Target URL problem!!!!!!

When I run my project
it should get the Target URL ----> http://localhost:7101/YBSprj-ybsProject-context-root/faces/index.jspx
but what I got is ----> http://localhost:7101/YBSprj-ybsProject-context-root/faces/index
How to deal with this problem?

u r running... index.jspx or adfc-config,xml..
to get index.jspx.. you have to run index.jspx
to get only index.. then yuo have to drag and drop your index.jspx inside adfx-config.xml and then run adfc-config.xml..

Similar Messages

Soap receiver target url

Hi guys,
I'm having some doubts on a soap receiver adapter.
Imagine, you use the ID to define a webservice.
Two simple synchronous interfaces, meaning, you send a string and receive another string via SOAP.
In the ID you define the comm channels, the soap sender and receiver.
My doubt is in the receiver side, you have tou specify the target URL. The problem is, how can I know the target URL, since the service will only be defined later. Meaning, I want XI to answer to a sender client which will use the WSDL generated after by the ID tool.
Where should XI answer to?
I've seen some blogs concerning some similar issues, but none concerning the problem I'm facing.
Can you guys help me or give me any hints on how to work around the problem...

Hi,
If you have a SOAP client sending a request message to XI and expecting a Response message, you need to configure SOAP sender adapter only. You do not need SOAP receiver adapter in this scenario. Sender adapter doesnt require any URL, moreover when you define a webservice in XI, you have to construct a URL where this web service can be reached.
You need the SOAP receiver adapter (where u need to mention the URL of teh service) if the receiver system exposes a webservice to which you are trying to connect from XI.
What are ur sender and receiver systems?
praveen

Session logoff with new target url using BSP_MODEL template

Hi,
I implemented the session management pages as used in ITSM. However I had some problems when calling the application in a popup (somehow the deletion of the session appears also after the 2nd start of the app deleting all my created models)
So I decided to try the slightly different pages from BSP_MODEL. Et voila problem solved.
However I have this button with:
onClientClick = "parent.exitBSPApplication( '<%= l_url %>');"
So a new problem because this is not used in the BSP_MODEL default.htm.
What did I do
1. I added a parameter to the script like in ITSM
function exitBSPApplication(newTargetUrl)
2. Copied 2 lines from the ITSM script
document.getElementById("FRAMESETID").onunload = null;
window.setTimeout('{document.location.href="'newTargetUrl'";}', 750);
This would do the trick I thought. However pressing the button results in going to the new target url, but sadly does not close the session.
I already tried to delete the 'and application->counter = 0' but this is not working either.
Any suggestions?
Greetings,
Vincent

Vincent,
It is important not to look directly at all the subtle different bits of code. Rather understand the big picture. Our test programs, for example ITSM and/or BSP_MODEL have different versions of the general principle. This just reflects different goals we wanted to achieve, etc.
The minimum you need is a frameset with onUnload hooked, and then load you application inside this. You can even delete all of that loading stuff. Just fluff.
With this, if the window (only IE!) is closed, the onunload will still terminate the session.
The button is just to demonstrate an example of how to do this when you want an explicit logoff button in your application.
One last important aspect: if you restart the same application, then they share the same cookie, and things go wrong! Effectively you can kill the new instance instead of the old one.
Coming to TechEd?

Target URLs not loading

Hello everyone.
I'm having a strange issue here that's probably going to turn out to be me just overlooking something really obvious in my HTML ... but anyway, if you can view the link below in your browser, you will see my live test site. Only two of the links (home page, sprint car pictorial) are actually linked to their respective pages at the time, but that should be enough for us to trouble shoot.
http://www.crucean.com/testSite/index.php
The problem is simple ... when you click either the "home page" or the "sprint car pictorial" links in the nav column to the left hand side of the page, the target URL doesn't load. I am using jquery here to do the drop down menu beneath the "article" link and that may be part of the problem, what with event propagation and all. Incidentally, my js code for that part is below. Any ideas what is going wrong?
// drop down menu functionality
$(document).ready(function(){
$( '#menu > li > ul' )
.hide()
.click(function( e ){
e.stopPropagation();
$('#menu > li').toggle(function(){
$(this).find('ul').slideDown();
}, function(){
$( this ).find('ul').slideUp();
I apologize if I'm asking this question in the wrong forum, but this seems the most appropriate room since my question is HTML based.
Thank you all
| scott

I'm not sure if this is the totality of your issue,however your site url is index.php, and the link to your "Home" page is index.html. You also have the html extensions on the other link. The files do not seem to be loaded to the server.
Gary

When I try to enter target URLs in my campaign on Direct CPV and click save and continue, the target URLs don't go into my target box. Do I need to do something with the settings on Firefox?

