Table control in display mode

Hello All,
Please tell me how to show table control in display mode,
My requirement is , whenever ill put T-code for table maintainace it should be appear in display mode.
Thanks,
Gaurav

table control or table maintenance?
Ok, let me assume that you have table mainteance view done for ZTEST table with Z_V_TABLE (maintenance view generated)
create a tcode now
1) transaction with parameters - se93 - tcode Z_TABLE
2) Transaction SM30
3) skip initial screen checked
4) maintain below values in default values in se93
VIEWNAME Z_V_TABLE
SHOW X
now when we run with Z_TABLE table it will always show in display mode.
Hope - I understood your question correctly

Similar Messages

Columns in table control in display mode in display transaction

Hi all,
I have a table control in a custom screen .Now i have few columns in the table control which need to be input enbaled but should be dislay only when thetransaction mode is "display" e.g VL33N.
I have written the follwoing lines of code:
IF sy-tcode = 'VL33N'.
    IF g_trtyp = 'A'.
      LOOP AT tc01-cols INTO wa_tc01.
        IF wa_tc01-screen-group1 = 'G2'.
          wa_tc01-screen-input = 0.
          MODIFY tc01-cols FROM wa_tc01.
        ENDIF.
      ENDLOOP.
ENDIF.
ENDIF.
However the specific olumns in table control are not displayed in display mode when in display transaction!
Can anyone suggest what am i doing wrong?
thanks.

I would have answered if you followed forum rules (as I can see in your previous posts, missing feedback, closed without any info)

Table control in create mode

Hi,
I created a table control in a standard transaction code.
when iam clicking create button, The table control
is displaying in display mode.Now I should provide to the user
to add the entries in the table control in create mode.
Can any body resolve this issue with coding.
urgent requirement.

Hi,
In a PBO module of the screen, ypu have to write a code to find out the number of lines of the internal table used for the table control.
The code for this would be.
DESCRIBE TABLE tb_line LINES lin.   * 'tb_line' is the internal table and 'lin' holds the number of lines*
tcl_item-lines = lin.                             tcl_item is the name of the table control*
Now in the PBO, you have to make the table control editable or non editable by checking with the transaction.
Here i in the below code, there are 3 transactions for create,display and change.
If the transaction code is either 'ZCREATE09' or 'ZCHANGE09' , then the lines in the table control are checked.If the table control is not empty,then it is editable.
During the display transaction,it is kept in non editable mode.
CASE sy-tcode.
    WHEN 'ZCREATE09' OR 'ZCHANGE09'.
***Checking if the table control is empty or not***
      IF lin NE 0.
        LOOP AT SCREEN.
***To make the screen editable****
          screen-input = 1.
        ENDLOOP.
      ELSE.
        LOOP AT SCREEN.
          IF screen-name CS 'TB_LINE'.
****To make the screen non-editable if no values are present in the
***table control****
            screen-input = 0.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
****To make screen non editable during the display transaction****
    WHEN 'ZDISPLAY09'.
      LOOP AT SCREEN.
        screen-input = 0.
        MODIFY SCREEN.
      ENDLOOP.
ENDCASE.
Reward if helpfull.
Thanks,
Kashyap

How to display particular ROW of a table control in display/change mode

Hi,
Can we make particular ROW in a table control display mode or editable mode depending upon the conditions?.
Any inputs..
Rgds,
Lakshmiraj

