"Syntax error loading filters - operation cancelled"

Hi all,
Version 9.2.0.2
I am experiencing an error that has been documented before. When I logged into an application, I get this popup "Syntax error loading filters - operation cancelled" from the Excel add in which won't let me log in. I tried all most of the reccomendations (restarting application/server) with the exception of changing ports.
My application doesn't have filters. I think it might be something to do with an unable ip address or something. Any ideas?
Thanks

Is the IP address of the server configured as static or dynamic? I used to get this error all the time on my laptop when I returned from 'suspend' mode. If I put in a static IP address, the problem would go away.
Tim Tow
Applied OLAP, Inc

Similar Messages

Analytic Services: Syntax error loading filters

Hi, I use Hyperion Essbase 7.1.0 on Windows Intel. I constantly getting error message when building cubes. ============== error message ============= [Mon Jul 16 05:16:21 2007]localhost///biadmin/Error(1054013) Syntax error loading filters - operation canceled ========================================== Interesting is that error is not accuring every time I build the cube. For example at night when script is executed by scheduler it reports error, but at the morning when I manualy execute script it executes without any error. I have figured out that this error is only happening at ASO cubes. Any help is greatly appreciated. Can someone point me to the error messages book. What should I do to overcome this errors? Thanks, Grofaty

Here is a case on Hyperion's esupport relating to the error message. We cycle all our Hyperion services nightly before we begin our nightly runs. Hope this helps. I love the "cough" reasoning! Solution ID: hyp71264 Here is the solution: Error: "1054013 Syntax Error loading Filters" There are a few possibilities for this message: An invalid filter applied. Verify that all filters are correct There was some sort of network "cough" where the client loses connection with the server. This is so short that the enduser probably did not even notice it, though Essbase has. Stopping and starting the Essbase server usually resolves this error You may also see this after an abnormal termination of an application Here is the problem or goal: Error: "1054013 Syntax Error loading Filters" Error connecting to Essbase server

Syntax error loading filter

Hi,by opening an application (excel spreadsheet)or saving the outline - I got this error message.could please somebody help me!!!thanx a lot

Are there any filters defined in this application?Do they all validate and contain valid member names?I have only ever seen this error message when there has been a syntax error in a filter.I have to admit to being a little puzzled by the message appearing when saving the outline. Is it only this one app where you get the message?Can you check that the supervisor isn't also a member of a group with security assigned to it.

Syntax error in join operation

Hi ,
I am getting an syntax error for the following sql statement. i am trying to join data from 2 excel sheets to paste data in 3rd sheet.
strSQL = "SELECT data.*, franchise.* FROM [franchise$] " & _
"INNER JOIN [data$] ON franchise.Location = data.TalukaName " & _
"WHERE data.TalukaName='Thane (East)'"
i have also provided the entire code for refernece. please help. i wasted lot of time to figure out the error.
Sub trial()
Dim cn As ADODB.Connection
Dim rs1 As ADODB.Recordset
Dim rs2 As ADODB.Recordset
strFile = ThisWorkbook.FullName
strCon = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" & strFile _
& ";Extended Properties=""Excel 12.0;HDR=Yes;IMEX=1"";"
strSQL = "SELECT DISTINCT [talukaname] FROM [data$]"
Set cn = CreateObject("ADODB.Connection")
Set rs1 = CreateObject("ADODB.Recordset")
cn.Open strCon
rs1.Open strSQL, cn
While Not rs1.EOF
strSQL = "SELECT data.*, franchise.* FROM [franchise$] " & _
"INNER JOIN [data$] ON franchise.Location = data.TalukaName " & _
"WHERE data.TalukaName='Thane (East)'"
Set rs2 = CreateObject("ADODB.Recordset")
rs2.Open strSQL, cn
Worksheets("result").Range("a2").Select
While Not rs2.EOF
ActiveCell.Value = rs.Fields("Name")
ActiveCell.Offset(0, 1).Value = rs.Fields("talukaname")
ActiveCell.Offset(0, 2).Value = rs.Fields("clickscount")
ActiveCell.Offset(0, 3).Value = rs.Fields("fbcount")
ActiveCell.Offset(0, 4).Value = rs.Fields("clicksamount")
ActiveCell.Offset(0, 5).Value = rs.Fields("fbamount")
ActiveCell.Offset(0, 6).Value = rs.Fields("totalmount")
ActiveCell.Offset(0, 7).Value = rs.Fields("email address")
ActiveCell.Offset(0, 8).Value = rs.Fields("location")
ActiveCell.Offset(1, 0).Select
Wend
rs2.Close
Set rs2 = Nothing
rs1.MoveNext
Wend
rs1.Close
cn.Close
Set rs1 = Nothing
Set cn = Nothing
End Sub