When I enter target URLs into my Direct CPV campaign, they don't carry over to my target list when I click save and continue. Is there a setting on Firefox I need to change to fix this?

I only have the problem when trying to load targets into my Direct CPV campaign.

HT3281 Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why ? I am in contact with Itunes now and they wanted screensh

Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why> ? I am in contact with Itunes now and they wanted screenshots of the problem, I can get these current tv episodes with a vpn and my isp says they are not blocking them, but i was surprised that prior to the election they were blocked, ?
I also can get them on my Android Samsung Galaxy note 2 with no problem but on the Macmini cannot>/? I Unsubscribed and subscribed many times but still no luck, any ideas? I am waiting for the senior advisor to get back to me on this issue. I am in THailand now where the problem is happening and as I said the ISP says they do not block any podcasts.I also do not want it on my iphone 5, so I have to wait and see why the mac mini is not getting it.

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

How to set Target URL in Jdeveloper 10.1.3

There is an error when i build a portlet with Jdeveloper coz Target URL is wrong
So i want to set Target URL again to referenced to localhost
( I set in hosts file:
*192.168.1.2 namdinh.com*
but when I build my portlet, Target URL still is http://192.168.1.2:8988..... )
Please show me what i must do in this case :(
Thanks so much!

Hi,
Go to Tools > Embedded OC4J Server Preferences... > Global > Startup.
Look for the options in "Host Name or IP Address Used to Refer to Embedded OC4J".
William

Target URL in the Receiver SOAP channel in PI 7.11

Hi
I have designed integrated Configuration in PI 7.11 and i have SOAP sender and SOAP receiver. SOAP sender is fine but for SOAP receiver i have an issue with the target URL that i selected.
Initially the receiver was ABAP proxy with HTTP connection as we dont have ABAP related adapters in AAE i used SOAP. But i have used the same URL that is the Target host configured in the HTTP ABAP connection to the target system. Then i am getting the following error at the receiver comm channel
Message processing failed. Cause: com.sap.aii.af.sdk.xi.util.URI$MalformedURIException: no scheme
I am sure i am doing a mistake, the URL i am using is wrong as it is not meant for SOAP calls. Please suggest me what needs to be done here.

..I am sure i am doing a mistake, the URL i am using is wrong as it is not meant for SOAP calls. Please suggest me what needs >>to be done here
You are using Integrated configuration with PI 7.1 EHP1 version. That means SOAP supports as PI native protocol (XI) for PROXY scenario. So, you have to create soap receiver adapter and choose message protocol as XI.
Integrated configuration occurs in java stack engine and XI adapter(proxy) not exists there. Only if you do classical processing (IE) then you can use XI adapter at the receiver side. Thats the reason you dont find XI adapter in the integrated configuration.
Hope I answered your question

Target URL Value in Dynamic Configuration

Hi,
1)When Dynamic Configuration is done for a receiver SOAP adapter what value has to be entered in the Target URL section of the SOAP channel?...assuming that a UDF for the same is implemented in the message mapping.
2) Also under the ASMA section for the CC what is the purpose/ meaning of Variable Transport Binding and the subsequent XHeaderName1, XHeaderName2, XHeaderName3 fields.
I have read the contents from the following:
http://help.sap.com/saphelp_nw70/helpdata/EN/29/5bd93f130f9215e10000000a155106/frameset.htm
but there is a doubt regarding the above two.
Thanks,
Abhishek.

