[svn] 3165: LCDS Portal support - change the reference to Application to

Revision: 3165
Author: [email protected]
Date: 2008-09-10 08:45:16 -0700 (Wed, 10 Sep 2008)
Log Message:
LCDS Portal support - change the reference to Application to
mx.messaging.config.LoaderConfig which is the correct way to
get parameters to the application.
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

Hi suri55,
The parameter is applySTLogin and it is documented here: http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/b32416/upgrd_8.htm#BABCJCGI
The example URL it gives looks a little suspect - there shouldn't be any spaces in it.
Regards,
Colin

Similar Messages

Can I create a keyboard shortcut to change the reference point? (Mac CS6)

I'm forever changing the reference point during a job and the tiny squares are a nightmare (my eyes aren't what they used to be), a shortcut to change it from the centre to top left would be great.
Cheers
Mark.

@Mark – and here an overview of all available options:
AnchorPoint.BOTTOM_CENTER_ANCHOR
The center point on the bottom of the bounding box.
AnchorPoint.BOTTOM_LEFT_ANCHOR
The bottom left corner.
AnchorPoint.BOTTOM_RIGHT_ANCHOR
The bottom right corner.
AnchorPoint.CENTER_ANCHOR
The center point in the bounding box.
AnchorPoint.LEFT_CENTER_ANCHOR
The center point on the left side of the bounding box.
AnchorPoint.RIGHT_CENTER_ANCHOR
The center point on the right side of the bounding box.
AnchorPoint.TOP_CENTER_ANCHOR
The center point on the top of the bounding box.
AnchorPoint.TOP_LEFT_ANCHOR
The top left corner.
AnchorPoint.TOP_RIGHT_ANCHOR
The top right corner.
Uwe

How to change the reference of a Workbook to a Query

I have a Query Q1 and I have a workbook W1 for this query in 3.5, I copied query Q1 to a new Query Q2, and copied workbook W1 to a new workbook W2. (using RSZC)
Now I have Queries Q1 and Q2 and Workbooks W1 and W2. But as the workbook W2 is a copy of W1, it still has the reference to query Q1. Is there any way to change the reference of a workbook to a query ?
My requirement is, workbook W2 should refer to query Q2.
Appretiate your help.
Regards,
R. Vodnala

Go to design mode of the second workbook and change the query using the edit option to Q2 then your workbook W2 will refer to query Q2
Just to get the idea go through this link here it is shown how to change the query.
https://wiki.sdn.sap.com/wiki/display/BI/Issue%20with%20Migrating%20BEx%20Query%20and%20Workbook

Changing the reference infoObject

Hi,
Is it possible to change the reference characteristic of an infoObject?
We need a complete change of the reference characteristic (from 0CO_AREA to a different infoObject) rather than just changing the attributes of the current reference characteristic.
Any help with this is greatly appreciated.
Best regards,
Barry

hi,
You cannot change the reference char for an info object. You need to modify the reference object like you can change attr and then use in your info object.
Thanks
Lavanya

After i changed the setting in application tab in options : open pdf doc by adobe by default, the "Ask" window still pop up every time. How to fix this ?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/913026]]</blockquote>
after i changed the setting in application tab in options : open pdf doc by adobe by default, the "Ask" window still pop up every time. How to fix this ?

How do I fix this problem ...javascript (cid) applications.

In portal branding change the font colour of the popup dialog box

hi all,
I created a theme of mine and changed the portal body colour to a dark shade. The porblem i am facing is..whn i click on the "Logout" button of the portal,it displays a popupbox saying "Are you sure you want to logg off?"...i want to change the font color to white as it is black in clour and not reaadable in the dark background colour.......can somebody help me in this ..
Awaiting for your response..

Hi.
First solution is customizing logoffConfirmMsg.jsp (com.sap.portal.navigation.masthead.par) for your personal needs, but some coding is required.
Second solution:
1. adjust the color property of class .ctrlTxtStd in ctr_ie6.css and/or ctrl_nn7.css files from your theme:
.ctrlTxtStd {
            color:#ffffff;
            font-family:Arial,Helvetica,sans-serif;
            font-size:0.7em;
            font-style:normal;
            font-weight:normal;
2. If you edit css files directly on portal's file system, the restart of portal will be required.
3.After portal or your theme updates repeat steps 1 and 2.