Hi,
Yes it is possible. check the follwoing code for help.
*& Include Z101954_ASSIGNMENT1I01
*& Module VALIDATE_SALES_ORG INPUT
 text
MODULE validate_sales_org INPUT.
SELECT SINGLE zvkorg FROM vbak INTO zvbak-zvkorg
*WHERE zvbeln = zbookhdr-zvbeln.
IF sy-subrc <> 0.
 MESSAGE 'INVALID AIRLINE ID INPUT' TYPE 'I'.
 CALL SCREEN 1000.
ENDIF.
ENDMODULE. " VALIDATE_SALES_ORG INPUT
*& Module USER_COMMAND_1001 INPUT
 text
MODULE user_command_1001 INPUT.
var3 = 1.
IF sy-ucomm <> 'SAVE'.
 PERFORM material_check.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT MATERIAL NUMBER' TYPE 'I'.
 ELSE.
 SELECT SINGLE zmaktx zmeins zwaerk zstprs FROM zmara
 INTO CORRESPONDING FIELDS OF it_salesitems
 WHERE zmatnr = it_salesitems-zmatnr.
 SELECT SINGLE zwerks zlgort FROM zorg
 INTO CORRESPONDING FIELDS OF it_salesitems
 WHERE zvkorg = wa_salesorder-zvkorg
 AND zvtweg = wa_salesorder-zvtweg
 AND zspart = wa_salesorder-zspart.
 it_salesitems-znetwr = it_salesitems-zstprs * it_salesitems-zbrgew.
 MODIFY it_salesitems FROM it_salesitems INDEX sy-tabix.
 MOVE-CORRESPONDING it_salesitems TO temp_salesitems.
 APPEND temp_salesitems.
 REFRESH it_salesitems.
 ENDIF.
ENDIF.
LOOP AT temp_salesitems.
if it_salesitems-pick = 'X'.
 LOOP AT SCREEN.
 IF screen-name EQ 'DETAIL'.
 screen-input = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
 endif.
 endloop.
CASE sy-ucomm.
 WHEN 'SAVE'.
 PERFORM check_ship_to_party.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT SHIP TO PARTY ' TYPE 'I'.
 ELSE.
 PERFORM check_payer.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT PAYER' TYPE 'I'.
 ELSE.
 PERFORM check_bill_to_party.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT BILL TO PARTY' TYPE 'I'.
 ELSE.
 wa_salesorder-zernam = sy-uname.
 MOVE-CORRESPONDING wa_salesorder TO zvbak.
 MODIFY zvbak.
 LOOP AT it_salesitems.
 it_salesitems-zvbeln = wa_salesorder-zvbeln.
 MOVE-CORRESPONDING it_salesitems TO zvbap.
 MODIFY zvbap.
 ENDLOOP.
 IF sy-subrc = 0.
 MESSAGE 'THE DATA IS SAVED SUCCESSFULLY' TYPE 'I'.
 CLEAR wa_salesorder.
 REFRESH it_salesitems.
 REFRESH temp_salesitems.
 IF sy-tcode = 'ZVA01'.
 CALL SCREEN '1000'.
 ELSE.
 CALL SCREEN '1003'.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
 WHEN 'DETAIL'.
 CALL SCREEN '1002'.
 WHEN 'BACK'.
 IF sy-tcode = 'ZVA03'.
 CLEAR wa_salesorder.
 CALL SCREEN '1003'.
 ELSE.
 PERFORM pop_up.
 ENDIF.
 WHEN 'EXIT'.
 IF sy-tcode = 'ZVA03'.
 LEAVE PROGRAM.
 ELSE.
 PERFORM pop_up.
 ENDIF.
 WHEN 'CANCEL'.
 IF sy-tcode = 'ZVA03'.
 CLEAR wa_salesorder.
 CALL SCREEN '1003'.
 ELSE.
 PERFORM pop_up.
 ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 INPUT
*& Module input_help_sold_to_party INPUT
 text
MODULE input_help_sold_to_party INPUT.
SELECT zkunag FROM zvbak INTO CORRESPONDING FIELDS OF TABLE
 itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
DDIC_STRUCTURE = ' '
 retfield = 'ZKUNAG'
PVALKEY = ' '
 dynpprog = sy-cprog
 dynpnr = '1000'
 dynprofield = 'ZKUNAG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
 value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
 TABLES
 value_tab = itab
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " input_help_sold_to_party INPUT
*& Form pop_up
 text
--> p1 text
<-- p2 text
FORM pop_up .
CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
TITLEBAR = ' '
DIAGNOSE_OBJECT = ' '
 text_question = 'DO YOU WANT TO SAVE THE ORDER?'
 text_button_1 = 'YES'(001)
 icon_button_1 = ' '
 text_button_2 = 'No'(002)
 icon_button_2 = ' '
 default_button = '1'
 display_cancel_button = 'X'
