[svn] 3410: Here are some changes to DataGroup.

Revision: 3410
Author: [email protected]
Date: 2008-09-29 15:27:50 -0700 (Mon, 29 Sep 2008)
Log Message:
Here are some changes to DataGroup.
The big change is the way we instantiate components. We aren?\226?\128?\153t re-using the Group logic anymore. This means there?\226?\128?\153s no display object sharing going on, which reduces the complexity of the code. It also treats renderers differently now. Basically anytime a renderer is specified, it?\226?\128?\153ll attempt to wrap you up in that renderer, even if you are a GraphicElement or a DisplayObject and may not need one.
There are some other changes, like changing an itemRenderer at runtime now works. It?\226?\128?\153s a bit heavy in what it invalidates right now, but I?\226?\128?\153ll go back and revisit some of this logic.
Also, when no dataProvider is given, we don?\226?\128?\153t automatically create one for the user. This means I had to add some defense mechanisms where we were relying on the dataProvider, but doing a check for dataProvider != null was all that was really needed.
QE: Yes
Doc: Yes
Bugs: SDK-16809, SDK-16983
Reviewer: Glenn
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16809
http://bugs.adobe.com/jira/browse/SDK-16983
Modified Paths:
flex/sdk/trunk/development/eclipse/flex/flex4test/src/flex4test.mxml
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/Selector.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/DataGroup.as

Hi there,
We had a glitch on our side that was causing some accounts to not be able to log in properly. It should now be resolved. Please clear your browser's cache and try it again. Let us know if it's working for you.
Regards
Mike

Similar Messages

FINALLY - Boot Camp 2.1 Installed Successfully. Here are some stats....

Well, I believe I have finally successfully installed Boot Camp 2.1 for Windows Vista 32-bit on a MacBook Pro. After trying last Friday to install it, failing miserably, and a weekend spent reinstalling operating systems, etc. I feel a bit better. Although, these problems shouldn't have to happen to begin with, in my opinion.
I have learned to backup even more religiously than I have before -- you don't know how many restore points, complete PC backups, etc. I have done over the past few days.
Anyway, here are some stats that I would like to compare with other folks to make sure that I have everything that this update was supposed to offer. I wish Apple would provide the details about the update, but they don't. Here are my statistics, many probably Windows Vista 32-bit specific.
_Miscellaneous Notes_
I have a MacBook Pro 2.2 GHz, 15", 4 GB RAM -- I bought it in June 2007 (I forget what the chipset is - Santa Rosa? - but it was a new model then)
I have Vista Ultimate 32-bit
I had Vista SP1 installed before installing the BC 2.1 update
I did not have any other language packs installed
If I right click on the Boot Camp icon in the taskbar and say "About", the version I see is Version 2.1 (Build 210A12)
Drivers
Apple Built-In Bluetooth: 4/6/2008, version 2.1.0.1
NVIDIA GeForce 8600M GT: 1/24/2008, version 7.15.11.6763
Apple Keyboard: 3/10/2008, version 2.1.0.0 (I had two of these listed)
Apple Trackpad: 8/28/2007, version 2.0.1.4
Apple IR Receiver: 11/1/2007, version 2.0.1.1
Built-in iSight: 6/21/2006, version 6.0.6001.18000
Apple Trackpad Enabler: 8/28/2007, version 2.0.1.4
Atheros AR5008X Wireless Network Adapter: 4/15/2007, version 7.2.0.204 (there may be an update to this that I haven't installed yet)
Marvell Yukon 88E8058 PCI-E Gigabit Ethernet Controller: 3/23/2007, version 10.12.7.3 (there may be an update to this that I haven't installed yet)
Realtek High Definition Audio: 11/14/2007, version: 6.0.1.5512 (Note: This was disabled after the install of BC 2.1. I had to reenable it in the device manager. I think maybe my virus scanning program might have done something, but I am not sure)
Note: I had 3 monitors listed in my Device manager, but I only have two -- the laptop monitor and an external monitor connected to it. That is weird, I think.
_Windows Experience Index_
Processor: 5.1
Memory (RAM): 4.8
Graphics: 5.9 (This might have went up with the new driver, I don't remember)
Gaming Graphics: 5.4
Primary Hard Disk: 4.6
Base Score: 4.6 (because of hard drive)
_Final Words_
This wasn't a smooth update at all by any means.
I hope this helps a little. Please let me know if you have the same sort of statistics.
Thanks.
Message was edited by: jmFightSpam
Message was edited by: jmFightSpam
Message was edited by: jmFightSpam

