Table borders quick question
When setting the border of a table, is it possible to remove
a certain side of the border? For example if you had a red border,
can you remove the bottom line of it only and leave the remaining
3?
Yes, just use CSS.
Similar Messages
-
http://www.ultimateautoshade.com/index2.html
has a table with rounded corners. This was accomplished using .jpg
images for each corner and .jpg images as background images for the
top, bottom and sides. Embedded in this table is another with
multiple rows and columns to house the text. The table appears
properly when viewed in DreamWeaver 8, however when I load it to
the server the table disappears. An example of what you should see
is at another site I built:
http://www.morrisonvein.com.
Note the multiple round corner tables display properly there.
The images in question are tbl_XX.jpg in the code attached.
Any ideas? Thanks in advance!Try to tak ethe printout of the pdf preview .
you may see the table borders as some times grpahics wont load properly but you can see if you print the output.
If not you have to again design the whole template without using the old one then it will work. -
Report Generation Toolkit Error Quick Question
Hi,
I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003. I took this to my production machine and ")@#(&%(*#^%()^!!!" The production machine has office 2007 and a fully licensed version of the RGT. Both machines have LabVIEW 8.6.0. I've read all the stuff about these errors and something about classes and dll's and whatnot's. So my quick question, is: Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect?
Solved!
Go to Solution.Hi
Quick Answer: Probably
Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
Best Regards
David
NISW -
Two quick questions about Library after moving beginning on a new computer
Hi there,
I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
Just a couple of quick questions.
1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file. Is this incorrect? Should I have imported a different file? Should I have used the itl file instead?
If so, should I delete the library and start again? (if this is the case, please suggest the best way of doing this without affecting my media)
- a kind of sub-question to this one: some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD. Is there a way I can find out which ones havent been recognized by iTunes? Whats the best way of getting them in to my library?
2. Pretty much half of my podcasts have not been loaded in the new iTunes. The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes. When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes? Or is there a risk that they will be deleted from my iPhone?
Cheers,The .xml is lacking some information such as ratings, date added, and play count. Using the .itl includes this information but cannot be imported using the method you did.
A complete library is everything in the iTunes folder. By using the method you did you left the artwork behind in the artwork folder on the other machine.
Selecting the media folder in preferences does not get iTunes to recognize the media. All it does is tell iTunes to start storing new media in that location.
Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391 -
Table borders offset in PDF output
I am using RoboHelp HTML, version 9 and I need to deliver two outputs for my documentation: WebHelp and PDF.
My table borders look the way I want them to in WebHelp and Word, single line and thin (1px).
But when we go to PDF, I get two sets of lines, one all the way around my cells, another with gaps of white space.
I think its something to do with 3d borders not getting totally eliminated.
I've added "table-collapse: collapse;" to all my table styles.
Any ideas?
Note: If I create a table originally in Word with thin single line borders, it looks fine in PDF.
Here's how it looks in WebHelp and Word...
And then in PDF...Peter,
Yes, as I mentioned in an earlier post, I really like the help design on your web site. I researched many looks in preparing for a new stylesheet project. Ended up emulating a lot of your elements rather than reinvent the wheel.
Hope you are OK with that. Imitation is the sincerest form of flattery (definitely in my case).
Anyhow, I figured out my problem. The CSS for my original tables was using 5px padding all around. In Word output, this gets converted to table cell margins.
And that's what the PDF conversion doesn't like. Take out the original CSS padding--or the converted Word cell margins--and the problem goes away, leaving clean unbroken table lines in the PDF.
Best regards. -
Quick question re select-options
Hi
I am relatively new to ABAP but have a quick question:
I need to create a select-options which does the following:
1. Allows ONLY "equals" signs
2. Disallows intervals
3. Disallows the use of ranges in the multiple selection box.
4. Allows multiple individual selections.
I can achieve most using the following:
select-options s_knvh for knvh-kunnr no intervals.
However, this still allows ranges using the multiple selection box, and also allows the "not equal to" option.
Adding the "no-extension" syntax simply removes my ability to use multiple individual entries.
Any ideas?
Thanks
JonUse this FM.
SELECT_OPTIONS_RESTRICT -
A quick question about WebDynpro SLD and R/3 with concurrent users
Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
GuyHi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran -
Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
NathanNormally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
Only experimentation will answer that one. -
When converting tables in a MS Word 2010 or 2007 to PDF the table borders do not retain the correct thickness as identified in the word document. Is there a solution for this issue?
Please try with latest version of MS Word and Acrobat.