 userdefined_f1_help = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IV_QUICKINFO_BUTTON_1 = ' '
IV_QUICKINFO_BUTTON_2 = ' '
IMPORTING
 answer = ans
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CASE ans.
 WHEN '001'.
 PERFORM check_ship_to_party.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT SHIP TO PARTY ' TYPE 'I'.
 ELSE.
 PERFORM check_payer.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT PAYER' TYPE 'I'.
 ELSE.
 PERFORM check_bill_to_party.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT BILL TO PARTY' TYPE 'I'.
 ELSE.
 wa_salesorder-zernam = sy-uname.
 MOVE-CORRESPONDING wa_salesorder TO zvbak.
 MODIFY zvbak_101954.
 temp_salesitems-zvbeln = wa_salesorder-zvbeln.
 MOVE-CORRESPONDING temp_salesitems TO zvbap.
 MODIFY zvbap.
 IF sy-subrc = 0.
 MESSAGE 'THE DATA IS SAVED SUCCESSFULLY' TYPE 'I'.
 CLEAR wa_salesorder.
 REFRESH it_salesitems.
 REFRESH temp_salesitems.
 IF sy-ucomm = 'EXIT'.
 LEAVE PROGRAM.
 ENDIF.
 IF sy-tcode = 'ZVA01'.
 CALL SCREEN '1000'.
 ELSE.
 CALL SCREEN '1003'.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
 WHEN '002'.
 IF sy-tcode = 'ZVA01'.
 CLEAR wa_salesorder.
 REFRESH it_salesitems.
 REFRESH temp_salesitems.
 CALL SCREEN '1000'.
 ELSE.
 CLEAR wa_salesorder.
 REFRESH it_salesitems.
 REFRESH temp_salesitems.
 CALL SCREEN '1003'.
 CLEAR ans.
 ENDIF.
ENDCASE.
ENDFORM. " pop_up
*& Module USER_COMMAND_1002 INPUT
 text
MODULE user_command_1002 INPUT.
IF sy-datar = 'X'.
 PERFORM material_check.
 IF sy-subrc <> 0.
 MESSAGE 'ENTER THE CORRECT MATERIAL' TYPE 'I'.
 ELSE.
 SELECT SINGLE zmaktx zmeins zwaerk zstprs FROM zmara_101954
 INTO CORRESPONDING FIELDS OF wa_salesitems
 WHERE zmatnr = wa_salesitems-zmatnr.
 wa_salesitems-znetwr = wa_salesitems-zstprs * wa_salesitems-zbrgew.
 ENDIF.
 var = 1.
ENDIF.
IF sy-ucomm = 'BACK'.
 LOOP AT temp_salesitems.
 MODIFY temp_salesitems FROM wa_salesitems .
 ENDLOOP.
 it_salesitems-pick = ' '.
 CALL SCREEN '1001'.
ENDIF.
ENDMODULE. " USER_COMMAND_1002 INPUT
*& Module USER_COMMAND_1000 INPUT
 text
MODULE user_command_1000 INPUT.
CASE sy-ucomm.
 WHEN 'NEXT'.
 SELECT * FROM zt001k_101954 INTO CORRESPONDING FIELDS OF
 temp_salesorder WHERE
 zvkorg = wa_salesorder-zvkorg AND
 zvtweg = wa_salesorder-zvtweg AND
 zspart = wa_salesorder-zspart.
 ENDSELECT.
 IF sy-subrc = 0.
 CALL SCREEN '1001'.
 ELSE.
 MESSAGE 'Invalid Data Entered' TYPE 'I'.
 CALL SCREEN '1000'.
 ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_1000 INPUT
*& Module USER_COMMAND_1003 INPUT
 text
MODULE user_command_1003 INPUT.
IF sy-ucomm = 'NEXT'.
 IF sy-datar = ' '.
 MESSAGE 'ENTER PURCHASE ORDER NUMBER' TYPE 'I'.
 CALL SCREEN 1000.
 IF NOT wa_salesorder-zvbeln CO '0123456789'.
 MESSAGE 'PURCHASE ORDER NUMBER IS NOT IN THE EXPECTED FORMAT' TYPE 'I'.
 CALL SCREEN '1003'.
 ENDIF.
 var3 = 0.
 CALL SCREEN '1001'.
ENDIF.
ENDMODULE. " USER_COMMAND_1003 INPUT
*& Module input_help_sales_order INPUT
 text
MODULE input_help_sales_order INPUT.
SELECT zvbeln FROM zvbak_101954 INTO CORRESPONDING FIELDS OF TABLE
itab1.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
DDIC_STRUCTURE = ' '
 retfield = 'ZVBELN'
PVALKEY = ' '
 dynpprog = sy-cprog
 dynpnr = '1003'
 dynprofield = 'ZVBELN'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
 value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
 TABLES
 value_tab = itab1
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " input_help_sales_order INPUT
*& Module back_command INPUT
 text
module back_command input.
*if sy-ucomm = 'SAVE' OR 'BACK' OR 'DETAIL' OR 'EXIT' OR 'CANCEL'.
*endif.
endmodule. " back_command INPUT
Regards
Rajesh Kumar

