Table in PI JAVA only system & Report development in JAVA only system

Dear Experts ,
We are migrating from Dual to Single stack JAVA only PI system.
In Dual stack system all the message data are stored in ABAP table from which MONI pulls data .
But in JAVA only system how data is stored ..? and how to access those table ..?
we need a report to develop which will have these data .
Interface name
Date & time of run
Key Data (if possible would like to see key data from the run, for example po number, material number, part number, idoc number would all be considered key data)
Pass/Fail flag
Error Message (only required if the run failed)
How & where to write code to develop this report ...?
thanks
Shakif

Hi Shakif,
Look at this link:
Message details and AuditLog from Java Stack using Custom WebService
and this link about the Java Data Browser:
Open SQL Data Browser - Process Integration - SCN Wiki
Best Regards
Harald

Similar Messages

  • Oracle reports developer 11g java.lang.NoClassDefFoundError oracle/xml/parser/v2/XMLParserException

    Hi All,
    Need expertise help to resolve the issue I am getting with Oracle Report builder.
    I have installed and configured Oracle Forms and Reports Builder 11g  on my Windows 7 & 64 bit machine.
    Oracle Forms are working fine and I am getting an error while I am launching the Oracle Report Builder.
    It says
    The error is;
    java.lang.NoClassDefFoundError:
    oracle/xml/parser/v2/XMLParserException
    once I close th eabove error window, then it says java.lang.NullPOinterException.
    I have done all modifications to Middleware\as_1\bin rwbuilder.bat file as below
    @echo off
    @echo INFO: The Reports Builder is only supported on the Linux x86 and Windows x86 operating systems, for further information, please refer to the Release Notes ...
    @echo Starting Reports 11g Builder...
    setlocal
    call C:\Oracle\Middleware\asinst_1\config\reports\bin\reports.bat
    @echo on
    start C:\Oracle\Middleware\as_1\bin\rwbuilder.exe %*
    @echo off
    endlocal
    :end
    @echo on
    But report builder is not working. (Error comes when launching the Report Builder ).
    Quick support is highly appreciated.
    Thanks
    Muditha

    Hi All,
    Need expertise help to resolve the issue I am getting with Oracle Report builder.
    I have installed and configured Oracle Forms and Reports Builder 11g  on my Windows 7 & 64 bit machine.
    Oracle Forms are working fine and I am getting an error while I am launching the Oracle Report Builder.
    It says
    The error is;
    java.lang.NoClassDefFoundError:
    oracle/xml/parser/v2/XMLParserException
    once I close th eabove error window, then it says java.lang.NullPOinterException.
    I have done all modifications to Middleware\as_1\bin rwbuilder.bat file as below
    @echo off
    @echo INFO: The Reports Builder is only supported on the Linux x86 and Windows x86 operating systems, for further information, please refer to the Release Notes ...
    @echo Starting Reports 11g Builder...
    setlocal
    call C:\Oracle\Middleware\asinst_1\config\reports\bin\reports.bat
    @echo on
    start C:\Oracle\Middleware\as_1\bin\rwbuilder.exe %*
    @echo off
    endlocal
    :end
    @echo on
    But report builder is not working. (Error comes when launching the Report Builder ).
    Quick support is highly appreciated.
    Thanks
    Muditha

  • Project system Report Developement

    To,
    Dear Colleagues,
    I have a requriement to develop a new report for Project system. Apart from Table PRPS,BSEG,MSEG Please let me know the table and logic to pick up the fileds and displayed in the report
    The requirement is as follows
    Month   WBS Element no  Budget uploaded   Budget utilized  Balance  G/L Code   Vendor code   Amount
    These are the coloum heading, out of this  Balance= Budget uploaded-Budget utilized.
    I need table name, process logic, and some helpful hint so that the performance will be optimum.
    Thanks and Regards
    yogi

    It is possible to write such a report.
    Get a good ABAPer to fulfill your requirements.
    There is a very good article in the SCN Sheetal Deshmukh which gives all the table details. Look that up

  • Support Message from satelite system: Reported By field blank only from BI

    Hi,
    I have configured the Incident Management for solman 7.1 with SP12. I am using the transaction type ZMIN that is a copy of SMIN.
    In our landscape are two satelite systems: BI and ECC
    When I create a message from managed/satellite system via HELP>Create Support Message, it comes to Solman the field "Reported By" is not filled automatically if I created the message from BI. The Creation from ECC works fine: the field "Reported By" is filled automatically.
    The system data is fetched up correctly and it includes the system info, component code and all details. Even the Support Team Determination with BRF+ is working fine.
    Not successful actions to solve the problem:
    - I tried some access sequences in Partner Determination for "Reported By":
         - Preceeding Document -> Reporter -> Current User
         - User
    - Checked IB52
    - Checked DNO_CUST04
         No_User_CHECK; No Existence Check for User; field value:X
    - Checked BP (Generated with BP_GEN):
         identification in BP seems correct (I added created/expiry date manually)
    - Checked BCOS_CUST.
    - Checked Read RFC.
    Has someone an idea what the problem could be?
    Thank You for your effort in advance,
    Beda