In my quest to figure out why my keyboard backlighting is not working, I decided to extract the BC 2.1 installer using 7-zip to see all of the individual drivers separately. Now, I don't know which driver is for the keyboard backlight, but I did try to install the TrackPad separately, and guess what, the original installation did not update the trackpad driver for some reason.
So now the the stats for the Apple Trackpad are:
10/9/2007, version 2.0.1.5

How many books are approved a day - here are some stats

Do you want to know why it is taking forever to get your iBook approved? Do you wonder how many books are actually approved per day? I was asking myself the same question and because Apple doesn't release any numbers, I monitored the numbers on the iBookstore recently to get an idea.
Here are the numbers (just to get a rough idea, not scientifically proven)
The iBookstore has finally a feature that lets you browse only iBooks (aka Multi-Touch Books). It displays the numbers of all available Paid and Free iBooks. That is what I was monitoring each morning.
When I started to monitor the iBookstore on May15th it had a total of 3,217 iBooks. If you use January 19th as the start date, then Apple would have approved an average of 26 books a day.
Now here is a table where I wrote down the number from the iBookstore each morning of that day. The two columns next to it show the difference (how many approved that day) and the total number of approved iBooks (paid and free)
There are a few interesting conclusions you can draw from the numbers.
* You see a drop over the weekend. Maybe that is proof that the department is located in the US and not in China or India.
* The approval numbers fluctuate but the average is about twice as high as the 26 books from the original start. So they must have hired more staff (or reading faster)
* Interesting that there was a big junk of free iBooks yanked off the bookstore
Another unscientific info about the bestseller ranking from my own stats.
With about 10 sales a day I land in the 30s rank.
WIth about 2 sales a day it ranges from number 50-100
Those numbers fluctuate wildly and I'm sure there are other factors (i.e. total sales) in that calculation.
It would be interesting to hear numbers and experiences from other users.
Edgar Rothermich
DingDingMusic.com

I looked up the number of book titles per category in Apple's and Amazon's bookstores yesterday:
Category
Amazon
Apple
Percent
Professional & Technical
107804
360619
26.98%
26.98%
Fiction & Literature
20700
227773
17.04%
44.02%
Reference
49942
95433
7.14%
51.16%
Business & Personal Finance
78007
76608
5.73%
56.89%
Halth, Mind & Body
63303
4.74%
61.63%
History
244585
51904
3.88%
65.51%
Religion & Spirituality
123177
49448
3.70%
69.21%
Romance
82851
48581
3.63%
72.85%
Children & Teens
67825
47718
3.57%
76.42%
Nonfiction
46908
3.51%
79.93%
Mysteries & Thrillers
64773
41776
3.13%
83.05%
Sci-Fi & Fantasy
60828
39861
2.98%
86.03%
Arts & Entertainment
71065
37874
2.83%
88.87%
Biographies & Memoirs
60365
33643
2.52%
91.38%
Science & Nature
87395
27825
2.08%
93.47%
Computers & Internet
29770
17558
1.31%
94.78%
Politics & Current Events
33551
17461
1.31%
96.09%
Travel & Adventure
21181
11874
0.89%
96.97%
Cookbooks, Food & Wine
8593
0.64%
97.62%
Sports & Outdoors
20909
8443
0.63%
98.25%
Lifestyle & Home
73509
8082
0.60%
98.85%
Humor
30506
7265
0.54%
99.40%
Comics & Graphic Novels
4559
0.34%
99.74%
Parenting
27879
3407
0.25%
99.99%
Textbooks
100
0.01%
100.00%
1356622
1336616
These numbers are upper bounds, as book titles can be in up to three categories. So the real number of unique titles is probably closer to 1/3 or 1/2 of the 1.33 million, which is close to K T's 700,000 number.
Amazon and Apple are similar in total number of titles (with a few different categories). I had expected there to be much less titles in the Apple bookstore compared to Amazon. So selection size isn't much of a differentiator anymore. That said, number of sales are still far higher in the Amazon store. Many early eBook adopters still prefer their Kindle over the iPad when looking for new eBooks.