Table Control in Editable mode

Hello All,
I have created an infotype which has a table control. But all the table control lines are in non-editable mode. I would like to have all the lines in editable mode.
Kindly help out.
Regards,
shails

If your internal table contains no record and when you are refering to the table control then all the lines will get disabled.
Now you will be knowing the number of lines your table control displays in singe page...say 10 lines.
So initially in the PBO append 10 initial lines to your itab. then set the property lines of the table control to the total lines of internal table.
Now in pbo capture the user command page down and append 10 initial lines to your itab.
Hope you got the idea.
Now if your itab already has some records , then just set the lines as total record count of your internal table.
Also change the property in the screen attributes for each field of the control

How do I click on a cell in a table control, and display the value in a string?

What I would like to do is to click on a cell in a table control, and have the value of the cell be displayed in a string indicator. What ever cell I click on, I would like the value to be displayed in the indicator.
Thank you!
Solved!
Go to Solution.

... or
Event >>> ouse down for table.
Use Coords" to feed invoke node "point To Row Column" and returned "Cell Postion" can be unbundled to produce the row and column tht can be used to index out the value.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

GET_P Method for Link in table - only in display mode

Hello,
i created an assignmentblock to display a ztable (Simple Object).
One column in the table is homepage.
For this attribute i added some coding to the GET_P_Method to have a link.
The link works fine - but i have this link now not only in display mode but also in edit mode for the table.
As a sideeffect this column is now longer editable.
How should i change my GET_P coding so that the link is only there in display mode. In edit mode the field should be editable (no link).
Thank you
Best regards
Manfred

Hello Manfred,
I do not know about your system... but the usual GET_P-methods do have an importing parameter IV_DISPLAY_MODE. This tells you if you are in display or edit mode.
Check method CL_BT115QH__DETAILS_CN00->GET_P_ORDER_REASON.
Or even more general: GETP_XYZ in your context node class.
The part with the IF statement should be trivial.
cheers Carsten

Initial value in table control is displayed as space for currency field

Hi Experts,
I have a problem with table control in module pool. Below is the code for populating the table control:
loop at   GT_NEW_ABAN
       into GT_NEW_ABAN_WA
       with control TAB_FAC_ABAND
       cursor TAB_FAC_ABAND-current_line.
    module TAB_FAC_ABAND_get_lines.
*&spwizard:   module TAB_FAC_ABAND_change_field_attr
endloop.
The internal table GT_NEW_ABAN and the work area GT_NEW_ABAN_WA are declared as below:
DATA: GT_NEW_ABAN LIKE ZTABANDON OCCURS 0 WITH HEADER LINE,
   GT_NEW_ABAN_WA LIKE ZTABANDON ,
while debugging the value of a field in GT_NEW_ABAN_WA is coming as 0.00, but in the screen display it is coming as space.
In the structure ZTABANDON the data type of the particular field is CURR, and in the layout it is DEC.
How can I fetch the same value 0.00 as coming in the work area to the screen display? How to change the space to 0.00?
Regards,
Soumya.