Hi naswiz,
This is the error message you got, right?
You should use alias for the worksheet or the worksheet's full name. For example, it works fine if you change the SQL string like this:
strSQL = "SELECT d.*, f.* FROM [franchise$] as f " & _
"INNER JOIN [data$] as d ON f.Location = d.TalukaName " & _
"WHERE d.TalukaName='Thane (East)'"
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there a way for AutoVue viewer (JVue/VueBean object) to cancel long lasting loading/rendering operation?

Is there a way for AutoVue viewer (JVue/VueBean object) to cancel long lasting loading/rendering operation? In our integration when we try to switch from a document being loading on another one we can get an error message “Cannot load page” (but the document is shown after that). Or if we try to stop loading document by calling jVue.closeDocument() we can see everlasting progress bar and indicator “Loading…” on the status bar.

No, it is not possible

Error: Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.

Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!

I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction?

Error loading file in the operation long text in the General task list

Hi all,
I couldnt upload the detailed check lists in the operations (operation tab) of the general task lists through the long text uplaod via Text->Upload->RTF---> .System is throwing the following Information...
1.Error loading file " specified path with filename.rtf"
Could you please give me any idea to eliminate this.The client is having the detailed check list for each and every operation with safety measures to be taken.
Plz help.
Regards,
Suresh.

Hi all,
It was an authorisation object missing and the problem got solved.
Regards,
Suresh.

Hierarchy load - Error RSAR 683 Syntax error in generated program, row 0

Hi guys,
When I load the hierarchy on ZMATERIAL (load from 0MATERIAL hierarchy - source system BW), I have this error message : RSAR 683 Syntax error in generated program, row 0.
I have found several SAP notes, especially [Sap Note 944842|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler], but the implementation on our system does not change anything.
We are working on BW3.5 SP12.
Can anyone could tell me what to do ?
Will this issue be solved once we upgrade until SP18 as it is mentionned in the SAPNote ?
Thanks,
Alexandra
Edited by: Alexandra Guillaux on Apr 1, 2009 4:36 PM

Hello Alex,
after implementing the corrrection part of note 944842 via SNOTE, plaese also:
1. replicate datasource
2. activate transfer structure (report RS_TRANSTRU_ACTIVATE_ALL)
3. activate infoobject (make dummy change to description
of infoobject etc, save and activate it, remove change and save and
activate it again).
Hope it could resolve the incident.
Thank you & Best regards,
Vince

Error loading operating system- windows xp/windows me

Hi,
So, I have a Hp Pavillion 9715 desktop with windows xp professional and basically yesterday I turned on my computer and all it would do would go to the black screen saying "error loading operating system"
Now I'm not really sure what tp do I was going to reinstall window xp, but i dont how to do this as i don't have the cd and the computer wont even power up in safe mode. I then realised that my computer's operating system is windows millenium edition, which i havs the recovery cd for. i could use this, but id lose all my data. i was wondering if there was a way to save or transfer all my files to a different hard drive. Or if there was a way to use the recovery cd to repair everything without me losing all my personal files, or would this not work because it would be windows me that is reinstalled and not xp?
If anyone at all could help me id be so grateful, its quite annoying/upsetting. Thanks

Welcome to the HP Forum!
nickiblahblah wrote:
Hi,
So, I have a Hp Pavillion 9715 desktop with windows xp professional and basically yesterday I turned on my computer and all it would do would go to the black screen saying "error loading operating system"
Now I'm not really sure what tp do I was going to reinstall window xp, but i dont how to do this as i don't have the cd and the computer wont even power up in safe mode. I then realised that my computer's operating system is windows millenium edition, which i havs the recovery cd for. i could use this, but id lose all my data. i was wondering if there was a way to save or transfer all my files to a different hard drive. Or if there was a way to use the recovery cd to repair everything without me losing all my personal files, or would this not work because it would be windows me that is reinstalled and not xp?
If anyone at all could help me id be so grateful, its quite annoying/upsetting. Thanks
Wow! Your PC is almost as old as my (1996) Compaq 14XL244 Notebook.
It still works, but required hard disk replacement about six years ago. I suspect you will have a very hard time getting any files from your IDE hard disk. You can try putting the hard disk in an external enclosure and connecting it via USB to another PC.
The error message that you are seeing means that the BIOS can no longer recognize the hard dive.
It is probably time to consider updating to a more recent PC. You certainly got plenty of good service life from it.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

SQL*Loader-350: Syntax error at line 5.

