Table in smartform throwing errors

Hi,
I was trying to create a table in a smartform. I have to display 5 colums from the table vbap based on certain conditions. I have created a table and a line type. And based on this line type I have created 5 cells under the header with text elements having the name of the columns. I then created the same 5 cells in main area with the text elements having the value within &.. I have added a loop also in the data tab of the table. However when i test the smart for it throws an error "No other column available". Is this the right procedure to create a table?

I got it..thanks..

Similar Messages

Help req for check customer table maintenance with XD02 if not throw error

hello ABAP GURUS,
check customer of the table maintenance with XD02 if not throw error i have given the codition for passing the values in the table but before that it has to check whether the customer i am passing in to the table is a customer from xd02.Here whatever no i am passing it is accepting it should not happen, but when i give the customer which is not a customer it should not accept but it has to throw the message as 'customer does not exist.Its urgent please help me
TYPES: BEGIN OF TY_KNVI,
KUNNR TYPE KUNNR,
TATYP TYPE TATYP,
TAXKD TYPE TAKLD,
END OF TY_KNVI.
DATA : VALIDFROM TYPE GUEBG,
VALIDTO TYPE GUEEN.
DATA : IT_KNVI TYPE STANDARD TABLE OF TY_KNVI,
WA_KNVI TYPE TY_KNVI OCCURS 0 WITH HEADER LINE.
DATA : V_NAME TYPE SYUNAME.
SELECT KUNNR
TATYP
TAXKD
FROM KNVI
INTO TABLE WA_KNVI
WHERE KUNNR = YYV_CFORM-KUNNR
AND TATYP = 'ZCST'
AND TAXKD = '1'.
V_NAME = SY-UNAME.
YYV_CFORM-ENTEREDBY = V_NAME.
IF SY-SUBRC NE 0.
MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'.
ENDIF.
I have used the following code to enter the data into the table maintenance it is working fine and throwing the error when the tax type is not the one which i have given in the select statements but the problem is when i have given the customer no which is not there in the XD02 tcode, it is accepting and showing the error message as MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'. now i have to check the customer no from XD02 and if it is existing in that tcode it should allow to save in the table maintenance otherwise throw a message as the 'Customer no does not exist, this I am unable to write so how can i check please help me .
thankx in advance.
Edited by: soni khadary on Apr 22, 2008 7:55 AM

Hi Kelly,
I guess <wa_tab>-handle_style is of type lvc_t_styl therefore you can do the following:
ls_edit-style = cl_gui_alv_grid=>mc_style_enabled.
"I assume you know your non-key fields' names so you can use subrotuine to perform update on each of them
ls_edit-fieldname = 'First field name' .
PERFORM update ls_edit.
ls_edit-fieldname = 'Second field name'.
PERFORM update ls_edit.
ls_edit-fieldname = 'Third field name'.
PERFORM update ls_edit
FORM update USING fs_edit type lvc_s_styl.
field-symbols: <style_tab> type lvc_t_styl,
                     <style_wa> type lvc_s_styl.
LOOP AT <tab> ASSIGNING <wa_tab>.
   if e_row = sy-tabix .
     "get you style table
     assign component 'HANDLE_STYLE' of structure <wa_tab> to <style_tab>.
     "as <style_tab> is typed fully you can read the row you are interested in
     read table <style_tab> assigning <style_wa> with key fieldname = fs_edit-fieldname
     if sy-subrc = 0.
       "update this entry
        <style_wa> = fs_edit.
*        modify table <style_tab> from <style_wa>.
     endif.
   endif.
endloop.
endform.
Note!
Though, this should work, the use of RTTI as Uwe suggested would be best practise approach as far as dynamic programming is concerned. Anyhow it is still up to you which one you pick.
Regards
Marcin
I noticed now that this line is not necessary
modify table <style_tab> from <style_wa>.
as we simply are working with field symbols, so changes made to <style_wa> are already visible in that table <style_tab>.
Edited by: Marcin Pciak on Mar 15, 2009 12:44 PM

Global temp table throwing error

Hi,
I am trying to create global temp table throwing error
please help
SQL> create global temporary table test_glb as ( select col1 from test1) on commit delete rows;
create global temporary table test_glb as ( select col1 from test1) on commit delete rows
ORA-00933: SQL command not properly ended
Thanks
Rangan S

