Table / Function that defines if a program is being executed(not-so-urgent)

Hi,
Could you please help me.
I required to know if a program is being executed in a specific moment.
If you know any table or a function, than indicates if a program is being executed in that moment please tell me.
I search for a function and found this one, but i dont know how to use it.
CALL FUNCTION 'ENQUEUE_ESFUNCTION'
EXPORTING
 MODE_TFDIR = 'E'
 FUNCNAME =
 X_FUNCNAME = ' '
 _SCOPE = '2'
 _WAIT = ' '
 _COLLECT = ' '
EXCEPTIONS
 FOREIGN_LOCK = 1
 SYSTEM_FAILURE = 2
 OTHERS = 3
Please help me !!!!!.
Thanks for your help and best regards.
JRZ.
<Subject line changed>
Edited by: Suhas Saha on Oct 28, 2011 10:37 AM

Hi,
You can use transaction code STAT
writer/painter reports -view stats via SE16 in table T803J
reports and transactions execution info is stored in table MONI.
Also check this sample code from other thread.
internal tables for use counterdata:
begin of list occurs 5.
include structure sapwlserv.
data: end of list.
data: begin of applicat occurs 0.
include structure sapwlustcx.
data: end of applicat.
data: begin of applica_ occurs 0.
include structure sapwlustcx.
data: end of applica_.
data: begin of applicau occurs 0,
entry_id like sapwlustcx-entry_id,
account like sapwlustcx-account,
count like sapwlustcx-count,
: end of applicau.
data: wa_applicau like applicau.
*& Form MONI
form moni.
data: l_host like sapwlserv-hostshort.
m_start = p_usedt.
get server
call function 'SAPWL_SERVLIST_GET_LIST'
tables
list = list.
do.
loop at list.
loop on server
check not list-instshort is initial.
l_host = list-instshort.
get statistics per month and server
perform workload using m_start l_host.
endloop.
add 31 to m_start.
if m_start > sy-datum.
exit.
endif.
enddo.
sort applica_ by entry_id.
sort applicau by entry_id count descending.
endform. " MONI
*& Form WORKLOAD
form workload using p_start like sy-datum
p_host like sapwlserv-hostshort.
refresh: applica_.
read application statistic from MONI
call function 'SAPWL_WORKLOAD_GET_STATISTIC'
exporting
periodtype = 'M'
hostid = p_host
startdate = p_start
only_application_statistic = 'X'
tables
application_statistic = applica_
exceptions
unknown_periodtype = 1
no_data_found = 2
others = 3.
sort applica_ by entry_id account.
loop at applica_ where entry_id(1) ge 'Y'. "#EC PORTABLE
clear wa_applicau-entry_id.
wa_applicau-entry_id(25) = applica_-entry_id.
wa_applicau-account = applica_-account.
wa_applicau-count = applica_-count.
collect wa_applicau into applicau.
endloop.
sort applicau by entry_id count descending.
applica_-ttype = space.
applica_-account = space.
modify applica_ transporting ttype account where ttype ne space.
collect only enhancements statistic
if p_temp = 'X'.
loop at applica_.
applica_-entry_id+25(48) = space.
collect applica_ into applicat.
endloop.
else.
loop at applica_ where entry_id(1) ge 'Y'. "#EC PORTABLE
applica_-entry_id+25(48) = space.
collect applica_ into applicat.
endloop.
endif.
endform. " WORKLOAD
Thanks & regards.

Similar Messages

Sql table function that compares two tables column structure and returns each difference as a record in the returned table

hi,
Does anyone have or can show me the principle of a such kind of function ?

see
http://geekswithblogs.net/leonardm/archive/2010/01/14/table-schema-comparison-in-sql-server.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to get information of 'include file', 'table', 'function' from the prog

Hi all.
I wanna know which 'include file', 'table', 'function' is used in the program.
Firstly, I prepared user interface for entering the name of program.
Secondarly,
I made the way to confirm whether the program is exising or not by using TADIR.
And I must use CROSS for getting information of function.
But at the same time, I will use 'RS_GET_ALL_INCLUDES', 'RS_GET_TABLE_REFERENCES' for getting information of include file or table.
After that, I have to report by using ALV.
Then, I will use both of string getting from function by using above function and internal table getting from CROSS.
How do I put together in INTERNAL TABLE.

hi,
look F1 to abap command scan and read report
A.