You want ideas for skype? Alright, here are some.

According to "Claudius", in http://community.skype.com/t5/Windows-desktop-client/Wanted-Your-Skype-for-Windows-Desktop-ideas/td-.... We should be giving our ideas. Well, I have a few, after updating to 6.22, even more so.
Idea 1. Stop taking advice from Microsoft to make skype an even more ugly pile of .... Well, you know. No one wants their desktop skype to look like it was ported from a phone. Seriously, I don't know if I can continue using skype anymore. I'm gonna have to convince my 200+ contacts to start using something else, which won't be hard once they all update to 6.22. You've made it even easier for me to get people away from skype. Thank you.
Idea 2. Bring back skypekit.exe, or at least bring back something that external messengers like Trillian and Pidgin can use to connect to the skype service again. I used Trillian to connect to skype for years, because unlike Skype, Trillian has always provided a number of customizable views and options for chatting with friends. I was able to change my window color, background and all, I was able to keep my windows seperated, or tabbed, I was able to organize people into specific groups to easily keep track of who I met where. Now, all I have is this big long ugly list of contacts that can't be sorted or anything, and my window is one big solid color of white with the uglyness of Windows 8. I can't even change my text fields back so they don't appear in bubbles anymore.
Idea 3. Add a "feedback" button to the client of all skype clients, so we can provide feedback about each new update or report problems without ever having to go to this community.
Idea 4. Actually participate in the community, stop saying you want ideas when you aren't around to read them or care what any of us have to say. I doubt you've ever actually considered anything anyone has ever suggested here. All you do is get your orders from Microsoft now, which is basically "How can we ruin skype further? Oh I know. Make the skype devs do this. Cause we own them now. HA HA HA HAAAA"
Idea 5. Add an un update button! This is especially useful when you make a flop as bad as 6.22, so now I have to go find an external source to get 6.21 back. Also log the amount of people that use the un-update button. Then maybe you'll figure out what you did wrong and you know. NOT DO IT AGAIN.
Seriously, I feel like Skype has abandon PC users. They don't care about computers anymore, seems like they only want to develop for phones now and thus they canceled skypekit.exe for no reason whatsoever, and changed skype into a phone only thing with a desktop port. It's worse than those console ports where a game is ported to PC directly from console. Will any skype devs see this? Probably not. Too busy finding the next thing in skype to destroy. Oh, destroy share screens next! Or perhaps you should destroy video calls. Then you should destroy the ability to connect so we can finally get everyone away from skype to someone who'll actually listen to the people and not to the big marketing team that claims to know what people want but doesn't actually have any ----ing clue (Microsoft)!
Enjoy your rant, filled with ideas. Horray. I am very disappointed in you skype devs, for letting Microsoft buy you so they could ditch their old crappy messenger that no one wanted anymore, just so they could do the same thing to skype. After they finish sucking the life out of skype, they'll go buy some other poor defenseless messenger to destroy.

The old *#7370# code is a soft reset.
The usual key combination for a hard reset, '3', '*' and 'call' pressed while powering up, is not possible since there is no '3' or '*' key on the 5800XM (touchscreen phone).
as pointed out by grschinon
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Here are some extremely severe problem of lumia

There are several severe problems have not solved by nokia. One of these important things mentioned by customers was "Data Sense". This is an important feature for all of the customers, to know how much data they used. In addition, there is a link talked about that
http://discussions.nokia.com/t5/Nokia-Lumia/How-can-i-get-Data-Sense-or-Nokia-counter-from-WP8-Store...
said the problem has been solved. However, there is no solution.
Some one just said it is depending on carrier and nokia take no responsibility for that... Why Nokia hold this attitude to your customer? Are there any solution you can give us? The store even has no similar software for that.
I don't want to mention there are so much functions are locked, and we have no choice to do it by ourselves. Could I change the system to other countries to solve those problems? or give us a schedule but NOT "later" or "at the end of year" how and when this company unlock those functions for their nokia follower

You think it's important to 99% of Windows Phone users but seeing how this issue is hardly ever brought up and generally if it does the same bunch pops in to comment it's more likely to be a single digit number if that.
Would data monitoring be useful? certainly, especially where unlimited or affordable large data plans are rare.
Is it a dealbreaker? hardly, at least not in general.
Do I think Nokia should provide the previously available tool for WP8? Yes they should
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