Regards,
Anoop -
Table borders show up with Firefox or IE but not Safari (Win or MAC)
This very simple site (http://www.brandondean.net) has two table borders that show up under FF and IE but not Safari (either Win v4.0 or Safari for MAC, same result). I'm not an expert but I did the work using Dreamweaver 2004 MX as XHTML compliant, tested every page at W3C.org to make sure they comply with XHTML, and they do (except for my not putting in "alt" on images). I even downloaded Dreamweaver CS4 to run the "clean up the code" command and nothing is fixing the problem. I'm hoping someone out there has seen this before and can help us out. Thx.
Hi Gary,
It's probably just because the border widths you are specifying are too small (or WebKit is interpreting picas differently to Firefox/IE - I say WebKit as the same problem is visible in Google Chrome and that uses WebKit like Safari as well).
Try setting using this instead:
.borders {
font-family: Verdana;
font-size: 10px;
font-style: normal;
font-weight: normal;
font-variant: normal;
color: #cccccc;
text-decoration: none;
border: 1px solid #888888;
That seems to do the trick for Firefox and Chrome on this Linux machine I'm using at the moment. -
Hello - I'm pretty new to Motion and have 2 quick questions:
1) If you've got a bunch of keyframes on a timeline and want to make the entire sequence longer - is there a way to just pull the last frame out and have it automatically interpolate the keyframes in between so that it keeps the same timing and everything... it just makes the whole sequence take longer?
2) On the same timeline with a bunch of keyframes, can you apply one long Interpolation (ala "Ease Out") to the entire thing from A-Z so that the whole sequence eases out rather than just keyframe to keyframe?
Thanks!!
JasonHeya,
1. If you're asking if you have something like the "roving" keyframes in AE...well, kinda. Keyframes on footage, shapes, generators, particles, replicators—objects that create an image—don't seem to scale. But keyframes on secondary objects like behaviors and filters do scale.
2. Very easy: go into the Keyframe Editor and click on the animation state icon/menu for the parameter you want to change. The icon/menu is the last column after the parameter's value in the left-hand side of the Keyframe Editor. If you pick an interpolation type in that menu, it applies it to all keyframes in that particular curve. It's also the same place where you can set the before/after extrapolation, like ping-pong, progressive, etc. -
Poor Quality Table borders in PDF
Hello.
I am having problems having the tables borders in Word 2007 look the same in the PDF (using Arobat 9 Pro). The quality is very poor which appears the lines are thicker than in the Word document. I am using 4000 DPI, High Quality print but still looks bad. Images look good it is just the table borders that are the problem. Do you have any suggestion in improving this? Or is this a problem I have to live with?
Regards,
LenConverting Word (table) to pdf - lines screwed up - googled as far back as 2004.
BUG STILL exists. HELP/FIX PLEASE?
http://www.pcreview.co.uk/forums/missing-table-lines-conversion-pdf-t878406.html
http://forums.adobe.com/thread/305508
Trying to convert any word doc with tables (& shading) to PDF
- basic table, black borders throughout
- shaded headings, black outline border
- shaded subheadings, black outline border
However when convert to PDF:
- 'displays' NO top cell border for some/all shaded rows
- shows diff thickness lines
- each conversion, diff lines missing/incorrectly sized
- however converted pdf prints perfectly fine
Adobe know about the bug, per PRMW's (Paul's) post on 2009-07-15 15:44:34, however only offered a painful time consuming workaround using non-freeware Adobe Pro:
http://acrobatusers.com/forum/pdf-creation/word-pdf-table-lines-missing-or-faded#comment-7 8139
- "It is not feasable to edit 200+ tables in the PDF every time the PDF is generated, as we maintain the original in word.
- "This complete issue seems to have been passed off by Adobe as no problem and that there is a work around. I consider this an unsatisfactory response from a major product supplier.
Microsoft TechNet & NitroPdf said it's an Adobe issue & to contact Adobe to fix the bug.
Tried, but proble exists:
* Word 2010 > File > Save & Send > Create PDF/XPS Document
* Word 2010 > Save As > Pdf
* Word 2010 > Print > PrimoPdf (even tried properties > advanced > dpi 300/600/2400) > Custom
* Word 2010 > Print > doPDF v7 (even tried 'high quality images)
* Word 2010 > Print > PDFCreator
* Word 2010 > Print > CutePdf Writer (even worse)
* Nitro Pdf Reader > Convert From File > (even worse)
* www.pdfonline.com > Word to Pdf (even worse)
* www.wordtopdf.com > email: Sorry, an unexpected conversion failure occurred when converting your file.