Hi ,iam new for using sql*loader, with minimum understanding from the forums,Iam trying to load data from a flat file (.dat) to oracle database.
here is my .dat file-------> data_file.dat
aaaa, mumbai
bbbb,kolkat
here is my .ctl fle ------->ctrl_file.ctl
load data
infile 'F:\oracle_utils_kiranorcl\KIR_ORA_DIR\emp_data.dat'
into table test
fields terminated by ","
( NAM varchar2(12),
PLACE varchar2(8)
here is db_tab_name structure
create table test (nam Varchar2(15),place Varchar2(10));
SQL> select * from test;
NAM PLACE
now.......
iam running the command on cmd window on os level
F:\app\NANDAN\product\11.2.0\dbhome_1>sqlldr userid=kiranmai/kiranmai@kiranorcl control=F:\oracle_utils_kiranorcl\KIR_ORA_DIR\emp_data.ctl log=F:\oracle_utils_kiranorcl\KIR_ORA_DIR\emp_data.log bad=F:\oracle_utils_kiranorcl\KIR_ORA_DIR\emp_data.bad
when i run this above command ,I get an error,
SQL*Loader-350: Syntax error at line 5.
Expecting "," or ")", found "varchar2".
( NAM varchar2(12),
^
I tried so many times by creating new ctl files further. But couldn't able get what is the wrong thing ????
Please help me ..
Thanks

Instead of:
fields terminated by ","
( NAM varchar2(12),
PLACE varchar2(8)
try:
fields terminated by ","
( NAM char,
PLACE char

"java ODBC Microsoft Access Driver Syntax error (missing operator) in query

Hi I am new to java and I am getting this error message when using java to access and insert data into an MS Access database.
"java ODBC Microsoft Access Driver Syntax error (missing operator) in query expression"
The commands are
String insertCommand = "INSERT into MetricOutput(A1,A,DRR,DeRR,RE,WDRR,WDeRR,WRE,ARF,SRF,HRF,WARF,WSRF,WHRF,SDC,WSDC,MAR,WMAR,H1,H11,H2,H21,cluster) "+
"VALUES("+comMappedCount+","+stdCount+","+DRR+","+DeRR+","+RE+","+WDRR+","+WDeRR+","+WRE+","+ARF+","+SRF+","+HRF+","+WARF+","+WSRF+","+WHRF+","+SDC+","+WSDC+","+MAR+","+WMAR+","+H1+","+H11+","+H2+","+H21+",+array)";

"VALUES("+comMappedCount+","+stdCount+","+DRR+","+DeRR+","+RE+","+WDRR+","+WDeRR+","+WRE+","+ARF+","+SRF+","+HRF+","+WARF+","+WSRF+","+WHRF+","+SDC+","+WSDC+","+MAR+","+WMAR+","+H1+","+H11+","+H2+","+H21+",+array)";After looking at your post in the editor, I see what your real query looks like. You realize that ",+array[i])" is part of the query, right? And not actually looking at your Java array?

[ODBC Microsoft Access Driver] Syntax error (missing operator)

Aello' - as you can see in my database table their are two
records to delete based on the HISTORY_ID of 1. This was working
just fine when I was using a MS SQL Server database but when I
switched to the MS Access database I get this error now.
Is their a syntax difference?

mikeap wrote:
> Attached code. Clearly their are records to delete, what
am I missing?
>
> Using MS Access database.
>
> [Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft
> Access Driver] Syntax error (missing operator) in query
expression
> 'R_PROJECT_MEDIA WHERE Media_ID IN (1)'.
>
> <cfquery datasource="tbar">
> DELETE R_HISTORY_MEDIA
> WHERE History_ID IN (#FORM.pHistory#)
> </cfquery>
DELETE
FROM R_HISTORY_MEDIA
WHERE History_ID IN (#FORM.pHistory#)
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

Syntax error (missing operator) in query expression works in sql

Hi guys,
I am having a problem with this query in Access 2007, it runs
fine in MSSQL.
I get this error when I run it.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error
(missing operator) in query expression
'tbl_skuoption_rel.optn_rel_Option_ID = tbl_skuoptions.option_ID
INNER JOIN tbl_skus ON tbl_skuoption_rel.optn_rel_SKU_ID =
tbl_skus.SKU_ID INNER JOIN tbl_products AS p ON
tbl_skus.SKU_ProductID = p.product_ID'.