Hi,
In the screen painter double click on the fieldname. It will show the properties. There make the type of the field as Currency(CURR I think).
Regards,
Renjith Michael.
Edited by: Renjith Michael on Jan 12, 2008 4:18 PM

Table Control not displaying selected data

I have 2 screens, screen 100 is the selection screen where i select the data to be displayed and 300 is my table control. When I select a single airline in screen 100, it displays all the airlines in my table control in screen 300, how can i fix?

Table control if built via the screen painter wizard uses the contents of internal table declared in the main program and defined in the wizard to display. Check how you are filling this table, perhaps your filling it incorrectly.

Error in table control while displaying data.

Hi All,
I m doing module pool programming using Table control.
I m using one table only and declared internal table like the database table.
When I m transferring data from internal table to Table control screen, I m getting error like.
A conversion error occurred while the program was trying to
display data on the screen.
The filed is of DEC type and it is having some value with negative sign.
Whether I have to change field type of sceen element and if so then to which data type?
Or any other way to handle such situation.
Thanx.
Umesh.

Hello,
Please check whether the screen field name of the table control and the type
is same as the internal table that you are using to populate.
reward if helps
Thanks
Krishna
Message was edited by:
Krishnakumar Ramadoss

Tab in Tabstrip Control in display mode (Module Pool)

Hi friends,
I am trying to give authorization based on sy-uname, in runtime based on uname the particular tab should be opend in a display mode and some in change mode. please help me out in this
Edited by: shravan sonayila on Aug 12, 2008 8:06 AM

Hi,
when u creating tabstrip,while defining each tab in tabstrip , u have to
create one subscreen for each tab.i think u want one tab for display
mode and one tab for edit mode. if u want this way , in one tab try to
give fields all in invisible mode this for display mode and goto second tab if u want all visible only keep like that only other wise u have create geoups.when u press enter ,groups will be change.it means visible , invisible modes.
u have to give logic for screen in pbo.
*&      Module STATUS_0300 OUTPUT
      text
module status_0300 output.
set pf-status 'GUI_300'.
set titlebar 'TITLE_300' with v_title.
if i_aktyp = 'H'.
    if temp_flag = 1.
      loop at screen .
        if screen-group1 = 'GP2'.
          screen-input = 1.
          modify screen .
        else.
          screen-input = 0.
          modify screen.
        endif.
        temp_flag = 0.
      endloop.
    else.
      loop at screen.
        if screen-group1 = 'GP1'.
          screen-input = 1.
          modify screen.
        else.
          screen-input = 0.
          modify screen.
        endif.
        temp_flag = 1.
      endloop.
    endif.
elseif i_aktyp = 'V'.
    loop at screen.
      if screen-group1 = 'GP1'.
        screen-input = 1.
        modify screen.
      else.
        screen-input = 0.
        modify screen.
      endif.
    endloop.
endif.
endmodule.                 " STATUS_0300 OUTPUT
Try to give this logic.
Regards,
Ramya

How to add new field to table control data not displayed

hi
I have added some nwe fields to already existing table control added three new fields...
though the recoreds are inserted in teh table properly with the three new fields user id data and time fields
but on display only the data is not shown in these three columns though the data is coming in internal table...but not to the screen output
pls suggest where the problme may be
nishant

First try the small button Configuration on top right of the table control, as displayed when you run the program. Hit 'Administrator' and see if the fields are checked as invisible. Uncheck them, activate and save.
If the fields are not in that list at all, then check if the table control is initialized for the screen you use. For example
CONTROLS: tc_ent_lines TYPE TABLEVIEW USING SCREEN '0100'.
but you copied your screen and use the same table control in the new screen 0200. Then all you have to do is
REFRESH CONTROL 'TC_ENT_LINES' FROM SCREEN '0200'.
before you show the screen.

