T-code:FB60 and MIRO business place validation Section Code mandatory

Hi,
My requirement is to make mandatory in MIRO and FB60  field: BUPLA-business place and field:SECCO-Section Code.
I have done validation through GGB0 . i am facing problem
prerequisite: syst-tcode = 'FB60'
check bseg-bupla   <>   ' ' and  bseg-secco <> ' '
message 'Enter business place and business section.
This is working fine when bseg-bupla  and  bseg-secco  is not entered .
but when user enter value in both fields bseg-bupla  and  bseg-secco .
in table bseg-bupla and bseg-secco both become blank.
Is ther any other method to achieve this
regads,
K.Shobha.

Hi
Have you tried it with customizing tools? I understand that you can achieve it. I think that you want to populate these fields if you have a field status group for this account (check it in FS00). You can create a field status group for this account and do mandatory this fields. If you have doubts, search the help of a FI consultant.
If you see the help for this field:
Field status group
    Determines the screen layout for document entry.
    Fields can have the following statuses:
    o   Optional entry - you can enter data in the field
    o   Mandatory entry - you must enter data in the field
    o   Suppressed - the field does not appear on the screen
You can mantain it with tcode OBC4.
I hope this helps you.
Regards
Eduardo

Similar Messages

  • Business place filed should be mandatory in the T.Code F-43 & FB60

    Dear All,
    I want Business place field should be mandatory in the T.Code F-43 & FB60.
    I have gone and verified T.Codes OBC4-Field status group & OB41-Maintai posting keys .But there is no business place.
    Plz help me how to make it mandatory filed while posting transaction in F-43 & FB60.
    Thanks & Regards,
    Kumar.D

    Thank you Asha,
    I have created a validation for making  business place mandatory in T.Code F-43.It works properly.
    But when I post transactions in F-02 other than TDS  .System shows  the messag
    like "Business place is mandatory" which is created in validation for making  business place mandatory.
    So I want to validate the "Business place is mandatory" T.Code wise.I don't want Business place is mandatory in all transactions other than  F-43 & FB60.
    Could you Please explain  me how to do the same.
    I will assign good points
    Thanks in Advance
    Regards,
    Kumar.D

  • Business place validation

    Hi all,
    I created business place validation for T.Code F-43, FB60, FB65, FB70. Now i want to create the same validation for T.Code MIRO.
    please help to me, how to create validation for T.Code MIRO.
    Thanks in advance.
    Sunitha.

    Hi,
    Can you please elaborate what validation you are planning to set up for transaction code MIRO?
    Thanks
    Murali.

  • Reporting country on FB60 and MIRO for EU countries

    Hi,
    I am trying to post an Incoming Invoice  using FB60 or MIRO.
    Since the company code is defined as a EU country(Netherlands), the Reporting country and VAT registration number fields apear on the 'DETAILS' Tab on both MIRO and FB60.
    Once reporting country is entered, the VAT number gets selected from the Vendor Master.
    I have the following questions for which I need help:
    1. Is there a way to configure MIRO and FB60 so that the 'reporting country' is automatically selected and defaulted once I enter the Vendor Number? (similar to how the Payment terms gets defaulted from Vendor master).
    Currently, I have to enter the reporting country each time I enter an Invoice.
    2.If the Invoice is saved without entering the 'Reporting country', if I try to change the Invoice document, this field is not available for edit and so I cannot fill the Rptg country later. (The field appears in Document Header).
    Is there a way to handle this in FB60 and MIRO configuration so that the field 'reporting country' is available for change when we change document using Fb02? is there a seperate setting for this?
    Thanks,
    Uma Toraskar

    Hi Uma,
    did you find some solutions for your questions?
    Greetings, Vanessa

  • Why Business Place cannot be made mandatory?

    Hi Experts,
    Pls tell me why a Business Place cannot be made mandatory for entry during posting? This is required for taxation purposes in India but it cannot me made mandatory. Can anybody throw some light on this please?
    Regards
    Komal

    Hi,
    Validation and subsituions is used to customise SAP as per the Business requirement.
    It follows Three 3 steps:
    1.Prerequisite should be Met
    2. Check-- should not be met.
    3.Error- Than it gives error message.
    So yes even the Posting Key can be made complusory entry using Validation and subsitution for a particular transaction and many more things possible thru it.
    Please Use the T.code OB28 and OBBH for validation and subsitution respectively.
    And also take the help of Abapers if you want to kw more as they are more familiar with Tables and codes.
    Regards
    Shireesh