New user, got the iPhone on Friday 22nd, Here are some questions & comments

I got the 8 GB iPhone. The AT&T sales girl was very helpful. My first question is about syncing with my MBP. The first sync went OK, I did have to get Apple tech support on the line or I would not have been successful. However, It all worked as it was supposed to work. The sales girl told me that when I did a sync that would move data from the computer to the iPhone but not from the iPhone to the computer in iCal. That seems a bit dumb since many times I use my Treo, which quit working, to make calendar entries while I am away from my computer and then can connect to my computer and update iCal. On another forum there was a long discussion of how to do a work around.
This morning I connected my iPhone to my MBP. The iPhone lit up, I slid it unlock and nothing more happened. I opened iTunes and still nothing happened. I had expected iTunes to open automatically. Once I opened iTunes, I expected a button to appear on the iTunes window. Nothing. I did find an item under the file menu that said something like "sync iPhone", I selected that and as far as I could tell nothing happened. What am I missing?

The sales girl told me that when I did a sync that would move data from the computer to the iPhone but not from the iPhone to the computer in iCal.
Not true.
Check this link.
http://docs.info.apple.com/article.html?artnum=306071
Are you running the current iTunes version?
To each his/her own but I prefer not having iTunes sync my iPhone or iPod automatically when connected since I often want to make a change or two, or confirm settings and then selecting sync.
If you have iTunes preferences and your iPhone preferences set to sync automatically when your iPhone is connected, it should do so.

My macbook pro is running very slow after upgrading to version 10.9.1 Here are the results of running EtreCheck:

I am running very slowly after upgrading to ver 10.9.1 on my macbook pro. Can anyone help me to solve this problem. I am including the results from running Etresoft.
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.53 GHz Intel Core i5 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics - VRAM: 288 MB
          NVIDIA GeForce GT 330M - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
          ChmodBPF: Path: /Library/StartupItems/ChmodBPF
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:53:49
Disk Information:
          Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (200.83 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS23N
USB Information:
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Internal Memory Card Reader
          Western Digital My Passport 071A 1 TB
                    EFI (disk1s1) <not mounted>: 209.7 MB
                    Backup (disk1s2) /Volumes/Backup: 999.83 GB (622.71 GB free)
          Apple Computer, Inc. IR Receiver
          Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.kodak.aio.kcpconnector.plist
          [loaded] com.leapfrog.connect.shell.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.sonos.smbbump.plist
Launch Agents:
          [loaded] com.kodak.BonjourAgent.plist
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.kodak.KODAK AiO Firmware Updater.plist
          [loaded] com.kodak.KODAK AiO Software Updater.plist
          [loaded] com.kodak.StatisticCollection.plist
          [loaded] com.spotify.webhelper.plist
          [loaded] uk.co.markallan.clamxav.freshclam.plist
User Login Items:
          Monitor
          ScanSnap Manager
          Evernote
          Dropbox
          AdobeResourceSynchronizer
3rd Party Preference Panes:
          Flash Player
          Growl
Internet Plug-ins::
          Flip4Mac WMV Plugin: Version: 2.3.8.1
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 10.1.8
          AdobePDFViewer: Version: 10.1.8
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
          Silverlight: Version: 4.0.51204.0
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins::
          Google Earth Web Plug-in: Version: 7.1
          Dashlane: Version: Dashlane 1.0.0 - SDK 10.7
Bad Fonts:
          None
Old applications:
          AiOFirmwareUpdater:          Version: 7.7 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/AiOFirmwareUpdater.app
          Install Spotify:          Version: 1.0 - SDK 10.5
                    /Users/jimschindler/Downloads/Install Spotify.app
          KODAK AiO Home Center:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Home Center.app
          KODAK AiO Scan:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Scan.app
          KODAK AiO Software Updater:          Version: 7.7 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Software Updater.app
          KODAK AiO Uninstall:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/KODAK AiO Uninstall.app
          Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
          Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
          Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
          Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
          Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Document Connection.app
          Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
          Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Excel.app
          Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
          Microsoft Outlook:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Outlook.app
          Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
          Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
          Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
          Microsoft Word:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Word.app
          My Day:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/My Day.app
          Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
          Registration:          Version: 7.7.3 - SDK 10.5
                    /Library/Printers/Kodak/AiO_Printers/Registration.app
          Solver:          Version: 1.0 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          Spotify:          Version: 0.8.4.124.ga3559d86 - SDK 10.5
                    /Applications/Spotify.app
          SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
Time Machine:
          Skip System Files: NO
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 277.92 GB
          Destinations:
                    Backup [Local] (Last used)
                    Total size: 931.17 GB
                    Total number of backups: 85
                    Oldest backup: 2013-02-13 18:40:47 +0000
                    Last backup: 2013-12-31 17:59:26 +0000
                    Size of backup disk: Adequate
                              Backup size 931.17 GB > (Disk used 277.92 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              29%          Mail
               3%          WindowServer
               2%          mtmd
               1%          EtreCheck
               0%          NETGEARGenieDaemon
Top Processes by Memory:
          410 MB          mds_stores
          238 MB          Evernote
          229 MB          Mail
          147 MB          iBank
          123 MB          WindowServer
Virtual Memory Statistics:
          3.36 GB          Free RAM
          2.92 GB          Active RAM
          621 MB          Inactive RAM
          1.11 GB          Wired RAM
          1.67 GB          Page-ins
          0 B          Page-outs

