Table to view Total Weight of Shipment

Hi,
Can anyone help in viewing the Table for the Total Weight of the Shipment(Shipment with single and multiple deliveries).
Thanks in advance.

I do not think there is any, you might need to create a Z field that. Get the help of your developer and do it. You might need to wirte a logic for the calculation...
Thanks
Chandra Kiran

Similar Messages

How can get total weight in shipment

Hi,
I want, How can get the total weight quantity in shipment (VT03N)? That is sum of delivery quantity of all line item.
All ready, I have checked to table VTTP there only showing delivery number in field name VBELN.
Is it possible please tell me which table through I can get the total weight quantity.
Regards,
Devendra

Hi Prashanth,
Thanks for reply,
As suggested you, same think I used the logic and solved the problem.
VTTP-TKUNM (Shipment Number)
VTTP-VBELN (Pickup all delivery number)
LIPS-VBELN (Give all delivery Number)
LIPS-NTGEW (net weight) or LIPS-BRGEW (gross weight) sum up of all the quantities for the field.
Regards,
Devendra

Which table or view is the PO total

I am trying to modify the Printed Purchase Order Report(Portrait)
POXPRPOP
Can some one tell me which table the po total are stored for both blanket & standard po's.

Hi,
Blanket PO Total has stored in the field BLANKET_TOTAL_AMOUNT,table name PO_HEADERS_ALL.
But for Standard PO Total has not stored in any of field in the above table.That PO total has define in the form level from the PO line Amount.
I hope this will help you..
Thank you
Regards
M.R.Sivasooriyan

GR Table for incoming material and GI shipment

Dear All,
I'm trying to make report to show total GR for incoming material (101-102) and shipment (601-602) per month, is there any shortcut table that already sum or show total amount for GR or GI material instead of MSEG?
ex. I can get total GR to Production Order using AFPO table, it shows total GR Production per order, so i can get only 1 summary record instead of 31 records of daily confirmation to production order.
Best Regards,

HI ,
i think u can check table EKBE and check for VGABE.
Regards
Prabhu

Sales Order Total Weight Display in a report

Hi All,
Is there any way that i can display the total weight and Unit of weight of a sales order in a report. Please let me know all the possibilities..
RV45A-BTGEW and RV45A-GEWEI are the technical names of the fields that i have to display..
thank you in advance.
Suresh

Hi Suresh,
After having selected the required fields and the corresponding values into an internal Table..
do something like this..
loop at itab.
at last.
sum.
write : / 'TOTAL',itab-BTGEW.
endat.
endloop.
the command sum adds up all the quantity fields..
regards
satesh

ORA-01092: ORACLE instance terminated. Disconnection forced ORA-00942: table or view does not exist on 12C RAC

