Table for the enhanced fields

Hi Experts,
i enhanced the the data source 0FI_AP_4 with the four fields BUSAB,MWSKZ,TXJCD,FWSTE
now i need to write code in CMOD to populate these fields in to RSA3, but i dont know from which tables these fields will get populated........
can you please give me the tables from which these fields will get populated
BUSAB - Accounting clerck - Table ?
MWSKZ - Tax code - Table ?
TXJCD - Jurisdiction code - Table ?
FWSTE - Tax amount - Table ?
Thank you

Hi,
You can follow the various approach to identify the table to populate the fields.
1. Use Tcode SE11 and go to where used list to find desired table from the list of table.
2. Use FI trasnsaction code to check FI document in R/3 (If you are not sure which code to be used please take the help of functional consultant) and press F1 -> go to technical help -> and you can find the proper FIELD/TABLE relationship.
Dev

Similar Messages

  • Set up table contains the enhanced field information?

    Hi Experts,
    I am enhancing a field in the datasource 2lis_11_vaitm,
    Things i did :
    1.Enhanced the ext.structure with the required field.
    2.Activated the ext.structure.
    3.Witten the logic in the CMOD.
    4. Deleted the Setup table and refilled.
    Now my question is :
    1.Did the setup table contains the ENHANCED FIELD with the historical data ?if so where to see that?
    I checked in RSA3 the enhanced field is displayed with the records.
    The code i have wriiten is WHEN "DATASOURCE " then -> logic from the base table.
    Now will the data come from the base table or from the setup table?
    Can any one help me in this issue.
    Best Regards
    Jelina

    Why do we need to delete the setup table after doing enchancement with standard Datasource.
    Ans :
    You neednot refill the setup table just because you enhanced the datasource.
    You need to delete and refill if the postings happened after you filled the setup table.
    Meaning you will miss the current posting.Unless you have done a init in BI/BW side.
    Hope this helps.

  • What to know the master table for the following fields

    I want to know the master table for the following fields.
    Company code ( BUKRS )
    Chart of depreciation ( AFAPL)
    Main Asset Number  (ANLN1)
    Asset Sub Number ( ANLN2 )
    Asset Class ( ANLKL )

    hi,
    1) t001 (<b>for assets T093C</b>)
    2) t096
    3 and 4) anla
    5) anka
    rgds Andreas
    Message was edited by:
            Andreas Mann

  • Tables for the following fields

    what are the tables for the fields cartonization,intro month,supply end month,delete month and non-colloboration.All are from MM.

    hI,
    Go to table DD03T.
    See the Contents of the Table(CtrlShiftF10)
    In DDTEXT give Your Field Description
    Like totalAmount*
    Then Press F8.
    You will get all the fields related to it.
    Regards
    Sandipan

  • Update EKKO table for the custom field through BAPI

    Hi Experts,
    I need to create an Custom field in EKKO table through Include Structure.
    Now I have to update that custom field in my program.
    I have gone through the following but could not solve my question.
    Update EKKO table
    User Exit for ME21 PO Creation at the time of saving--Urgent
    I don't need to update when I hit the save button or any thing
    I have the PO's which needs to be updated with that field...
    Any suggestions would be greatly helpful.
    Thanks,
    Chaithanya...
    <removed_by_moderator>
    Edited by: Julius Bussche on Jul 7, 2008 10:47 PM

