Syntax to use -attr switch in the cli.
Hi,
does anybody know the syntax to use multiple attributes after the -attr switch in the cli command?
Thanks
Karsten
Ok i tried but get following error when to try to create a new vir host.
i use following command:
cr_cli -cmd hdb.h.add -u username -p password -name abctesthost-vir -tID 085205246241-1165495440527-10321-1002116352 -attr "RA_HOSTNAME=abctest;RA_PROVISIONING_IP_ADDR=192.168.20.20;RA_OWNER_DIR=/var/crash/home/n1sps;RA_REMOTE_PRIV_USER=gspidmgr;RA_REMOTE_PRIV_USER_HOME=/export/home/gspidmgr;RA_SRC_SSH_DIR=/opt/SP/SUNWn1sps/home/n1sps/.ssh; RA_DST_SSH_DIR=/var/crash/home/n1sps/.ssh;RA_INSTALLBASE=/opt/SP/SUNWn1sps; RA_CTYPE_PARAM=cprefix=/opt/SP/SUNWn1sps/N1_Service_Provisioning_System/agent;RA_INSTALL_JRE=/opt/SP/SUNWn1sps/N1_Service_Provisioning_System/common/jre;RA_PARENT_OWNER_DIR=/opt/SP/SUNWn1sps/home/n1sps;RA_PACKAGE_PATH=/var/tmp/spsra;RA_PACKAGE_NAME=ccr_ra_solaris_sparc_5.2.sh;RA_REMOTE_PRIV_CMD=/usr/local/bin/sudo" -pID 010010001024-0000000000000-00001-0000000005
and get the following error:
Error with request - response layer when sending request / receiving response. (022059) com.raplix.rolloutexpress.systemmodel.hostdbx.Host; local class incompatible: stream classdesc serialVersionUID = 4240878173905530638, local class serialVersionUID = -1544620923116491043
Any idear?
Karsten
Similar Messages
-
How to set a digital output using a switch on the operator interface?
Hi, is it possible to set a digital output using a switch on the operator interface?
Thanks,
MikeUnfortunately, no. It is on our hit list...
This account is no longer active. Contact ShadesOfGray for current posts and information. -
Why can't I use a backspace or the refresh button anymore? I Did't ask for that option to be removed
I always use the backspace, please let me have it again
Hello phil1978, '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I'm currently using Google reader for my feeds but Google is discontinuing it in July. So I need a new feed reader option. I am trying to set up the Brief add-on as my reader, using Live Bookmarks but when I attempt to subscribe to a feed, the subscribe button doesn't work.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
After using firefox to set the desktop wallpaper i cannot change the wallpapre without using firefox
i cannot change my desktop wallpaper unless i am online using firefox
Open a image in windows 7 and right click choose set as wallpaper.
if you think its firefox problem, try in safemode. and try the above line
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
How do I know which commands have been pushed to switch by PI CLI template
We have PI version 1.3. I tried to deploy the built-in CLI template "vlan" just to create a vlan. I run the template and input vlan ID and name. The job is shown as successful in PI but the vlan is not created on the switch. In the transcript part of the job history, it only shows "configlet:response: config t". Please see the attachment for the screen shot. How do I know which commands have been pushed to the switch by the CLI template? How does PI push the CLI template to the switch? via snmp or telnet? I tried to run "debug tacacs authentication" and "debug tacacs accounting" on the switch because the switch is configured for command authentication and command accounting but I don't see any commands in the debug. It looks PI did not push any commands to the switch. Please help me to troubleshoot this.
Thanks.The MPEG 2 Playback Component required by Streamclip is an optional purchase.
http://store.apple.com/us/product/D2187Z/A
There are other converters that can handle MPEG-2 files; try Handbrake.
Regards. -
non riesco a ricevere acquisti fatti su itunes, mi da questo errore :erreu : you have an error in your sql syntax; checkthe manual that corresponds to your mysql server version for the right syntax to use near from news order by id desc at line. cosa devo fare? grazie
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Upgrading AsyncOS using the CLI
So I found the IronPort page where it instructs you how to upgrade using the CLI, here are the steps:
As a best practice, IronPort recommends preparing for an upgrade by taking the following steps:
1. Save the XML configuration file off of the appliance.
2. If you are using the Safelist/Blocklist feature, export the list off of box.
3. Suspend the listeners.
4. Drain the mail queue and the delivery queue.
5. Re-enable the listeners after you upgrade.
Only problem is I don't know the syntax for steps 3-5. I have 2 C350's. So I assuming I suspend the listeners on one, drain the que's - so the other one will start getting all the mail. Then once it's back up and I re-enable, both will start getting mail again, then I in turn do the same process on the other C350.
I also have a M650 - should I upgrade the M-series first, or the 2 C-series to the newest build first? I'm running 6.3.5-003, I am planning to go to the latest build on all 3 appliances (6.5.0-405).
Any help would be appreciated. I noticed you could upgrade through the GUI also, but seems like that is frowned upon. Why? I just want to click the big "Upgrade" button! haha
Thanks!Hi TFisher,
I'm always using the CLI for my upgrades; it gives you more insight in what's happening.