    Hi,
    1) Under identification tab in external BP no. put details as
    <Server short name>space<client>space<search term
    (which you have maintained in address tab or employee no.
    of that user in satellite system)>
    2) In ID type put CRM001
    3) Under identification put details as <Server short
    name>space<installation no.>space<client>space<search
    term (which you have maintained in address tab or
    employee no. of that user in satellite system)>
    4)Go to trns. BP>select BP role as "Employee"> Indentification tab--> Maintain user name same as user id of employee in satellite system or serch term you maintained while creating BP.
    Try this. Reward the points for useful answer.
    Regards,
    Niks

  • Oracle 6i forms/reports developer client software

    hi all,
    i want the clinet software for oracle 6i forms/reports developer which is only installed on the client system..
    plz tell me the website/address from where i can download it...
    thanx in advance,
    Regards,
    shahzad

    [http://www.oracle.com/technology/software/products/forms/index.html]

  • Need to find the table of RV45A-ETDAT for Report Development

    Hi Everyone,
    I need to bring a field on a custom report - 'First Date' in the Sales Order at item level.
    It is populated with a structure RV45A and the field is ETDAT.
    Apparrently this field is not directly stored in the sales order related database table like VBAP.
    Kindly advise on how to find 'from where to pick this field value' for a custom report development.
    Thank you very much for your help.
    Hemant

    Hi,
    The field ETDAT field is not stored in any SAP Table.
    Probably the field ETDAT in your structure RV45A is populated with data at runtime and that data might be reassigned to some other field.
    You can check the same only in debugging the standard code of that transaction.
    Reward if helpful.
    Warm Regards
    R Adarsh

  • Store z-table (during an report execution) in a BW system

    Is there a way (and how- an example) to store z-table (during an report execution) in a BW system. We would not like Ztables to reside in R/3
    Thank you in advance

    Is there a way (and how- an example) to store z-table (during an report execution) in a BW system. We would not like Ztables to reside in R/3
    Thank you in advance

  • The system variables in java, NEEDED ONLY at CLI execution of java programs

    The system variables in java, NEEDED ONLY at CLI execution of java programs, and NOT needed at all[essentially] if I install bundle(14+6.7)?
    if I install bundle(14+6.7) to run-test a web app with netbeans 6.7 what I must press, then opens the default browser? I have to be online,...? How I test browse my project?

    Probably a complete tutorial on all possible environment variables in addition to a tutorial on netbeans configuration.

  • Crystal Reports Developer Edition XML or Java data source

    <p>Is there a way to use XML or custom Java objects (POJO) data source  in Crystal Reports Developer Edition ?  Currently Crystal Reports  is being invoked as API from an existing code. But that code can be modified if need be.</p>

    Hello Jayashree,
    please see a sample for CR 08 with XML as datasource [here|https://smpdl.sap-ag.de/~sapidp/012002523100006016532008E/XML_datasource.zip].
    Best regards
    Falk

  • Oracle Reports Developer 6i - sample data tables

    I downloaded and installed all the components of Oracle Reports 6i on my PC. When I look at the Oracle Reports Developer manual (building reports.pdf) it is referring to a database tables like stocks, stock_history etc. I am trying to learn how to use the tool using this manual. Aren't the sql scripts that create those tables and load the sample data a part of the installation. Am I missing anything. I will appreciate any input. Again, I did a full install by selecting all the components and not just a typical install.
    Thanks in advance.

    Hi Suresh
    Try locating these tables in scott schema. If you don't find it there, try locating the scripts to create this table in Oracle Database installation folder.
    Regards
    Sripathy

  • Run a report developed on Crystal Reports XI from java

    Hi,
    I am trying to run a report developed on Crystal reports XI from my Java Web Project.
    I used the configuration specified in:
    http://businessobjects.com/pdf/dev_zone/crxi_java_startup_guide.pdf
    but I am getting the error:
    "com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: There is no server specified.---- Error code:-2147217390 Error code name:serverNotFound"
    when the code reaches the line: oReportClientDocument.open(reportName, 0)
    I am using Eclipse as SDK and Tomcat as Webserver.
    Thanks for the help.

    can i use it In J2SE
    if yes where i download it.also some link for reading

  • Unable to get the java system reports

    Hi all
    In portal we are unable to get java system reports
    Thanks in advance

    It seems that your WAS installation is not fully configured and / or can you check the domain name in the IGS url? Please follow these links.
    Re: Graphics Rendering Problem
    Re: Error connection IGS
    Regards,
    Nitin