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Here are scripts for getting OAS302 working on RedHat 6.0

People have said this doesn't work. It works. It's just the
owsctl that doesn't work. I'm not saying that oas302 on RedHat 6
is the best solution anyone could come up with, but it does work,
and if you want to do it, here are some scripts that you can feel
free to modify and use as you wish. Various variables should be
updated with however you system is configured. Remember to start
the wrb (i.e. the second script) before you start any listeners.
Linux has a tendency to crash if you don't kill -KILL all the wrb
processes at the same time (i.e. the kernel gets an uncaught
exception and dies).
Erik
<disclaimer>
I do not guarantee these will work. I do not guarantee that
they will not destroy something important. I assume no liability
for what these scripts may or may not do. Use them at your own
risk. There is no expressed or implied waranty.
</disclaimer>
#!/bin/ksh
# Script to start the oraweb http servers to listen for requests
# because owsctl is kind of unpredictable under RedHat 6.0
# set this variable to be the directory that the webserver
# configuration drivetoryies are under (i.e.
# /db/app/oracle/admin/ows/web/httpd_my.host.com)
WEB_HOME=/db/app/oracle/admin/ows/web/httpd_my.host.com
LISTENER="$2"
if [[ -z "$LISTENER" ]]
then
echo "No listener name to start."
echo "Usage: listen {start|stop} listener"
echo "e.g.:"
echo " listen start admin"
exit 1
fi
case "$1" in
start)
OMN_ADDR=UDP:worf.gcg.com:2649
OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
OWS_ORAWEB_FREEDOMX=1
export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FEEDOMX
CFG_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.cfg
if [[ -f "$CFG_FILE" ]]
then
oraweb -C $CFG_FILE
else
echo "Could not find config file for $LISTENER:"
echo " $CFG_FILE"
exit 1
fi
stop)
PID_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.pid
if [[ -f $PID_FILE ]]
then
kill `cat $PID_FILE`
if [[ $? -ne 0 ]]
then
echo "Could not stop oraweb $LISTENER process."
exit 1
fi
else
echo "Could not find oraweb $LISTENER PID file:"
echo " $PID_FILE"
exit 1
fi
echo "Usage: listen {start|stop} listener"
echo "e.g.:"
echo " listen start admin"
exit 1
esac
#!/bin/ksh
# Script to start up the Oracle Web Request Broker (wrb)
# processes manually because owsctl doesn't work on RedHat
# Linux 6.0
TMP_FILE=/tmp/wrb.pids
case "$1" in
start)
SLEEP=3
if [[ -f "$TMP_FILE" ]]
then
echo "$TMP_FILE exits. Make sure the wrb is not
already"
echo "running, remove $TMP_FILE, and run this script
again."
exit 1
fi
if [[ -z "$ORAWEB_HOME" ]]
then
echo "ORAWEB_HOME is not set. This environment variable"
echo "should be set to the directory where the oracle was"
echo "lives, i.e. /app/oracle/product/8.0.5/ows/3.0"
exit 1
fi
OMN_ADDR=UDP:my.host.com:2649
OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
OWS_ORAWEB_FEEDOMX=1 # I have no idea what this does; I read
# about it in a newsgroup. Supposedly
# it makes the oas run faster
export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FREEDOMX
PATH=$ORAWEB_HOME/bin:$PATH
mnaddrsrv -D &
echo -n "$! " > $TMP_FILE
sleep $SLEEP
mnrpcnmsrv &
echo -n "$! " >> $TMP_FILE
mnorbsrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbcfg &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrblog &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbasrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbahsrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbroker &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbvpm &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbfac &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbdm &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
stop)
kill -KILL `cat $TMP_FILE`
if [[ $? -ne 0 ]]
then
echo "Could not stop wrb processes. The PIDs are in"
echo "$TMP_FILE. If these are running, please"
echo "stop them manually."
else
rm -rf $TMP_FILE
fi
echo "Usage: wrb {start|stop}"
exit 1
esac
null