Access may require parenthesis ( ) around the JOINs when
joining more than two tables

Issue sourcing from Microsoft Access - Syntax error (missing operator)

I apologize if this has been discussed before. I used the search and went through 7 pages of results, but didn't see a similar issue.
I'm using Windows 7, ODI 11.1.1.5.
I'm trying to source from a local MS Access DB to an Oracle DB.
The session fails pretty much immediately (on step 3) - trying to pull data from the source table.
"Syntax error (missing operator) in query expression"
The source table is very simple and for this test I'm using no joins. Literally a 'select * from'.
However - when I look at the SQL generated - it's wrong. It's got duplicate lines in the SQL and not all columns selected have a comma after and before the next column.
If I run it direct on Access - I get the same error.
If I clean up the SQL - it'll run fine on Access.
I'm using the SQL to Oracle LKM.
I wondered if it was something with the ODBC driver - so I've tried other versions of ODBC drivers for MS Access, and even switched the database itself from the Office 2007 format, back to 2003, and tried a driver for that.
Same result.
If I go to the model and right click and look for the data in the table - it displays fine. So obviously ODI can connect and see the data...
So I guess my questions are:
- is the SQL to Oracle LKM the correct one to source from Access ? I've even gone into it and specified MS Access as the source. Same result.
- if it is the right one - what's going on ?? I've got to assume other people are pulling data from MS Access. Why the garbage SQL ? Clearly I'm missing something.
- and finally - worst case - but is there a way for me to overwrite the SQL being generated so I can correct it myself. This will be a PITA since I'll be source from a bunch of tables - but at least it might be a temporary stop gap...
thanks

I'm going to mark this as closed for now. I solved the SQL issue. It was to do with the way the tables / fields were named and how the fields were being brought into the workflow. Tidying up there fixed the problem.
Getting past that brought me to several other issues which I'm still working through. The current is an Invalid Fetch size error - but that appears to have been resolved in patch Doc ID: 13528165 in ODI 11g (ver 11.1.1.5.0)
given the initial issue that I'd raised is no longer a concern - I'm closing.
Edited by: 940843 on Jun 15, 2012 1:27 PM

Syntax error (missing operator) in query expression

Hi all
I am creating a couple of pages where a dynamic list is created from an access database and then products from that list are displayed, the user then has the option of clicking more details, this then should pass the KITID over to the details page, However when i click on the details page i get the following error
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'KitID = Kit 01'.
/classicclocks/Kieninger_gallery.asp, line 21
Here is the code from the page i am building, can anybody see anything obvious here
strKitID = Request.QueryString("KitID")
' If KitID does not exist then redirect to Gallery page
If strKitID = False Then
Response.Redirect("kit_gallerytest.asp")
End If
' SQL Query for specific KitID details only
Dim objRS
Set objRS = Server.CreateObject ("ADODB.Recordset")
' Open new objRS
strSQL = "SELECT KitID,ImgKitCatalogue,KitDescriptionShort FROM tblMovements WHERE KitID = " & strKitID & " ORDER BY KitID"
objRS.Open strSQL, MM_dbConn_STRING,,,adCmdTable
' Get all rows from table and asign values to array for use in form
Do While Not(objRS.EOF)
Images = True
fsImagesArray = objRS.GetRows()
    Const arrKitID = 0
    Const arrImgKitCatalogue = 1
    Const arrKitDescriptionShort = 2
Loop
' Close objConn and objRS
objRS.Close
strSQL = "SELECT * From tblMovements WHERE KitID = " & strKitID
objRS.Open strSQL, MM_dbConn_STRING
thanks
John

String values in a SQL where clause must be wrapped in quotes. Try this:
strSQL = "SELECT KitID,ImgKitCatalogue,KitDescriptionShort FROM tblMovements WHERE KitID = '" & strKitID & "' ORDER BY KitID"

"Syntax error loading filters - operation cancelled"

Similar Messages

Maybe you are looking for