System error in routeneFI_TAX_GET_TXJCD_LEVELS error code 2 functionbuilder

System error in routeneFI_TAX_GET_TXJCD_LEVELS error code 2 functionbuilder Tax 2
We have recently implemented Taxware system to calcuate taxes. When an inter company billing document is created, accounting document is not releasing and giving above mentioned error message.
Scenario: US customer placed an order on Switzerland Sales org; and the material is delivering from US plant.
Inter company billing should happen between US company code and Switzerland company code. We have two invoices stuck with this error so far. If anybody has encountered this kind of issue please let me know the solution.

Hi Neeli,
1.Update your customer master record with tax jurisdiction codes, Please check ship to & sold to customer master records for tax codes.If this does not work goto 2.
2.Add the txjcd to the accounting document to be reveresed as well as change the tax category from the previous tax calc procedure to the current one. This will then allow the document to be reversed.
The document that needs to be released, and is getting the 'can't find tax code' error in the notes.
Correct values for TXJCD, TXJDP and TXJLV need to be added to the oringal document records that is to be released, tables: BSEG BSET KNOV and VBRP. In addition look into table KNOV for the field KNTYP. We had to address the KNTYP field in KONV because it stored the code for the previous taxing procedure, which cant be found in the current one. Changing it to the equivalent code for the current taxing proceudure worked.
Change information for each of the changed records should there be a need to go back. But so far it seems to be working. Tho some of the notes indicate the need to add txjcd data to existing records to fix a similar problem, we needed to go a step further and modify records in 2 additional table.
Again. We went from non-jurisdiction method where no jurisdictional information was captured to jurisdictional sales tax. And the issue is around reversing documents that were originally created in the previous taxing procedure.If this doe not work check 3.
3.Please refer SAP note 1157690 it has given code correction for this problem in function module.
Thank You

Similar Messages

The system has attempted to use an undefined value, which usually indicates a programming error, either in your code or

I have taken the cfdump for tmpqry and it shows all data for
the range ( No error at this step ) . But when we exceute this
dbquery we get below mentioned error .
<cfquery name="qry" dbtype="query" >
SELECT *
FROM tmpqry
ORDER BY #arguments.colSort# ASC
</cfquery>
senerio:
I am using createobject to create a reference for component
and call MDArraySort function in the cfc and getting this error .
'The system has attempted to use an undefined value, which
usually indicates a programming error, either in your code or some
system code.
Null pointer is undefined.... '
i am using this code in a cfc file.
<cffunction name="MDArraySort" Returntype="query"
access="public" >
<cfargument name="colArray" type="array"
required="true">
<cfargument name="colNames" type="string"
required="true">
<cfargument name="colSort" type="string"
required="true">
<cfargument name="sensorIDs" type="string"
required="true">
<cfscript>
var tmpqry = Querynew(arguments.colNames);
var qRow = QueryAddRow(tmpqry, Arraylen(arguments.colArray)
</cfscript>
<cfloop from="1" to="#Arraylen(arguments.colArray)#"
index="qRowIndex">
<cfscript>
sIndexinSensorIDs = colArray[qRowIndex]["SENSOR"]&"##";
Temp_readin_code =
colArray[qRowIndex]["READING_CODE"]&"##";
QuerySetCell(tmpqry, 'SENSOR', sIndexinSensorIDs,
qRowIndex);
QuerySetCell(tmpqry,
'TYPE',javacast('String',colArray[qRowIndex]["TYPE"]), qRowIndex);
QuerySetCell(tmpqry, 'TIMESTAMP2',
LSParseDateTime(colArray[qRowIndex]["TIMESTAMP2"]), qRowIndex);
QuerySetCell(tmpqry,
'ORDER_BY_PARAM',javacast('String',colArray[qRowIndex]["ORDER_BY_PARAM"]),
qRowIndex);
QuerySetCell(tmpqry, 'READING_CODE',Temp_readin_code ,
qRowIndex);
QuerySetCell(tmpqry,
'READING',javacast('String',colArray[qRowIndex]["READING"]),
qRowIndex);
QuerySetCell(tmpqry,
'PK_READING',javacast('String',colArray[qRowIndex]["PK_READING"]),
qRowIndex);
QuerySetCell(tmpqry,
'ALARM_STATUS',javacast('String',colArray[qRowIndex]["ALARM_STATUS"]),
qRowIndex);
QuerySetCell(tmpqry, 'DURATION',
javacast('String',colArray[qRowIndex]["DURATION"]), qRowIndex);
QuerySetCell(tmpqry,
'DESCRIPTION',javacast('String',colArray[qRowIndex]["DESCRIPTION"]),
qRowIndex);
</cfscript>
</cfloop>
<cfquery name="qry" dbtype="query" >
SELECT *
FROM tmpqry
ORDER BY #arguments.colSort# ASC
</cfquery>
<cfreturn qry >
</cffunction>
It is working fine for some date range and and getting above
mentioned error in sone situation .

