Tcode for creating new page size in smart forms

dear friends ,
can any one tell me the tcode for creating new page size in smart forms.
thanks&regards
veerachamy

page formats?
check in SPAD.
Regards
Prabh

Similar Messages

Changing the page size in smart form

hi to all experts,
im printing barcode of size 1x3 how can i change the page format from A4 size to 1x3

hI,
it is possible to create a new page format using tcode SPAD
go to full administration from the applitool bar. go to device types tab
1) create a page format
2) under device type : include the page format in SWIN.
now go to devices/servers tab
1)create a new output device here. and use it in program.
Edited by: kat k on Feb 25, 2009 9:46 AM

Create coustom page size for Smartforms

Dear All
How to create coustom page size for smartforms.
rgds
pramod

HI
To define a new page format, choose
Administration -> CCMS -> Print->® Spool Administration.
Choose Full Administration and then Page Formats on the Device Types tab page. On the next screen choose Change and Create or Create with Reference. Fill out the fields on the next screen.
Activating a New Page Format
Before using a new page format, you must specify it as a page format in a SAPscript form. Be careful when replacing a page format in a standard SAPscript form as the form may not necessarily fit on the new page format.
You also have to define a format and device type format for the new page format before you can use it.
Thanks and Regards
Santosh Kate

HOW TO KNOW THE TCODE FOR CREATING A NEW ENTRY IN A PARTICULAR TABLE

HI,
CAN YOU PLEASE LET ME KNOW THE PROCEDURE TO GET THE TCODE FOR CREATING A NEW ENTITY IN A TABLE .
EG: IS THERE ANY PROCEDURE TO KNOW THAT IF I CREATE A NEW ENTITY IN MM01 IT WILL BE STORED IN TABLE MARA.
THANKING YOU.

Hi Venkata,
If you want to know, for a given table, which transaction/program(s) will create a new record, there is no easy procedure, other than to refer to experts who deal with these programs.
It is possible to get a list of programs that refer to a table. SE11, select the table, select the 'where-used' icon, select programs, execute. You will be presented with a list of programs that read or write to that table. From that list you would have to determine which one(s) create records, using your ABAP skills. From those selected programs you would have to find which, if any, had a transaction assigned.
Many tables are updated by more than one program/transaction. Many other tables are not updated by ANY interactive transaction.
If you ever decide to go ahead with this research, make sure you publish it. You could probably make yourself a bit of money.
Regards,
DB49

Is there a better way to edit and create a Page Size list for InDeisgn CC 2014?

I have about 65 iMac machines I'm responsible for at a publishing company. The users need a specific custom Page Size list to display when setting up a new document. It's a very long list of sizes for various products. The only way I know how to edit this size list is to open the .xml file in Dreamweaver and edit the code. I would like to know if there is a better way to do this for InDesign CC 2014. At the moment I have to take this one file and install individually on all users accounts on all 65 machines. Here is the path of the file I edit by hand: Mac HD/Users/(User Account)/Library/Preferences/Adobe InDesign/Version 10.0/en_US/Pages Sizes/New Page Sizes.xml

There is no special folder for templates. You just put them where it makes sense to you, and you access the same way you would open any existing file.
The only functional difference between a template (.indt) and document (.indd) file is the default opening behavior. By default templates open as untitled copies and documents open as originals. You can change from one to the other just by changing the file extension.
The advantage of using a template over a document size preset is the preset only defines a page size. The template can include multiple pages, multiple master pages, styles you want to use, objects already in place, etc. And the use of a template removes the temptation to "recycle" an old issue of a recurring project. Starting each issue fresh from a known clean template reduces the risk of accumulated minor corruption that can eventually cause a fatal problem.

