Switch from AppleTalk to IP Address not working well in Quark 7.5

Knowing I have to switch from AppleTalk to IP Address printing with two new MACs coming online with Snow Leopard, and updates I plan to do to three MacPros, I started testing by turning off AppleTalk on a MacPro running Leopard. I then set up our two printers (HP Color LaserJet 8500 and HP Laserjet 2200) through their IP addresses. Everything prints fine to the 8500, but have a problem with the 2200.
We have routinely printed color documents out of Quark 7.5 to the 2200 for initial proofing, to save the cost of color printing. While some graphics don't look particularly great, they have printed OK (for initial proofing). However, when printing through the IP address to this printer, Quark documents with graphics become nothing more than junk, and print page after page of nothing but a row or two of junk. I've tested this on two MacPros prior to any update to Snow Leopard, with the same result.
What could be causing this? Everything works fine through AppleTalk, but not through IP address on the one printer. (I'm totally disgusted that Apple did away with AppleTalk in Snow Leopard!!!)
Thanks,
Ginny

https://tools.cisco.com/bugsearch/bug/CSCtf71671/
you need AAA assignment, or at least you needed to have it a couple of years back.

Similar Messages

I downloaded today 09.19.2013 iOS 7 on my iphone 4 and iPad retina. Unfortunately on the camera app the switch from photo to video does not work neither on iphone nor on ipad. Is it a "youth" bug ?

I downloaded ios 7 today 09.19.2013 on my iphone 4 and ipad retina 3hrd generation 64g . The switch from photo to video on the camera app does not work neither on iphone nor on ipad. Is it a "youth"bug ?

Did you try swipe up and down to change?

Switching from HDD to SSD - CCC not working to clone my existing drive

I have a mid-2011 Macbook Pro 15" and I'm trying to replace the internal HDD with a new Crucial M500 SSD (500gb and 480gb, respectively). I've been researching but this problem is persisting.
Here is what I have ready to assemble:
Macbook Pro 15" mid-2011500GB HDD @7200 (330GB used)
Crucial M500 SSD 480 GB
WD External 500GB to use as a backup
Vantec NexStar TX 2.5-Inch SATA to USB 2.0 External Hard Drive Enclosure
I'm using Carbon Copy Cloner to try to clone my laptop's internal drive to my external for backup. With the first attempt, the process stopped around 90GB saying there was an error because the destination drive ran out of space. I completely wiped the external drive a second time, started the CCC, and again it stopped right around 90-100GB. I have saved many time machine backups of 300+ GBs to the same external drive with no problems, but apparently time machine doesn't work when replacing a new drive. What's going on here?
I understand there are many threads and articles out there, I've read plenty of them, but I hope you all can help me based on my hardware and circumstances. Thanks

You must partition and format the SSD:
Drive Partition and Format
1. Boot from your external drive. Open Disk Utility.
2. After DU loads select your SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When the above is completed quit Disk Utility. Open CCC and clone your external drive to the internal SSD. Be sure you also install a Recovery HD at the beginning. CCC should alert you before cloning. Of course you external drive should have a Recovery HD partition. If it does not then CCC should be able to install one from their archive.

Dynamic link from Premier to AE CS6 not working well

Just downloaded CS6 2 days ago and today I tried converting a HDV video sequence with two titles on tracks 2 & 3 into an After Effects comp.
So AE launched and all copied over but my two titles came over as black solids! So I deleted them then I right clicked on the 1440x1080 HDV video layer in the HDV comp and choose Track Camera, it spent some time anlayzing the video and then said "Layer size must match Composition"
So seems to be some bugs in the whole dynamic link transfer system between premier pro and AE in CS6 ???

Dynamic Link is designed to bring over footage items, but titles are created dynamically inside Premiere and do not exist as footage first. As a result, I am not surprised they do not come into AE through the dynamic link.
The best workflow is to start with the superior text manipulation inside After Effects. You can get much more control and power from within AE. If you aren't sure how to start working on text there, there are many, many excellent free tutorials at CreativeCow.net or paid instructional videos with Lynda.com or Video2Brain.com.
Otherwise, do not bring the titles into AE - make any adjustments you want to make to your footage, and keep the titles separate.

HT5622 my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario

The ring switch and the volume botton do not work what is theproblem ?

The ring switch and the volume bottons do not work, what is the reason?

When you say they don't work, what are you trying to do? When you say the ring switch, I'm assuming you are referring to the mute switch that turns the ringer off/on? What troubleshooting have you tried?
The standard troubleshooting procedures for the iPhone are:
Power off/on
Reset
Restore, first from backup, then as a new phone.
IF that doesn't help, then you make an appointment at the nearest Apple Genius Bar and have them see if there is a hardware issue.