Hi All ,
Thank you for your support ,
Finally i have fix the issue using some changes in my
function in cfc .
<cffunction name="MDArraySort" Returntype="query"
access="public" >
<cfargument name="colArray" type="array"
required="true">
<cfargument name="colNames" type="string"
required="true">
<cfargument name="colSort" type="string"
required="true">
<cfargument name="sensorIDs" type="string"
required="true">
<cfscript>
//Declare variable collection used in function as local
--->
var tmpqry =
Querynew(arguments.colNames,"CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_DATE,CF_SQL_VARCHAR,CF_ SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR");
var qRow = QueryAddRow(tmpqry,
Arraylen(arguments.colArray));
</cfscript>
<cfloop from="1" to="#Arraylen(arguments.colArray)#"
index="qRowIndex">
<cfscript>
// Populate the query table
QuerySetCell(tmpqry, 'SENSOR',
colArray[qRowIndex]["SENSOR"], qRowIndex);
QuerySetCell(tmpqry,
'TYPE',arguments.colArray[qRowIndex]["TYPE"], qRowIndex);
QuerySetCell(tmpqry, 'TIMESTAMP2',
LSParseDateTime(arguments.colArray[qRowIndex]["TIMESTAMP2"]),
qRowIndex);
QuerySetCell(tmpqry,
'ORDER_BY_PARAM',arguments.colArray[qRowIndex]["ORDER_BY_PARAM"],
qRowIndex);
QuerySetCell(tmpqry, 'READING_CODE',
colArray[qRowIndex]["READING_CODE"] , qRowIndex);
QuerySetCell(tmpqry,
'READING',arguments.colArray[qRowIndex]["READING"], qRowIndex);
QuerySetCell(tmpqry,
'PK_READING',arguments.colArray[qRowIndex]["PK_READING"],
qRowIndex);
QuerySetCell(tmpqry,
'ALARM_STATUS',arguments.colArray[qRowIndex]["ALARM_STATUS"],
qRowIndex);
QuerySetCell(tmpqry, 'DURATION',
arguments.colArray[qRowIndex]["DURATION"], qRowIndex);
QuerySetCell(tmpqry,
'DESCRIPTION',arguments.colArray[qRowIndex]["DESCRIPTION"],
qRowIndex);
</cfscript>
</cfloop>
<cfquery name="qry" dbtype="query" >
SELECT *
FROM tmpqry
ORDER BY #arguments.colSort# ASC
</cfquery>
<cfreturn qry >
</cffunction>
Rajesh
SCMS
India

The system failed to merge, error code : General Access denied

The system failed to merge, error code : General Access denied. Could anyone help me on this

Hi,
It could be several things, I think it could be a good start with the following page:
https://blogs.technet.com/b/chrad/archive/2009/10/02/differencing-disks-merging-80070005-error-just-one-persons-lesson-learned.aspx
If that doesn't help you could check out the following technet page to see if it is a permission problem. (it is not exactly the same problem but one of our customers once had the same problem and we solved it with the follwing KB:http://support.microsoft.com/kb/2249906/en-us
Hope this helps you out.

Idoc Error: Could not find code page for receiving system

hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty

BW Monitor error Could not find code page for receiving system

Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
Srinivas

The log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

My reinstallation of itunes is failed, error code is error 7 (windows error 126) the system find not msvcr80.dll script

my reinstallation of itunes is failed, error code is error 7 (windows error 126) the system find not msvcr80.dll script

https://discussions.apple.com/thread/5817040?tstart=0
....try everything in that thread, should fix the issue.

System task 'policyevaluator_unlock ' returned error code 0x8000fff in windows pacth deployment on windows 7 by sccm 2012 Sp1

hi All,
I have faced mentioned error in Win7's ccmexec.log file doing windows pacth deployment on windows 7 by sccm 2012 Sp1
system task 'policyevaluator_unlock ' returned error code 0x8000fff
Kirpal Singh

Thanks for reporting this symptom. We investigated and found that this error occurs when user unlocks the workstation. Due to this error, ccmexec service doesn’t request for user required policies when user
unlocks the workstation. We will investigate and address this symptom. Other than user unlock, all other user policy scenarios will be functioning as expected. The client will process user policies when user logs on as well as in the regular user policy polling
schedule”.
BC

Business rule in MDS 2012 error: A database error has occurred. Contact your system administrator.

