'
            COPIES                 = COUNT
            LIST_NAME              = 'TEST'
            LIST_TEXT              = 'SUBMIT ... TO SAP-SPOOL'
            IMMEDIATELY            = 'X'
            RELEASE                = 'X'
            NEW_LIST_ID            = 'X'
            EXPIRATION             = DAYS
            LINE_SIZE              = 79
            LINE_COUNT             = 23
            LAYOUT                 = 'X_PAPER'
            SAP_COVER_PAGE         = 'X'
            COVER_PAGE             = 'X'
            RECEIVER               = 'SAP*'
            DEPARTMENT             = 'System'
            SAP_OBJECT             = 'RS'
            AR_OBJECT              = 'TEST'
            ARCHIVE_ID             = 'XX'
            ARCHIVE_INFO           = 'III'
            ARCHIVE_TEXT           = 'Description'
            NO_DIALOG              = ' '
IMPORTING OUT_PARAMETERS         = PARAMS
            OUT_ARCHIVE_PARAMETERS = ARPARAMS
            VALID                  = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    ARCHIVE PARAMETERS ARPARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.

Is there a way to use 'GET PERNR' without the selection screens?

I would like to use the GET PERNR event in a batch program without using the default selection screens. I would like to be able to use my own selection screen and parameters, but only get them along with the default selection options for payroll period. I've tried removing the screen number from the attributes screen, but still get these options. Is this possible?

hi Kiran,
report Category is a Pushbutton on the Attributes popup, it only appears if you use PNP logical DB.
this is from SAPHelp: "Report Category
Category used for HR reports that use the PNP logical database. It controls the type and number of fields that appear on the selection screen of an evaluation report."
hope this helps
ec

To display the selection screen variant name in WAD report output.

Hello experts,
I have a requirement which is to display the selection screen variant description in the output of the WAD report.
I managed halfway, by using the object "Information field", which displays all the values which are selected by the variant.
Example:I have created a cost center report created using WAD, since I need some graphical displays..
In the selection screen, I have the characteristic "cost center" as input field. I have created a variant " GM - IT" which will include few cost centers managed by GM. In the output, I want the dispaly to be "Cost center - GM IT". Currently it displays "Cost Center - a,b,c,d" as the values a,b,c,d are the values from the variant name "GM-IT"
Please let me know if this required any java script. I am not familiar with java / html codes and any help would be much appreciated (and rewarded)
Thanks in advance
KS

Hi,
Try this.
If you want to include your variables in your WAD means you have to choose "Force Variable Screen" option to be in enabled condition.
TO enable this,in WAD select your Template(New Template1) click the WEBITEM , it'll shows all generic properties , here you can enable this "Force variable screen"
Save and execute your WAD now you can get your variable screen.
Thanks,
JituK

Calling the selection screen of report with data for the selection field

I have the selection screen with 2 fileds.
sales order and payment terms.
My requirement is to update the payment terms into the ztable for the given order.
Sometimes the payment terms will be there ie already maintained ,in that case i need to show to the user the existing payment term ,so that he can modify and save that one.If the payment term is not existing then simply i can go inside the program and update the payment term.
What I thought of doing is , writing a report program and then after the user inputs the selection screen ie order number , I Will check in the ztable and if the payment terms is found then i will use the key word leave list processing. But i dont know how to populate the payement term in the selection screen oncegaing from the program

Hi shiva,
when the user enters sales order number on screen, in parameter 1,
you want to show payment term, on selection screen itself, in parameter 2.
We can use the event
AT SELECTION-SCREEN.
Eg. PO Number <----
> User
Below is sample code for same.
If you enter PO Number, the system will show the corresponding user in parameter2.
Just copy paste.
REPORT YAM_TEMPA09.
PARAMETERS : EBELN LIKE EKKO-EBELN.
PARAMETERS : ERNAM LIKE EKKO-ERNAM.
AT SELECTION-SCREEN.
ERNAM = ''.
SELECT SINGLE ERNAM
FROM EKKO
INTO ERNAM
WHERE EBELN = EBELN.
regards,
amit m.

Display "without PGI" & "PGI done not invoiced" in the selection screen

Hi All,
I am preparing a query to track the status of outbound deliveries and would greatly appreciate it if you could guide me on the following requirement.
Is there a way to display the following two fields in the "Selection Screen" of a query (TCode: SQ00).
1. Without PGI (Delivery document saved but the delivery is yet to do a PGI).
2. PGI done but not invoiced (PGI is done but the invoice is not raised).
I have already added, joined LIKP and LIPS and retrieving a host of information from these two tables but stuck on the two points above.
Thanks in advance.

