T440s FP Reader Problem/Fa​ilure "Your fingerprin​ts have not been enrolled for authentica​tion."

I have a T440s CTO which is a great machine except that I no longer have part of the fingerprint reader functionality available to me.  The machine has a Synaptics Fingerprint Sensor.
At new and after enrollment of fingerprints, functionality included:
1) Swipe at power on password screen authenticated me a) through power on password, and, b) through Windows 7 Professional logon.
2) After machine recovers from sleep, a swipe at locked computer screen authenticated me through Windows 7 password query.
3) After machine locks after set timeout, a swipe at locked computer screen authenticated me through Windows 7 password query.
I no longer have functionalities 2) and 3) described above.  When I swipe at the locked computer screen, the message "your fingerprints have not been enrolled for authentication" appears at which point I have to type my password to unlock computer.
Since functionality 1) continues to work properly, my fingerprints are correctly enrolled. 
I have taken the following steps:
1) updated the driver for the Synaptics FP reader
2) deleted and re-enrolled my fingerprints (multiple times) through Lenovo Fingerprint Mgr. Pro v8.01.18(x64)
3) deleted fingerprint data from the Security tab of the BIOS setup utility.
The Synaptics device driver installed is version 4.5.266.0
Has anyone else experienced this issue?
LENOVO folks - please advise how I can resolve this so that the original functionality is restored.
Regards,
BIFF

OK - I left the domain and ran FP Mgr Pro and lo and behold, no fingerprints were enrolled.  Unfortunately, when I tried to enroll the fingers that I use for the FP reader, the machine told me that the fingerprints were already enrolled.  Recall that I did not delete the fingerprints that were enrolled under the domain before attempting to enroll at the machine level.
Then - I deleted the fingerprints at the domain level and deleted the fingerprints at the BIOS level.  I then logged in at machine level and enrolled fingerprints.
I rebooted and the machine asked for FPs at power on password and accepted my print.  Unfortunately, it booted me through power on and Windows security into machine level, not my domain which is where I need to be.
This is very frustrating. 

Similar Messages

  • Your Azure credentials have not been set up or have expired

    Hi,
    I realise this is a duplicate, but none of the suggested solutions are working.
    I have used Add-AzureAccount to successfuly login to my account in a new powershell window. As soon as I try to perform any function I get the error message "Your Azure credentials have not been set up or have expired, please run Add-AzureAccount to setup
    your Azure credentials."
    I have run Remove-AzureAccount and Remove-AzureSubscription so that none are present and repeated adding my account with Add-AzureAccount. I've used Select-AzureSubscription to ensure I have an active subscription, but none of the steps prevent this error.
    Please help.
    Thanks,
    Mike

    Hi,
    Have you tried to connecting to Microsoft Azure with the Certification method? If not please have a check on this:
    http://www.techkb.onl/connecting-azure-powershell-to-your-azure-subscription/
    http://azure.microsoft.com/en-in/documentation/articles/powershell-install-configure/
    Regards,
    Mekh.

  • I do not use or have not signed up for a MobileMe Account but I am getting duplicates in my iCal for some reason.  All discussions I read are pointing to the MobileMe being the problem but it is not.  Please help me.  There must be another reason.

    I do not use or have not signed up for a MobileMe Account but I am getting duplicates in my iCal for some reason.  All discussions I read are pointing to the MobileMe being the problem but it is not.  Please help me.  There must be another reason all my entries appear twice. 

    If you wish to submit comments to Apple, the best way is to use their feedback pages.
    http://www.apple.com/feedback/itunesapp.html
    It's not likely that anyone from Apple will see your comments here among the thousands of other posts.
    Regards.

  • Hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 :) what should i do need your help. thanks

    hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 what should i do need your help. thanks 

    Have you charged ipad Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo You may need to do this more than once. Bsydd uk

  • Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to

    Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to rectify the situation. Someone please guide me through this! Thanks in advance!

    Did this ever get resolved, as I am having the same issue.  Trying to learn LR5 AFTER a decade using Aperture.   I was able to set up a validated account but when I try to send an e-mail or photo I get the simple " Failed to Send " message.   Using latest version of Mac OS X.

  • How can I fix the text in my photo book that reads"your default text had not been edited. Printed books will not include this text?"

    How can I fix the text in my photo book that reads"your default text had not been edited. Printed books will not include this text?"

    You will get this warning, if your book includes textboxes that still include the default text, like "Insert Title". You need to find these boxes and add your own text.  Look for boxes like this:
    Make a PDF-preview of your book and look, where the preview differs from what you are seeing in iPhoto.
    iPhoto, Aperture: Previewing an order in iPhoto or Aperture

  • Hello I'm from mexico and I have the problem that my ipod touch 5g load not ..... I've been reading and this may in total discharge because I trying it a week and I have not been able to load what do I do? please help

    hello I'm from mexico and I have the problem that my ipod touch 5g load not ..... I've been reading and this may in total discharge because I trying it a week and I have not been able to load what do I do? please help

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
      - Make an appointment at the Genius Bar

  • Logon is not possible because you have not been assigned to a business role; please contact your system administrator

    Hi experts,
    I'm having a problem when our project approaching the end.
    If I assigned the business role in parameter CRM_UI_PROFILE and PFCG role in SU01.
    It works fine,and the user can logon the web ui.
    Now I created a new organization model and position,assigned the business role and user to the position.
       A PFCG role was also assigned to the business role:
    Then I removed all the roles and profiles in user master in SU01.
    The user can not login CRM WEB UI and the system raised "Logon is not possible because you have not been assigned to a business role; please contact your system administrator".
    Can anybody suggest what the problem is? Is there any other settings I should make?
    I suppose that,since the user was assigned to the position the organizational model, the system can determine the user's business role, and through the business role, the corresponding PFCG role can also be determined.
    Am I correct?
    Thanks.
    Jerry