Hi Geeks,
I have encountered an issue while starting up my database on 12c RAC.
Till mount it goes fine but when i attempt to open it throws me an error.
Total System Global Area 1.5400E+10 bytes
Fixed Size                  4737560 bytes
Variable Size            2952791528 bytes
Database Buffers         1.2415E+10 bytes
Redo Buffers               26857472 bytes
Database mounted.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00942: table or view does not exist
Process ID: 11338068
Session ID: 1429 Serial number: 3
Here is the trace file output...
ORACLE_HOME = /oracle_home/app/orahome
System name:    AIX
Node name:      INS1
Release:        1
Version:        7
Machine:        00C8CCA74C00
Instance name: INST1
Redo thread mounted by this instance: 1
Oracle process number: 7
Unix process pid: 20381876, image: oracle@ins1 (TNS V1-V3)
*** 2014-11-27 22:49:20.892
*** SESSION ID:(197.5) 2014-11-27 22:49:20.892
*** CLIENT ID:() 2014-11-27 22:49:20.892
*** SERVICE NAME:() 2014-11-27 22:49:20.892
*** MODULE NAME:(sqlplus@ins1 (TNS V1-V3)) 2014-11-27 22:49:20.892
*** ACTION NAME:() 2014-11-27 22:49:20.892
2014-11-27 22:49:20.889716 : Start recovery for domain=0, valid=0, flags=0x4
*** 2014-11-27 22:49:24.580
Successfully allocated 32 recovery slaves
Using 3 overflow buffers per recovery slave
*** 2014-11-27 22:49:24.740
Thread 1 checkpoint: logseq 15, block 2, scn 3510749
cache-low rba: logseq 15, block 3
    on-disk rba: logseq 15, block 72, scn 3510824
start recovery at logseq 15, block 3, scn 0
*** 2014-11-27 22:49:24.981
Started resilvering redo thread 1 seq 15 blocks 72-73
*** 2014-11-27 22:49:24.994
Completed resilvering redo thread 1 seq 15
*** 2014-11-27 22:49:24.994
Started writing zeroblks thread 1 seq 15 blocks 74-81
*** 2014-11-27 22:49:24.994
Completed writing zeroblks thread 1 seq 15
==== Redo read statistics for thread 1 ====
Total physical reads (from disk and memory): 4096Kb
-- Redo read_disk statistics --
Read rate (ASYNC): 35Kb in 0.25s => 0.14 Mb/sec
Longest record: 0Kb, moves: 0/104 (0%)
Longest LWN: 2Kb, moves: 0/33 (0%), moved: 0Mb
Last redo scn: 0x0000.0035922b (3510827)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 151/176 = 0.9
*** 2014-11-27 22:49:25.007
KCRA: start recovery claims for 25 data blocks
*** 2014-11-27 22:49:25.039
KCRA: blocks processed = 25/25, claimed = 25, eliminated = 0
*** 2014-11-27 22:49:25.054
Recovery of Online Redo Log: Thread 1 Group 6 Seq 15 Reading mem 0
*** 2014-11-27 22:49:25.060
Completed redo application of 0.02MB
*** 2014-11-27 22:49:25.235
Completed recovery checkpoint
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 176/176 = 1.0
Recovery sets nab of thread 1 seq 15 to 74 with 8 zeroblks
*** 2014-11-27 22:49:26.000
2014-11-27 22:49:26.000433 : Validate domain 0
2014-11-27 22:49:26.001348 : Validated domain 0, flags = 0x0
*** 2014-11-27 22:49:28.315
Count of ofsmtab$: 0 entries
*** 2014-11-27 22:49:28.732
ORA-00942: table or view does not exist
ORA-00942: table or view does not exist
*** 2014-11-27 22:49:28.738
USER (ospid: 20381876): terminating the instance due to error 942

In my case the issue has fixed by executing the following..
grant SELECT on SYS.USER$ to XDB;
grant SELECT on SYS.USER$ to CTXSYS;
grant SELECT on SYS.USER$ to DVSYS;
grant SELECT on SYS.USER$ to LBACSYS;
grant SELECT on SYS.USER$ to APEX_040200;
grant SELECT on SYS.USER$ to DV_SECANALYST;
Refer the above screen shot...