    Hi Patrick,
    Sorry Patrick you are right.. The structure is at header level.
    I have made the changes still I could not achieve it.
    I have made the following
    In EKKO table I have append the structure with a custom field ZZBUY.
    Now I have also appended BAPI_TE_MEPOHEADER and BAPI_TE_MEPOHEADERX with the custom field
    ZZBUY.
    Here is my program
    Data: wa_bapi_poheader  type BAPIMEPOHEADER,
             wa_bapi_poheaderx type BAPIMEPOHEADERX.
    Data: it1_bapi_poheader  like BAPI_TE_MEPOHEADER,
             it1_bapi_poheaderx like BAPI_TE_MEPOHEADERX.
    CALL FUNCTION 'BAPI_PO_GETDETAIL1'
      EXPORTING
        PURCHASEORDER            = wa_DATA-ebeln
    *   ACCOUNT_ASSIGNMENT       = ' '
    *   ITEM_TEXT                = ' '
    *   HEADER_TEXT              = ' '
    *   DELIVERY_ADDRESS         = ' '
    *   VERSION                  = ' '
    *   SERVICES                 = ' '
      IMPORTING
        POHEADER                 = wa_bapi_poheader
    *    POEXPIMPHEADER           =
      TABLES
        RETURN                   = it_bapireturn
    it1_bapi_poheader-ZZBUY = 'X'.
    it1_bapi_poheaderx-ZZBUY = 'X'.
    it_extensionin-structure = 'BAPI_TE_MEPOHEADER'.
    it_extensionin-valuepart1 = it1_bapi_poheader.
    append it_extensionin.
    Clear  it_extensionin.
    it_extensionin-structure = 'BAPI_TE_MEPOHEADERX'.
    it_extensionin-valuepart1 = it1_bapi_poheaderx.
    append it_extensionin.
    Clear  it_extensionin.
       CALL FUNCTION 'BAPI_PO_CHANGE'
         EXPORTING
           PURCHASEORDER                = wa_data-ebeln
           POHEADER                     = wa_bapi_poheader
           POHEADERX                    = wa_bapi_poheaderx
    *      POADDRVENDOR                 =
    *      TESTRUN                      =
    *      MEMORY_UNCOMPLETE            =
    *      MEMORY_COMPLETE              =
    *      POEXPIMPHEADER               =
    *      POEXPIMPHEADERX              =
    *      VERSIONS                     =
    *      NO_MESSAGING                 =
    *      NO_MESSAGE_REQ               =
    *      NO_AUTHORITY                 =
    *      NO_PRICE_FROM_PO             =
    *    IMPORTING
    *      EXPHEADER                    =
    *      EXPPOEXPIMPHEADER            =
         TABLES
           RETURN                       = it_bapireturn
    *      POITEM                       =
    *      POITEMX                      =
    *      POADDRDELIVERY               =
    *      POSCHEDULE                   =
    *      POSCHEDULEX                  =
    *      POACCOUNT                    =
    *      POACCOUNTPROFITSEGMENT       =
    *      POACCOUNTX                   =
    *      POCONDHEADER                 =
    *      POCONDHEADERX                =
    *      POCOND                       =
    *      POCONDX                      =
    *      POLIMITS                     =
    *      POCONTRACTLIMITS             =
    *      POSERVICES                   =
    *      POSRVACCESSVALUES            =
    *      POSERVICESTEXT               =
           EXTENSIONIN                  = it_extensionin
    *      EXTENSIONOUT                 =
    *      POEXPIMPITEM                 =
    *      POEXPIMPITEMX                =
    *      POTEXTHEADER                 =
    *      POTEXTITEM                   =
    *      ALLVERSIONS                  =
    *      POPARTNER                    =
    *      POCOMPONENTS                 =
    *      POCOMPONENTSX                =
    *      POSHIPPING                   =
    *      POSHIPPINGX                  =
    *      POSHIPPINGEXP                =
    *      POHISTORY                    =
    *      POHISTORY_TOTALS             =
    *      POCONFIRMATION               =
    It gives me messages saying that
    Please also populate interface parameter POHEADERX
    No data changed
    Where am I going wrong..
    Waiting for your replies....
    Thanks,
    Chaitanya

  • Reg: Loading historic data for the enhanced field

    Hello All,
    We need to add a new field 0VENDOR to our datasource 0FI_GL_4. This field is available in our BSEG table. Hence, we are planning to go ahead with datasource enhancement.
    Now, please advice on how to update the historical data to this newly added field.I have heard there is a BW functionality/program to do so without deleting the entire data. Kindly advice on the possible solutions.
    Thanks & Regards
    Sneha Santhanakrishnan

    HI Sneha,
    Using remodeling option you will be able to do that, ie.. loading historical data for new attributes without deleting existing data. But the problem is in remodeling either you can assign constant or some other attribute value or values determined using EXIT.
    Now when you are loading data from source system and if you need historical data as well the best practise is delete existing data and reload it from source sytsem.
    But if you don't want to do that then I can give you one trick but not sure whether it will work or not. The idea is to populate the historical values for 0Vendor using customer exit option of remodeling. Now to get the historical values in customer exit you will need all that data in some BW table, here you can think of creating some generic extractor which will store the values of all the documents and the respective vendor, as you will load data form source system you will get historical values as well.
    Now read that table in customer exit and populate vendor value. This will be one time process to populate the historical values.
    Regards,
    Durgesh.

  • Required Table for the following fields.

    Hi All,
    I am searching for a table which containing the following all fields can anybody help me if you know
    Cost centre: KOSTL,
    Activity Type: LSTAR
    Fixed Activity Price in the transaction KP27.

    Cost centre: KOSTL,  table is CSKS
    Activity Type: LSTAR table is  CSLA,
    further if u want
    se11->datatype-> enter ur field name -> click where used list button (3rdbutton from left)-> check table fields-> press enter...
    Ramesh.

