Table name to store the Condition of service number in ML81N

Hi All,
Is anyone can advise where does the condition values stored for each service number in ML81n.
Can you please provide the table name. Thanks,

Hi,
I required to get the item conditions values for each services in ML81N. Is these conditions value are stored in KONV table and what are the Key data i need to pass in to KONV to retrieve those data? Appreciate your advise. Thanks.

Similar Messages

Which table stores the condition values of a purchase order line item?

Hi,
Please let me know the table that stores the condition values of purchase order line items(when we click on conditions tab after selecting an item then we can see the condition types and there is a corresponding condition value for that condition type.
My requirement is to get the actual price for a purchase order line item(it can be seen in the last line and it is calculated after considering all the condition types) and display this value in a custom report.
Thanks,
Ravindra

Hi Ravindra
You can find the conditions data for PO in TAble KONV.
KONV-KSCH is the condition type
KONV-KWERT is the cond value
KONV-KNUMH is the condition doc no. which is there in EKKO field KNUMH.
So u have to make a link between KONV-KNUMH and EKKO-KNUMH.
Thanks
Vijeta

Table Name to see the Document Flow for Service Order - T. Code IW33?

Hi,
can u advise the Table Name to see the Document Flow for Service Order - T. Code IW33?
Ravi.

Hi,
From SERVICE ORDER you cant get the INVOCIE NUMBER,
You will get the SALES ORDER number for that Service order in QMEL table and fetch the Sales order and then goto VBFA to get the Invoice number for the sales order with the DOCUMENT CATEGORY M.
hope it will serve you.
thanks,
santosh

Table Names which stores GRN and GRIR Details of a PO

Hi Friends,
I want table names which stores GRN and GRIR details of a PO.
Thanks in advance
Expecting ur answers,
Cheers;-)
R.Kripa.

Hi,
From MKPF get the gr for PO.
if you see VGART = 'WE' and BLART = 'WE' then you get all MBLNR s GR related PO's. and using those go to MSEG table and get MSEG-EBELN and MSEG-EBELP
this is the flow...
MKPF to it_mkpf where VGART = 'WE' and BLART = 'WE'.
from
MSEG get EBELN,EBELP for all entries of MKPF and get PO's corresponding GR's
i hope it is clear...
Regards
vijay

Table name to get the test equipment details

Hi all
The table name in which the test equopment assign to each inspection characteristics in the inspection plan in qp03.
thanks
v braj

PLFH - this table will give you the PRT's /TE's assigned to a insp.char in a task list.

Get the Table name by providing the Sequence name

Hello,
I wish to retrieve the table name to which the sequence is related.
I understand that when the sequence was created, no reference is mentioned to any table. The sequence may be used across many tables.
But the DB definitely knows internally how many tables are referencing the particular sequence.
So, can anyone help me in finding the table (or all tables) referencing one particular sequence.
Thanks and Regards
(Please treat this as urgent as i am desperately in need of such a query)

I share Adrian's scepticism. Using the data dictionary we could find all the program units - TRIGGERS, TYPES, PROCEDURES, etc - which use the sequence. From there we can find all the TABLES that are also referenced by those programs. And that's as good as it gets in Oracle. We cannot definitely say which tables use which sequences (although a good naming convention helps).
Of course, your DBA may have access to some accurate and up-to-date documentation. But that is maintained externally to the database and not derived from it.
Cheers, APC

Table name which contains the email addresses maintained in address area of SCOT

HI,
I would like to know the table name which contains the email addresses maintained in address area of SCOT.
I know how to see through SCOT, but I want to see as a list through SAP table.
I am not able to see email list through SXNODE AND SXADDRTYPE tables.
Thanks,
Nagaraju Ravuri

Hi Nagaraju,
You may use ADR6 table and field SMTP to get email address of respective users.
Regards,
Deepak Kori

Table name where all the SAP Script names are stored

Hi Gurus,
               Can i know the table name where all the SAP Script names are stored in SAP Database.
               Thanks in advance,
                Shyam.