Database startup showing ORA-00942: table or view does not exist in trace

Hi Friends,
SunOS 5.10 Generic_137112-06 i86pc i386 i86pc , 64 Bit
Oracle 10.2.0.1.0
While I am doing a startup, getting following error.
SQL> startup;
ORACLE instance started.
Total System Global Area 3221225472 bytes
Fixed Size 2122544 bytes
Variable Size 410819792 bytes
Database Buffers 2801795072 bytes
Redo Buffers 6488064 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forcedThe alert log shows the following
Errors in file /applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc:
ORA-00942: table or view does not exist
Error 942 happened during db open, shutting down database
USER: terminating instance due to error 942
Instance terminated by USER, pid = 11486
ORA-1092 signalled during: ALTER DATABASE OPEN...A look at the trace file shows this
/applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /applns/oracle
System name: SunOS
Node name: N890
Release: 5.10
Version: Generic_137112-06
Machine: i86pc
Instance name: CTSD1
Redo thread mounted by this instance: 1
Oracle process number: 23
Unix process pid: 11486, image: oracle@N890 (TNS V1-V3)
*** SERVICE NAME:() 2011-02-16 19:24:50.188
*** SESSION ID:(325.3) 2011-02-16 19:24:50.188
Successfully allocated 3 recovery slaves
Using 367 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 45929, block 2, scn 310788795>cache-low rba: logseq 45929, block 3
>on-disk rba: logseq 45929, block 52, scn 310788832
>start recovery at logseq 45929, block 3, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 24Kb in 0.31s => 0.08 Mb/sec
Total physical reads: 4096Kb
Longest record: 0Kb, moves: 0/61 (0%)
Longest LWN: 16Kb, moves: 0/3 (0%), moved: 0Mb
Last redo scn: 0x0000.128642df (310788831)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 117/121 = 1.0
*** 2011-02-16 19:24:50.515
KCRA: start recovery claims for 4 data blocks
*** 2011-02-16 19:24:50.515
KCRA: blocks processed = 4/4, claimed = 4, eliminated = 0
*** 2011-02-16 19:24:50.516
Recovery of Online Redo Log: Thread 1 Group 1 Seq 45929 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 121/121 = 1.0
ORA-00942: table or view does not existI have searched MOS and Google, but didn;'t get any relevant results.
Also flushed my shared_pool as mentioned in (http://www.tanelpoder.com/files/oracle_rowcache.pdf) after mount and started , still no luck
Any help is appreciated
Thanks
SSN

Hi,
Thanks.
Tried log mining, but still couldn't find the culprit. I think now, I have to drop and create this db.Still wondering what might have happened.
select group#,status from v$log;
    GROUP# STATUS
         1 INACTIVE
         3 INACTIVE
         2 CURRENT
SQL> select group#,MEMBER from v$logfile where group#=2;
    GROUP#
MEMBER
         2
/applns/oracle/oradata/CTSD1/redo02.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo02.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> select group#,MEMBER from v$logfile where group#=1;
    GROUP#
MEMBER
         1
/applns/oracle/oradata/CTSD1/redo01.log
         1
/applns/oracle/oradata/CTSD1/redolog001.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo01.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redolog001.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> select group#,MEMBER from v$logfile where group#=3
    GROUP#
MEMBER
         3
/applns/oracle/oradata/CTSD1/redo03.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo03.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.SSN

Using an event in table maintenance view to populate a field

I have a table maintenance view, and I would like to populate one field of the table with derived data. I am trying to do this by coding a routine for one of the events, but so far no luck. I have been able to chege the data in the TOTAL table, but still it does not populate the field on the screen.
Note this is not for one row as it is entered, but I want all rows of the table displayed to show this field with derived data.
So the question is: what is the correct event to use, and what is the correct internal table to update? Can I make changes to EXTRACT or TOTAL to do this?
Kind Regards,
Tony.

Hi Rob,
Sorry for being lazy; I'll close this and off and search :-}
BR,
Tony.

Refresh data in Table Maintenance view

Hi,
I have created a table maintenance view for db table A and added my function button to this view. When I click the button I append a few records to the table A from table B. But this recoreds are not displaied in the view.
If I rerun the view I can see added records.
How I have to refresh the view to display added records?
Regards,
Ilya

Hi Jesus,
COMMIT WORK isn't help me.
I found that I have to use TOTAL and EXTRACT structures to modify data in maintenance view.
It's fine. I do something like this in my FM
MODULE 9CUSTOM_PF_BUTTON INPUT.
lt_total[] = total[].
lt_extract[] = extract[].
CASE function.
      WHEN '9DOWNSH'.
         modify lt_total from wa_total.
         modify lt_extract from wa_extract
ENDCASE.
total[]   = lt_total[].
extract[] = lt_extract[].
ENDMODULE.                 " 9CUSTOM_PF_BUTTON INPUT
But TOTL and EXTRACT tables contain data of the current maintenance view.
I work with a view cluster and I have to append or delete records from one view if I do something in other view.
How I can modify data one view from another maintenance view?
If I have modified database tables directly I don't see changes in the view cluster.
Regards,
Malnor
Edited by: Malnor on Nov 23, 2010 9:19 AM
Edited by: Malnor on Nov 23, 2010 9:38 AM

How to clear table control view lines?