Displaying error message on XRPM Portal on changing the status of Project

Hi All,
I want to display an error message on the Portal when user tries to change the status of the Project from 'CREATED' to 'RELEASE' and clicks on SAVE.
I have checked the following BADI's but i am not able to retrieve the newly selected status.
DPR_ATTRIBUTES -> Methods 1) CHECK 2) CHANGE_CHECK
RPM_PROJ_CUST_FIELDS
Any help will be highly appreciated!
Thanks.
Runal.

Hi Runal,
I think, the reason is that the status is not attribute of the project, rather a linked object. That is why the Badi method is not get called.
Please check with the Badi DRP_EVENTS, this Badi is typically called, if the status of object is changed.
Kind regards,
Zhenbo

[svn:fx-4.x] 14837: Changing the way data tips are rendered in when mirrored.

Revision: 14837
Revision: 14837
Author:   [email protected]
Date:     2010-03-18 00:26:27 -0700 (Thu, 18 Mar 2010)
Log Message:
Changing the way data tips are rendered in when mirrored.
Single data tip shows to left in RTL now which shows to right in LTR
Callouts connecting datatips to chart items are also modified.
QE notes:
Doc notes:
Bugs: FLEXDMV-2347 ( Datatips cluterred in bubble chart when layoutDirection=rtl)
FLEXDMV-2348 ( Position of datatips not changing WRT layoutDirection)
Reviewer:
Tests run: checkintests
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXDMV-2347
    http://bugs.adobe.com/jira/browse/FLEXDMV-2348
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/datavisualization/src/mx/charts/chartClasses/Ch artBase.as

Setting Lightroom's preview size to larger than screen resolution is guaranteed to slow things down. I have a dual monitor system whith Lightroom showing the loupe on one screen and the grid on the other. The screen sizes are 1920x1080 and 2560x1440. Following your practice for previews would bring my system to a crawl and I have an entry level workstation.All my previews are of standard 1024x768 in size. The only delays in viewing come when Lightroom is asked to display an image where there is no preview. Once the preview has been created, browsing is near instantaneous.
I beg to differ! The reason is that a preview can be used for any size, which is smaller than that of the preview. Scaling down a preview can be done with little or not loss in quality compared to getting the full resulution and scale that down. Scaling up is not possible.
In your case, you will not use the previews of 1024x768 at all for full screen display. Instead you will force L3 to create bigger previews the first time you open the photo. You could try this by generating the standard previews for new imported photos before you start browsing. Then try to browse. You will probably get the "Loading" message, which indicates that the preview was not used and another one with higher resolution will be made. Then try the same experiment, setting the size of the standard preview to 2048. If, and only if, the size of your display area is not more than 2048 pixels wide and you display a photo in lanscape orientation, you will be able to browse without delay after generating the standard previews.
If I understand your setup correctly, you display the photos in a window of 2560x1440 pixels. I suspect that only 1:1 previews could be used for that. I think Adobe should increase the maximum size of the previews to a value larger than 2048, so that you are not forced to use only the 1:1 previews.
I agree, that when the previews have been generated, browsing is near instantaneous.

[svn:fx-4.x] 15097: Changing the position of drag proxy

Revision: 15097
Revision: 15097
Author:   [email protected]
Date:     2010-03-29 06:22:57 -0700 (Mon, 29 Mar 2010)
Log Message:
Changing the position of drag proxy
QE notes:
Doc notes:
Bugs: FLEXDMV-2365 ( When layoutDirection is 'rtl', image of the chart item which is being dragged is seen away from mouse pointer)
Reviewer:
Tests run: checkintests
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXDMV-2365
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/datavisualization/src/mx/charts/chartClasses/Ch artBase.as
    flex/sdk/branches/4.x/frameworks/projects/datavisualization/src/mx/charts/chartClasses/Ch artItemDragProxy.as

MoonSwan wrote:I've never heard of a validating editor but I was recently wondering what exists that could help me. Aside from emacs, what should I search for to find one of these validating editors?
You can use whatever tool you prefer - for someone already using emacs, emacs is a natural choice. Simple, easy to use online tools exist e.g. http://schneegans.de/sv/
Just upload the file in question ('Validate by file upload' option) and click 'Validate':
The '=' character cannot be included in a name. (723:10)
<Terminal="Terminal">
^
Googling 'xml validation' should give you some more tools / services if this one is not good enough.

[svn:fx-3.x] 7852: Changing the fix for SDK-19811 as the E4X escaping behavior is dependent on the target player (i.e.

