#TAB_LINK# value not set for tabbed navigation list

I'm a big supporter of searching the threads for an answer before posting. My apologies if I've overlooked this in the threads.
Like many others, I'm leveraging lists to mimic third level tab functionality. I'm trying to use the tabbed navigation list template. My targets for the list entries are pages within the application. When clicking the links however, #TAB_LINK# is not being interpreted within the link URL. #TAB_LINK# is simply appended to the end of the URL instead of being replaced with the actual link value, for example I would expect to see a typical htmldb page link with the target page value.
As a result, no navigation occurs to the target page. If I change the list template to horitzontal link list, the links function as expected, however I prefer the look of the tabbed navigation template.
Any suggestions?
David

I took a hint from my own post and checked the template that was working for me and noticed that the horizontal list template uses #LINK# instead of #TAB_LINK#.
I altered the tabbed navigation list template, replacing #TAB_LINK# with #LINK#, and now the tab links function as expected. I'm not sure if this fix will bite me later, or if this is a known issue. If there is a "proper" solution out there, I would still like to hear it. For now I'll assume my fix is a hack.
Thanks,
David

Similar Messages

  • Tabbed Navigation List Session State

    I converted regular tabs to a tabbed navigation list because the user wanted the tabs on the left side, on a region, not on the top of a page. Now when I navigate between pages using the tabbed navigation list the session state is not saved. For example: the user changes something in a field on page 1 without submitting the change, navigates to page 2, then back to page 1; the change they made on page 1 is gone. How can I prevent this from happening?
    I've checked all of the branches and navigation list targets to make sure I'm not clearing the session state.
    Thanks, Elizabeth

    First, I added Personal_Page under Action/Request.No, that sets the request value in the branch URL.
    so I added Personal_Page in Expression1 under Conditions and set the Condition Type to Request=Expression1That will work. Maybe you have a branch that fires before it so it never evaluated this branch. Anyway, my suggestion was to use an application process, not branches. The firing point of the process should be after-submit, before computations and validations. The process would contain a block like:
    declare l_page varchar2(30);
    begin
      case
        when :request = 'Personal_Page' then
          l_page := '3';
        when :request = 'some other value' then
          l_page := '4';
        -- etc.
      end case;
      apex_application.g_unrecoverable_error := true;
      owa_util.redirect_url('f?p=' || :APP_ID || ':' || l_page || ':' || :APP_SESSION);
    end;Scott

  • Substitution syntax in tabbed navigation list. Smart or Lucky?

    I've got a tabbed navigation list that I use on two separate pages.
    The list entry points back to the current page but sets a page item value based on the list item value.
    So this tabbed list might have items labeled E-mail, Phone, Address. When you click one of the list tab items it submits to the current page, sets a hidden field to EMAIL,PHONE, or ADDRESS. That hidden field controls which email,phone, or address region is displayed.
    OK easy enough. Except that I use the same list on multiple pages. Rather than create a list for each page, I made it more generic...
    So I set the item target as follows:
    Target type: Page in this application
    Page: &APP_PAGE_ID.
    Set these items: P&APP_PAGE_ID._ALIAS_REGION
    With these values: ADDRESS
    Notice that I've got substitution type syntax for the target page and the NAME of the item whose value I want to set. For example if the list is rendered on page 2 the target page becomes 2 and the item name becomes P2_ALIAS_REGION. On page 7, they are 7 and P7_ALIAS_REGION respectively.
    I also use this same syntax in the "Current List Entry" with a query like:
    select 1 from dual where :P&APP_PAGE_ID._ALIAS_REGION = 'ACTIVE'
    Now, I thought I was being clever in doing this, since it lets me use the same list on several similar pages. However the Apex Essentials Advisor is complaining about my syntax, and as awesome as that tool is, it got me thinking that I might be too clever for my own good.
    Is it valid to use this substitution syntax in this context? I mean it works, but is it supposed to work this way? If this is by happy coincidence then Apex developers please don't change how this works. If this is by design, then you guys/girls are awesome!

    Is it valid to use this substitution syntax in this context?Yes.
    I mean it works, but is it supposed to work this way?Yes.
    If this is by happy coincidence then Apex developers please don't change how this works.It is very unlikely that we would change any of the core substitution logic in ways that adversely affect behavior like this.
    If this is by design, then you guys/girls are awesome!Aw, shucks.
    Scott

  • Working with "tabbed navigation list" widths

    I have created a list of type "tabbed navigation list" and added it to a page. I modified the "template" for the page adding a bottom border to the table for the tabbed navigation list.
    http://htmldb.oracle.com/pls/otn/f?p=36420:1:
    How would I control the width of this tab navigation list?
    I would like to make the width extend to 100% of the page, however, I'm unable to control the width either by setting the region width or the template width for the tabbed navigation list.
    Thank you!