Dear Experts,
I created one ALV Report with push buttons. User can select multiple line. After select the lines, when user clicks push button in ALV, then am calling POPUP screen 1100 with save and cancel button. which ever line user selected in ALV, that will appear in the POPUP screen 1100 with table control view.
issue :
Ex :
In ALV user selected 3 lines , that appeared in POPUP screen 1100 table control view. Now user wants to select some more line in ALV. so user clicked cancel and reached ALV screen. user selected 2 more line in ALV (total 5 lines). Again user clicked same push button in ALV, But now same 3 lines (old record) are appearing in POPUP screen 1100, new records (5 lines) are not appearing.
Code :
My PBO internal table is having 5 records. but in table control only 3 records are appearing.
PROCESS BEFORE OUTPUT.
MODULE status_1100.
LOOP AT git_prq_items1 INTO gwa_prq_items1
                         WITH CONTROL ctl_pr_items.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_1100.
LOOP AT git_prq_items1.
    MODULE read_table_control. " if any changes happened in table control - read table control.
ENDLOOP.
MODULE status_1100 OUTPUT.
SET PF-STATUS ''.
ENDMODULE.                 " status_1100 OUTPUT
git_prq_items1 - this internal table is having 5 records.
Please suggest where should i correct.
Regards
chessleo.
Edited by: sapleo on May 6, 2011 9:59 AM

Hi.,
Clear the records and populate new records., also use refresh table display if u are using oo alv.
check BCALV_GRID_05 report.,
Hope this helps u.,
Thanks & Regards
Kiran

Total weight of a post item in purchase order message

Hello !
I want to write in the sapscript form used to edit the purchase order the total weight of a post item.
I found in the table EKPO the net weight, but iti is the weight of one article and not of the whole post item.
Does someone know how I can get this information (in which table or structure that is filled the MAIN element of the form) ?
I could multiply this weight by the ordered quantity but it seems not to be possible directly in the form and I want to use the standard program for my sapscript.
I precise that my form is an copy of the standard form MEDRUCK.
I thank you a lot for your help.
Regards,
Céline J.

Any idea ?

Purchase Order total weight

Hi Gurus,
I am working on an enhancement to handle the total weight of the purchase order during creation.We need to validate with few custom fields in MARA table to handle small pack and large pack materials based on container group(ZCONGR) . Based on the materials quantity we need to calculate the total weight of the order and if it exceeds 50 tonnes then we need to trigger a warning message to the user who is trying to create.
Please suggest me how can we handle this are there any enhancement where we can handle this requirement. Thanks.
Regards,
Sanjay

Suggestion:
Implement BADI ME_PROCESS_PO_CUST, put you logic in method PROCESS_HEADER.

Cannot insert PS_TXN ORA-00942 table or view does not exist

We are using jdev 11.1.1.4.0
We have two users in the database and various application modules which connect to these users using datasources
We have tested the application with applicatin module pooling enabled off to test for passivation and activation errors and the application works fine.
Also on our internal test enviorment which has more then 10 concurrent users the application works fine
But at UAT it has started suddenly to give errors Cannot insert in PS_TXN ORA-00942 table or view does not exist
When I see the data in PS_TXN tables in various users I can see that passivation has taken place for the same day when there sporadic errors have been reported all having the cause as ORA-00942 table or view does not exist.
But one strange thing that I have observed is that the COLLID column has sequence numbers interchanged for the users randomly, database user 1 has sequence number from database user 2 seq and vice a versa in COLLID
As far as this problem goes the passivation should have failed with ORA-00001 primary key voilated but that is not the case
May be the keys have still not got to a number where they collide.
But I am totally taken aback on such a behaviour and I am not sure how to correct it.
So we have two porblems here
1) why did this error come in first place PS_TXN ORA-00942 table or view does not exist
2) Why are the sequence numbers interchanged for the databse users ?
Edited by: user3067156 on Jun 19, 2012 3:12 AM