HT5312 Rescue email address not work and I forget my security question answers

Rescue email address not work and I forget my security question answers

If you don't have access to your rescue email account (you won't be able to change it until you can answer 2 of your questions), or you aren't receiving the email to it, then you will need to contact iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down the page that you posted from to update your rescue email address for potential future use, or you could change to 2-step verification : http://support.apple.com/kb/HT5570

BIP report security from Dashboard to Publisher is not working

Hi ,
I created a BIP report(.xdo) and placed it on Dashboard as a link . As admin , I can see the report . As a user , I am able to get into publisher but not able to see the report . Iam getting the below error message .
Error : Unauthorized Access: please contact the administrator.
I suspect that security model from Dashboard through BIP is not working . I tried searching the online resources but couldnt find right help .
Iam a newbie for BIP , I followed the regular BIP guides , configured eveything as per the docs and things work as admin . But I want to test the security as user .
Where Iam doing wrong , Any ideas please help .
Thanks
Karthik

Hello Vijay ,
I have grant permissions to the user and the report in BI webcatalog and also in BIP under admin tab I have addes the role which the user belongs to and also the shared folder . Still the problem exists.
My BI presentation servcies security is working . My user security is also working , all that I need is the user should be able to see the report when he clicks on BIP link placed in dashboard.

At random times firefox loads an unrequested page. Sometimes it is the Google search page but more often it is a random page which sometimes loads or stays blank. I do not recognise them as sites from my directory. Otherwise Firefox works well. Any su

At random times firefox loads an unrequested page. Sometimes it is the Google search page but more often it is a random page which sometimes loads or stays blank. I do not recognise them as sites from my directory. Otherwise Firefox works well. Any suggestion for a cure?
== This happened ==
A few times a week
== one month ago

Glad to see its working.
To help other users find solutions, click on the '''"Solved It"''' button Next to the Reply that BEST solved your Question
Please DO NOT click "Solved It" next to this reply

Why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

Here is a copy of my expressions and a copy of my data. The expressions match up going from left to right
Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4"))
sum(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
count(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
PUBLIC SHARED FUNCTION CalcPTD2(LookupArray AS OBJECT) AS INTEGER
     DIM i,Total AS INTEGER
     Total = 0
     FOR i = 0 to UBOUND(LookupArray)
           Total = Total + CINT(LookupArray(i))
     NEXT i
NumberTimes =   NumberTimes +1
RETURN Total
END FUNCTION

Update to 10.6.8 and HP F2100 and D2400 Printers stopped working. Restored 10.6.7 and printers from Install CD's but not working, Same with scanner

Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
Steve

None of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers.

My Itunes account was hacked and my Apple ID was disabled. I followed the instructions from APPLE to backup and restore from Itunes but that did not work. Any suggestions?? Thanks!!

My Itunes account was hacked and my Apple ID was disabled. I followed the instructions from APPLE to backup and restore from Itunes but that did not work. Any suggestions?? Thanks!!

Are you saying that you contacted Apple support and they instructed you to backup and restore your iPad? Or do you mean that you picked up this information from an online support article? If you spoke to an Apple rep or received these instructions via email, contact them again for further help.
I fail to see how restoring your iPad would enable yoyr Apple ID.

My macbook is back from repairs. It is not working with my apple led cinema display. It was working prior to the repairs on the laptop. Is there a setting I don't know about that might have been changed?

My macbook pro is just back from repairs. It is not working with my apple led cinema display. I have followed the directions in the cinema display manual. am I missing something?

Take a look at the Displays preference panel to see if everything is ok, particularly the resolution and refresh rate. Displays will probably try to put the panel for the ACD on the ACD where you won't see it. So click "Gather Windows" to get the ACD panel on to your macbook.
One more thing, make sure you fully seated the mini displayport plug. They can be sneaky little devils in that they need to be fully pushed in.

ITunes drag to import new songs in library or to create playlists from folders on windows does not work!

iTunes drag to import new songs in library or to create playlists from folders on windows does not work!
WHY? I have to solve, how can I do? Thank you

up

I'm not a "Cloud" member. I just upgraded to Lightroom 6 from Lightroom 5. All was working well yesterday. Today Lightroom will not open (Windows 7). I see the logo photo over my Lightroom platform but nothing loads and I see "Lightroom not responding

I'm not a "Cloud" member. I just upgraded to Lightroom 6 from Lightroom 5. All was working well yesterday. Today Lightroom will not open (Windows 7). I see the logo photo over my Lightroom platform but nothing loads and I see "Lightroom not responding." I checked the catalogs and see that lrcat-Journal and lrcat-Lock have been created every time I try to open. I have a backup from the first day I upgraded, but Lightroom doesn't want to access it. Should I reinstall?

Well, is the catalogue (and the folder it is in) writable? Have you actually checked the permissions? Lightroom won't be spitting out the error just to tick you off, and - computer wizard or not - this sounds very much like something you'll have to fix at the OS level: it's probably nothing to do with Lightroom or those funny lads at Adobe.
Some light reading for you, courtesy of the site search: https://forums.adobe.com/search.jspa?q=%22+not+writable+and+cannot+be+opened%22&place=%2Fp laces%2F1383621&depth=ALL
It would help to know your OS.

Switch from AppleTalk to IP Address not working well in Quark 7.5

Similar Messages

Maybe you are looking for