Software:
* Word 2010 - tried with .docx & .doc (97 to 2003)
* Adobe Reader 8.2.6 (freeware), then upgraded to Adobe Reader X 10.0.1 (freeware)
* GhostScript 9.01 w32 (freeware)
* CutePdf Writer (freeware)
* PrimoPdf (freeware)
* Nitro Pdf Reader 1.4.0.11 (freeware)
* doPDF 7.2.361 (freeware)
* PDFCreator 1.2.0 (opensource - www.pdfforge.org)
Seems to display better at 300%, but lines still not right (even at 2400%), but who views pdf's at this zoom?
Message was edited by: shell_l_d -
HEllo ABAPERS,
KINDLY HELP .
I have developed a report which displays a html page in a custom control .But while printing it not displaying table borders . I have used method display_document ffor printing .Can anyone tell me the reason why is it not printing borders ?
Following code is the code for subroutine and PBO : -
MODULE status_0322 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
IF first_display EQ 'X'.
SET PF-STATUS 'PMENU'.
create document
CREATE OBJECT do.
fill document
PERFORM display_data USING do t_no.
merge document
CALL METHOD do->merge_document.
display the document inside the container named 'mmscr
CALL METHOD do->display_document
EXPORTING
container = 'MMSCR'
EXCEPTIONS
html_display_error = 1.
" do some exception handling ...
CLEAR first_display.
ENDIF.
ENDMODULE. " STATUS_0322 OUTPUT
*& Form display_data
FORM display_data USING p_do TYPE REF TO cl_dd_document P_no type n.
DATA ta1 TYPE REF TO cl_dd_table_element.
DATA col11 TYPE REF TO cl_dd_area.
DATA col12 TYPE REF TO cl_dd_area.
DATA col13 TYPE REF TO cl_dd_area.
DATA col14 TYPE REF TO cl_dd_area.
DATA col15 TYPE REF TO cl_dd_area.
DATA head1 TYPE sdydo_text_element.
DATA head2 TYPE sdydo_text_element.
DATA head3 TYPE sdydo_text_element.
DATA head4 TYPE sdydo_text_element.
DATA text TYPE sdydo_text_element.
CALL METHOD p_do->new_line.
CALL METHOD p_do->add_table
EXPORTING
no_of_columns = 5
cell_background_transparent = space
with_heading = 'X'
border = '5'
width = '50%'
IMPORTING
table = ta1.
set columns
CALL METHOD ta1->add_column EXPORTING heading = head1
width = '10%'
IMPORTING column = col11.
CALL METHOD ta1->set_column_style EXPORTING col_no = 1
sap_color = cl_dd_area=>list_background_int.
CALL METHOD ta1->add_column EXPORTING heading = head2
width = '15%'
IMPORTING column = col12.
CALL METHOD ta1->add_column EXPORTING heading = head3
width = '15%'
IMPORTING column = col13.
CALL METHOD ta1->add_column EXPORTING heading = head4
width = '15%'
IMPORTING column = col14.
CALL METHOD ta1->add_column EXPORTING heading = head4
width = '15%'
IMPORTING column = col15.
fill columns
text = ' '.
CALL METHOD col11->add_text
EXPORTING
text = text.
text = 'Init'.
CALL METHOD col12->add_text
EXPORTING
text = text.
text = 'Supv No'.
CALL METHOD col13->add_text
EXPORTING
text = text.
text = 'Date'.
CALL METHOD col14->add_text
EXPORTING
text = text.
text = 'Discrepancy Report Notation'.
CALL METHOD col15->add_text
EXPORTING
text = text.
CALL METHOD ta1->new_row
EXPORTING
sap_color = cl_dd_area=>list_background.
text = 'Q/C by'.
CALL METHOD col11->add_text
EXPORTING
text = text.
text = ' '.
CALL METHOD col12->add_text
EXPORTING
text = text.
CALL METHOD col13->add_text
EXPORTING
text = text.
CALL METHOD col14->add_text
EXPORTING
text = text.
CALL METHOD col15->add_text
EXPORTING
text = text.
CALL METHOD ta1->new_row.
text = 'Received by'.
CALL METHOD col11->add_text
EXPORTING
text = text.
text = ' '.
CALL METHOD col12->add_text
EXPORTING
text = text.
CALL METHOD col13->add_text
EXPORTING
text = text.
CALL METHOD col14->add_text
EXPORTING
text = text.
CALL METHOD col15->add_text
EXPORTING
text = text.
CALL METHOD ta1->new_row.
text = 'Sign Off'.
CALL METHOD col11->add_text
EXPORTING
text = text.
text = ' '.