    Jerry, yes, you're right.
    Let me point you to pretty good explanation right here: Logon is not possible because you have not been assigned to a business role; please contact your system administrator
    So business role determination is taken in three steps (you can observe them in class CL_CRM_UI_PROFILE_DETERM method LOAD_PROFILES):
    1. From user's parameter  CRM_UI_PROFILE (method LOAD_FROM_USER_PARAMETER);
         If  CRM_UI_PROFILE = * then the user needs to have S_DEVELOP authorization object with OBJTYPE = 'DEBUG' (debug authorization).
    2. If not found on previous step: From organizational management (method LOAD_FROM_ORG_MANAGEMENT)
    3. If not found on previous steps: Based on PFCG roles (method LOAD_FROM_PFCG_ROLE);

  • Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up allright, but the programs don't start when I press any buttons. How do I fix this problem?

    Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?

    If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
    Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER

    I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER PROMPT AND POSITIVE
    so I get looks but that is not my email recovery can help you reset your security information by sending a message to your email recovery: j ••••• @ mail.com

    You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (111384)

  • I have a LG Lucid, and after the recent software update, my Outlook mail quit working. I have not been able to get it to import my e-mail. Anyone else with this problem?

    I have a LG Lucid phone and after the recent LG software update, I have not been able to import my Outlook mail. Anyone else with this problem?

        Connecting through email is extremely important these days donhinson. Let's get this fixed today. I first recommend removing the email account and readding it back to your device.This will help reset the settings. Listed below are steps to check the email settings, outgoing, and incoming servings.
    1.From a home screen, select Apps (located in the lower-right).
    2. Select Email.
    3. From an Inbox, select Menu (  located below the display).
    4.Select Account settings.
    5.Select Account display name.
    6.Enter an name then select OK.
    7.Select My name.
    8.Enter the name then select OK.
    9.Select Signature.
    10.Select the desired signature.
    --To add a custom signature, select New signature (plus ( ) symbol located in the upper-right), enter the signature then 11. select Save.
    12.Select Retrieve interval.
    13.Select one of the following:
    --Manual
    --5 minutes
    --10 minutes
    --15 minutes
    --30 minutes
    --1 hour
    --2 hours
    --4 hours
    --8 hours
    14.Select Maximum emails to show.
    15.Select one of the following:
    --20 messages
    --40 messages
    --60 messages
    --80 messages
    --100 messages
    --200 messages
    --500 messages
    --1000 messages
    16.Select Delete from server.
    17.Select one of the following:
    --Never
    --When I download from server
    --When I delete from device
    18. Configure the following as appropriate:
    -- Enabled when a check mark  is present.
    --Forward message
    --Forward attachment
    19. Select Change login settings.
    19. Ensure the following settings are correct then select Save:
    --Username
    --Password
    --Email address
    --INCOMING SERVER SETTINGS
    --POP3 Server
              --Secure type (e.g. Off, SSL, TLS)
    --Port number
    --APOP secure login
    -- Enabled when a check mark  is present.
    --OUTGOING SERVER SETTINGS
    --SMTP Server
    --Secure type (e.g. Off, SSL, TLS)
    --Port number
    --Authentication. Enabled when a check mark  is present.
    --Username
    --Password
    I hope the information above is helpful.
    KinquanaH_VZW

  • Have not been able to receive or send iCloud email all day. Are others having this problem

    Have not been able to receive or send icloud email all day. Are others having this problem?

    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios that you have already tried w/Comcast.
    ==============
    Your post states you are using Lion.
    Your system profile confirms you are using Snow Leopard (OS 10.6.8)
    You posted in the Mountain Lion forums (OS 10.8.)

  • Since I installed Firefox I have not been able to send emails from aol. What is causing this problem and how do I fix it?

    Whether I am responding to an email or composing a new one I have not been able to consistently send emails since I downloaded FF. Once or twice I managed to send one but do not know why they went through since typically do not get past the technical problem message. The error always says there is a technical problem but does not specify the actual problem.

    In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]

  • I have a MacBook Pro and I opened an email, clicked on the link and then realized it may have not been sent by the person it appeared to have come from, what can I do to ensure there are no problems?

    I have a MacBook Pro and I opened an email, clicked on the link and then realized it may have not been sent by the person it appeared to have come from, what can I do to ensure there are no problems?

    Delete the cookie and cache of any website you visited that you are uncertain about.    That's in your browser preferences.  What Mac operating system and browser are we talking about?
    Did you attempt to download any software from the website, or just visit the link on the e-mail?   Or did you attempt to open an attachment on the e-mail?

  • Have not been able to use keynote if it's linked to icloud. It just starts and turns off quickly.  No problem if I toggle off using icloud. Any ideas.

    Have not been able to use keynote if it's linked to icloud. It just starts and turns off quickly.  No problem if I toggle off using icloud. Any ideas.

    Have you updated to the latest level of Keynote on your iPad? Keynote 2.0.1 (1075)  - Check Settings > Keynote
    If so, there isn't much that you can do other than report this bug to Apple http://www.apple.com/feedback/ipad.html
    You could try restarting or resetting your iPad.
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

Maybe you are looking for