Hi Erick,
Your scripts for running the OAS302 on 6.0 linux had been very
helpful.
In fact, I dont know what would I have done without them.
Now I am able to run the listeners and even able to create the
packages and users in the database via the OAS 3.0.2 but the
problem starts when accessing a procedure in the database using
the pl/sql agent. By the way i am using Oracle 8.0.5.1 RDBMS and
its home is different than the webserver home.
The browser just does nothing and even does not log any error
message ,I have to stop it after a while but all my other
catridges are working.
any insight will be appreciated.
thanks,
Vikram ( Ironically enough I work for Oracle).
Erik Nielsen (guest) wrote:
: People have said this doesn't work. It works. It's just the
: owsctl that doesn't work. I'm not saying that oas302 on RedHat
6
: is the best solution anyone could come up with, but it does
work,
: and if you want to do it, here are some scripts that you can
feel
: free to modify and use as you wish. Various variables should
be
: updated with however you system is configured. Remember to
start
: the wrb (i.e. the second script) before you start any
listeners.
: Linux has a tendency to crash if you don't kill -KILL all the
wrb
: processes at the same time (i.e. the kernel gets an uncaught
: exception and dies).
: Erik
: <disclaimer>
: I do not guarantee these will work. I do not guarantee that
: they will not destroy something important. I assume no
liability
: for what these scripts may or may not do. Use them at your own
: risk. There is no expressed or implied waranty.
: </disclaimer>
: #!/bin/ksh
: # Script to start the oraweb http servers to listen for
requests
: # because owsctl is kind of unpredictable under RedHat 6.0
: # set this variable to be the directory that the webserver
: # configuration drivetoryies are under (i.e.
: # /db/app/oracle/admin/ows/web/httpd_my.host.com)
: WEB_HOME=/db/app/oracle/admin/ows/web/httpd_my.host.com
: LISTENER="$2"
: if [[ -z "$LISTENER" ]]
: then
: echo "No listener name to start."
: echo "Usage: listen {start|stop} listener"
: echo "e.g.:"
: echo " listen start admin"
: exit 1
: fi
: case "$1" in
: start)
: OMN_ADDR=UDP:worf.gcg.com:2649
: OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
: OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
: OWS_ORAWEB_FREEDOMX=1
: export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FEEDOMX
: CFG_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.cfg
: if [[ -f "$CFG_FILE" ]]
: then
: oraweb -C $CFG_FILE
: else
: echo "Could not find config file for $LISTENER:"
: echo " $CFG_FILE"
: exit 1
: fi
: stop)
: PID_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.pid
: if [[ -f $PID_FILE ]]
: then
: kill `cat $PID_FILE`
: if [[ $? -ne 0 ]]
: then
: echo "Could not stop oraweb $LISTENER process."
: exit 1
: fi
: else
: echo "Could not find oraweb $LISTENER PID file:"
: echo " $PID_FILE"
: exit 1
: fi
: echo "Usage: listen {start|stop} listener"
: echo "e.g.:"
: echo " listen start admin"
: exit 1
: esac
: #!/bin/ksh
: # Script to start up the Oracle Web Request Broker (wrb)
: # processes manually because owsctl doesn't work on RedHat
: # Linux 6.0
: TMP_FILE=/tmp/wrb.pids
: case "$1" in
: start)
: SLEEP=3
: if [[ -f "$TMP_FILE" ]]
: then
: echo "$TMP_FILE exits. Make sure the wrb is not
: already"
: echo "running, remove $TMP_FILE, and run this script
: again."
: exit 1
: fi
: if [[ -z "$ORAWEB_HOME" ]]
: then
: echo "ORAWEB_HOME is not set. This environment variable"
: echo "should be set to the directory where the oracle
was"
: echo "lives, i.e. /app/oracle/product/8.0.5/ows/3.0"
: exit 1
: fi
: OMN_ADDR=UDP:my.host.com:2649
: OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
: OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
: OWS_ORAWEB_FEEDOMX=1 # I have no idea what this does; I read
: # about it in a newsgroup. Supposedly
: # it makes the oas run faster
: export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FREEDOMX
: PATH=$ORAWEB_HOME/bin:$PATH
: mnaddrsrv -D &
: echo -n "$! " > $TMP_FILE
: sleep $SLEEP
: mnrpcnmsrv &
: echo -n "$! " >> $TMP_FILE
: mnorbsrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbcfg &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrblog &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbasrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbahsrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbroker &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbvpm &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbfac &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbdm &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: stop)
: kill -KILL `cat $TMP_FILE`
: if [[ $? -ne 0 ]]
: then
: echo "Could not stop wrb processes. The PIDs are in"
: echo "$TMP_FILE. If these are running, please"
: echo "stop them manually."
: else
: rm -rf $TMP_FILE
: fi
: echo "Usage: wrb {start|stop}"
: exit 1
: esac
null