Yes TNAPR is the table which contains sapscipts name and print program names.
Step:1: Goto to the Table TNAPR using SE11
Step:2: Get the Contents of the Table(CNTRLSHIFTF10)
Step:3: On the Table Content Selection Screen, Type the driver program name in the field PGNAM and execute(F8).
Step:4: FONAM field of the result display contains the SAPScript Name for our driver program.
Regards,
Lalit Mohan Gupta.

Query for retreiving table names that have the same data

Hi,
Does anybody know how to retreive all the table names that have the same data in their respective tables but i dont know the table names or its fields. Is there any possible query to perform this action???
Thanks in Advance,
Balaji.

What about...
WITH manager_list AS
SELECT name,
        LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
        KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
FROM   (SELECT m.name,
                e.id,
                ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
         FROM   manager m,
                join_table jt,
                employee e
WHERE m.id           = jt.manager_id
AND   jt.employee_id = e.id
AND   m.name = :P_MANAGER)
GROUP BY name
CONNECT BY prev = PRIOR curr AND name = PRIOR name
START WITH curr = 1
), all_list AS
SELECT name,
        LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
        KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
FROM   (SELECT m.name,
                e.id,
                ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
         FROM   manager m,
                join_table jt,
                employee e
WHERE m.id           = jt.manager_id
AND   jt.employee_id = e.id)
GROUP BY name
CONNECT BY prev = PRIOR curr AND name = PRIOR name
START WITH curr = 1
SELECT a.*
FROM   manager_list m,
       all_list a
WHERE m.employees = a.employeesWould be easier in 11g, but I don't have an installation here so this is based on 10g.
Cheers
Ben

I like to know the table name where all the Interface name ( Data Type and

Dear Friends,
I like to know the table name where all the Interface name ( Data Type and Message Type in IR ) is stored.
Thanks.

Hi,
Please find the repository APIs in the SE24 class builder that can be used for accessing repository objects from the ABAP stack of SAP XI. Check CL_SRAPI* in the SE24 transactions for digging further.
location of interface objects
CL_SRAPI_DATA_TYPE---data type
CL_SRAPI_DATA_TYPE_ENH---data type enhancement
CL_SRAPI_FAULT_MESSAEG_TYPE--fault message type
CL_SRAPI_MESSAGE_TYPE--message type
CL_SRAPI_INTEGRATION_SCENARIO--integration scenario
have a look at the table SXMSPMAST, SXMSCLUP & SXMSCLUR
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fbe7b8e-0a01-0010-b69b-b7e717378f22#search=%22SXMSPMAST%20%2B%20XI%22
That document has references to lot of tables maybe it can be of use to u.
Look at the below thread for SXMB_MONI tables and Function module:
In Which Database Table the Messages are Stored in XI
Message Monitoring --> corresponding tables?
Edited by: Dharamveer Gaur on Oct 8, 2008 10:40 AM