Duplicate Rows In Oracle Pipelined Table Functions

Hi fellow oracle users,
I am trying to create an Oracle piplined table function that contains duplicate records. Whenever I try to pipe the same record twice, the duplicate record does not show up in the resulting pipelined table.
Here's a sample piece of SQL:
/* Type declarations */
TYPE MY_RECORD IS RECORD(
MY_NUM INTEGER
TYPE MY_TABLE IS TABLE OF MY_RECORD;
/* Pipelined function declaration */
FUNCTION MY_FUNCTION RETURN MY_TABLE PIPELINED IS
V_RECORD MY_RECORD;
BEGIN
-- insert first record
V_RECORD.MY_NUM = 1;
PIPE ROW (V_RECORD);
-- insert second duplicate record
V_RECORD.MY_NUM = 1;
PIPE ROW (V_RECORD);
-- return piplined table
RETURN;
END;
/* Statement to query pipelined function */
SELECT * FROM TABLE( MY_FUNCTION ); -- for some reason this only returns one record instead of two
I am trying to get the duplicate row to show up in the select statement. Any help would be greatly appreciated.

Can you provide actual output from an SQL*Plus prompt trying this? I don't see the same behavior
SQL> SELECT * FROM V$VERSION;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> CREATE TYPE MY_RECORD IS OBJECT(MY_NUM INTEGER);
2 /
Type created.
SQL> CREATE TYPE MY_TABLE IS TABLE OF MY_RECORD;
2 /
Type created.
SQL> CREATE OR REPLACE FUNCTION MY_FUNCTION
2 RETURN MY_TABLE
3 PIPELINED
4          AS
5                  V_RECORD        MY_RECORD;
6          BEGIN
7                  V_RECORD.MY_NUM := 1;
8                  PIPE ROW(V_RECORD);
9
10                  V_RECORD.MY_NUM := 1;
11                  PIPE ROW(V_RECORD);
12
13                  RETURN;
14          END;
15 /
Function created.
SQL> SELECT * FROM TABLE(MY_FUNCTION);
              MY_NUM
                   1
                   1

Table Functions, Direct Database Requests, and NUMBER data types

Hello. I call a number of table functions from our BI Enterprise server, and I've elected to do so using Direct Database Requests (I believe you can also call table functions in the physical layer of the repository, but that's not what I'm doing). The problem is that whenever I return any number from the table function that is not a whole number (1.23, for example), BI assigns the INTEGER datatype to the field instead of the DOUBLE datatype, thereby rounding my number to the nearest integer. Here's a concise example:
Create these 3 database objects:
CREATE OR REPLACE TYPE my_row AS OBJECT (my_num NUMBER);
CREATE OR REPLACE TYPE my_tab AS TABLE OF my_row;
CREATE OR REPLACE FUNCTION my_table_function RETURN my_tab
PIPELINED IS
BEGIN
PIPE ROW(my_row(1.23));
END;
Then make this your query in your Direct Database Request:
SELECT my_num FROM table(my_table_function);
That query correctly returns "1.23" when it's called from the database. In BI, on the other hand, it returns "1" (and labels the field an INTEGER instead of DOUBLE data type). If in the Direct Database Request you change the Column Properties ->Data Format -> Decimal Places from 0 to 2, it then not surprisingly displays "1.00". I then tried changing MY_ROW.MY_NUM's datatype by explicitly specifying precision, and no luck. BI still labels this field as an INTEGER. Then I started trying to trick BI by massaging the SQL statement itself. None of the following worked:
SELECT to_number(my_num) as my_num2 FROM table(my_table_function);
SELECT my_num2 + 0.01 as my_num3 FROM (SELECT my_num - 0.01 AS my_num2 FROM table(my_table_function));
SELECT to_number(to_char(my_num)) as my_num2 FROM table(my_table_function);
SELECT to_number(substr(to_char('x'||my_num),2)) as my_num2 FROM table(my_table_function);
Now I did find a solution, but I'm surprised that I have to resort to this:
SELECT * FROM (SELECT /*+ NO_MERGE */ my_num FROM table(my_table_function));
Does anyone out there know of a better way to do this? The above is a hack in my opinion. :)
Thanks in advance for any input.
-Jim