SAP SD_Newbie wrote:
> The user wants these fields in the "Selection Screen" of the query (SQ00).
>
> 1. Without PGI (Delivery document saved but the delivery is yet to do a PGI).
> 2. PGI done but not invoiced (PGI is done but the invoice is not raised).
>
> Importantly, I am a bit reluctant to use any other table apart from LIKP and LIPS (I tried joining other tables but the performance was drastically slow because of too many inner / left outer joins).
I do agree that standard transactions should be considered instead. The users always want the darndest things...
Query is not a custom report and has some limitations, which needs to be understood by the users. We can't add such buttons/checkboxes on the screen in a query, but we can add the status fields as selection criteria.
Since query is at the line item level (LIPS), the statuses also are needed at the line item level, which is VBUP table. WBSTA is GM status, FKSTA is billing status. I'd guess that if WBSTA is 'A' then it's not PGIed and if FKSTA is 'A' then it's not invoiced. But I'd check in your system to make sure the statuses are updated as expected.
VBUP can be joined by primary key, so it shouldn't have a huge negative effect on performance. In any case, this is the only way to deliver such information in a query, I believe.

How to pass value from the Z Report to the selection screen of the std rep

Dear Experts,
i have developed a report and the values are maintained only in internal table based on some condition. When I execute the report, for example MM60, there is a material number field for multiple selection.
the report should call the standard transaction and pass the values from the internal table to the multiple selection- material number of the standard transaction.
the standard transaction should never get executed automatically. Only the value should get passed from internal table to the standard t code. Please help.
regards,
Shankar

Hai
Go through the following Documents
SUBMIT rep.
Additions
1. ... LINE-SIZE col
2. ... LINE-COUNT lin
3. ... TO SAP-SPOOL
4. ... VIA SELECTION-SCREEN
5. ... AND RETURN
6. ... EXPORTING LIST TO MEMORY
7. ... USER user VIA JOB job NUMBER n
8. ... Various additions for parameter transfer to rep
9. ... USING SELECTION-SETS OF PROGRAM prog
Effect
Calls the report rep . Leaves the active program and starts the new report rep .
Addition 1
... LINE-SIZE col
Effect
Prints the report with the line width col .
Addition 2
... LINE-COUNT lin
Effect
Prints the report with lin lines (per page).
Addition 4
... VIA SELECTION-SCREEN
Effect
Displays the selection screen for the user. In this case, the selection screen is redisplayed after return from the report list display - the user's entries are retained.
Addition 5
... AND RETURN
Effect
Returns to the calling transaction or program after the called program has been executed. SUBMIT ... AND RETURN creates a new internal mode .
Addition 6
... EXPORTING LIST TO MEMORY
Effect
Does not display the output list of the called report, but saves it in SAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. You can read the saved list from SAP memory with the function module 'LIST_FROM_MEMORY' and then (for example) store it in the database with EXPORT . You can process this list further with the function modules 'WRITE_LIST' , 'DISPLAY_LIST' ... of the function group "SLST" .
Addition 7
... USER user VIA JOB job NUMBER n
Effect
Schedules the specified report in the job specified by the job name job and the job number n . The job runs under the user name user and you can omit the addition USER user . The assignment of the job number occurs via the function module JOB_OPEN (see also the documentation for the function modules JOB_CLOSE and JOB_SUBMIT . This addition can only be used with the addition ...AND RETURN .
Note
When scheduling a report with the SUBMIT ... VIA JOB job NUMBER n statement, you should always use the addition ...TO SAP-SPOOL to pass print and/or archive parameters. Otherwise, default values are used to generate the list and this disturbs operations in a production environment.
Addition 9
... USING SELECTION-SETS OF PROGRAM prog
Effect
Uses variants of the program prog when executing the program rep .
Note
Important
The programs prog and rep must have the same SELECT-OPTIONS and PARAMETER s. Otherwise, variants of the program prog may be destroyed.
Note
When using this addition, the specified variant vari of the program prog is taken in USING SELECTION-SET vari . On the other hand, all variant-related actions on the selection screen of rep (Get , Save as variant , Display , Delete ) refer to the variants of prog .
Example
SUBMIT REPORT01
VIA SELECTION-SCREEN
USING SELECTION-SET 'VARIANT1'
USING SELECTION-SETS OF PROGRAM 'REPORT00'
AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00 .
Note
Runtime errors
LOAD_PROGRAM_NOT_FOUND : The specified program was not found.
SUBMIT_WRONG_TYPE : The specified program is not a report.
SUBMIT_IMPORT_ONLY_PARAMETER : Only one value passed to a report parameter.
SUBMIT_WRONG_SIGN : Invalid value passed to a selection with the addition SIGN .
SUBMIT_IN_ITAB_ILL_STRUCTURE : Table passed to a selection with WITH sel IN itab had an unexpected structure.
Try with this Example
Data: listobject like abaplist occurs 1 with header line.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1 .
IF sy-subrc <> 0.
message ID '61' TYPE 'E' NUMBER '731'
with 'LIST_FROM_MEMORY'.
ENDIF.
Thanks & regards
Sreenivasulu P

SUBMIT a report without showing the selection-screen

Similar Messages

Maybe you are looking for