CREATE GLOBAL TEMPORARY TABLE test_glb ON COMMIT DELETE ROWS
AS SELECT * FROM test1;btw I'm assuming you are just using the SELECT statement to copy the definition of test1. Since DDL statements commit, there will be no rows in test_glb after creating it.
Edited by: William Robertson on Feb 23, 2009 7:31 AM

PASSING INTERNAL TABLE IN SMARTFORM

HI' I M NEW TO SMARTFORMS, MY PROBLEM IS =THAT
I'VE CREATED A NEW TYPE(SAY TY_BKPF) IN THE DRIVER PROGRAM.
THEN I'VE DECLARED AN INTERNAL TABLE OF THIS TYPE.
TO PASS THIS INTERNAL TABLE INTO MY SMARTFORM I'VE PASSED THE INTERNAL TABLE'S NAME INTO THE FUNCTION MODULE UNDER THE TABLES PARAMETER.
BUT I'M NOT ABLE TO UNDERSTAND AS TO WHAT TYPE SHOULD I GIVE IT IN THE FORM INTERFACE IN THE TABLES TAB.
PLZ HELP.

Define table in smartforms
Global settings :
Form interface
Variable name    Type assignment   Reference type
ITAB1               TYPE                  Table Structure
Global definitions
Variable name    Type assignment   Reference type
ITAB2               TYPE                  Table Structure
Also have a look at below sample code. It will give you idea abt the same.
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
        INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
   MOVE-CORRESPONDING MKPF TO INT_MKPF.
   APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
    formname                 = 'ZSMARTFORM'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
    FM_NAME                  = FM_NAME
EXCEPTIONS
    NO_FORM                  = 1
    NO_FUNCTION_MODULE       = 2
    OTHERS                   = 3.
if sy-subrc <> 0.
   WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    GS_MKPF                    = INT_MKPF
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5.
if sy-subrc <> 0.
   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Have a look at below link for more help on smart forms.
http://sap.ionelburlacu.ro/sap0/sapsf001.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

How to Define Internal Table in Smartform

Hello,
I have some problem on define Internal Table in Smartform
I define a Temp_IT_Gen Type LBBIL_IT_GEN in Global Definiations
but i find that it is not available for me to append data into it,
the error message is Temp_IT_Gen is not a Internal Table - the Occurs n Specification is missing
so how can i solve it?
i want to use the internal table in the hold program.
Thanks a lot in advance.

Hi,
First U define the Table type in 'TYPES' tab of Global Definitions and then assing that table type to Internal table in 'Global Data' tab.
Eg:
define the Table Type like below in TYPES tab.
TYPES:BEGIN OF ty_TEMP.
        INCLUDE STRUCTURE XXXXXXX.
TYPES:END OF ty_TEMP.
TYPES: g_t_temp TYPE STANDARD TABLE OF ty_TEMP .
Now, define the Internal table in Global Data tab like below:
Variable Name    Type assignment    Associated Type
G_T_ITEM_1       TYPE                    G_T_TEMP
NOTE: whatever U define in Global Definitions can be used only in SMARTFORM, if u want to use it in Program U must define in Form Interface.
Hope it helps!!
Rgds,
Pavan

Report throwing error

Hi BI Experts,
I have an issue in the report output. The query is giving the data but the report is not showing the same.
when nonexisting values are given, report is throwing ERROR instead of giving blank page. Client is expecting blank page or dummy page with tables or headings etc but not the error message.
Please suggest a solution for this.
Let me know if anybody needs any other information regarding this.
Thanks in advance.

you need to use no data found logic in order to get blank or any message saying no data found for that selected value.
check this link
https://blogs.oracle.com/xmlpublisher/entry/no_data_found
or
send me your sample xml having data and no data and template i can try at my side. email: [email protected]
assign me some points if helpful

Function module throwing error from work area. Cannot find the problem...

