'Tab' character used in the Message Built-in

Hi. I know you can concatenate a chr(10) function into the Message built-in, but is there a similar way to concatenate a 'tab' into the Message built-in or an Alert? Basically I want to pop-up a message and use the 'tab' character to seperate 2 columns of text. Like this:
"This a message to the user:
VarName1 <tab> VarValue1
VarName2 <tab> VarValue2
VarName3 <tab> VarValue3
VarName4 <tab> VarValue4"
Any help would be greatly appreciated.

Hello,
Can we see any example how in different ways/value you want to display in message?
For keep the orignal formatting/spacing in the forum page you can use tags before and after the example/coding section.
All small letters in curly brackets. See the FAQ on right corner of page for more clarification.
-Ammad                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Similar Messages

  • Tab character missing in the end of the line in file2file scenario?

    Hi,gurus:
    Our scenario is file to file,and both transport protocols are FTP.
    We are using content conversion both in sender and recevier side.
    But when we test the scenario,we found the tab character('0x09') is missing if the tab character is in the end of a line.
    Can you tell me how to keep these tab characters the same as sender file?
    Thanks in advacne.
    ps: in the content conversion,the parameter fieldSeparator and endSeparator are both '0x0A'.
    Edited by: xinjiang li on Jul 31, 2009 10:53 AM

    Hi,
    The source data is as below:
    H     0000140898     0     UCP31300     20090715     20090715     2     1     UCP31310     
    D     0000140898               00001                    
    After the record '00001',thare are some tab parameter,but after send content conversion,the payload is below:
      <?xml version="1.0" encoding="utf-8" ?>
    - <ns:MT_3PL_SAP2PF_ST02_SENDER xmlns:ns="http://www.unicharm-china.com/3PL">
    - <Recordset>
    - <Line>
      <Line>H 0000140898 0 UCP31300 20090715 20090715 2 1 UCP31310</Line>
      </Line>
    - <Line>
      <Line>D 0000140898 00001</Line>
      </Line>
      </Recordset>
      </ns:MT_3PL_SAP2PF_ST02_SENDER>
    The tab parameters are missing.
    Our sender content conversion is below:
    Line.endSeparator:'0x0a';
    Line.fieldSeparator:'0x0a';
    Line.fieldNames:Line
    Any ideas?

  • We have a new nano "5" and after fully recharging it, it drains out after 24 hrs with a few hrs use and the message "need to restore in itunes" appears. what gives?

    we have a "new nano 5" and after fully recharging it, it drains out after 24 hrs with a few hrs use and the message "need to restore in itunes" appears. what gives?

    akemma wrote:
    we have a "new nano 5"
    iPod Models

  • Tab key used as the shortcut key when using a text entry box

    When I use the Tab key as my shortcut key for a text entry box, it works fine in preview mode but does not work in the web browser preview mode.  I have tried to understand how I can take an existing project that is built for web browser application and make the tab key work.  The only thing I have been able to make my text feild entry take me to the next slide is to have the user click Enter instead of Tab and that is not the typical way we move between fields in the real application.  So....simulations is not accurate.  Can you give me step-by-step instructions on how to correct this problem in an already existing project?

    I think that you need to disable "Seamless Tabbing" in your file for it to work when published.
    You need to edit the HTML file that launches your course manually.
    Open your HTML file in notepad or equivalent
    Between the <object> </object> tags add:
    <param name="SeamlessTabbing" value="false">
    Save the HTML file again
    /Michael
    Click here to visit the www.captivate4.com blog

  • How to use the variables used in the message mapping

    Hi ,
    In the message mapping we can declare variables in the JAVA section , these variables could be used across the mapping .
    I have tried using it but I am unable to retrieve the values assigned to the variables in one UDF into the another UDF .
    Please guide me how to use the variables declared in the JAVA section in the message mapping .
    Thanks
    Anita Yadav

    Anita,
    I have worked on the Global variables and i found no issues. Make sure that the variable is declared in the Declaration Section and then initlaized in the Initialization section.
    If you declare a variable in the Declaration Section ,
    int i;
    then in any udf you can use if directly. No need to re declare  the variable in the UDF. If you do this, then it becomes a local variable.
    Regards,
    Bhavesh

  • What do the blue dots beside the addresses used in the messages address  and how did they get there?

    What do the blue dots next to the addresses in the address book used to address (TO) someone mean and how did they get there.  I unsuccessfully tried to use an email address, the message address line kept giving me a red "hand slap"with an ! Point.

    The blue dots mean the addressee has a device capable of using iMessage.
    Try using the phone number instead of the email address to send the message.

  • When using Curtain the message says screen ocked by ....

    When useing the Curtain on a client machine the screen shows who is controlling the system.
    The message reads: "The computer is locked by **name**"
    I would prefer to have the screen not show my name but say System Adminstrator.
    How can I do this?

    http://discussions.apple.com/thread.jspa?threadID=1149524&tstart=0

  • Why does Firefox 5 open links in a new tab or new window rather than within the same tab? Previous versions opened links in the same tab allowing use of the "back" button on the mouse. Having to close so many tabs and windows is really irritating.

    Vista Ultimate SP2

    The problem is just with the name of the tab, not with the contents of the page -- the page looks normal??
    I ask about the page because Firefox 23 seems to have introduced a problem with Firefox's "fast back-forward cache" on the Google search results page. It is related to the "instant prediction results" feature interacting with Firefox is some different way. (More in this thread: [https://support.mozilla.org/en-US/questions/970863?page=2#answer-485663])
    Might be related. Not sure.