Problem related to display column's full length as default in table control

Hi Experts,
I have a screen in report program. In that a table control has been designed.
Now the issue is that when report program has been executed and the table control screen is called on a particular action then the table columns full length is not visible as default however when i checked the screen layout the default and visible length of colum header and column field is as per required.
For example - We have a Period field with default length as 6 and visible length as 15. Its column header is Period with both default length as 15 and visible length as 15.
The period field has an internal table field reference and its format is NUMC.
While column header Period is Text field created of type CHAR.
Please suggest. Any help or inputs will be highly appreciated.
Thanks,
Akash

Hi
set cursor field 'WA_CODFOD-C_NOTE_NO' line mline.
The value of MLINE can be from 1 and N, where N is the number of the lines shown in the table control, so if your table control can display 5 line, MLINE will be from 1 to 5.
Now you need to create the link between the line of the table control and the line of internal table, the rule is:
Internal Table Line = <table control>-TOP_LINE + <table control line> - 1.
Max

Make only the new row in a table editable and other rows display mode.

Hiii all,
I am working on the component GSWISET, there is a table view for substitutes, the requirement is to show all the rows in the table view in display mode. Whenever the user clicks the button (Add employee), a search popup triggers and the user selects an employee from that and it will come as a new row in the table view. Here I need to be able to make only the new row editable and all the other rows in display mode.
Could you please suggest a way to achieve this. Thanks for your time..

Hi,
Try with the code below in.htm page
data: lv_displaymode TYPE string.
IF controller->view_group_context->is_view_in_display_mode( controller ) = abap_true.
 lv_displaymode = 'X'.
ELSE.
 lv_displaymode = ' '.
ENDIF.
if lv_displaymode = 'X'.
<chtmlb:tableExtension tableId = "Substitutes"
 layout = "FIXED" >
<chtmlb:configTable actions = "<%= controller->gt_button %>"
 id = "Substitutes"
 onRowSelection = "select"
 selectedRowIndex = "<%= substitutes->SELECTED_INDEX %>"
 selectedRowIndexTable = "<%= substitutes->SELECTION_TAB %>"
 table = "//Substitutes/Table"
 width = "100%"
 selectionMode = "<%= substitutes->selection_mode %>"
 visibleFirstRow = "<%= substitutes->VISIBLE_FIRST_ROW_INDEX %>"
 usage = "ASSIGNMENTBLOCK"
 headerText = "<%= controller->gv_header_text %>" />
</chtmlb:tableExtension>
else.
<chtmlb:tableExtension tableId = "Substitutes"
 layout = "FIXED" >
<chtmlb:configTable actions = "<%= controller->gt_button %>"
 id = "Substitutes"
 onRowSelection = "select"
 selectedRowIndex = "<%= substitutes->SELECTED_INDEX %>"
 selectedRowIndexTable = "<%= substitutes->SELECTION_TAB %>"
 table = "//Substitutes/Table"
 width = "100%"
 selectionMode = "<%= substitutes->selection_mode %>"
 allRowsEditable = "TRUE"
 visibleFirstRow = "<%= substitutes->VISIBLE_FIRST_ROW_INDEX %>"
 usage = "EDITLIST"
 headerText = "<%= controller->gv_header_text %>" />
</chtmlb:tableExtension>
endif.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Dec 24, 2010 12:49 PM

Make Select rows and columns as read only in Table Control

Hi All,
I would like to know how to make certain cells in a Table Control as display only.
Table control should look like-(Those in bold are read only or in display mode)
Name1 Idno1 Address1
Name2 Idno2 Address2
Name3 Idno3 Address3
Name4 Idno4 Address4
(Blank row to enter name idno and address)
(Blank row to enter name idno and address)
(Blank row to enter name idno and address)
My table control should display all the above fields the way it is above of which first two colums and 4 rows should be read only,and the rest of the empty rows in the TC should be in change mode.i.e it must have provision to add new rows but not change the first two columns of existing rows.
In short I am looking at solution to hide particular no of rows and columns and not the entire column.

In the PBO of the table control loop. just write these statements
NAME and IDNO considering the fields on the screen.
and WA_TAB is the table work area being passed to the table control to display the rows.
if not WA_TAB-NAME is initial and not WA_TAB-IDNO is initial.
loop at screen.
if screen-name = 'NAME' or
 screen-name = 'IDNO'.
screen-input = 0.
modify screen.
endif.
endloop.
endif.
which means that the fields are disabled only if NAME and IDNO are not initial.
Regards
- Gopi

Table control in display mode

Similar Messages

Maybe you are looking for