CALL METHOD col12->add_text
EXPORTING
text = text.
CALL METHOD col13->add_text
EXPORTING
text = text.
CALL METHOD col14->add_text
EXPORTING
text = text.
CALL METHOD col15->add_text
EXPORTING
text = text.
CALL METHOD do->new_line
EXPORTING
repeat = 1.
ENDFORM.
MSKYou can use HTTP Receiver to pass the data to the servlet that runs on the HTTP Server. The servlet has already screen design logic written in HTML or jsp to display in HTML Table or so. PI requires to just post data on the servlet of HTTP Server using HTTP Receiver. PI will not create screen look and feel logic while posting data.
If you want HTML table coding logic refer this link
http://www.w3schools.com/html/html_tables.asp -
Quick Question: When to use ( ) and when to use [ ] and why the ( *)
Hi all,
A quick question that i'm sure is very simple but is slightly confusing me. I've just started trying to learn Objective-C and am a little confused by ( ) and [ ].
I get that you use the [ ] brackets when you want something specific from an object, i.e.
[ textField textColor ]
and that you use ( ) brackets for things like:
if ( x == y) {
But I get confused when I see things like:
NSLog(@"some text here");
Why does that get ( ) brackets and why is it not [ ].
Also another point of confusion, creating methods... Why are some methods done like:
- (void)awakeFromNib
And others done like (with the additional "*" added):
- (NSString *)stringvalue
As I said, I'm sure this is very simple and obvious, but it is confusing me slightly.
Thanks in advance!Adam:
As you already know, square brackets are used to send a message to an object, so if a object like myObject implements the method -doSomething, you can call it with:
\[myObject doSomething\];
The other use square for brackets have is to index C-style arrays, such as:
aValue = anArray\[10\]; // Get the 10-element of an array
However, because C-style arrays are rarely used in Cocoa applications (use NSArray instead) you will not see this situation often.
Parenthesis in expressions are used to group and prioritize, such as:
x = 10 * (3 + 5); // x = 80
If () statements use it to delimit the test expression. Same with while (). for () uses it to enclose the limits and increment statements, etc.
The other important use of parenthesis is in calling a C function:
result = foo(3);
means that you are calling the function named foo with the argument 3, and storing the the return value in the variable 'result'. This is different from a message because a C function is not a method of an object. They exist independently of any objects. NSLog() is a function defined within Cocoa but it is not a method. So, you call it with the traditional C function call syntax. Cocoa defines other functions like NSStringFromRect(), which takes an NSRect as argument and returns a pointer to an NSString.
And that leads me to your last question. Some methods return simple types, like int, float, or void (i.e. returns no value). These methods will have prototypes like:
\- \(void\)returnNothing;
\- (int)returnInteger;
Other methods return pointers to types, like:
\- (int \*)returnPointerToInteger;
\- (void \*)returnPointerToAnything; // In obj-C one typically uses id instead of void*
Returning whole objects from methods has problems and it is better to just return a pointer (the address in memory) instead:
\- (NSString *)makeAString;
The method above returns a pointer to an NSString rather than the entire object.
Good luck with your learning,
Juan-Pablo
Message was edited by: Juan Pablo Claude -
Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!
Maybe you are looking for
-
My Apple TV is not working with my Macbook pro 13 inch mountain lion after Apple TV upgrade?
My Apple TV is not working with my Macbook pro 13 inch mountain lion OS X 10.8.2 after Apple TV upgrade? I am getting an error message as soon as I try to connect my Apple TV An error occurred (-6722) while connecting to the AirPlay device "Apple TV"
-
Can I upgrade to Mountain Lion on my 20" iMac iMac 5,1 model running OSX 10.6.8
Can I upgrade to Mountain Lion on my 20" iMac iMac 5,1 model running OSX 10.6.8
-
Problem with permission - not even allowed to open Safari
Hi I have a mbp mid 2010 with 8gb ram running Lion 10.7.4 I have recently experienced problems with permissions, and have tried fixing it. The original problem was that I wasn't allowed to update the SW via the update tool. This problem arose approx.
-
Using StringMatchFilter in Log4J XML Config. File?
I'm trying to use the StringMatchFilter in an appender to determine based on the contents of the message when to send an email, when testing with single words it works great. For example if the message has "Here is a DEBUG" and my "StringToMatch" val
-
Using Gmail in iPhoto and cannot find any of my groups to email. I have at least seven or eight groups that I email, each containing over 50 addresses. Is there a way to locate my email groups using iPhoto to send out mail in Gmail? Using version 9.