Field symbols as Table name and in where condition in a select statement

Hello All,
I have a scenario where I need to get user input on table name and old field value and new field value. Then based on user input, I need to select the record from the database. The column name for all the tables in question is different in the database, however there data type is the same and have same values.
I am not able to use a field symbol for comparing the old field value to fetch the relevant record in my where clause.
I cannnot loop through the entire table as it has 10 millilon records, please advice on how to add the where clause as field symbol as the table name is also dynamically assigned.
Here is my code:
DATA: TAB       LIKE SY-TNAME,
      TAB_COMP1 LIKE X031L-FIELDNAME,
      TAB_COMP2 LIKE X031L-FIELDNAME,
      NO_OF_FLD TYPE N.
DATA: BEGIN OF BUFFER,
        ALIGNMENT TYPE F,
        C(8000)   TYPE C,
      END OF BUFFER.
FIELD-SYMBOLS: <WA>   TYPE ANY,
              <COMP1> TYPE ANY,
              <COMP2> TYPE ANY.
GET TABLE NAME GIVEN BY USER IN LOCAL VARIABLE
TAB = TAB_NAME.
CREATE FIELD NAME BASED ON THE TABLE NAME ENTERED.
CASE TAB_NAME.
WHEN 'OIUH_RV_GL'.
      KEY FIELD
        TAB_COMP1 = 'GL_GL_SYS_NO'.
        NO_OF_FLD = 1.
WHEN 'OIUH_RV_OPSL'.
      KEY FIELD
        TAB_COMP1 = 'OPSL_GL_SYS_NO'.
        NO_OF_FLD = 1.
WHEN 'OIUH_RV_OTAX'.
      NOT THE ONLY KEY FIELD
        TAB_COMP1 = 'OTAX_GL_SYS_NO'.
        TAB_COMP2 = 'OTAX_TAX_POS_NO'.
        NO_OF_FLD = 2.
WHEN 'OIUH_RV_GTAX'.
      NOT THE ONLY KEY FIELD
        TAB_COMP1 = 'GTAX_GL_SYS_NO'.
        TAB_COMP2 = 'GTAX_TAX_POS_NO'.
        NO_OF_FLD = 2.
WHEN OTHERS.
        EXIT.
ENDCASE.
SET FIELD SYMBOL WITH APPROPRIATE TYPE TO BUFFER AREA.
ASSIGN BUFFER TO <WA> CASTING TYPE (TAB).
How to add where clause and remove the if condition in the select -- endselect
SELECT * FROM (TAB) INTO <WA>.
ASSIGN COMPONENT TAB_COMP1 OF STRUCTURE <WA> TO <COMP1>.
IF NO_OF_FLD = 2.
    ASSIGN COMPONENT TAB_COMP2 OF STRUCTURE <WA> TO <COMP2>.
ENDIF.
IF <COMP1> = OLD_SYS_NO.
    code for updating table would come here
      WRITE: 'MATCH FOUND'.
      EXIT.
ENDIF.
ENDSELECT.
Please advice. Thanks much.
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:33 PM
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:34 PM
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:35 PM

1. Create single column table for holding field name depending on the table entered.
2. Take input from user: for e.g. table_name
3. Using case load single column table with required fields
   for e.g.
CASE TAB_NAME.
   WHEN 'OIUH_RV_GL'.
         Append 'GL_GL_SYS_NO' to KEY_FIELD --> KEY_FIELD is the single line internal table as mentioned in step 1.
   WHEN 'OIUH_RV_OPSL'.
         Append 'OPSL_GL_SYS_NO'.
   WHEN 'OIUH_RV_OTAX'.
         Append 'OTAX_GL_SYS_NO' to KEY_FIELD.
           APPEND 'OTAX_TAX_POS_NO' to KEY_FIELD.
   WHEN 'OIUH_RV_GTAX'.
         Append 'GTAX_GL_SYS_NO' to KEY_FIELD.
           APPEND 'OTAX_TAX_POS_NO' to KEY_FIELD.
   WHEN OTHERS.
      EXIT.
   ENDCASE.
   Now depending on the table name you have required column ready
4. Create dynamic internal table using following sudo code
   Fill the fieldcatlog using the single column field table and DD03L table, See what all columns from DD03L you want to fill in field catlog table
   loop at internal table with all the fields.
    move it to field catalog.
    append field catalog.
   endloop.
5. Pass this field catalog table to static method create_dynamic_table method
   DATA table TYPE REF TO DATA. --> data object for holding handle to dynamic internal table.
   call method cl_alv_table_create=>create_dynamic_table
   exporting
      it_fieldcatalog = fieldcatalog_tab
   importing
      ep_table = table.
6. Now assign table reference to field symbol of type table.
   ASSIGN table->* to <field-tab>.
7. Also create work area <field-wa> using refrence of table.
   create data object wa LIKE LINE OF <field-tab>.
   ASSIGN wa->* to <field-wa>.
8. Also define field symbol for field name.
   for e.g. <field_name>
4. Dynamic internal table is ready
5. Now execute the select statement as follows:
   SELECT (KEY_FIELD)
     INTO <ITAB> --> created dynamically above
      FROM (TABLE_NAME)
     WHERE (WHERE). --> WHERE is single line internal table having line type of CHAR72. So for every old value there will be one line
     Where condition is same as like we give in static way only difference in this case it will stored in internal table line wise.
    In this case you need to append all your where condition line by line in to WHERE.
5. To fill this dynamic internal table using ASSIGN COMPONENT <Comp_number> OF STRUCTURE <field-wa> TO <field-name>
   So in this case if first field of structure STRUCT1 is user_id then sudo-code will be
   loop at internal table containing list of fields into field_wa --> single column field table
       ASSIGN COMPONENT field_wa OF STRUCTURE <field-wa> TO <field>. "Here field_wa is wa area for single column internal table holding all the fieldnames.
       Now <field-name> points to user_id field. Move some value into it as nornally we do with variables.
       Move <your_new_value> to <field-name>. --> Assign new value
        or
        <field-name> = <your_new_value>.
   Endloop.
6. After completing all the fields one row will be ready in <field_wa>.
   APPEND <field_wa> to <field_tab>.
Hope this helps you.
Thanks,
Augustin.