Revision: 7852
Author:   [email protected]
Date:     2009-06-15 13:34:23 -0700 (Mon, 15 Jun 2009)
Log Message:
Changing the fix for SDK-19811 as the E4X escaping behavior is dependent on the target player (i.e. swfVersion) rather than the version of the runtime.
QE: Yes, please test --target-player=9 and 10, and AIR
Doc: No
Checkintest: Pass
Reviewer: Svetlin
Bugs: SDK-19811 - SOAPEncoder double-encodes string values in AS proxy code generated from .NET webservices
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-19811
    http://bugs.adobe.com/jira/browse/SDK-19811
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/managers/SystemManager.as
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/messaging/config/LoaderConfig. as
    flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/rpc/xml/XMLEncoder.as

I checked my java version on my mac, and its 1.3.1.
So I thought that I would update my pc's java to 1.3.1.
After doing that, and verifying that it was updated,
I still get the s ame exceptions when I use backspace
on a new font!!! I just don't get it.
Maybe it doesn't have to do with the java version, maybe its a computer
setting or something. I'd switch to the mac and program
it on that, however that seems ridiculous that it
would refuse to work on my pc. Any suggestions?
im running win98 SE on the pc, if that helps anyone.

[svn:fx-4.x] 14731: change the line ending to LF so this script will run properly on Mac and Unix .

Revision: 14731
Revision: 14731
Author:   [email protected]
Date:     2010-03-12 11:06:04 -0800 (Fri, 12 Mar 2010)
Log Message:
change the line ending to LF so this script will run properly on Mac and Unix. Some testsuites were breaking because this script was not executing properly on mac
QE notes: fix for testsuites
Doc notes: no
Bugs: no
Reviewer: no
Tests run: no
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/branches/4.x/bin/fontswf

On reflection, it seems much easier/safer to do something like this instead...
When running in Arch, but viewing a partition with another installation's data on it, do directory listings like this:
ls -l | FILTER
where FILTER is a script that pulls out the Arch-announced users and groups, converts them to numeric if necessary (according to Arch's understanding), and then stuffs back in what the other installation thinks are the symbols corresponding to those numbers. This was easy enough to do, and doesn't risk breaking anything.
Marking as SOLVED, but I'd still welcome feedback about the different ways different distributions understand the groups I cited. It's very hard to track this info down.

How to make use of Portal service in the web dynpro application

hi
I have some portal service and how to use that in the web dynpro application.
and also what is the main diff between Portal Component and web dynpro application.
do we required portal to run web dynpro application.
thanks
mmukesh

Hi,
>> I have some portal service and how to use that in the web dynpro application.
Yes. U can use Portal service in webdynpro. Check the link given by subathra.
>> and also what is the main diff between Portal Component and web dynpro application
Portal Components are components designed to run in portal server while webdynpro application can run in J2EE WebAS.
>> do we required portal to run web dynpro application.
No for general cases. Just WebAS is sufficient to run webdynpro appl. But if u use portal service in ur webdynpro appl, then make sure both (portal service and webdynpro appl) run on same J2EE engine. That is mandatory.
Regards,
Vijai

Can I change the list of applications in the dictation commands list?

Dictation commands only has the applications present at time of Yosemite installation and doesn't add or delete them. How can I change the list?

There is an Apple info sheet entitled "OS X Yosemite: Use Dictation Commands to tell your Mac what to do." It shows you a lot of existing commands and also how to add your own new commands. :-)
That :-) above was added using the Apple dictate system.
Sorry I don't have a link.
Mauruy56

Changing the Crystal 2008 application color

Hi there,
Would someone tell me if it there is a way to change the color of the Crystal Reports 2008 application?
Whatever possessed them to go with a light blue for the tool, then have all the text in a darker blue and all the icons with a blueish tinge?
This is an example I took off google : http://upload.wikimedia.org/wikipedia/en/6/6b/CrystalReports2008.png
Their icons aren't as faded as mine though but still appear heavily based off blue.
I can't look at it without getting a headache. It's as if I can't help but overfocus and everything just ends up blurry and I feel sick.
Is it possible to change this?
Thank you,
Philippe

Hi
We can't change the default color of CR.
May be you can try adjusting the screen resolution so that they look brighter.
Regards
Sourashree

Change the password oracle applications

Hello
can i change the oracle applications OPERATIONS user password.any help regarding solving this issue is highly appreciated
Regard,s
Umair

Hi Umair;
Yes u can change. Please check Hussein Sawwan greatest previous post about same topic
Vision database default operations user
It will answer you
Regard
Helios

[svn] 3165: LCDS Portal support - change the reference to Application to

Similar Messages

Maybe you are looking for