    Hello,
    Your Region Template is a table and collapsing down. Remove the region template or change it so the table has width="100%" or change it to Report Region 100% Template if your using one of the builtin themes.
    Carl
    Message was edited by:
    Carl Backstrom

  • Tabbed Navigation List

    Hi ,
    I am using Tabbed Navigation List in my application. The color of Labels on the tabs are misleading as it appears to be greyed out but is not. And also while we click on any of these tabs there is no indication of which tab is current. Is there a way I can change the color of the label on these tabs at runtime or design time. And Secondly is there a way I can dynamically change the label color to some green or red or even change the background of the tab to indicate to the user that this tab is current.
    Any help in these regard is greatly appreciated.
    Thanks
    sukarna

    Sukarna,
    The short answer is yes - all of this is possible. However, the exact implementation will very depending on a number of factors, most notably the theme/template your using. Can you put an example on apex.oracle.com? We'll need the workspace/username/password. You can create a new user account for this purpose.
    Regards,
    Dan
    http://danielmcghan.us
    http://sourceforge.net/projects/tapigen
    http://sourceforge.net/projects/plrecur
    You can reward this reply by marking it as either Helpful or Correct ;-)

  • Using a Variable in SSIS - Error - "Command text was not set for the command object.".

    Hi All,
    I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table  I have created variables v_Archivequery
    String packageLevel (to store the query).
    <Variable Name="V_Archivequery" DataType="String">
         SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
         FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
         ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
         Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
        </Variable>
    I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
    FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
    Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
    Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
    But when I am generating the package and when running I am getting bewlo errror
     Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
    An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80040E0C  Description: "Command text was not set for the command object.".
    Can Someone guide me whr am going wrong?
    Please let me know where am going wrong?
    Thanks in advance.
    Thankx & regards, Vipin jha MCP

    What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
    Could you try set the Delay Validation = True at Package and re-run ?
    If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
    -Vaibhav Chaudhari

  • Error "Lead selection not set for context node"

    Hi everyone,
    I've got a Tree control in WebDynpro ABAP and I've implemented an "expand all" button.
    Here's the coding:
    METHOD expand_node_rec.
      DATA lo_el_child TYPE REF TO if_wd_context_element.
      DATA lo_node_children TYPE  wdr_context_child_map.
      DATA wa_lo_node_children LIKE LINE OF lo_node_children.
      DATA lo_nd_child TYPE REF TO if_wd_context_node.
      DATA lo_kschl TYPE klschl.
      DATA lv_has_children TYPE boolean.
      lo_el_child = node->get_element( ).
      lo_node_children = node->get_child_nodes( ).
      node->get_attribute( EXPORTING name = 'KSCHL' IMPORTING value = lo_kschl ).
      node->get_attribute( EXPORTING name = 'HAS_CHILDREN' IMPORTING value = lv_has_children ).
      IF lv_has_children = abap_true.
        node->set_attribute( name = 'IS_EXPANDED' value = abap_true ).
      ENDIF.
      LOOP AT lo_node_children INTO wa_lo_node_children.
        lo_nd_child = wa_lo_node_children-node.
        me->expand_node_rec( node = lo_nd_child  ).
      ENDLOOP.
    ENDMETHOD.
    However I'm getting the error above: "Lead selection not set for context node".
    Any suggestions?
    Edited by: DEVELOPMENT THEMIS on Jul 7, 2011 6:34 PM

    hi developement Themis,
    I think u didn't diclare "node" as context node. So declare it as a context node before using as a context node..as below
    DATA node  TYPE REF TO if_wd_context_node.
    or u can use  "lo_nd_child " as ur context node in ur program in place of "node"
    then I think this error will be removed.
    thanks,
    simadri

  • CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

    csrAttachmentUploadDiv partattachment  is not rendered SP 2013(Attach file in not working for all the list forms)?
    Ravi
    function ShowPartAttachment() {
    ULSopi:
        if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
            alert(Strings.STS.L_FormMissingPart1_Text);
            return;
        (document.getElementById("part1")).style.display = "none";
        (document.getElementById("partAttachment")).style.display = "block"; //problem here

    Am also facing the similar problem....any iputs are highly appriciated.
    Issue..
    1) Defined the attachment type in IMG.
    2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
    3) Attached the excel file in the design.
    See the screen shot below:
    The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
    Please see the screen shot below:
    Did i miss any Configuration?? Please suggest...
    Regards,
    Naveen

  • Assessable value not maintained for the material X

    Dear all,
    i have maintained material chapter ID,Plant and materialchapter id  combination ,assessable value , cenvat determination, and vendor excise details in the transaction J1ID .
    Even after maintaining all these conditions , i am not able to save the po,while saving the po i got a error message that assessable value not maintained for the material X..
    Points will be rewarded for useful suggestions.
    Thanks in Advance.
    velu+91-9789991357

    Hi,
    Search using approriate keywords in SDN, u get most of the details, i have now done the same searched and have pasted below .
    Try ME2N.
    Click on the "dynamic selections" icon and add the release indicator as an additional selection. Enter the release indicators that you class as "awaiting approval" and you will then have your list.
    The ME2* series of transactions are not that much use prior to 4.7, the layout is poor. But if you have 4.7 or later you can get the screen to use the ALV format and this transforms the ME2* (i.e. ME2L, ME2M, ME2N etc.) transactions into VERY useful reports.