Yes, it's really amazing.
But I got it.
CREATE OR REPLACE TYPE my_row AS OBJECT (my_num NUMBER(10,2));and in your SQL :
SELECT cast(my_num as double precision) as my_num2 FROM table(my_table_function);I have the good result and I see the numbers after the comma.
Very tricky !
Edited by: gerardnico on Jul 7, 2009 2:55 PM change number(10,2) by double precision ......... pfffff

How to find out when a program was last executed

Hello,
I have a assignment to find out when some programs where last executed in the past 2 years or so. My question to the profs here is as follows? What are the possibilities in ABAP to out when a Program (report) was last executed? Is there a function Modul that can give you when a program was last executed? OR is there a table to show you when a program was last executed?
Thank you for your help.
Sabina

Hi,
use the t.code STAT,STAD.
Check in this link for a sample code..
https://forums.sdn.sap.com/click.jspa?searchID=421554&messageID=1488089.
From Table TRDIR also you get the information about Last change.
TRDIR-UDAT ---> Changed On
TRDIR-UNAM ---> User Name
Regards
Kiran Sure

How to use the Table Function defined in package in OWB?

Hi,
I defined a table function in a package. I am trying to use that in owb using Table function operator. But I came to know that, owb R1 supports only standalone table functions.
Is there any other way to use the table function defined in a package. As like we create synonyms for functions, is there any other way to do this.
I tryed to create synonyms, it is created. But it is showing compilation error. Finally I found that, we can't create synonyms for functions which are defined in packages.
Any one can explain it, how to resolve this problem.
Thank you,
Regards
Gowtham Sen.

Hi Marcos,
Thank you for reply.
OWB R1 supports stand alone table functions. Here what I mean is, the table fucntion which is not inculded in any package is a stand alone table function.
for example say sample_tbl_fn is a table function. It is defined as a function.It is a stand alone function. We call this fucntion as "samp_tbl_fn()";
For exampe say sample_pkg is a package. say a function is defined in a package.
then we call that function as sample_pkg.functionname(); This is not a stand alone function.
I hope you understand it.
owb supports stand alone functions.
Here I would like to know, is there any other way to use the functions which are defined in package. While I am trying to use those functions (which are defined in package -- giving the name as packagename.functionname) it is throwing an error "Invalid object name."
Here I would like know, is there any other way to use the table functions which are defined in a package.
Thank you,
Regards,
Gowtham Sen.

How to call c functions that expects c structs from java program?

i need to call from my java program to c functions that get
c structs as a parameters in their prototype.
as you probablly know java is not working with structs (classes only), so my question is how can i do it , i mean call the c functions that gets structs as parameters form java????

i believe your c function can accept a jobject and then inside your c function you have to translate that jobject into a c struct by using the jni methods.
the only reason your c function cant accept structs from java is because java does not have such structures. your c function can accept any data type that has been defined and a jobject has been defined.
if you have no control over the c functions that are being called, you need to write a wrapper function for those c function. the wrapper functions do the translation from jobject to a struct...then call the c other c functions.