  • Internal query that is used during the message search from EMC

    Hi,
    We have a requirement where in we need to identify the internal query that is executed ( since there were few mails that are being deleted at production instance, so want to know the details) when we search for the data from the following navigation:
    Oracle Email Center -> Messages -> Search.
    Could you please help us out in knowing the exact query as early as possible as it is of high priority.

    Thanks for your input.
    Let me explain how we solved our problem in brief:
    - We have created a new infobject for item number with 5 digits
    - We added this to the key in DEV system
    - We created a copy of the active table how it would look like after transport on DB level
    - We copied data 380 million records into the new table on DB level
    - We renmade the active table to xxx_old to have a back-up and then re-created an empty active table via SE14
    - We imported the transport when all 3 DSO tables were empty, which was very fast
    - We dropped the empty active table
    - We renamed the copy of the active table to carry the name of the active table
    During this process we ensured beforehand that SIDs are available for the new IOBJ. We also filled the new IOBJ by copying the values from the 3-digit IOBJ.
    All went well.

  • The camera on my ipad cannot be launched,the shutter appears closed and the button for taking a picture is not there. When tryying to use intsgram the message camera cannot be launched appears .tried to restart but problem still there

    My camera is not working .shutter appears closed.tried to restart ipad but problem still there.no problem with photo booth problem with istangram

    Try closing the Camera app via the taskbar and see if it works properly when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    And by restart do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear (you won't lose any content, it's the iPad equivalent of a reboot). If not, and if closing the app doesn't fix it, then you could try that.

  • Every time I use iMessage, the message is failed to send. I don't have poor connection and my iMessage is on. What do I do?

    I don't know what's going on. I tried sending a message to someone and it said failure to say. I tried sending a message to other people to see if it would work, but it didn't.

    See:
    iOS: Troubleshooting Messages
    Could be Apple problem but Apple is not reporting any problems
    http://www.apple.com/support/systemstatus/

  • Is it possible to use BAPI-ALE to send an idoc using the message control?

    Hi Guys
    Is it possible to use BAPi-ALE to send an IDOC using a message control?
    I have configured the system to send an IDOC when a outbound delivery is saved in the system.
    I have done the following.
    1). I am using the std BAPI-ALE interface provided by the object type LIKP.
    2). I am using the method SAVEREPLICA for which an interface already exists in BDBG transaction.
    3). I hace created a distribution model in BD64 and added the BAPI - LIKP and SAVEREPLICA
    4). Created a partner profile ( using the generate partner profile option in the BD64 transaction )
    QUESTION:
    1). How do i associate the custom OUTPUT type created for Delivery ?
    2). I tried to associate the custom output type in the Partner profile definition under the message control tab but i am not sure which Process code to be used? Since the partner profile was generated automatically from BD64 it has an entry for SHP_OBDLV_SAVE_REPLICA as a message type in the outbound parameters. and i am unable to find a process code for this Message type in WE41. So what process code should i use in the Message control tab against the custom output type?
    3). Do i need to leave the message control tab empty without making any entry? If yes then how would the system come to know that it needs to trigger this partner profile when the custom output type is proposed by the system?
    will award points for useful answers
    Edited by: Workflow  learner on May 29, 2008 8:49 PM

    "any way"
    Applications such as ScreenRecycler, http://www.screenrecycler.com/ScreenRecycler.html, can do it.

  • Using Message Built-In - Message dialog box appears twice

    Hi all,
    I'm using the message built-in to display messages in forms.
    I use the message command twice to make it appear as a dialog box.(Using it once displays it in status bar)
    Eg.
    Message('Hello World');
    Message('Hello World');
    Sometimes, the dialog box appears twice instead of once.
    Is there a way to solve this ?
    Regards,
    Sam

    With an alert, you can write up to 200 characters in the alert box. With a message, you can write up to 255 characters, and if you want the message to pop up in an alert box, you can write a double message. I use:
    Message('Hello World');
    Message(' ',no_acknowledge);

  • Using Message built-in

    Hello!
    I am trying to utilize the message built-in function in Forms6i to accomplish the following:
    Create and display a message w/ OK & Cancel buttons.
    If user selects CANCEL, return to the form and make no changes.
    If user selects OK, run a predefined set of instructions. If these instructions process without error, then display another message that reads 'Saved OK'. If there were errors, then display a message that reads 'Save not OK'
    Thanks for your time and input

    USE IN FORMS6I ALERTS.
    DECLARE
    alert_button     NUMBER;
    BEGIN
    alert_button := Show_Alert('MY_ALERT');
    IF alert_button = ALERT_BUTTON1 THEN
    DO SOMETHING
    ELSE
    END IF;
    END;
    READ MORE ABOUT ALERTS
    FIND_ALERT
    SET_ALERT_PROPERTY(alert_is,ALERT_MESSAGE_TEXT,errm);

  • HT204266 Trying to check for updates but when I hit updates I keep getting the message  cannot connect to iTunes. I'm signed in in my settings so not sure what else to do?

    I'm trying to connect to the app store to check for updates but when I go to the update tab I keep getting the message cannot connect to iTunes store. I am signed into iTunes in my settings so not sure what to do!

    You should not get that message if you are simply trying to load the shuffle with songs from your iTunes library.  If iTunes is trying to Update or Restore the shuffle, and you get that message, try the suggestions in this article
    http://support.apple.com/kb/TS1814

Maybe you are looking for