  • Change of Color on Tabbed Navigation List (Apex 4.1)

    Dear Friends,
    I am using apex 4.1
    I have a list on page 0 which is "Tabbed Navigation List" and there are three pages running on it.
    I want to change the color of the button when i click on the specific button.
    Can any1 help me in this regards. I will be obliged.
    Regards,
    Kamran

    Hi,
    >
    I have a list on page 0 which is "Tabbed Navigation List" and there are three pages running on it.
    I want to change the color of the button when i click on the specific button.
    >
    Not clear enough.
    Different Themes render Tabbed navigation lists in different way. Take a look at the Tabbed Navigation List template on Page 0. You will need to customize this template to achieve what you want.
    Regards,

  • Tab Navigation List - Current Tab

    I'm using a tab navigation list to hide/show regions on a page. When the page displays, all the tabs are showing the same way and there is no way to know what tab is current. Is there a way to change the display of tab if it is current?

    Hi,
    Edit the List you are using in the Tabbed Navigation.
    Under "Current List Entry" select "Colon Delimited Page list" and enter the page(s) in "List Entry Current for Condition" for each of the list entries.
    Regards,

  • Value not legal for this attribute:Attribute: MX_ACADEMIC_TITLE_1

    Hi All,
    Run initial loads on abap CUA ended in error below, also attached initial load log to this message.
    putNextEntry failed storingTESTCUAID1
    Exception from Add operation:com.sap.idm.ic.ToPassException: ToIDStore.addEntry failed storing entry 'TESTCUAID1'. IDStore returned error message: " Value not legal for this attribute:Attribute: MX_ACADEMIC_TITLE_1" when storing attribute 'MX_ACADEMIC_TITLE_1=0002'
    Exception from Modify operation:com.sap.idm.ic.ToPassException: ToIDStore.modEntry failed updating entry 'TESTCUAID1'. IDStore returned error message: "Entry does not exist" when fetching entry
    when i check the attribute storage value is text and when i check in abap entry type is text and number. like "0002" i tried change the value to number but still got the same error. could some one help me solve this issue.
    values in abap
    thanks
    sai

    Thanks a ton Steffi,
    i input values in attribute values tab --> all it went smooth.
    Thanks
    sai

  • Highlight a list (TABBED NAVIGATION LIST TEMPLATE)

    Hi everyone,
    I have created a list with template (TABBED NAVIGATION LIST 2) in my application.But its not highlighting the tab(as the list template is tabbed navigation) what i seleted.How can i highlight that selected list.Could anyone please help me to solve this.
    Theme: Business Look
    Thanks
    phani

    Could anyone help me how to change the template of that list (TABBED NAVIGATION LIST) to make it highlight the selected list.
    Thanks
    phani

  • Temp folder was not set for RTFStringbuffer Error

    Hi,
    We are using CR XI 11.0.0.895 and CR XI JRC is been used to generate the reports in PDF and RTF format.
    While generating report of more than 1000 pages in RTF format throws the below mentioned exception
    temp folder was not set for RTFStringbuffer
    However, Generating reports in PDF format generates the report.
    Find below the environment details which would helpful for the analysis.
    CR XI 11.0.0.895
    IE 6.0
    MS-office 2003
    Windows XP SP2
    Reports JRC application deployed on Weblogic 8.1.4
    Please suggest us a solution for this problem.
    Thanks in advance.

    If you run [Process Monitor|http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx], do you see any file access errors when the JRC tries creating a temp RTF file?
    I think I've recommended this before, but have you tried the newest version of the JRC?
    [https://boc.sdn.sap.com/node/19020]
    The XI Release 1 keycode will work with it.
    Sincerely,
    Ted Ueda

  • Lock NOT set for: Archiving the data from a data target

    Dear Expert,
    I try to archive one of my info cube, when i start to write the Archive file the Free Space in the Archive folder not enough and it make the process error.
    Then i try to changes the Archive folder to another path with enough free space. But when i start to write the archive file with new variant this error message came up :
    ==============================================================
    An archiving run locks InfoProvider ZICCPS810 (archivation object BWCZICCP~0)
    Lock NOT set for: Archiving the data from a data target             
    InfoProvider ZICCPS810 could not be locked for an archiving session 
    Job cancelled after system exception ERROR_MESSAGE                  
    ==============================================================
    Please Help Me.
    Wawan S

    Hi Wawan,
    If the earlier archive session resulted in error, please try to invalidate the earlier session in archive management and try running archive job again.
    Hope this helps,
    Naveen

Maybe you are looking for