How to define a view on a table function

I have a defined a pipelined table function in a package and can return data from it using:
select * from table(mtreport.FN_GET_JOBS_FOR_PROJECT(?));How can I define a view on this so that users can select from it without having to know to use the 'table' syntax?
select *
from vw_jobs_for_project
where id = ?I've tried this, but it doesn't work
CREATE OR REPLACE VIEW vw_jobs_for_project (PROJECT_ID, NAME) AS
SELECT PROJECT_ID, NAME
FROM table(mtreport.FN_GET_JOBS_FOR_PROJECT(PROJECT_ID));
ERROR at line 3:
ORA-00904: "PROJECT_ID": invalid identifier

views do not accept input parameters in the way that you want to use. you can define a CONTEXT parameter, but the users would need to set the context value before selecting from the view, so you'll still need to train them to do something new.
example:
create or replace context my_context using pkg_context;
 
create or replace package pkg_context is
procedure set_context(p_parameter in varchar2, p_value in varchar2);
function get_context(p_parameter in varchar2) return varchar2;
end;
show errors
create or replace package body pkg_context is
CONTEXT_NAME constant all_context.namespace%type := 'MY_CONTEXT';
procedure set_context(p_parameter in varchar2, p_value in varchar2) is
begin
 dbms_session.set_context(CONTEXT_NAME, p_parameter, p_value);
end;
function get_context(p_parameter in varchar2) return varchar2 is
begin
 return sys_context(CONTEXT_NAME, p_parameter);
end;
end;
show errors
create or replace view tree_view as
select level lvl, chid
from tree
connect by prior parid=chid
start with chid = sys_context('MY_CONTEXT','CHID');
-- at runtime
exec pkg_context.set_context('CHID', 14)
select * from tree_view;

How to define a function that returns a void?

Hi all,
How can I define a custom function that returns a void?
My understanding is simple UDF can only return a string.
Is there any way around this limitation?
Thanks.
Ron

> Hi,
> User Defined Function in XI always return a String.
>
> If you requirement is that you want to perfrom some
> operation in an user defined function, one option is
> to move it to the Java Section in your mapping and do
> it in the intialization / clean up section.
>
> Else, wite a UDF that will return a Blank string as
> the output, and map it to the root node of the
> target.
>
Hi all,
Thank you all for your kind responses.
The scenario I have is I need to insert the value of a particular field into a database table. E.g. MessageId, to keep track of the messages going through XI.
Naturally, such operations return void. These operations are already encapsulated in a custom jar file.
My purpose of using a UDF is solely to invoke the operation.
But I realized I each UDF has to have a return type, and the output of this UDF must be mapped to a node in the outgoing message.
Currently, my UDF returns an empty string, by using the implementation as below, I manage to perform my desired operation without affecting the result:
MessageId -- UDF -- CONCAT -
InstitutionCD_Transformed
InstitutionCode_____
But as you can see, this is not an elegant way of doing things.
That's why I'm seeking alternative solutions for this problem.
Bhavesh, you mentioned something about doing the operation in the initialization/cleanup section.
Can you please explain more?
Thanks.
Ron

How to create a function that returns multiple rows in table

Dear all,
I want to create a funtion that returns multiple rows from the table (ex: gl_balances). I done following:
-- Create type (successfull)
Create or replace type tp_gl_balance as Object
PERIOD_NAME VARCHAR2(15),
CURRENCY_CODE VARCHAR2(15),
PERIOD_TYPE VARCHAR2(15),
PERIOD_YEAR NUMBER(15),
BEGIN_BALANCE_DR NUMBER,
BEGIN_BALANCE_CR NUMBER
-- successfull
create type tp_tbl_gl_balance as table of tp_gl_balance;
but i create a function for return some rows from gl_balances, i can't compile it
create or replace function f_gl_balance(p_period varchar2) return tp_tbl_gl_balance pipelined
as
begin
return
(select gb.period_name, gb.currency_code, gb.period_type, gb.period_year, gb.begin_balance_dr, gb.begin_balance_cr
from gl_balances gb
where gb.period_name = p_period);
end;
I also try
create or replace function f_gl_balance(p_period varchar2) return tp_tbl_gl_balance pipelined
as
begin
select gb.period_name, gb.currency_code, gb.period_type, gb.period_year, gb.begin_balance_dr, gb.begin_balance_cr
from gl_balances gb
where gb.period_name = p_period;
return;
end;
Please help me solve this function.
thanks and best reguard

hi,
Use TABLE FUNCTIONS,
[http://www.oracle-base.com/articles/9i/PipelinedTableFunctions9i.php]
Regards,
Danish