I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes.
I'm running SQL Server 2012 11.0.3000
MDS database version 11.1.0.0
Any ideas?
MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
DateTime=2013-08-15T13:25:15.6684023Z
MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Error>
<Code>208</Code>
<Context i:nil="true" />
<Description>A database error has occurred. Contact your system administrator.</Description>
</Error>
</ArrayOfError>
DateTime=2013-08-15T13:25:15.7152026Z

OK I bit the bullet and contacted support on this one.
There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
order it worked like a champ.
Hopefully this helps save someone some time and money.

Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. and 'iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 193)

Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2

Warning/Error Message for Tax Code Mismatch between PO and Invoice

Hi Experts
Is there any SAP standard warning/ error message thrown when the User changes the tax code in the invoice which does not match the default tax code of the PO? The client would like to identify a 'tax code variance'.
If no, is there anyway we can configure this? I have checked in OMRM and OBA5 and could not find any relevant message types for the above requirement.
Any inputs would be helpful.
Regards

Hi,
Can you maintain the validation for your requirement, when user change the tax code system give warning or error message automatically.
Edited by: Lavanya.ch on Dec 15, 2011 8:15 AM

Exit Code: 6 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 8 error(s), 10 warning(s) WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated

Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 10 warning(s)
WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
----------- Payload: {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 -----------
ERROR: DF037: Unable to delete directory "/Applications/Adobe/AdobePatchFiles"(Seq 2092)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 2092)
ERROR: DF037: Unable to delete directory "/Applications/Adobe"(Seq 2093)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 2093)
----------- Payload: {4058E728-84D8-45CE-8E2D-5F35BD6659A1} Adobe Extension Manager CS5.5 5.5.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdiraXxwHaxr/Assets1/Adobe Extension Manager/Adobe Extension Manager CS5.5.app/Contents/Resources/ro.lproj/menubar.nib/classes.nib" to "/Applications/Adobe Extension Manager CS5.5/Adobe Extension Manager CS5.5.app/Contents/Resources/ro.lproj/menubar.nib/classes.nib" Error 0(Seq 953)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 953)
----------- Payload: {54D89F03-8EED-4FF9-BCDF-3B2E11D448A6} AdobeColorCommonSetCMYK 3.1.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'de_DE' try fetching for en_US(Seq 21)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'de_DE' try fetching for en_US(Seq 22)
----------- Payload: {45063C56-A2A2-4FD1-A56A-A964723EEE1E} AdobeColorCommonSetRGB 3.1.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'de_DE' try fetching for en_US(Seq 11)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'de_DE' try fetching for en_US(Seq 12)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Extension Manager CS5.5: Install failed
what can I do?
I tried the installation two times from a CD via shared CD drive

Hi Daniela,
Kindly check the Adobe - Adobe Creative Suite 3 Master Collection : System requirements
We would recommend you to copy the installer to the local machine and then try to install it.
If you still get this message try the download installer from : Download CS3 products
You should also check: Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Kindly share the results once done.
Thanks,
Atul Saini

Error in creating company code

Hi,
When creating my client's company code, I am getting error message stating that "Communication error with external tax system(VERTEX_MS0018), Message no.TAX_TXJCD864
Pl. give me clue that where I did wrong and what could be the reason for error.
Thanks in advance

HI ,
There are lots of thread on this . Please have a look. Some suggest OSS note as well.
company code creation.....
Communication Error with the External Tax system(VERTEX MS0018)
communication error with the external tax system(vertex_ms0018)

EDI invoice idoc error "Enter a tax code in item 000001"

Hello,
I am trying ot post the EDI invoice but the idoc getting failed by giving error "Enter a tax code in item 000001".
Even i entered the tax code in my idoc, system not taking and also as i have maintained the table OBCD & OBCE but system not consider it.
If i maintained the tax code in my PO then it is posting the invoice with PO tax code sucessfully.
Please let me know, Is their any other setting needs tobe done for idoc to post the invoice without maintained TAX CODE in PO ?
Thanks in advance
Regards,
Satish

No option available .you have to maintain tax code in PO.
Try your luck with following option Still not sure as it works only if you call transaction MIRO
OLMR -- incoming invoice -- maintain default value for tax codes

