Table to find out the volume of data

HI Experts,
Is there any table to find out the volume of data in the data targets(infocubes and DSO)
Thanks & Regards,
Prasad.

Hey. I am not aware of anything that can give you a flat list of providers and number of total records. It would be a fairly simple program to write though.
But, you could just go the old school route and just lookup the number of entries on the active table for the DSOs. Cube would be a bit different and would probably depend on what you really want to meassure but I guess the E table is a place to start.
I also know there are some DB size summary tables that show you number of records per table. One of those tables is DBSTATTORA (other similar tables exist). But again it is at the actual table level and not a provider summary. And I will not speak to how accurate the data is as I have not tried to validate. I will say the FM in the link posted above actually just does a number of records select on whatever table you enter.
Thanks

Similar Messages

Table to find out the function modules used in a particular program

Hi,
Is there any standard table to find out the function modules used in a particular program?
Such as there is a table D010TAB to find out the tables used in a program .

Hello
There is no exist such table.
But try this snippet:
REPORT ZSEARCH.
PARAMETERS: P_NAME LIKE D010SINF-PROG.
DATA: PROGTXT(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: TMP(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: FUNCT TYPE RS38L_FNAM OCCURS 0 WITH HEADER LINE.
DATA: INCL TYPE RSEUINC OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RS_GET_ALL_INCLUDES'
     EXPORTING PROGRAM    = P_NAME
     TABLES    INCLUDETAB = INCL.
LOOP AT INCL.
READ REPORT INCL-MASTER INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
REFRESH TMP.
ENDLOOP.
READ REPORT P_NAME INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
LOOP AT PROGTXT.
IF PROGTXT CS 'CALL FUNCTION'.
    SEARCH PROGTXT FOR ''''.
    IF SY-SUBRC = 0.
      DO.
        SHIFT PROGTXT LEFT BY 1 PLACES.
        IF PROGTXT(1) = ''''.
          SHIFT PROGTXT LEFT BY 1 PLACES.
          DO.
            SHIFT PROGTXT RIGHT BY 1 PLACES.
            IF PROGTXT+71(1) = ''''.
              SHIFT PROGTXT RIGHT BY 1 PLACES.
              CONDENSE PROGTXT.
              FUNCT = PROGTXT. COLLECT FUNCT. EXIT.
            ENDIF.
          ENDDO.
          EXIT.
        ENDIF.
      ENDDO.
    ENDIF.
ENDIF.
ENDLOOP.
SORT FUNCT.
LOOP AT FUNCT.
WRITE: FUNCT. NEW-LINE.
ENDLOOP.

How to find out the volume of the data updated in the custom table

Hi,
I need to find out the the volume of the data inserted or updated in the the custom table(Y tables).I have tried by the sm37.the job running in to update the table but i didnot get thde amount of the data.and if get the volume of the data which being updated in the custom table is there any option to control that amount to being updated?
Thanks in advance .....waiting for the respone.

Hi Sreenivas.
How did you find the solution to this? Trying to do the same thing!
Cheers,
Tom

How to find out the top 10 data loads based on time duration?.

Hi,
We are working on performance tuning. so we want to find out the top 10 loads which had run long time in date wise.
We need the load start time and end time of the load process, Infosource and datatarget name.
There are nearly 1000 loads, So it is very difficult to collect the load's timings in RSMO.
Is there any another alternative to collect the top 10 loads based on time duration in date wise?
Thanks & Regards,
Raju

Hi Gangaraju,
You can install BI Statistics for getting these type of data.
Or you check in RSDDSTAT or RSMDATASTATE_EXT or table for the Load process time.
Or goto t-code ST13 to get detailed analysis of a Process chain for a given period.
Hope this helps.
Regards,
Ravi Kanth

Table to find out the list which shows the last load of infoobjects

Hi All,
I have to find out the Info objects which stop loading in production system, so that we can delete number range buffering for those objects. In table RSDCHABALSLOC I found the info objects which has number range buffering. But total 17000 objects are there its not possible for me to go and check in manage tab for each object manually. I need a table which shows the information like when was the last load happened for the info object. I checked in RSDIOBJ table but time stamp of it not matching with manage data target tab of Infoobject.
Regards,
Asim

Hello Asim,
Have a look at the table RSLDPIO, this should give the last run time of infopackage with other details like related datasource, info object etc. everything.
Just go to SE11 and display data of this table - provide your datasource name to OLTPSOURCE or Info Object Name to VARIANT. Also you can check based on specific infopackage name.
Then sort it in ascending on TIMESTAMP, top most timestamp will be the last run time of that infopackage.
Another helpful table will be RSREQDONE.
Please let me know if this serves the purpose.
Thanks
Amit

How do I find out the volume of the documents I have saved on my Macbook?