REPORT ZPSMARTFORM1.
tables: zptable1.
types: begin of ty_zptable1,
      f1 type zf1,
      f2 type zf2,
      f3 type zf3,
end of ty_zptable1.
data: itab type table of ty_zptable1 with header line.
data: wa type ty_zptable1.
select f1 f2 f3 from zptable1 into table itab.
CALL FUNCTION '/1BCDWB/SF00000005'
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    ITAB                       =   .
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this is my driver program.In my form interface there are tables,import,export are there where i have to declare tables data.If i am putting wa means it is throwing error.Please show me the clear information.
Edited by: Julius Bussche on Nov 14, 2008 10:09 AM

REPORT ZPSMARTFORM1.
tables: zptable1.
types: begin of ty_zptable1,
f1 type zf1,
f2 type zf2,
f3 type zf3,
end of ty_zptable1.
data: itab type table of ty_zptable1 with header line.
data: wa type ty_zptable1.
select f1 f2 f3 from zptable1 into table itab.
CALL FUNCTION '/1BCDWB/SF00000005'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ITAB = .
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Plz for this driver program. Give me the exact solution.I am passing the information like itab like zptable1 ther ein the smart form table. Even now i am getting error.Here in this driver program i passed itab = itab means .I am not getting solution.If i have to change any function module name means plz tell me.What i have to put there.Plz give me the correct solution

SSRS dataset throws error when another stored procedure is called inside dataset stored procedure

Hello;
I am using Report Build 3.0, I have a simple report which gets data using dataset which is created from a Stored Procedure. I have another stored procedure which updates the data in the table which is used for the report. I want to get the live data on report everytime
the report is run so that I call that stored procedure (sp_updatedata) inside my report dataset stored procedure and here where my report fails as it throws error while creating dataset.
Here is sample:
sp_updatedata (this only returns "Command(s) completed successfully"
Create Proce sp_getReportData
As
Begin
Exec sp_updatedata -- I call it to update the data before it displays on the report
Select * from customers
End
If I remove this line it works.
Exec sp_updatedata -- I call it to update the data before it displays on the report
Thanks
Essa Mughal

Hi MESSA,
According to your description, you create a dataset based on a stored procedure. In this procedure, it calls another procedure. Now it throws error when creating dataset. Right?
In Reporting Services, when creating dataset, all the query or stored procedure will be executed in SSMS. So if the procedure can be executed in SSMS, it supposed to be working in SSRS. However, it has a limitation in SSRS. In a dataset, it can only return
one result set.
In this scenario, I don't think it's the issue of calling other procedure inside of procedure. Because we tested in our local environment, it works fine. I guess the sp_updatedata returns a result set, and the "select * from customers" returns
another result set. This might be the reason cause the error.
Reference:
Query Design Tools in Report Designer SQL Server Data Tools (SSRS)
Reporting Services Query Designers
If you still have any question, please post the error message and the store procedure (sp_updatedata).
Best Regards,
Simon Hou

Database.LoadDataSet() method throwing error while retriving data from IBM DB2 database

Database.LoadDataSet() method is throwing error during retriving data from empty table of IBM DB2 database. It is giving error code "SQL0100W".
“Error Message: 0NO_DATA [02000] [IBM] [DB2 / NT] SQL0100W FETCH, whether there is a line to be UPDATE or DELETE, or of the query result is an empty table .
SQLSTATE = 02000”

Hello SharayuPandit,
For issues regarding DB2, i suggest that you could post it to DB2 related forum:
https://www.ibm.com/developerworks/community/forums/html/forum?id=11111111-0000-0000-0000-000000000842
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to make screen field enable when table control gives an error

Hi,
I had a scneario like when table control data wrong then one parameter of the screen should be enabled for the input, i knew that screen-name will not work since it will have always table control fields only when table control gives an error.
How to make the other parameter enable when table control throws an error.
Regards,
Jaya

Hi Gobi,
Thanks for your response, but issue is - how to make other screen fields enable when there was an error in the table control data.
For table control - lets say we will use the code as i mentioned above.i am sure that we cant write the code for field enable in between loop & endloop.
as you said if we right outside the loop-endloop, the module wont be triggered when table control throws an error, because that statement was not there in the loop-endloop.
please let me know if you need any more information on the issue. I hope there is alternative for this in SAP.
Thanks
Jaya

Submit button not throwing error

I have a Search Region and a table to show the data based on Search criteria...After search I am modifying the some fields with invalid data in Result table
and I am clicking the Submit button, it is throwing error(I written Exception in EO level) , the same time if i click the submit button second time , it is not validating and throwing the error and record is saving to database with invalid data.
Could you please help me and let me know what I am missing here?