The CLI commands for your steps 3 and 5 are "suspend listener" (step 3) and "resume all" (step 5)
You can also do a "suspend all" but that also suspends mail delivery, making in impossible to drain the system. This is possibly not a problem, normally are the mails that can not be delivered to internet hosts that are down. For draining messages to your internal systems all you have to do (normally) is just wait a few seconds.
Your assumption about starting with the first machine and then proceed with the second after you finished the first sounds perfect to me.
I usually start with my C series and upgrade the M series after that. I had once a problem with a M1050 that was on a higher software level than my C series. (It could not retrieve the data from the C series). But I have never seen a real advice from Ironport on this.
Good luck,
Steven -
Whenever I updated or downloaded a new app from the App Store, a message appears saying:
"Account Not In This Store
Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."
I made some research online and asked a few of my friends with the same problem. All they did was sign out of iTunes from settings>iTunes & App Stores or from the App Store itself and signed back in. It worked for many of them but not with my iPhone 4s. It really does get on my nerves to always sign out and back in to the App Store as it sometimes works and allows me to update and download or most of the time it doesnt.
When viewing my Apple ID account on my iPhone (after entering the password) it either views my account or says:
"This Apple ID is only valid for purchases in the U.S. iTunes Store. You will be switched to that Store. Try your purchase again."
So I press on OK then either switches me to the App Store app of its choice, or says "Cannot connect to iTunes Store".
I tried restoring iOS6 hoping it was a bad installation, but i still have the same problem.
Can anyone help me please?
ArianAre you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
If you keep encountering problems contact iTunes support. They will help you sort it out. -
When I try to buy either an app or a song via iTunes, I have just started getting the following message and I am unable to change the store location. "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to the New Zealand store before purchasing."
This problem has only just started happening. I am on an iPhone5 iOS 7.0.4.
Very frustrating. Can someone please tell me why & where the change has occured and how to fix it? In the past I have purchased many apps and songs on itunes and never had this problem.
Thanks a mill :-)Click here and follow the instructions to change the iTunes Store country.
(97125) -
I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachabilityHey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris -
I keep getting this message when I try to update my apps and when trying to purchase new apps from the App Store. I checked my iTunes ID and it turns out that the country shown there is the one that I am actually living in. And it is the same as my billing address, but when I tried to update my apps again, I keep getting this message, 'you are not eligible for purchase of this item from the US store, please switch to the Malaysia store'. How do I solve this issue.
Besides ever since I updated my phone iOS it has started misbehaving, quite irritably at times. Dropped calls, slow typing, apps open very slowly, apps cannot be updated with prompts coming up like, this app cannot be updated now, please try again. I had to delete quite a few apps and reinstall them again. I had a trouble free experience with this phone till now, but is apple losing its magic.Thanks too all the people who responded. . . . (noone)
Got it sorted though. Seems that Apple has issues with multiple apple id's.
Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
Even after that it was extremely hard to get my apps back on my PC.
If anyone else has the same problem. . . .email Apple. Cya. -
I am trying to update my apps but keep getting a popup that says "Your Account is not valid for use in the US store. you must switch to the Canadian Store before purchasing." I can not find where to do this! Please help! Thank you!
[Apologies to pdesteele for this slight OT bit, but it's all relevant to your question, I think ]
We do have a place in the UK which we could use as an address, but for various reasons it gets a bit complex even though we still have a UK bank account. We moved to France when there were no iDevices and apps around, just bought the occasional music, so it wasn't a problem. Funny thing is I can't even download the free UK bank app because it's not available in the French store .
I'll live with the problem for now as we plan to move back to the UK in a year or so - we miss the weather . -
I am traveling out side of the U.S. and I am trying to up-date some apps on my iPod touch. Now I'm getting this message... "Account Not In This Store. Your account is NOT valid for use in the Ecuadorian store. You must switch to the U.S. store"
Please, is there anyone one out who can help me solve this problem? I just can seem to figure out how to get to the U.S. store... thanks!I just read this solution, tried it & now it's working...
I think I found a fix...I went to Settings, iTunes & App Stores, then click on your Apple ID...view Apple ID...change country region to USA (even though it was already USA...just do it again...go through the steps making sure the United States store is selected...agree to the Terms of Service, THEN I think what the key is is to RE-auhorize your credit card...in my case all I had to do was enter the security code...and it worked...I am now able to download the YouTube app for example...couldn't do it before. -
I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s
I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/
Maybe you are looking for
-
How do I change the network settings on my Apple TV? We have two wireless options and need to switch.
-
How to import styleSheet.css file in to my jsp page.
Hi All, I am importing css file and other common javascript functions using the below code <style type="text/css" title="currentStyle"> @import "/<some project Folder>/styleSheet.css"; </style> <script language="JavaScript" src="<%=request.
-
Using TV monitor while editing AVCHD footage
How do I do this? Back in the days of MiniDV (standard definition) I was able to wire everything up for this to work, but now I'm struggling! Thanks Richard
-
Functions in IMAQ Vision for Labview same as those in Vision Builder?
Hi all... i just have a simple question..Does IMAQ Vision for Labview has the same functions of Vision Builder? I know that with Vision Builder you can develop an application interactively...but does it has more functions than IMAQ Vision? So if i bu
-
Can't open Itunes on my pc, Please help me!
HI, i was updating itunes around 2 weeks ago. After i tried to start itunes but i won't start. I have tried to reinstall the program, but it didn't work either.