  • Miro - Business place

    Hi,
    I am facing the below mentioned problem with regard to Business Place with reference to Purchase order for Brazil
    The system has been set in such a manner that Business place has to be automatically determined. The Business Place for GL Account especially Taxes which are at header level are not getting determined where as at item level it is determined.
    As per my understanding At Item level, the business place is determined through Plant. But at header level it is not getting determined.
    I wanted to know the following.
    a) Is there any problem with Config Setting missed out.
    b) Is there any other solution.
    regards
    Umakanth

    Hi,
    Good afternoon and greetings,
    There is an option to define standard substitution option at header level, line item level using GGB1.  All you have to do is, define for a particular transaction, GL account and other relevant combination say that the system has to default the Business place from line item to header automatically and the system would do it...Defining the substitution rule in GGB1 would require basic skills of logical definition and it is easy...Work it out, if you are not able to proceed further please provide me your email ID and will guide you appropriately.
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Document clearing required in vendor invoice in FB60 and MIRO

    Hello Experts,
    I am posting one vendor invoice. I want to distribute one vendor invoice between two profit centers. Now SAP is posting following entries:
    Expense A/c... Dr (Cost Center: 100001 / Profit Center: 1000) - Rs.5000
    Tax Receivable A/c... Dr (Profit Center: 1100) - Rs.400 (Default profit center for this GL is pulled from FAGL3KEH)
        To Vendor A/c (Profit Center 1000) - Rs.5000
        To Vendor A/c (Profit Center 1100) - Rs.400
    In above entry, vendor line item is getting divided into two profit center. But my requirement is that, system should not vendor line item in two. It should post using document balance clearing A/c. Desired entry is:
    Expense A/c... Dr (Cost Center: 100001 / Profit Center: 1000) - Rs.5000
    Tax Receivable A/c... Dr (Profit Center: 1100) - Rs.400 (Default profit center for this GL is pulled from FAGL3KEH)
    Document Splitting clearing A/c... Dr (Profit Center 1000) - Rs.400
        To Vendor A/c (Profit Center 1000) - Rs.5400
        To Document Splitting clearing A/c (Profit Center 1100) - Rs.400
    Please help me in achieving the above set of entries. Following and attached are the settings done for document splitting:
    1. Vendor GL account is marked as 03000 (Vendor) without overridden tick.
    2. Tax GL account is marked as 05100 (Tax on Sales / Purchase) without overridden tick.
    3. Expense GL account is marked as 20000 (Expense) without over ridden tick.
    Please look into it and provide with your inputs

    Hi Deepak,
    check document splitting for gl a/c give vendor recon a/c gl and give item category as vendor.
    also check doucment type which you are using it should be vendor only.
    when ever you use document splitting don't use standard one copy it do the modifications.
    Regards,
    Raman

  • Business Place and Section Code - Validation

    Dear All,
    While posting a document through Tr Codes FB60/F-43/MIRO, Business Place and Section Code should be Mandatory fields, the system should not move forward to other screen untill and unless, entire this fields.
    Provide me the Validation steps with Screen Shots in GGB0 and OB28.
    please give me some solution as to :
    1. How to make mandatory OR
    2. How can i assign a default value, so that End Users do not miss it out any time
    Thanks
    Anil

    Hi Anil,
    Hi:
    Go to GGB0...
    In prerequisites
       BKPF-TCODE 'FB01' AND  BKPF-BUKRS = '1000' AND BSEG-KOART = 'K'
    please note in t code you can write any-other t code you are using for posting.
    Check
    BSEG-BUPLA = 'XXX' AND BSEG-SECCO = 'YYY'
    Message
    Error message to be assigned with type E
    Assign validation created in OB28
    Thanks
    Muthu

  • Business Place and Section Code Issues

    Dear Experts,
    I am using SAP IDES 4.7.
    For account type = K (Vendors), I have done WHT setting. Also through validations I have made Business Place and Section Field mandatory for the company code I am using.
    But the issue is the section code field BSEG-SECCO in not visible in any of the t.codes line F-43, FB60 or MIRO, so the validation is not working.
    Kindly help me how to make that field visible for all the transaction codes.
    Uttam.

    Please check if the following thread helps.
    Business Place & Section Code Field is missing in FB60// "Bus.place/sectn"
    Also, search this forum with keywords "business AND place AND section AND code AND FB60".  Make sure you choose ALL threads and not just the ones in the past 90 days (that is the default option that shows up!).  There are quite some threads/questions on this topic!!