What are some of the process chain errors one comes across?

hi friends
What are some of the process chain errors one comes across?

Hello Kiran,
Here are some of the errors that come across...
-> Rollup not possible, no filled aggregates available
-> Error when starting the extraction program
-> The process step locked by another changerun
-> Info objet does not contain alpha confirming values
-> Errors due to non activated objects
-> Errors due to duplicate records
-> Errors due to locking
-> Problems because of connection problem between source and bw systems
-> Problems due to RFC
Hope this helps you
Cheers
SRS

[svn:fx-trunk] 5367: The changes here are mostly fixing some sizing issues.

Revision: 5367
Author: [email protected]
Date: 2009-03-17 15:26:35 -0700 (Tue, 17 Mar 2009)
Log Message:
The changes here are mostly fixing some sizing issues.
For the FlashContainerPlaceholder, the first child is now MyFlexContentHolder, which extends mx.flash.FlexContentHolder but meets the invariant that it has 1 child and that child is FlexContentHolderThumbnail, which I?\226?\128?\153ve added as a swc to the project. I changed this by accident last time to refer to mx.flash.FlexContentHolder, when it should've referred to a concrete instance created by Flash from a swc. I also added a chrome of 151x151 to match the FlexContentHolderThumbnail since otherwise the container itself would have no chrome at all, and this let?\226?\128?\153s it size correctly.
Also, for sizing, in a container, rather than sizing to the size of the chrome, I now size to the size of the FlexContentHolder thumbnail that all FlexContentHolder?\226?\128?\153s have. This means in ContainerMovieClip, I don?\226?\128?\153t need to override bounds anymore.
ContainerMovieClip now implements IVisualElementContainer.
Also, I fixed a resizing event bug in UIMovieClip where the resize event was getting dispatched more than once.
QE Notes: -
Doc Notes: -
Bugs: SDK-19271, SDK-19788, SDK-19789
Reviewer: Glenn
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19271
http://bugs.adobe.com/jira/browse/SDK-19788
http://bugs.adobe.com/jira/browse/SDK-19789
Modified Paths:
flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/ContainerMovieClip.as
flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/FlexContentHolder.as
flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/UIMovieClip.as
flex/sdk/trunk/frameworks/projects/utilities/build.xml
flex/sdk/trunk/frameworks/projects/utilities/src/FlashComponentPlaceholder.as
flex/sdk/trunk/frameworks/projects/utilities/src/FlashContainerPlaceholder.as
Added Paths:
flex/sdk/trunk/frameworks/projects/utilities/libs/
flex/sdk/trunk/frameworks/projects/utilities/libs/FlexContentHolderThumbnail.swc
flex/sdk/trunk/frameworks/projects/utilities/src/MyFlexContentHolder.as

Hello Everyone,
We request you all to try your applications with http://labs.adobe.com/technologies/flashplatformruntimes/air3-5/
Release Notes - http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/shared/air3-5_flashplayer11-5 _releasenotes.pdf
Please let us know how it goes.
-Thanks
Pahup

HT4007 I Just updated Apeture to 3.3.2 Now there are some photos that I receive a message..."Unsupported Image Format" Are there lost? can I retrieve them? can I change the format? Help...?!?