I need to know the complete volume of my documents so that can arrage enough room in my external hard drive to save them prior to a full cleaning of my Macbook?

If you plan to back up your entire user folder, which should be where all that stuff is kept, then just select the user folder and use File -> Get Info. It will take some time to calculate the size. If you don't plan on doing that, and plan to back up those specific things piecemeal, then just look at the size of each and add it all up. Note, though, that hard drives of different sizes have different block sizes, so the size you calculate may not be accurate for the drive you plan on backing up to. For example, a folder full of lots of small files that takes up a total of 1 MB of space could take a lot more or less space on a different drive.
Also, note that a single backup is not really adequate. After you erase the hard drive, you'll only have one copy of all your data, with no backups, leaving you in an extremely vulnerable state until you restore. Many people lose all their data because their backups are screwed up somehow and they don't find out until they erase everything. Make sure to make a minimum of two backups, on two completely separate hard drives.
Finally, regarding the "Macs are easy to hack" comment... that depends. If you have someone malicious who has had unsupervised physical access to your Mac, then you can't be sure of anything. In such a case, wiping the hard drive is the only possible response. After reinstalling, make sure to use FileVault, with a strong password, to encrypt your hard drive, preventing anyone with physical access from being able to modify your system, and be extremely selective about what you restore from your backups.
However, there's no known malware at this time capable of getting past the security built into Mac OS X, unless you help it out by disabling Gatekeeper or installing Java and giving it free reign in your browser. So if you're thinking you got infected with some kind of malware, that's not likely. It's also extremely unlikely, unless you have done something to compromise the security of your Mac, that you have been hacked remotely.

Find out the time sheet data entry fields

hi
this is satish,
i inserted the time sheet values in the time sheet data entry view. now the my problem is where these field values store in which tables.
thanks for all

Hi:
I need to transfer CATS data to FICO. I found out about transaction CAT7.
At the moment, I have 2 issues:
1) My CATSDB data have status "30". However, there is no corresponding entries in CATSCO. Could you tell me what I need to do to ensure that CATSCO has values?
2) My FICO system is running on 4.6C whereas my HR system is running on ECC6.0. Can CAT7 still works?
I appreciate your response.
Thanks,
Ash

Table for finding out the User details

Hi All,
We need to create a KPI for number of hours a user has looged into a system. Is there any specific table where all the user related information is captured.If the information is not present in a table where can we find the above information?Please someone help me out.....
Also is it the same in all the systems or does this information differ from system to system?If it differs then how do we find the number of hours a user has logged in for a BW system, for a CRM system and for ECC system?
Regards,
Shravani

Hello,
USR01User master record (run-time data)
USR02 Logon data
USR03 User address data
USR04 User master authorizations
USR05 User Master Parameter ID
USR06 Additional data per user
USR07 Object/values of last failed authorization check
USR08 Table for user menu entries
USR09 Entries for user menus (work areas)
USR10 User master authorization profiles
USR11 User Master Texts for Profiles (USR10)
USR12 User master authorization values
USR13 Short Texts for Authorizations
USR14 Surchargeable language versions per user
USR15 External User Name
USR20 Date of last user master reorganization
USR30 Additional Information for User Menu
USR40 Table for illegal passwords
USR41 User master: Additional data
USRCOBJ Object Filters for Exploding Product Structures
USRM0 Material Master User Settings: User Screen Reference
USRM1 Material Master User Settings: Organizational Levels
USRM2 Material Master User Settings: Logical Screens
USRMM User settings: material master
Might be these can help you.
Thanks
Geeta

Table to find out the class attached to a document in DMS

Hi,
I would like to know how can i get the class attached to a document in Document
Management System. Is there any database table ???