> 1)When Dynamic Configuration is done for a receiver SOAP adapter what value has to be entered in the Target URL section of the SOAP channel?...assuming that a UDF for the same is implemented in the message mapping.
Anything you like. Maybe a default URL, or just an "x".
> 2) Also under the ASMA section for the CC what is the purpose/ meaning of Variable Transport Binding and the subsequent XHeaderName1, XHeaderName2, XHeaderName3 fields.
You have to check "Variable Transport Binding" when you use ASMA. You can leave the XHeaderNameX fields empty. They are for HTTP header fields.
Regards
Stefan

SOAP Receiver Adapter - Target URL

Hi,
We have a web service scenario, where the Sender is a III Party Java system and PI is the middleware and ECC as our receiver system. We have a wsdl binding generated from SOAMANAGER. We are using the WSDL Endpoint as the Target URL in our SOAP Receiver Adapter. The scenario works perfect with desired results.
Now that webdispatcher comes into place for load balancing and the BASIS team has given a different URL to use in the Target URL of the SOAP Reciver Adapter. The scenario throws the following eorr:-
Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 Redirect
Has anyone come acrossed such issues. Looking forward for a solution.
Thanks & Best Regards.
Kris

> Now that webdispatcher comes into place for load balancing and the BASIS team has given a different URL to use in the Target URL of the SOAP Reciver Adapter. The scenario throws the following eorr:-
>
> Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 Redirect
>
> Has anyone come acrossed such issues. Looking forward for a solution.
I wonder why your basis team is not able to help you.
It seems that the web dispatcher is not set up correctly.
http://en.wikipedia.org/wiki/HTTP_302

Is there a way to remove the changes to the URL Bar, specifically the status information and the target URL?

To begin, I utterly despise the changes to the URL Bar and the removal of the Status bar. In order to stay with the latest version of Firefox I am attempting to recreate the look and feel as best I can.
I have already installed the Status-4-Evar extension. The only thing that remains is to remove the status information and the target URL from the bar.
Are there any settings in about:config that will allow me to make these changes?
EDIT: Status information can be removed by toggling. status4evar.statusInUrlBar. Still looking for a way to remove the target URL...

This code in [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line seems to remove the links that appear on hover.
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
.urlbar-textbox-container {color: inherit !important;}
.urlbar-textbox-container-children {opacity: 1 !important;}
.urlbar-over-link-box {opacity: 0 !important;}
</nowiki></pre>
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

Dynamic Webservice Target URL

I am using Crystal Reports for Eclipse to serve up some reports for my web application. Currently, I am using JDBC datasources in which I am changing the datasource at runtime in a CrystalReportViewer where I also set some report parameters for every report that passes thru it. However, I am now switching from JDBC datasources as my data provider to webservices. The webservices work perfectly during design time. However, in my report, I have to tell it that the webservice is located at http://localhost/. When I go to deploy these reports to production servers, I need to dynamically change the target URL to something like http://myproductionserver/ at runtime. I know this needs to take place in my CrystalReportViewer, but I can't figure out how to do it there. Can someone point me in the direction I need to be going?
Thanks in advance...

Ok. I've been making a little bit of progress with this. I have added "replaceConnection" on my database controller and am changing the URLs there. However, when I do that, I get an invalid argument exception.
Here is my replaceConnection code:
private void replaceConnection(DatabaseController dbController) throws ReportSDKException
       ConnectionInfos connInfos = dbController.getConnectionInfos(null);
       for(IConnectionInfo connInfo : connInfos)
            PropertyBag pb = connInfo.getAttributes();
            String newQEServer = connInfo.getAttributes().getStringValue("PreQEServerName").replace("localhost", "BJRKQJ1-SHAW");
            String newServerName = connInfo.getAttributes().getStringValue("Server Name").replace("localhost", "BJRKQJ1-SHAW");
            String newHttpWebserviceUrl = connInfo.getAttributes().getStringValue("Http WebService URL").replace("localhost", "BJRKQJ1-SHAW");
            pb.put("PreQEServerName", newQEServer);
            pb.put("Server Name", newServerName);
            pb.put("Http WebService URL", newHttpWebserviceUrl);
            dbController.replaceConnection(connInfo, connInfo, null, DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB);
Here is the exception stack trace:
<<< ERROR - Unable to create parameter for type int32s >>><<< ERROR - detected an exception: Invalid argument
     at com.crystaldecisions.reports.common.ExceptionFactory.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.ParameterRequestHandler.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.ParameterRequestHandler.do(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
     at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
     at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.char(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.new(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.do(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.if(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.performDo(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.an.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.add(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.for(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.byte(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.replaceConnection(Unknown Source)
     at com.businessobjects.GenerateReport.replaceConnection(GenerateReport.java:322)
     at com.businessobjects.GenerateReport.createReportViewer(GenerateReport.java:213)
     at com.businessobjects.GenerateReport.generateReport(GenerateReport.java:77)
     at com.businessobjects.GenerateReport.doFilter(GenerateReport.java:57)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
     at java.lang.Thread.run(Unknown Source)
>>>
Sorry if the code gets displayed all out of whack. I can never get this thing to display correctly using the "code" with { } tags.

