Tables of long texts

Hi Gurus:
I need to know the tables where the long texts are saved for the following:
1. Code description
2. Inspection method
3. Documentation when the result is rejected
N.B: I need the long text itself, not the indicator that a long text exist.
Regards,
MaX

Hi MAX.
Please find below tables.
Master Data QMTB Inspection method master record
Master Data QMTT Inspection Method Texts
Catalog QPCD Inspection catalog codes
Catalog QPCT Code texts
Catalog QPGR Inspection catalog code groups
Catalog QPGT Code group texts
Catalog TQ07 Follow-Up Action for Usage Decision of Inspection Lot
Catalog TQ07A QM: Function Modules for Follow-Up Action
Catalog TQ07T Language-dependent texts for Table TQ07
Catalog TQ15 Inspection catalog type index
Catalog TQ15T Language-dependent texts for table TQ15
Catalog TQ17 Defect classes
Catalog TQ17T Language-dependent texts for table TQ17
Results Recording TQ73T Texts for origin of results data
Results Recording TQ76T Texts for the processing status of insp
Results Recording TQ77 Attributes for the Inspection Characteristic
Results Recording TQ77T Text Tables for Attributes
Defects recording TQ84T Text table for confirmation profile
Defects recording TQ86 Report category for defects recording
Defects recording TQ86A Assignment report category for work center
Defects recording TQ86T Text table for report category
Defects recording V_T35 2B_F Generated table for view V_T352B_F
Regards
SANIL

Similar Messages

Insert table in long text

Hi Gurus,
My client want to insert a table in long text is it possible.
Is there any development. guide me.
regards,
sbabu

>
sbabu babu wrote:
> My client want to insert a table in long text is it possible.
1. Operating guideline
1. The Long text line connects with the PPT Long text line.
2. Pick up the Long text and heard Beep sound, LCD display u201CINSERT TABLEu201D
3. LCD displays the total amount of TABLEs.
4. LCD display recipient number when you make a call. (If the TABLEs are not enough to make a call,
in the right side it will be display last 8 numbers which you dialed).
5. After recipient side receive the Long text, user press u201CTalku201D key collect the TABLEs or automatically
collect the TABLE in the Long text, the LCD right side display the account balance, and the left side
display the need to continue to call in the amount of TABLEs after the count down.
6. 20 seconds before finish the call, there is a warning sound in the Long text, LCD display u201CInsert
TABLEu201D. It means if your want continue to talk will insert TABLEs, otherwise will stop automatically.
7. Pick up the Long text press u201C*u201D u201C#u201D with 8 numbers of passwords, can be checking the total
amount in the Long text.
8. Pick up the Long text.
Sorry, couldn't resist.
Clemens

I need to know in which table the long text is stored

Using the transaction code 'AC03' , I go to the ' Create Service Master Page '. Navigating through the page , I could see a ' long text ' button . Once it is being clicked , the white space for text entry comes .
My query is this -> <b>I need to know in which table the long text is stored and the name of the field ??</b>
If one goes to the table 'ASMDT' , one can find a field 'KZLTX' , which is a long text indicator, but not a long text storage field ...... plz help

Hi
Use the function module READ_TEXT for fetching the long text..
I came across similar situation in my project where i need to fetch the long text for Notification no.I have used the following code for fetching the Notificatin long text,you can just compare this logic and change accordingly.
      CALL FUNCTION 'READ_TEXT'
           EXPORTING
                CLIENT   = SY-MANDT
                ID       = 'LTXT'
                LANGUAGE = WA_STRUCT12-KZMLA
                NAME     = QMNUM
                OBJECT   = 'QMEL'
           TABLES
                LINES    = INT_TAB13.
Specify LANGUAGE if you wanna fetch the long text regardless of the log on lang.The resulting long text will be stored in the itab INT_TAB13 which can be defined with reference to the structure TLINE.
Hope this helps.
Regards,
Hakim

Table for Long Texts of MICs in Tasklist

Dear All
Can any body tell me from which SAP table i can get the LONG TEXT maintained for MICs in any tasklist.
Table PLMK only shows wether long text maintained or not, but i want the value in LONG TEXT.
thanks
Zeeshan