JSP client in RMI system - java.rmi.UnmarshalException: error unmarshalling

Hi,
Im developing a login part for a distributed airline reservation system using JSP as the client but while executing the jsp, the error that is being catched is :
java.rmi.UnmarshalException: error unmarshalling return; nested exception is: java.lang.ClassNotFoundException: AirlineImpl_Stub (no security manager: RMI class loader disabled)
Here are my codes:
//Interface - Airline.java
package Air;
import java.rmi.*;
public interface Airline extends Remote
     public int CheckUname(String username) throws RemoteException;
}//implementation - AirlineImpl.java
import java.net.*;
import java.io.*;
import java.sql.*;
import java.rmi.*;
import java.rmi.server.UnicastRemoteObject;
public class AirlineImpl extends UnicastRemoteObject implements Airline
     public AirlineImpl() throws RemoteException
          super();
     public int CheckUname(String username) throws RemoteException
          try
               int UnameCount = 0;
               String xxx = "eaglebeta";
               if(username.equals(xxx)
                    UnameCount++;
               return UnameCount;
          catch (Exception e3)
               System.out.println("Error: " + e3);
               return 0;
}//Server - AirlineServer.java
import java.rmi.*;
import java.rmi.server.UnicastRemoteObject;
public class AirlineServer
     public static void main(String arg[])
          try
               Airline myAirline = new AirlineImpl();
               Naming.rebind("Airline", myAirline);
               System.out.println();
               System.out.println("************************************");
               System.out.println(" >>> Airline Reservation System <<< ");
               System.out.println("    >>> Server is Listening! <<<    ");
               System.out.println("************************************");
               System.out.println();
          catch (RemoteException e)
               //System.out.println("Error: " + e);
               System.out.println("RMI Registry is not active!");
               System.out.println("Activate RMI Registry and retry!");
               System.out.println("Bye bye, exiting...");
          catch (java.net.MalformedURLException e)
               //System.out.println("URL Error: "+ e);
               System.out.println("URL Malformed!");
               System.out.println("Bye bye, exiting...");
}//JSP client - newuser.jsp
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<%@ page import="java.rmi.*, javax.servlet.*" %>
<%@ page import="java.util.*, java.lang.*, java.io.*, Air.Airline" %>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#99CCFF">
<%
Object Airline = null;
try
Airline Air = (Airline)Naming.lookup("rmi://localhost/Airline");
String Name = "eaglebeta";
if(Air.CheckUname(Name)>0)
     %>
          Username already exists, choose another name
     <%
else
     %>
     <%=Name%>
     <%
catch (Exception e1)
%>
<%=e1%>
<%
%>
</body>
</html>The server, implementation, interface and stub are in a folder named "Airline Server" located on my desktop.
The interface and stub again are in another folder named "Air" located in the "classes\Air" directory which is located in the tomcat 5.5 installation directory!
The JSP client is located in the "Root" folder in the tomcat 5.5 installation derectory!
1. I start the registry in the "Airline Server" folder by typing rmiregistry
2. Load the Airline Server - java AirlineServer
3. Call the jsp - http://localhost/newuser.jsp
And i get the following error:
java.rmi.UnmarshalException: error unmarshalling return; nested exception is: java.lang.ClassNotFoundException: AirlineImpl_Stub (no security manager: RMI class loader disabled)
Please help me to solve this problem!

When I am including security manager in my JSP code, the browser just get blank without any display
if(System.getSecurityManager() == null)
     System.setProperty("java.security.policy", "java.policy");
    System.setSecurityManager(new RMISecurityManager());
}Please, someone solve my problem! Im realy stuck and I don't know how to proceed! Provide me with a solution or any tutorial that would help me...

FBL3N- Abap error for new company code

Hello Forum,
I have created a new company code and created few GL accounts in My Test system. However when i try to run this report FBL3n it gives a runtime error.
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          02/11/2014 11:13:48
Short text
     Function module "LINE_ITEMS_GET_GKNOT" not found.
However it works fine with other company codes and report is executable and displaying the values properly.
Any help is apreciatable
Thanks
David

Hello David,
Please go through in the below link which is already answered for your query.
http://scn.sap.com/thread/1859902
Yes, you are correct there is no Function module "LINE_ITEMS_GET_GKNOT" with this name. PFA the screenshot for your easy reference.
This is because of spelling error. Correct FM is LINE_ITEMS_GET_GKONT
Please follow the below given steps to correct the FM Name spelling error.
Go to FIBF ---> Settings tab ---> Choose P/S Modules ----> Of a Customer ---->
Event: 00001650
Product: ZFBLOFF (which has been created in the previous step)
Function Module: LINE_ITEMS_GET_GKONT
Modify GKNOT as GKONT by choosing the correct line entry and then save.
I hope it will resolves.
Thanks & Regards,
Lakshmi S

System error in routeneFI_TAX_GET_TXJCD_LEVELS error code 2 functionbuilder

Similar Messages

Maybe you are looking for