Issue while passing Target URL dynamically in SOAP Receiver Adapter

Experts,
I am stuck with an issue while passing the Target URL dynamically.
The UDF required for this works just fine. I can see the Target URL in Dynamic Configuration header(The Key is TServerLocation) in SXMB_MONI but the request that I am sending is not reaching the web service.
Some posts have suggested to hard code the Target URL as http://.
Below is the error that I am getting when I hard the Target URL as http://:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
When I hard code the Target URL as Test (any dummy value), the error that I get is different. (Detailed error shown below)
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: no scheme
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
I've referred the post [Dynamic URL for SOAP receiver adapter;.
I am on PI 7.0.
Any help in this regard is highly appreciated.
Best Regards,
Vijay

Issue resolved... by doing this:
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "TAuthKey");
conf.put (key2, "username");
In the advanced tab of the communication channel, set the flag "View Authorization keys", and then added "username" (user to access the dynamic target url) and the password (2 times).
That's it...

SOAP adapter and dynamic target URL

My scenario: synchronous communication ABAP Proxy <=> XI <=> External WebServices.
There is a need to have configurable (dynamic) target URL for SOAP Adapter. This target should be configurable from ABAP Proxy. Any idea how can I achieve my goal?
Some additional notes why I need configurable target URL. I've multiple WebService instances which has identical interfaces and the only difference is target URL. I see no need to define for each webservice different SOAP Adapter. The other thing is that customer want to have configuration of destination (target) url on backend system (where ABAP Proxy is used).

Check http://help.sap.com/saphelp_nw70/helpdata/EN/29/5bd93f130f9215e10000000a155106/frameset.htm
It's possible to set the URL for Soap dynamically.
To process adapter attributes in the message header of the XI message, set the Use Adapter-Specific Message Attributes indicator and the Variable Transport Binding indicator.
You can evaluate the following attributes in the message header:
Description: You can set the entire URL.
Technical name: TServerLocation

Error when setting dynamically the target URL in receiver SOAP Adapter

Hi,
I'm setting dynamically (from the mapping) the target URL in the receiver SOAP adapter:
String url = "http://mosxd30:50000/XISOAPAdapter/MessageServlet?senderParty=&senderService=DUM&receiverParty=&receiverService=&interface=SI_OA_CustomInvoiceData&interfaceNamespace=urn:repsol.com:laboratory:firma";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "TServerLocation");
conf.put(key, url);
The receiver adapter fails with:
"invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized"
Reading weblogs, etc, the most probable cause for this is a wrong target URL, but then what I did was to set it as a fixed URL in the C.Channel, and it worked, so the URL is fine.
In the communication channel, I'm using "Configure user authentication", with a user and password, and what I think it's happening is that if I use another different URL dynamically, the channel is ignoring the user authentication settings.
Any ideas?
Thanks

I forgot to say that I've checked the SAP note "FAQ Soap adapter", and it says:
Q: I get an authorization error "401 Unauthorized" from the adapter's servlet. What went wrong?
           A: The adapter's servlet is protected by default. You must use one of the user names assigned in security role xi_adapter_soap_message for component XISOAPAdapter. Please consult the documentation for Visual Administrator to view and change the security setting.
           The user authentication of the SOAP adapter is not part of the SOAP adapter but of the web container of the J2EE engine. The default authentication setting is defined in the web.xml descriptor file of the SOAP dapter web application. This setting may be modified from Visual Administrator with some restriction. Please refer to the security documentation for the J2EE engine.
           Please note that 710 onwards there is no Visual Administrator instead the Netweaver Administrator is to be used to assign the roles to the user to access the SOAP adater servlet.The user must be assigned one of the following roles SAP_XI_IS_SERV_USER, SAP_XI_APPL_SERV_USER, SAP_XI_DEVELOPER_J2EE, SAP_XI_ADMINISTRATOR_J2EE.
The target URL is a sender soap adapter (the result of one interface is sent to another one via soap adapter), and it's this one which is complaining because of the authentication I think. But I don't know why it's ignoring the user authentication flag I'm using.

Target URL problem!!!!!!

Similar Messages

Maybe you are looking for