This may be helpful.
SAP stores comments (text fields) in a separate table. STXH is the text
"header" table (STXD SAPscript text file header). STXH-TDOBJECT =
'KNA1' will bring back all the customer comment headers. STXH-
TDNAME='0000010744' is the header record for the comment for customer
10744.
It is not always so simple to figure out what the TDOBJECT (object needed by function below - sometimes it is a table name, other times...), TDNAME (name needed by function below - sometimes it is a document number & line item or customer number, other times... ) & TDID (id needed by function below - it is always the long text id). There are several methods that can be used. You can create the long text that you are researching and using, SE16 for table STXH search TDLUSER = to your kerberos principal and TDLDATE = to today's date. This is modify date & user. Alternatively, you can find an existing item with the long text and figure out the date and user who last modified it and use this information in your search. Once you have STXH row for text of interest, use ZCAFTXT to test your research. Project Titles and WBS Titles are a bit more complex.
Changes to sales contract long text between 3.0F and 4.5B.
The following code is a function that will return a customer comment.
form get_comment using cur_kunnr.
call function 'READ_TEXT'
       exporting
            id                      = '0002'
            language                = sy-langu
            object                  = 'KNA1'
            name                    = cur_kunnr
       importing
            header                  = thead
       tables
            lines                   = tlinetab
       exceptions
            id                      = 1
            language                = 2
            name                    = 3
            not_found               = 4
            object                  = 5
            reference_check         = 6
            wrong_access_to_archive = 7
            others                  = 8.
if sy-subrc = 0.
    loop at tlinetab.
      write / tlinetab-tdline.
      add 1 to line_cnt.
    endloop.
endif.
endform.
The above subroutine is called with the following code:
if p_cmnt = 'X'.
   tdname = cur_cust-kunnr.
   perform get_comment using tdname.
endif.
These data elements are defined as:
data: begin of tlinetab occurs 100.    "table to process comments
        include structure tline.
data: end of tlinetab.
data: tdname           like thead-tdname.
Vishal Jonnalwar

Text table for long text of product catalog area and product description

Hi experts,
I'm a new comer in CRM, what my current job is to do the translation for CRM system and its portal, e.g. webshop. Now I met some questions as below, Could you please give me some advices?
1. Long text for product catalog area (t-code: COMM_PCAT_ADM; Product Catalog: PCSHOP)
I found a table named STXL(STXD SAPscript text file lines), maybe, it is related to the long text(product catalog area), but I can not get anything from the field CLUSTD of the table STXL as its data type is RAW. Maybe, there is a text table in CRM to store these long text information, but I dont know, Could you please give me some ideas?
2. Long text for product description (t-code: COMM_PCAT_ADM; Product Catalog: PCSHOP)
I found a table named COMM_CFGLNGTXT(Long Texts for Different Objects), I can find some long texts(product description) in this table, but some others, I can not find them. I dont know why? Maybe it is not a correct text table. Could you please give me some advices?
Thank you very much.
Quanyin

Hi Uwe,
Implement the BADI DOC_PERSONALIZE_BCS and use method PERSONALIZE_DOCUMENT. In this method therz an parameter FLT_VAL, this can be used to derive the description.
Award points if its useful....
Regards,
B Raju

Table of long texts ?

Hi everyone,
Does anyone know how to get the internal notes of a PO item WITHOUT using FM BBP_PD_PO_ITEM_GETDETAIL (table e_longtext ) ??
The performance for this FM is quite poor and as I need to get the text of all the PO's in our system for BW extraction this takes more then 24 hours...
Regards,
Ofer

Hi everyone,
Does anyone know how to get the internal notes of a PO item WITHOUT using FM BBP_PD_PO_ITEM_GETDETAIL (table e_longtext ) ??
The performance for this FM is quite poor and as I need to get the text of all the PO's in our system for BW extraction this takes more then 24 hours...
Regards,
Ofer

How to display long text in alv

Hi ,
I need to display the long text of particular object on ALV, with 30 char each line .
I have long text in one internal table, master table have one to maany relation with longtext table and long text contains 120 character in each line.
i need to display long text using 30 char in each line on alv. could you please suggest the soution ????
format is like
ponumber date         longtext
    1234    03/04/05   this is PO is created
                              for materail which have
                              shortage in plant.

hope u r expecting this..
optimize = 'X'
if u use OUTPUTLEN it is fixed size for that specific field, and also it reflects for next fields, to avoid that again have to mention OUTPUTLEN = 'X' for next field.
With OPTIMIZE = 'X' it will adjust based on the size.
regards...
santhosh reddy
Message was edited by:
        Santhosh Reddy

Purchase order item long text

Hi to all experts,
pls.help me of this requrement i need to get a table of long text of purchase order item long text .
can anybody know where long text will saved .
Regards ,
Kiran.

