Suggest if I can use FM 'SAP_CONVERT_TO_TEX_FORMAT'
Hi,
I have a requirement where I need to download the data in the internal table say it_tab into UNIX/PC as .CSV file.
For PC first I used FM 'SAP_CONVERT_TO_TEX_FORMAT' which converted the data in it_tab into another table say it_trux. Then I used it_trux in my FM 'GUI_DOWNLOAD' to download to file.
For unix file transfer I looped at the internal table it_tab and inserted each record into the file using 'CONCATENATE ... SEPARATED BY c_comma'. Later for this also I used the same FM and simply looping at it_trux to transfer the contents to the unix file instead of above procedure.
Both are working fine, but when I use FM 'SAP_CONVERT_TO_TEX_FORMAT' , from what I've seen in output screen, it seem like the FM taking time (it shows like 1,2,3... n at below bar, until all rows are converted).
I'm worried because the amount of data will be huge when it's moved to production.
So please suggest if I should go with the FM or 'CONCATENATE ... SEPARATED BY c_comma' to convert the data.
Regards,
Manoj Kumar P
the CONCATENATE method will be something like 20 times faster
but you won't have conversion of all fields
if you know there no or few fields to convert, then go for a CONCATENATE and a "manual" conversion of those fields
Similar Messages
-
after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you
Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H. -
Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?
Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.
Hi Jay,
SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
once on each server, and then the variable can be used by all the packages on this server.
Regards,
Mike Yin
TechNet Community Support -
How do I change a default from feathered edge to sharp edge when I select a path?
I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an image on a photograph to use in another document and I need a hard edge on it, not a feathered one.In the Paths panel, click the flyout menu (in the top right of the panel) and choose Make Selection (this option will only be available if you have a path selected). Reduce the Feather Radius to 0 (zero) and click OK. This setting will be the default even when clicking the Load Path as Selection button.
-
Every time I start my Apple TV it shuts down. I have to unplug it and wait for it to reboot before I can use it. This makes turning on Apple TV a very long process. Any suggestions?
That would be very hard to do, as I would have to do a lot of things--including moving furniture to get at the back of a receiver--and I'm not at all sure that the receive could accommodate it.
The process is like this: I dial the receiver to the Apple TV input. The light comes on, like it's connecting, but then the Apple TV goes dark before any connection happens. Then I unplug the power cord, wait a few moments, and plug it back in. Then the Apple TV actually connects, but only after a full reboot (setting time, etc). -
I need to down convert MXF files so I can use Premiere 11. Any suggestions?
I need to down convert MXF files so I can use Premiere 11. Any Suggestions?
https://www.google.com/#q=convert+mxf+to+avi
-
Can any one suggest me how to use drawPixels method for 40 series devices
Hello!
I am using drawPixels method of DirectGraphics class the code I have written is :-
Image offscreen=DirectUtils.createImage(width,height,0x00000000);// width and heights are integer value
public final int MODEL=DirectGraphics.TYPE_INT_8888_ARGB ;
Graphics offgra = offscreen.getGraphics();
DirectGraphics directgraphics = DirectUtils.getDirectGraphics(offgra);
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,MODEL); // imgData is a int array(int imgData[]) which contains required pixels of image.
The above code is working fine with NOKIA 60 series device but when i use it with NOKIA 40 series device it gives java.lang.IllegalArgumentException.
same time if i use :-
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,DirectGraphics .TYPE_USHORT_4444_ARGB ) ;
// imgData is a short array(short imgData[]) which contains required pixels of image. i have used different formet here.
it works fine with 40 series device,
can any one suggest me how to use drawPixels method for 40 series devices with format
DirectGraphics .TYPE_INT_8888_ARGB .If Remote wipe is activated it can't be undone. And Once the Wipe is done, the device can nö longer be tracked.
Sorry. -
Ipad2, I can not sign in to imessage after turning it off and doing a hard reboot. Upon entering my info it states no network connection, but I can use it o surf in Safari and iter websites. Any suggestions. Went on with Apple, they think its my network. All other wireless equipment can ign on without problems. This happened after I turned imessage off.
Step by step, how did you arrive at seeing this agreement?
-
Hi everyone, Im trying to figure out how I can unlock my iphone 4s. I purchased it in Japan under AU KDDI and i finished my contract, im having trouble unlocking it so I can use it in India. Any suggestions?
Only the carrier to which it is locked can do it. Contact them.
Please don't use that font. It makes your post difficult to read and people are less likely to take time to read it and help you. -
Hi, I am Karan Bir from India. Can I buy unlocked iPhone 4s from US and use it in India? It is not officially announced in India and will be available in November in US. Please suggest me how can I buy it?
Plz Don't Buy It. At least not right now. We're having problems with the unlocked iPhone in India. Check this thread link then you'll know what I'm talking about !
https://discussions.apple.com/message/16632307#16632307 -
I asked at the Apple store and they said I could use any camera. When I look at the cameras on Amazon they seem to all be Windows based so I am confused. Any suggestions?
We've used the Logitech quickcam Vision Pro for Mac on our mini, with 10.6, and ichat, which has worked well. Looks like it's discontinued, however, a number of sellers on ebay are selling them new for $60-$70.
-
I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?
Welcome to the Apple Community.
It's do-able, but I don't think it's a great idea.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances) -
When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
Please help!It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.
-
When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.
You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps -
How many iPads can use one content viewer login?
Hi all,
We have a client who is wanting an app built in the next few months but needs a smaller version up and running in the next few weeks to get them out of a tight spot.
I've suggested that we give them an Adobe ID seperate to ours and load the interim app up there for reps use while we keep building the final one seperately.
My question is, how many iPad's can use that login and download the app to the content viewer and use it like that. They will need to use it on about 40 iPads...
(I hope my question makes sense)
Cheers
G.Unfortunately the only time an Adobe ID belongs to the company instead of the individual is when the company signs on as a DPS customer and creates the ID under their master admin account in the DPS admin portal. All other uses of Adobe ID belong to an individual and not a company. In short, Adobe tech support isn't going to be able to help a company "reclaim" an Adobe ID if it is used this way.
Just fair warning for those that are sharing Adobe ID credentials and using this method to share content.
Maybe you are looking for
-
Pictures Not Viewable When I FORWARD E-Mails
Hello, Something weird happening when I try to forward emails with photos. They don't show up on the recipient side. This is annoying when you are trying to send family photos around the family that come to you! Thanks in advance... ~amy
-
HTML form data goes into an Access database. This code: <cfif isDefined("URL.Add")> <cfinsert DATASOURCE="eval" TABLENAME="tblGeneralEval" FORMFIELDS="SCHD_ID,date,class,instructor,rotrain_id,stuname,GQ1,GQ2,GQ3,GQ4,GQ5,GQ6,GQ7,GQ8,GQ9
-
Is it possible to cut a photo? I mean, not in a square, but one specific part of the photo
I need to make a Amnesty International thing for school. I found an photo of a boy with a gun. I need that boy and the gun, but i dont need the background. Is it possible to cut the boy out with iPhoto?
-
In PS CS4 Mac I used to be able to print the full doucment info that appears in the title bar, including the currently selected layer/group. This would print at the top of my document and might look like: File Name.psd @ 100% (layer name, RGB/8) I al
-
How do I load this program onto my PC? I just bought it about 2 weeks ago.
How can I tell if this program is loaded onto my computer? I need to download a user manual or something so I know how to use it now that I have purchased it.