KLAH-CLASS ------------------------------------------------------- (class name)
KLAH-KLART = KSSK-KLART ---------------------------------- (class type)
KLAH-CLINT = KSSK-CLINT
KSSK-OBJEK = INOB-OBJEK ---------(DOKAR+DOKNR+DOKVR+DOKTL)
INOB-OBTAB = 'DRAW' ----- (table name)
but i suggest you to use BAPI_DOCUMENT_GETDETAIL2

TABLE TO FIND OUT THE PERSONAL NUMBER DETAILS FOR MAINT ORDER OPERATION

Dear Friends,
While creating the maintenence order,i am assigning the operation,
Against the each operation ike to alllocate some people(personal number),through requirments assignment tab in the operation.
I want to know in which table and filed, this personal number information is stored since i need to develop a report based on this.
Thanks and Regards
V.Dhanasekaran
Edited by: Dhanasekaran Vadivalagan on Apr 19, 2010 12:55 PM

Hi Dhanasekharan,
You can send the Order Number to AFKO table and get the AUFPL (Operation No) for that Order.
Then send this AUFPL to AFVC Table and get the personnel Number PERNR field.
This you can make use for reports.
Regards,
MLN Prasad

Table for finding out all the G/L accounts of a financial statement version

Hi all,
is there any table to find out the G/L accounts which will come under the tree of financial statement version(OB58). Please help.

With FM FI_IMPORT_BALANCE_SHEET_POS, you will get the account list in the internal table I011Z.
You will get a list of intervals I011Z-VONKT - I011Z-BILKT.

Table name to find out the application name

In table WWV_FLOW_USER_ACTIVITY_LOG there is a column called flow_id ,which is the application id .I want to know which is the table to find out the application name for a flow_id.
Thanks in advance,
Madhuri

Madhuri,
I don't know how you are trying to access that table. The owner is the HTML DB schema, FLOWS_010600 for the 1.6 version. If you try to access it from your application page or another schema, of course you won't see it.
Scott

How to find out the max mem can be allocatedTT for 32 bit Win ?

How to find out the maximum Permanent Data Size and Temporary Data Size that can be allocated for the Oracle Times Ten for 32 bit Windows OS.

Hi Chris,
Am I write in saying that this also depends on shared memory setting as well?
If that is the case, on a platform like window 2003 32-bit, one cannot have more than 4GB of shared memory. Windows Server 2003 includes support for a startup switch (entered in the boot.ini file) that allows the allocation of memory and memory address space. Regardless of the amount of physical memory that is installed on the system, the operating system uses a virtual address space of 4 GB. Out of that amount, by default, 2 GB is allocated to user-mode processes (for example, Oracle or TimesTen) and 2 GB is allocated to kernel-mode processes (for example the operating system and others). In a nutshell on systems that have more than 1 GB of RAM, this startup switch can be used to allocate more memory to applications (3 GB) and less memory to the operating system (1 GB). However, adding adding the /3GB switch to the boot.ini file will not increase the amount of physical RAM memory, the 3GB switch just tells the computer to allocate the existing memory space differently.
For a 32-bit TimesTen the limit on memory cannot be more than 2GB (PermSize+TempSize). For example on Linux 32-bit I have 1024MB and 512MB for these two parameters.
Thanks,
Mich

How to find out the max/min value of one field corresponding to a second field in HANA through graphical way.

Hi,
I am trying to find out the latest delivery date(EINDT) for each purchasing document (EBELN) through graphical way.
The view contains other fields apart from the above mentioned two fields.
When only the two fields (EBELN, EINDT) are there, then in semantics, I can select 'Max' as aggregation to get the maximum value for each document.
If I do like this, then I need to join more than 3 views and also so many joins in calculation view. Taking so much time for data preview.
Hence , please help me in getting the solution while the view contains other fields also.
Thanks in advance.
Thanks,
Jyothirmayi

Hi Sreehari/Vinoth,
Thank you for your replies.
if only two fields are then I can get the max/min values of one field corresponding to other field.
But more than two fields are there with different values, then let me know how to find out the max/min value of a particular filed corresponding to the 2nd field with other fields also should be in the output.
I hope you understood my issue.Please revert in case of questions.
Thanks & Regards,
Jyothirmayi

Finding out the Append Structures

Dear All,
We are into the upgradation project and want to find out the Append Structures/Data Elements/Domains in the existing system and need to replicate in Target.
We are not aware about the Append Structures/Data Elements/Domains only.
Can anyone help us regarding how to find this out?
Thx in adv.

Hi,
check the tcode SPDD..also in SE11 u can give the dataelemnt z*..u will get it..
Also check the below links..
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66617d9011d396b60000e82de14a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
http://www.sap-img.com/bc018.htm
Reward points if u find useful..
Regards,
Nagaraj

Table to find out the volume of data

Similar Messages

Maybe you are looking for