In the program pages there is a function that automatically will save may document not only one i click save

in the program pages there is a function that automatically will save may document not only one i click save

In Lion and Mountain Lion you must save the first time then it will autosave for you with versions.
ForEverSave, a 3rd party application, might actually prompt you after a set period. Check it out and any alternatives.
Peter

Memory leak in JCO when calling an ABAP-function that returns larg tables

Hello everybody,
I think discovered a memory leak in JCO when the calling functionions that have exporting tables with large datasets. For example the ABAP-function RFC_READ_TABLE, which in this example I use to retrieve data from a table called "RSZELTTXT", which contains ~ 120000 datasets. RFC_READ_TABLE exports the data as table "DATA".
Here a simple JUnit test:
http://pastebin.ca/1420451
When running it with Sun Java 1.6 with standard heap size of 64mb I get a heapsize OutOfMemory error:
http://pastebin.ca/1420472
Looking at the heap dump (which I unfortunately cannot post here, because of it' size), I can see that I've 65000 char[512] array objects in my heap, which don't get cleaned up. I think, each char[512] array stands for one dataset in the exporting table "DATA", since the table contains 120000 datasets, the heap is full after the first 65000 datasets are parsed. Apparently, JCO tries to read all datasets in memory instead of justing reading the dataset to which the pointer (JCoTable.setRow(i)) currently points to and releasing it from memory after the pointer moves forward ...
Did anybody else experience this?
Is SAP going to remove to issue in upcoming versions of JCO?
regards Samir

Hi,
Check Below links
1) How To Analyze Performance Problems JCO
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3fbea790-0201-0010-6481-8370ebc3c17d
2) How to Avoid Memory Leaks
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c3e598fe-0601-0010-e990-b8622840c8c2
Salil...
Edited by: salil chavan on Jun 2, 2009 5:21 AM

Function module/BAPI or standerd program to define Transport route

Hi All,
I am configuring the TMS configuration through ABAP program .
I am able to configure Domain controller, and able add system to it.
Now I am not able to define Transport route, Can anybody tell me how can I achive this?
Is there any function module/BAPI or standerd program for it?
Thanks,
Swarup

Hello
To check the BAPIS to related module go to swo1 tcode.
Thank u,
santhosh

I want to save with alt s in the program Exact Online. This function is not working. this is the first time that i use this program with firefox.

Question
I want to save with <nowiki><alt><s></nowiki> in the program Exact Online. This function is not working. this is the first time that i use this program with firefox.
'''edit''', mod escaped the '''<nowiki><s></nowiki>''' to prevent line through question

Submitted too soon... To change your accelerator key for accesskeys to Alt alone (or a different combination), you can change a setting using Firefox's about:config preferences page.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''ui.k''' and pause while the list is filtered
(3) Make sure '''ui.key.generalAccessKey''' is set to its default value of -1 (or right-click and choose Reset if it is not).
(4) Double-click '''ui.key.contentAccess''' to open a dialog box to change the value from its current default (on Windows, 5) to your choice of the following:
* 2 = '''Ctrl''' (Fx default on Mac thru Fx13)
* 3 = Ctrl + Shift
* 4 = '''Alt''' (IE/Chrome/Safari default on Win/Linux)
* 5 = '''Alt + Shift''' (Fx default on Windows & Linux)
* 6 = '''Ctrl + Alt''' (Fx default on Mac from Fx14) (Chrome/Safari default on Mac)
* 7 = Ctrl + Alt + Shift
This should take effect as soon as you OK the dialog, so you can experiment in a separate tab. Other combinations are available if you want to try them. See http://kb.mozillazine.org/Ui.key.contentAccess (inaccessible at the moment?)

Table / Function that defines if a program is being executed(not-so-urgent)

Similar Messages

Maybe you are looking for