I written the following code in EntityExpert, the EntityExpert code in EO
public boolean isItemNameValid(String ItemName)
System.out.println("Entity Expert");
System.out.println(ItemName);
boolean isActive = false;
ItemNameVVOImpl ItemNameVO = (ItemNameVVOImpl)findValidationViewObject("ItemNameVVO1");
ItemNameVO.initQuery(ItemName);
if (ItemNameVO.hasNext())
isActive = true;
System.out.println("Return ");
System.out.println(isActive);
return isActive;
and I am calling the above method in EOImpl
public void setItemName(String value)
if ((value != null) || (!("".equals(value.trim()))))
ItemNameEntityExpert expert = getItemNameEntityExpert(getOADBTransaction());
if (!(expert.isItemNameValid(value)))
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"Item Name", // Attribute Name
value, // Attribute value
"MSC", // Message product short name
"UPDATE_SUPPLY_ITEMNAME"); // Message name
setAttributeInternal(ITEMNAME, value);
Please check.
Thanks,
K.Murugesan

Why Webdynpro framework is throwing error in this testcase

Hi All,
In my requirement i'm using the WTGXXX(for Discount field) in Webdynpro ABAP.
If I validate the entries there is a standard check performed by the webdynpro framework when entries other than the numercie fields are given.
This is a webdypro ALV.
For Ex:
when the discount is given as (9-33) it is throwing the error that "The entered value can only contain numerical characters" but it is not throwing any error for (9-(9/22)) or (9-(42)) instead it is calculating the values which is a good feature. But why, (9-33) this case is not handled.
I tried to keep the value in duegging it is working fine.
Before any event gets trigerred for the above cases the value is calculated by the framweork by defalut.
Some times some cases are handled sometimes not.
I'm unable to get this behavior of the framework.
For the first time (9-3*3) calcuation is throwing error from the 2nd time onwards this is giving the correct output. When I load the view for the first time and do this check then error is thrown, second time when the other calcuations are done and again do this calcaulation then this error is not shown instaead it is giving me 0 which is the result.
This case applies to the cases where the expressions result in 0 (defalut values)
One mroe test case for this is - (9-9).
Eventhough the user knows the result of these expresions, these are throwing errors.
How to handle this.
I tired handling this with own DE/Domanin CURR 15 but for the 1st time this error is theon 2nd time on wards the reuslt is shown correct.
Isn't a special case.
When I bound the table again with INITIAL data then again the erorr is thrown for that case.
ie I have one RESET button where i will bind the table again with the INITIAL table entries then agian the error is thrown for (9-3*3).
Is there any SAPNOTE applied or Exceptions to this. Please let me know.
Please replicate the same in Webdynpro Java also and share the reasons.
Currently I'm doing this by taking the string only to avoid these erorrs in case of Zero.
Regards,
Lekha.

Hi
Use another forum for Webdynpro questions: Web Dynpro ABAP
BR, Sergei

MDIS Unmapped Values ADD is not Working Throws errors

Hi Experts,
I have a Qualified table where the Non qualifier is a Lietaral Date field.
Qualified Update -> Update
New links -> Create
Existing Links -> All mapped Fields
MDIS unmapped values -> ADD
All is working well,When the Incoming file has exactly the same NOn qualifier as in Data manager, But when the incoming file has some New non-qualifers then it fails with a value Exception...
1166657856 2011/09/27 16:29:16.326 GMT Importing: 'Samplee_27sep[1].xml.MDM_DATA' Table --> 'CostCentre.CostCentre' Table.
1166657856 2011/09/27 16:29:16.341 GMT Could not create lookups. Source record number: -10, error message : Type mismatch. Invalid field values.
1166657856 2011/09/27 16:29:16.346 GMT Import failed. Could not create lookups. Source record number: -10, error message : Type mismatch. Invalid field values.
Import action: Update (All Mapped Fields)
Source record no: 1
But ideally it should NOT fail as the MDIS Unmapped fields are set to ADD..
I would expect it to Add any new NON qualfiers to QT and add that Link to that Record.
But it is throwing error...
Did anyone face this issue till date???
Kind Regards
Eva
Why is this behaviour..

Hi,
In the Import map as the Non qualifier is the literal date field and in DM i can see they are stored in MM/DD/YYYY format.
The incoming value from the File is also the same format but the Config parameters date format in Import map is different, is this the problem for not adding New dates even though the MDIS unmapped fields are set to ADD..
Also, are Config parameters Specific to Map or Repository Or server!!
i.e if i change a config parameter and save the map.
will the config parameters in all import maps be changed automatically??
Kind Regards
Eva

FI SUBSTITUTION throwing error

Hi,
I copied RGGBS000 into ZBGGBS000 and added two exits U102 and U103 to it after that we did all the steps required like going to GCX2 then OB28 .......steps that are required to have custom include for substitution.
now when we are transporting the customizing request which has these customizing changes it shows following error during transport
User exit UFP00 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP01 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP02 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP04 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP05 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP06 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP13 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP02 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP02 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP02 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP02 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP30 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP31 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
User exit UFP32 not declared in form pool RGGBS000
Postprocessing necessary when upgrade has been completed
The sequence of transports are correct.
Whan i am worried is how come these series of user exit are throwing error they are neither present in RGGBS000 or my version ZGGBS000. Can any one let me know how/where these exit UFP00 are called and declared.