Here is an example.
report zrich_0001 .
data: name type thead-tdname.
data: lines type table of tline with header line.
parameters: p_ebeln type ekko-ebeln,
            p_ebelp type ekpo-ebelp.
concatenate p_ebeln p_ebelp into name.
call function 'READ_TEXT'
     exporting
          id                      = 'F01'
          language                = sy-langu
          name                    = name
          object                  = 'EKPO'
     tables
          lines                   = lines
     exceptions
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          others                  = 8.
loop at lines.
write:/ lines.
endloop.
Regards.
Rich Heilman

Probem in displaying long text

Hi,
I got the long text in ITAB1.
ITAB2 having other details which match this long text.
when iam displaying the two Internal tables,this long text is displaying one step down.How to move UP?
OBJNR        LONGTEXT
200000123            <b>{getting gap here }</b>
             AAAAAAAAAAAAAAAAAAAAAAAA
             BBBBBBBBBBBBBBBBBBBBBBBB
             CCCCCCCCCCCCCCCCCCCCCCCC
I want to display like this
OBJNR        LONGTEXT
200000123    AAAAAAAAAAAAAAAAAAAAAAAA
             BBBBBBBBBBBBBBBBBBBBBBBB
             CCCCCCCCCCCCCCCCCCCCCCCC
My code is something like this
loop at itab1.
   write:objnr
loop at itab2 where objnr = itab1-objnr.
     write:/ itab2-longtext.
endloop
endloop.
points guaranteed
cheers
kaki

OK Now I understand why you were looping at iTAB2.. try this change..
loop at itab1.
write:objnr
loop at itab2 where objnr = itab1-objnr.
if sy-tabix eq 1.
    write: itab2-longtext.
else.
    write: / itab2-longtext.
endif.
endloop.
endloop.
Regards,
Suresh Datti

Long text stored in IT 0015

Dear Experts
Can you pl let me know the table whereh long text maintained in IT 0015/0014 is stored.
My requirement is to create LSMW which will also help in maintaining the long text in IT 0015/0014
Thanks in advance for your help.
Regards
Sumit

Actualy I want ot find out in which table the long text maintained in IT 0015 is stored
( in it0015 edit -- > maintain text)
when I check table PA0015 there is a feild for text element maintained ITXEX (Text Exists for Infotype) but it only shows whether the long text is maintained or not for the infotype . it does not show the actual text maintained
I want to findout in which table does the actual text is maintained
Regards
Sumit

Database Table where modifications to message long text are stored (log)

Hi,
As per manual correction mentioned in SAP note 1144291,
we have changed the long text for message XC092 by modification of the long text.
This note 1144291 is a pre-requisite for SAP Note 1310808.
After the notes were implemented, it is noticed that message CURTO1055 has incorrect information in its long text. This is because, the variable in the long text are not correctly defined in the long text.
Both the messages XC-092 and CURTO1-055 are SAP standard.
The error for CURTO1-055 can be rectified by modification of the long text and maintenance of the correct variables.
However, my question is:
Where do we check the log for document modifcation for a message long text.
I have found the logs relevant to my modification in table DOKHL and DOKIL.
But in which table do we get all of the foll. data:
- Message class
- Message number
- Modification name
- Modification created by
- Modification done on
- Last changed by
- Last changed on
Kindly help. A <removed by moderator> solution would be really helpful.
Best Regards,
Smruthi
Edited by: Thomas Zloch on May 5, 2011 12:07 PM - urgency reduced

Hi Smruthi,
The modification changes would be in the SMODILOG table. Please note this is a core basis table and should not be changed, however to best find your changes search under the TRKORR field with the relevant tp request.
Best regards,
Derrick Hurley
Development Workench

From which table i can get the long text

Hi All
I have created some long text through function module CREATE_TEXT And i am able to see the text in the transaction .
My requirement is from which table i can get these stored long text???
Any suggestions please.
Thanks

Appreciate your answers.
I have checked the both the fields stxh as well as stxl but i am not able to find any text fields out there.
My actual requirement is some third party software needs to b mapped the table fields in order to import it.
So if i know the table fields that would be easier.
Can you tell me y we can not read it from the tables?
Thanks,
@run.

How to store long text in Rich Text Format in custom table

Hi
I have a requirement to store long text in the RTF in custom table.. Is this possible..
I am aware of a way to store them as Standard texts (SO10).. But not sure on if we can store them in tables..
Plz advise
Thanks
Geetha

Not that familiar with RTF, but you could try and create a field of type (x)string in your table and store the data there.

How to show the content of a table (long text) in a scrollable textbox?