The Condition for service price determination incomplete

Dear experts,
I run the System with EC&O Best Practice. Howerver, I can not enter Services on tab Service of Sales Order: Short text of Service, Quantity, UOM, Gross Price. the error "Condition for service price determination incomplete" occours when I press Enter key.
Conditions for service price determination incomplete
Message no. SE477
Diagnosis
Either the calculation schema for services does not exist or the condition types have not been defined correctly.
Procedure
Please check your Customizing settings for service conditions.
If you have not yet defined any conditions for services, you can adopt the standard SAP settings from client 0.
Please help me check this issue on the attached file.
Thank you very much.
Thanks,
Binh Tran
<Personal details shared by OP is removed by Moderator. >
Message was edited by: Jyoti Prakash

Hi All,
Thank you very much for your inputs.
I checked all the notes, 25357, 27024 and 1383066. Everything is ok in the system. and these notes explained more on the MM part not on the SD- BOS. However, still i am not able to complete the Inquiry, same error exists.
This error is in SD not in MM, while i am creating the inquiry BOS.
If any one come across it and solved it, please let me know.
Regards,
Suresh

Table name which stores teh vendor Email id

Hi ,
Can any body tell me the table name, where i can find the email id of the vendor.I found one structure, SZA1_D0100 where the email id is stored. but as it is of structure i cannot use that in my report. Could any body help me regaridng the issue.
Thanks,
Santosh.

Example...
*Selecting the ADRNE from LFA1...
SELECT SINGLE ADRNR FROM LFA1 INTO I_ADRNR
WHERE LIFNR = ITAB-LIFNR.
*Passing ADRNR to ADR6 to get Email...
SELECT SMTP_ADDR INTO TABLE I_Z1EMAIL
FROM ADR6 WHERE ADDRNUMBER = I_ADRNR.

TABLE NAME WHICH TELLS THE SHOPPING CART STATUS

HI,
need to make the price field non editable depend on sttus of shopping caRT.
For this i require the table name.
thank you.

Hi,
Status I1120 means Change was Transmitted.
You can find all the statuses and their descriptions in transaction BS22.
BR,
Disha.

Table name to know the list of queries

I want to get the list of reports in which given info object has been used.
Could you help me in indentifying the table name which will provide the this info.

Dear R S
I do not know such a table, but maybe there is another solution. If you start the "Transport Connection" and select your InfoObject with grouping option "In Data Flow Afterwards" you should see all queries under node "Query Element".
Greetings,
Stefan

Table name to store the Condition of service number in ML81N

Similar Messages

Maybe you are looking for