  • How to Read Data from a table (horizontal axsis) in an existing report

    Hi to all,
    I've a question. I must read the data in a table of an existing report. I develope with BO XI 3.0
    I don't know how to reach the table in my report from SDK.
    this is my code:
    reports = document.getReports();
    rep = reports.getItem(0);     
    the report has the title and a table horizontal axsis.
    I must read the column name(header column) of the table and all rows for retrieving values.
    Thank u in advance for your attention.

    hi ChinMay,
    thank u for your answer.
    I would like to ask u if Ireport refers crystal reports, while i mean to read data from a webi report.
    I've tried in many manners to read this data and i've read the SDK, but i'm unable to reach the table of my report for reading its rows. i'm able to export in XML format, i'm able to get reportelement , block, but in the java's example of SDK its not present how to obtain the reportbody and subsequently the section or directly a table. the example that i've seen show that if u create a new report u can create the reportbody, the section, the table and others. But don't show how to obtain this from an existing report.
    Probably i don't understand very well all the SDK structure and i think that is possbile to read a table(with horizantal axis) in a report without section only passing by the ReportBody.
    I know that u don't have so time to spent for things that are in the SDK, but if it's possible to have ten rows of sample about this question i'll be very happy.
    If it's not possibile, thank u very much for your interesting and disponbility and i'll try again and again and again to solve this.
    Matteo

  • Discussion: Why no centralize development for Java (like the one in ABAP)

    I am reading the NetWeaver Development Infrastructure, and noticed that due to the distributed development nature of Java, SAP recommend The Four-System Landscape for the development lifecycle.
    Each developers has their own local development environment, that's why it is necessary to 'reconcile' the environment using one more layer of system. Although they checked out the particular Development Object, the necessary library from the central is being copied by DTR to the local environment. However, there are still possibilities that someone changes the library, or other classes that being refered. And we are not talking only about the business logic, but other object in the persistance level too. Let's say your program refered to a certain field in a certain table, but someone else had changed the field name. Or even worse, you want to get the setting value from a certain setting table, but someone else had deleted the value of that record (for whatever reason).
    In short, I believe there are many 'reconcilliation' process that need to be done when the development environment is not centralized. These problems won't happen in the ABAP world, because you will notice the problem straight away when you activate your component, or test run it. In distributed environment, you will only notice it when you check-in your development object back, but it might be after some time lags, and you might not remember which part need to be taken care of.
    Not only this, the setting of 'correct' IDE environment in each local PC must be done properly. Again, in ABAP you just need to install SAP GUI and it will be your development environment.
    So, I had discussion with a friend of mine, and he asked, why there is no central development environment, like the one in ABAP? Hmm, to be frank, I also don't know. Performance problem? I notice that most IDE in the market based on the assumption that development will be done locally. Or is it for the convenient purpose, so that people can keep the development eventhough there is no connection to central server? But what is the cost for this convenient?
    What other people think?
    rgs,
    Hiroshi
    ps: As you might notice, this thread is not marked as question. I am just curious of what other people think about this issue. There will be no points rewarded for the replies.

    Hello Satya,
    So if it's a 'mere' technical limitation, then there should be a way to create centralized development for Java
    It might be an old mainframe environment, but from the development process point of view, centralized environment offers benefit where lots of versioning problem (library or data dictionary) can be solved.
    I used to work in a distributed development environment to create a web based FI/SD/MM related application. We have tons of classic problem of '<i>it is working in my environment, but not in yours</i>' type of thing. With centralized (read: ABAP), version integrity problem can be reduced to minimum.
    For the NWDI itself, I think SAP now moves toward embracing the open source platform to support the development environment. From what I've understood, Ant, for example will be used as the build tool. My personal opinion is, better if SAP creates it's 'proprietary' environment to centralized the java development process. Then it will save lot's of hidden cost during the implementation of new application/enhancement/maintenance in the whole supply chain.
    rgs,
    hiroshi

  • Transferring Development from One SAP system to another?

    I was wondering if it was possible to transfer an entire Package or a Transport with its development contents from one SAP system to another?
    It would be preferred if the method doesn't require connectivity, like for example to be able to export everything in a package to an XML-file that could be imported into an empty package on another system.
    It would need to handle all development parts, such as Reports, Function Modules, Classes, Special Classes (such as Exception Classes), Shared Objects and Persistent Objects (Yes, I like objects ), Unit Tests, Data Dictionary definitions for tables, table types, structures, data elements and so forth.
    It this in any way possible?

    Hi
    I believe u can only create a request containing all abap object of the package: u can do it by SE80.
    After releasing the request u need to pick up the data file and the cofile and past these files to the target system.
    So u can add and then import the your request in the queue of the development of the target system by trx STMS.
    Probably u need to ask a little help to your basis in order to copy and past the files from and to SAP server (I don't know if you've the authorizations).
    The name of datafile is like D<request number>.<system id>
    and the path
    /usr/sap/trans/<SYSTEM ID>/data
    the cofile name is K<request number>.<system id>
    and the path
    /usr/sap/trans/<SYSTEM ID>/cofile
    Max

Maybe you are looking for