I just updates Apeture to version 3.3.2 after installing Mountain Lion. There are some photos in Apeture that now say, "Umsupported Image Format". Are these lost? Can I retrieve them...how? Can I change the format so that I can see them again? Help?!?

Are these images "Raw" images? What is the make of your camera?
Check the version of the Digital Camera RAW Compatibility Update that is installed. The version of the raw support is shown in the About panel: from the main menu bar:
Aperture > About Aperture
Download the latest Raw Update from here:
Digital Camera RAW Compatibility Update 3.14
If you have the latest raw support installed, but Aperture does not recognize the format, try to register the raw support for your camera with the launch services db, see this post by Alan Roseman:
Re: Aperture 3 preview of raw file greenish
But also read the following post, that explain how this is supposed to work and to correct the typo in the command
In short: Quit Aperture, open the terminal, paste the follwing text in (all in one single line) and hit return; then reboot the system.
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -R /System/Library/CoreServices/CoreTypes.bundle/Contents/Library
Regards
Leonie

I want to change my account in the AppStore from USA to Saudi , but there are some cents 0.04 $ prevent change to Saudi and I do not need these cents So what is the solution ?

I want to change my account in the AppStore from USA to Saudi , but there are some cents 0.04 $ prevent change to Saudi and I do not need these cents So what is the solution ?

Click here and request assistance.
(88185)

[svn] 4255: GraphicElements are no longer supported in DataGroup.

Revision: 4255
Author: [email protected]
Date: 2008-12-08 15:32:25 -0800 (Mon, 08 Dec 2008)
Log Message:
GraphicElements are no longer supported in DataGroup. This allowed us to clean up a lot of the code (hurray!)
Moreover, there are some other cleanups. We now support null items. Item renderers are strongly typed as IVisualElements now (an item renderer must be an IVisualElement and a DisplayObject). We also don't dispatch events when changing the itemRenderer or itemRendererFunction anymore as there's no need to do it and no need to make these properties bindable.
Also a minor fix in FlexNativeMenu where the binding metadata was using the wrong event.
QE Notes: Steve's already changed mustella tests for me.
Doc Notes: None
Bugs: SDK-18040, SDK-18046, SDK-18045
Reviewer: Glenn
tests: checkintests, mustella DataGroup, FxDataContainer, FxList, Group
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18040
http://bugs.adobe.com/jira/browse/SDK-18046
http://bugs.adobe.com/jira/browse/SDK-18045
Modified Paths:
flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FlexNativeMenu.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/DataGroup.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxButtonBar.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxList.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/Group.as

jasonwryan wrote:
theking2 wrote:
tomegun wrote:All our packages now have service files, so everyone should be able to migrate away from rc.conf. New users should never create/need it.
Does "All our packages" also include the AUR packages?
No: they are not Arch packages.
theking2 wrote: The one I specifically am worried about is the LogitechMediaServer AUR, and the miniDLA. Is there a way to find out if they will run with systemd and if not what to do?
You can just read the PKGBUILD rather than expecting others to do it for you...
I can read fairly well, (with my reading glasses, admitted) what particularly do I have to (not) worry about?
p.s. I did write my own PKGBUILDs in the past that work passably well
Last edited by theking2 (2012-12-06 01:18:48)

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT4208 Just gave my old ipad to Mother N Law. How do I get her up to speed? I heard there are some classes she can take. How do I make a reservation?

Just gave my old ipad to Mother N Law. How do I get her up to speed? I heard there are some classes she can take. How do I make a reservation?

They have Discover your iPad workshops at the Apple Store. Is there one near her?

[svn] 3410: Here are some changes to DataGroup.

Similar Messages

Maybe you are looking for