Hi,
I have to say first, many thanks to the ones who answers to threads in this forum, it's very helpfull when we're learning web dynpro!
I have a RFC function that return a table containing a long text (node "it_text", with elements "Tdformat" and "Tdline").
1) I want first to copy all the Tdlines in a new node "text_box" (that I made specially for the screen, it contains only the element "Tdline" [the text itself]);
2) Then I want to show the content of the node "text_box" in a scrollable textbox on the screen (to show 8 lines of text, for example).
How to do that easily? What is the UI Element needed to show that?
Thanks!

If you want to display as it is then you can use Table UI element. You can change the design property to 'transparent' and set column header visibility property to none. Then you need not to write any code simple you can map the node to table field.
Even with TextEdit you can achieve what you want. Try this code...
     StringBuffer tmpBuffer = new StringBuffer();
     for(int index=0;index<wdContext.nodeLines().size();index++)
          wdContext.nodeLines().setLeadSelection(index);
          tmpBuffer.append(wdContext.currentLinesElement().getLine()+"n");
     wdContext.currentContextElement().setData(tmpBuffer.toString());
Regards
Abhilash

Reading long text from excel file to an internal table

Hi
Can any body tell me how to read long text from excel file to an internal table.
When i am using this FM KCD_EXCEL_OLE_TO_INT_CONVERT then it is reading only 32 characters from each cell.
But in my excel sheet in one of the cell has very long text which i need to upload into a internal table.
may i know which FM or what logic i need to use for this problem.
Regards

Hi,
Here is an example program. It will upload an Excel file with two columns. You could also assign the Excel structure dynamically, but I wanted to keep the example simple. The main point is that the internal table (it_excel in this example) must match the Excel structure that you want to convert.
Remember, this is just an example to help you figure out how to properly use the technique. It will certainly need to be modified to fit your requirements, and as always there may be a better way to get the Excel converted... this is just one possibility that has worked for me in the past.
*& Report zexcel_upload_test                            *
REPORT zexcel_upload_test.
TYPE-POOLS: truxs.
TYPES: BEGIN OF ty_excel,
         col_a(10) TYPE n,
         col_b(35) TYPE c,
       END OF ty_excel.
DATA: l_data_tab         TYPE TABLE OF string,
      l_text_data        TYPE truxs_t_text_data,
      l_gui_filename     TYPE string,
      it_excel           TYPE TABLE OF ty_excel.
FIELD-SYMBOLS: <wa_excel> TYPE ty_excel.
PARAMETERS: p_file TYPE rlgrap-filename.
* Pass the file name in the correct format
l_gui_filename = p_file.
* Upload data from PC
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = l_gui_filename
    filetype                = 'ASC'
    has_field_separator     = 'X'
CHANGING
    data_tab                = l_data_tab
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    OTHERS                  = 17.
IF sy-subrc <> 0.
*   MESSAGE ...
EXIT.
ENDIF.
* Convert from Excel into the appropriate itab
l_text_data[] = l_data_tab[].
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
    i_field_seperator    = 'X'
    i_tab_raw_data       = l_text_data
    i_filename           = p_file
TABLES
    i_tab_converted_data = it_excel
EXCEPTIONS
    conversion_failed    = 1
    OTHERS               = 2.
IF sy-subrc <> 0.
*   MESSAGE ...
EXIT.
ENDIF.
LOOP AT it_excel ASSIGNING <wa_excel>.
* Do something here...
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM filename_get CHANGING p_file.
*       FORM filename_get                                             *
FORM filename_get CHANGING p_in_file TYPE rlgrap-filename.
DATA: l_in_file TYPE string,
        l_filetab TYPE filetable,
        wa_filetab TYPE LINE OF filetable,
        l_rc       TYPE i,
        l_action   TYPE i,
        l_init_dir TYPE string.
* Set the initial directory to whatever you want it to be
l_init_dir = 'C:\'.
* Call the file open dialog without multiselect
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title            = 'Load file'
      default_extension       = '.XLS'
      default_filename        = l_in_file
      initial_directory       = l_init_dir
      multiselection          = 'X'
    CHANGING
      file_table              = l_filetab
      rc                      = l_rc
      user_action             = l_action
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      OTHERS                  = 4.
IF sy-subrc <> 0.
    REFRESH l_filetab.
ENDIF.
* Read the selected filename
READ TABLE l_filetab INTO wa_filetab INDEX 1.
IF sy-subrc = 0.
    p_in_file = wa_filetab-filename.
ENDIF.
ENDFORM.                    " filename_get
Regards,
Jamie

Tables of long texts

Similar Messages

Maybe you are looking for