I got reply to my second question
It looks like a bug in the framework and the suggestions are to use only one ps_txn and ps_txn_seq by modifying the internal connection
But the first problem is not yet known why did it appear suddenly
Edited by: user3067156 on Jun 19, 2012 3:12 AM

Maximum "Total weight" LIKP-BTGEW in delivery

The business requirement is as follows u2013 If the Total weight LIKP-BTGEW u2013 in the delivery, at header level - is greater than X kg. Then the user cannot save the delivery (i.e. create a delivery). The user shall get a popup saying u201CDelivery can not be created / saved because the Total weight is greater than X kgu201D
Which program and userexit can I use?
Many thanks, in advance!

Hi
Related with USEREXIT_MOVE_FIELD_TO_LIKP. It's true that this subroutine was designed to provide our own additional fields. If we modify standard field (not advisable), note says:
If standard fields of the structure LIKP are changed, you may have
to carry out determinations and checks that have already been
performed again to avoid data inconsistencies. Therefore, analyze
the dependencies before you change standard fields in the table
LIKP in this exit.
It goes on:
Data from preceding documents should be prioritized and transferred
using the copy control.
so, the solution to solve it in copy rules in my opinion is the proper solution. I'm not sure if LIKP-BTGEW is populated in this moment
So, create your own subroutine (999 for instance) with a coding as this:
FORM bedingung_pruefen_999 USING bp_subrc LIKE sy-subrc.
* Perform all checks as in routine 001
perform bedingung_pruefen_001 using bp_subrc.
check bp_subrc = 0.
IF likp-btgew > your_weight.
    perform message_handling in program (programmname)
                                       using posnr_low
                                         '001'
                                         'E'
                                         'ZVL'
                                         'excess of weight'
                                         space
                                         space
                                         space.
    bp_subrc = 1.
    EXIT.
ENDIF.
ENDFORM.
where you must create your own message ZVL in SE91 or other.
Other suggestion is set a warning message in copy rules, and set the error message when you save it (think that it could be modify in a future). So use the USEREXIT_SAVE_DOC_BEFORE_PREP
Purpose
This routine can be used for the final change of all delivery data. At the
time of the call, the delivery is complete and consistent; only the
document number has not yet been determined in the creation case and the
final processing of the requirements has not yet taken place. Therefore,
changes to the delivery at this time must be made with particular care
because no subsequent checks can prevent possible data inconsistencies.
Since requirements processing has not yet occurred, this user exit is, in
particular, suitable for changes relevant for requirements when the
delivery is saved.
Remeber to avoid messages during PGI. As it says:
Display of messages
With the output of messages or user dialogs, you must make sure that this
exit can be run both in the dialog and in the background. In particular,
during goods issue posting, messages or user dialogs must never be output
because this may result in incorrect material documents.
Regards
Eduardo
Edited by: E_Hinojosa on Nov 14, 2011 12:14 PM

Table/Pivot view

Hi All
I am trying to achieve the following scenario using Table/Pivot view. Please help me on this.
For example, consider they are 40 products. I want to rank them based on Sales Amnt. Trying to create a table which shows rank of 25 products and the rest as others while the sales amount added up and display like the following:
Rank(based on Sales Amnt) - Product - Sale Amnt
1 - X - 100
2 - Y - 95
25 - Z - 60
Others - Others - (display the sum of remaining 15 products)
Grand Total - Sum of all the products Sales.
Thanks in advance!

Ok, thanks for the reply. That was really a good one. But can we do it using the table view because of performance issue

Table to view Total Weight of Shipment

Similar Messages

Maybe you are looking for