  • R/3 tables for the fields of  0fi_gl_40

    How to find the r/3 tables for the fields of the datasource 0FI_GL_40.For example this datasource has ANLN1(Asset),ANLN2(Asset Subnumber) and AUFNR(Order)
    fields.Is there any tcode or table that gives the r/3 tables for the the fields of the above datasource?

    Sometimes the help really does provide the information
    http://help.sap.com/saphelp_nw70/helpdata/EN/88/3c36861f874739a916df63ab6d7ca0/content.htm

  • Field name and table name for the value field

    hi,
        i requred the  value field  for  which the quantity that is not delivered in purchase order, so please tell  me which field i have to go for the value field.
    thanks and regards.

    Hi,
    There is no direct field to get the PO Open qty(undelivered Qty).
    Take the PO quantity for each Item from EKPO-MENGE.
    For each PO Item there will be multiple GR(good's receipts) 's in MSEG table.
    So pass EBELN and EBELP for MSEG table and Take all the GR Quantities(ERFMG) field and sum up .(have to take care of the Movement type also, becasue there will be some returns and GI's).
    Substract the GR qty from PO qty you will get the UNDELIVERED QTY of A PO.
    Regards,
    Anji

  • Master table for the field BSART

    hi friends
    pls tell me, which is the master table for the field BSART.
    because i want to get the search help fo that field....

    Hi babu,
    If u want know what the table and where the fields are resued go to T-code SE15. u can find ...
    Regards,
    Bharani.

  • Displaying no default zeroes for the numeric field in the table display.

    hi folks,
         I am binding a table in the context which has some numeric fields. I'm  displaying the same table which has some records for editing purpose. But the problem is that the numeric  field column is being displayed with zeros if it doesnot have any value in it. Can u explain how to disable the zeroes by not displaying them by defualt when there is no value for the numeric field.
    regards,
    Ramu

    set the format of the context attribute TEST is the context attribute name
    data: lr_info type ref to if_wd_context_node_info.
    data: ls_prop type WDY_ATTRIBUTE_FORMAT_PROP.
    lr_info = wd_context->get_node_info( ).
    ls_prop = lr_info->GET_ATTRIBUTE_FORMAT_PROPS( name = 'TEST' ).
    LS_PROP-NULL_AS_BLANK = 'X'.
    lr_info->sET_ATTRIBUTE_FORMAT_PROPS( name = 'TEST'
                 FORMAT_PROPERTIES = ls_prop ).
    Abhi

  • I am creating a request for proposal form and I need to add a commission structure field.  I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

      I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

    It sounds like what you are trying to do is edit the choices in a likert field to something other than the default radio button. This is not something that you can do in Formscentral at this time.
    Andrew

  • Deltas are not capturing for the enchanced field

    Hi Friends,
    We have enchanced 2LIS_11_VAITM datasource with custom field called customer requested date.
    For initial setup i can see the data for this field in BI. But when user changes the customer requested date then this is capturing in deltas.
    can any one know the reason behind this.
    But when i run set tables for the particula Sales document number i can see the data for this field.
    <removed by moderator>.
    Best Regards,
    Reddy.
    Edited by: Siegfried Szameitat on Dec 23, 2008 4:38 PM

    Hi,
    when u replicated those fields are appering in bw side? if not by default the enhanced fields in hide condition for that fields data will not come ,if it is the case go to the RSA6 and select ur datasource and go to the change mode and deselect the hide check box in extraction structure of datasource and do the activation and do the replication in bw side
    if the fields are came in bw side then u check in transferstructure either the fields assigned to correct infoobjects or not then check the update rules either those fields assignd or not.
    Thanks & regards
    k.sathish

  • How to find out the description for the given field?

    Hi All,
    How to find out the description for the given field?
    I mean ETTYP  Desription is VTEXT. This we can find in TVEPT  Table. So, How canwe find this?
    Thanks in Advance
    Sri...

    Hi  Avi,
    If i want to disply the  fields like   AUART and 'Description of AUART',
    Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
    my question is if i have given T184-AUART  and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
    Thanks in Advance
    Sri...

  • F4 help for the screen fields in module pool program

    Hi All,
      I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
    i could provide search help for two fields.
    but how to select matching fiscal year for that document number.
    problem: i am getting fiscal year as first four digits of document number.
    please help me to solve this problem.
    Thanks & Regards,
    Namratha.V

    Hi,
       If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
    In  this function module pass the screen no program & field for which u want to update value

Maybe you are looking for