Have you added all your exits to the GET_EXIT_TITLES subroutine at the top of the program? See below.
*       FORM GET_EXIT_TITLES                                           *
*       returns name and title of all available standard-exits         *
*       every exit in this formpool has to be added to this form.      *
*       You have to specify a parameter type in order to enable the    *
*       code generation program to determine correctly how to          *
*       generate the user exit call, i.e. how many and what kind of    *
*       parameter(s) are used in the user exit.                        *
*       The following parameter types exist:                           *
*       TYPE                Description              Usage             *
*       C_EXIT_PARAM_NONE   Use no parameter         Subst. and Valid. *
*                           except B_RESULT                            *
*       C_EXIT_PARAM_FIELD Use one field as param. Only Substitution *
*       C_EXIT_PARAM_CLASS Use a type as parameter Subst. and Valid *
* --> EXIT_TAB table with exit-name and exit-titles                 *
*                 structure: NAME(5), PARAM(1), TITEL(60)
FORM get_exit_titles TABLES etab.
DATA: BEGIN OF exits OCCURS 50,
          name(5)   TYPE c,
          param     LIKE c_exit_param_none,
          title(60) TYPE c,
        END OF exits.
exits-name = 'U100'.
exits-param = c_exit_param_none.
exits-title = text-100.             "Cost center from CSKS
APPEND exits.
exits-name = 'U101'.
exits-param = c_exit_param_field.
exits-title = text-101.             "Cost center from CSKS
APPEND exits.
* begin of insertion                                          "wms092357
exits-name = 'U200'.
exits-param = c_exit_param_field.
exits-title = text-200.             "Cons. transaction type
APPEND exits.                       "from xref1/2
* end of insertion                                            "wms092357
* PLEASE DELETE THE FIRST '*' FORM THE BEGINING OF THE FOLLOWING LINES *
*        IF THE ACCOUNTING MODULE IS INSTALLED IN YOUR SYSTEM:         *
* EXITS-NAME = 'U102'.
* EXITS-PARAM = C_EXIT_PARAM_CLASS.
* EXITS-TITLE = TEXT-102.             "Sum is used for the reference.
* APPEND EXITS.
** EXIT EXAMPLES FROM PUBLIC SECTOR INDUSTRY SOLUTION
** PLEASE DELETE THE FIRST '*' FORM THE BEGINING OF THE FOLLOWING LINE
** TO ENABLE PUBLIC SECTOR EXAMPLE SUBSTITUTION EXITS
INCLUDE rggbs_ps_titles.
REFRESH etab.
LOOP AT exits.
    etab = exits.
    APPEND etab.
ENDLOOP.
ENDFORM.                    "GET_EXIT_TITLES

How to throw error from process without raising exception

Hi ,
I like to throw error messages in Process error section whenever my If condition fails from PL/SQL anonymous block.The process is fired after submit-computation and validation.Also i like to avoid placing raise_application_error from the Process region source.
My task is to validate whether a itemvalue is in from the table lists or not.
like --- If :P1_X not in ('abc','xyz') then throw error .(where abc and xyz are tablename) .Instead of placing the validation as Validation routine i must have to place it in Process since the :P1_X item value obtain after computation and validation of another process.
Thanks & Regards,
ROSY.

Hi Vikas ,
Again thnx for ur input and sorry 4 my late reply.
Probably i cant make my actual requirement clear to you.
I want to press a submit button and the process will be fired.The process should check the item :p1_x value if this value is not in the tablenames then here i am throwing error by raise_application_error .I want to make this customized such that instead of raising the error i want to make the error string display in the error message section which is the error pattern usually displayed as Inline error notification for the validation types.But since its not validation rather process so how can i handle the situation.
Any suggestion ?
Thanks & Regards,
ROSY.

Table in smartform throwing errors

Similar Messages

Maybe you are looking for