  • Substitution rule for Business place and section code

    Hello Friends,
    We have a business place and a section code. I want to write a substituion rule for vendor invoice for business place and section code.
    When i see in header, i am not find BUPLA and SECCO in header. I am finding them in line item. How do i get these fields in header segment. I tried substution rule in line item, but the tds is not deducted.
    Thanks
    SK

    hi SK,
      i am not understand your problem. Previously i face one problem regarding business place and section code. While booking invoices and advance payments the user forgets to specify business place or section code and some times he specifys wrong business place also. Basing on business place or section code we cant restrict the users because there is no authorisation object.
    i created one validation that if my business area is 1000. then substitute the business place field with section code.
    we have business place individual business area wise so i created this substitution.
    Regards,
    Sankar

  • Miro not posted, error "Please Enter the Section Code  Business Place"

    Hi all,
       When I tried to post a document in MIRO, I am getting the following error "Please Enter the Section Code  Business Place" only for the one particular document.
                    However Business place or Segments are not configured. Even purchase documents are getting posted in MIRO, except the above one. If any one have any suggestions let me know...
    Thanks & Regards,
      Balaji
      9080444242

    Hello,
    Business Place & Section code are required to be mentioned in MIRO document for TDS purpose. It could be either determined automatically through substitution rule or the field could be made mandatory through validation.
    Business Place is created for TAN registration that your company has, Section Code is created in line with the bUsiness Place.
    Section Code derives the Business Place.
    Hence its compulsory to mention Sec. Code & Business Place while posting the transactions for TDS.
    Regards,
    jaymin r. bhatt

  • Business place and section code

    Hi SAP experts,
    With respect to India customization relating to section code and business place, i understand that business place is with respect to VAT regn and section code is with respect to TAN number held by a company.
    But do we need to create as many business places as section code and vice versa? In my current case we have about 14 VAT regn numbers and 1 TAN number. So do we just create one section code and one dummy business place and 14 real business places?
    Inputs highgly appreciated.
    Regards.
    SGP

    Hi,
    Business places are the location where tax is deducted. A company has various offices at Head Office, Regional offices etc. Tax can be deducted at any of these places. Withholding tax tracking is thus done based on business places.
    Section Code is used for each tax deduction account number (TAN) and accordingly to which TDS Certificates and Annual returns will be filed with tax authorities.It classify income tax and withholding tax payments depending on the location of income tax, and identify under which tax account deduction number (TAN) the item was posted.
    So depending upon in which state your plant/office resides , you can create that much number of Section Codes as given in example below.
    A company has a site in Bangalore, where its headquarters and a factory are located, and another factory in Mumbai:
    The Bangalore site has a TAN assigned by the Income Tax Officer of the Bangalore jurisdiction of TDS-1, Infantry Road, and a business place of M.G Road Bangalore
    The Mumbai factory has a TAN assigned by the Income Tax Officer of the Mumbai jurisdiction of JCIT, Central Range 10, and a business place of Mumbai South
    Hope it helps
    SJ

  • Number group not maintained for CO code section  and business place

    Hi Experts,
    I am Facing this error 'Number group not maintained for CO code section  and business place' while posting TDS entry ,
    I have maintained the number groups for internal challan numbers and i have also checked the table 'J_1IEWTNUMGR_1' , the entry exists, I am not able to track the problem.?
    the below mentioned are the example of the entry which is maintained inspite of which am facing the error.
    company code - 4001
    Business Place 4384
    Section  194I
    Thanks in Advance,

    Dear,
    Please check whether you have maintained entry in SPRO>IMG>Financial Accounting>****>Withholding Tax>Extended Withholding Tax>Posting>Certificate Numbering for Withholding Tax>Numbering Concenpt4 :Assign Numbering Group
    If not then please maintain the same.
    Regards.
    Vivek

  • Meaning of business place and section code

    Dear Friends,
    Can anybody tel me the meaning of business place and section code.
    Regds
    Rahul Jain

    Dear Rahul,
    Please refer the below points as per Indian company code point view
    1.  Section code is meant for EWT functionality.
    2.  with Section code we can identify the Income tax location.
    3. Business place is meant for VAT functionality.
    4. With Business place we will identify the Vat office location.
    Before VAT (Means before 2005) Business place is using for EWT.
    After VAT Business place to Section code Migration is available.
    for new Projects you can directly use the Section code for EWT.
    Other than India company code .
    Busines place is meant for VAT only.
    If you still need any further clirification please provide me your direct no?
    Reg
    Madhu M

  • Compulsory Business place in MIRO

    Hi Gurus
    I have a requirement from client, their requirement is in MIRO
    Business place  has to configured as Compulsory,
    I tried from my side, but failed, can you plz suggest solution for this requirement.
    Full Points...
    Manoj K singh

    Dear manoj,
    try this Tcode for validation  OB28
    make validation for Business Place / Section Code.
    Use Tcode OB28.
    ( SYST-TCODE LIKE 'MIR*' OR SYST-TCODE = 'FBA7' OR
    SYST-TCODE = 'FB60' ) AND BSEG-KOART = 'K'
    Assign points if usefull
    Rgds,
    Madhuri

Maybe you are looking for