What is procedure for creating new vendor and material master data in ABAP

What is procedure for creating new vendor and material master data in ABAP .

see below code which is used for creation of vendor master as well as extension...
*& Report ZFC_VENDOR_CREATE                                           *
REPORT ZFC_VENDOR_CREATE LINE-SIZE 100
                           NO STANDARD PAGE HEADING
                           MESSAGE-ID ZZ.
                     TABLES
TABLES : SSCRFIELDS.   " Fields on selection screens
                     CONSTANTS
DATA : C_SPLIT TYPE C VALUE '#'. " Used for Has Separator in GUI_UPLAOD
                     TYPES
Int'table to hold Vendor Master Data
TYPES : BEGIN OF TY_VENDOR_MASTER,
          FLAG TYPE C,               " Update Flag
          LIFNR TYPE LIFNR,           " Vendor Number
          BUKRS TYPE BUKRS,           " Company Code
          KTOKK TYPE KTOKK,           " Account Group
          ANRED TYPE ANRED,           " Title
          NAME1 TYPE NAME1_GP,        " Name1
          NAME2 TYPE NAME2_GP,        " Name2
          SORTL TYPE SORTL,           " Search Term 1
          SORT2 TYPE AD_SORT2UL,      " Search Term 2
          STRAS TYPE STRAS_GP,        " Street
          PSTLZ TYPE PSTLZ,           " Postal Code
          ORT01 TYPE ORT01_GP,        " City
          REGIO TYPE REGIO,           " Region
          LAND1 TYPE LAND1_GP,        " Country
          SPRAS TYPE SPRAS,           " Language
          VBUND TYPE RASSC,           " Trading Partner
          BANKS TYPE BANKS,           " Country
          BANKL TYPE BANKK,           " Bank Key
          BANKN TYPE BANKN,           " Bank Account
          BKONT TYPE BKONT,           " Bank Control Key
          BANKA TYPE BANKA,           " Name of Bank
          AKONT TYPE AKONT,           " Reconciliation Account
          FDGRV TYPE FDGRV,           " Cash Management Group
          ZTERM TYPE DZTERM,          " Payment Terms
          REPRF TYPE REPRF,           " Check Double Invoice
          ZWELS TYPE DZWELS,          " Payment Methods
          XPORE TYPE XPORE,           " Pay all items separately
        END   OF TY_VENDOR_MASTER,
Int'table to hold Vendor Extend Data
        BEGIN OF TY_VENDOR_EXTEND,
          FLAG TYPE C,               " Update Flag
          LIFNR     TYPE LIFNR,           " Vendor Number
          BUKRS     TYPE BUKRS,           " Company Code
          KTOKK     TYPE KTOKK,           " Account Group
          REF_LIFNR TYPE LIFNR,           " Reference Vendor Number
          REF_BUKRS TYPE BUKRS,           " Reference Company Code
          AKONT     TYPE AKONT,           " Reconciliation Account
          FDGRV     TYPE FDGRV,           " Cash Management Group
          ZTERM     TYPE DZTERM,          " Payment Terms
          REPRF     TYPE REPRF,           " Check Double Invoice
          ZWELS     TYPE DZWELS,          " Payment Methods
          XPORE TYPE XPORE,           " Pay all items separately
        END   OF TY_VENDOR_EXTEND,
Int'table to hold Error Records Data
        BEGIN OF TY_ERROR,
          MSG(200) TYPE C,                " To hold Message
          LIFNR    TYPE LIFNR,            " Vendor Number
          BUKRS    TYPE BUKRS,            " Company Code
        END   OF TY_ERROR.
                     DATA (Simple Fields)
DATA : W_COUNT TYPE I,               " Variable to hold count of Records
       W_SUCC_REC TYPE I,            " No. of Success Records
       W_SUCC_REC1 TYPE I,           " No. of Updated Records
       W_ERR_REC TYPE I,             " No. of Error Records
       w_noupdate_rec type i.        " No. of Records not Changed
                     INTERNAL TABLES
Int'table to hold uploaded data from File
DATA : IT_VENDOR_MASTER    TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
       WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
       IT_VENDOR_EXTEND    TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
       WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
       WA_IT_BDCDATA       TYPE BDCDATA,
       IT_BDCDATA          TYPE STANDARD TABLE OF BDCDATA,
       WA_IT_MESSTAB       TYPE BDCMSGCOLL,
       IT_MESSTAB          TYPE STANDARD TABLE OF BDCMSGCOLL,
       IT_ERROR            TYPE STANDARD TABLE OF TY_ERROR,
       WA_IT_ERROR         TYPE TY_ERROR,
       it_error_fk01       type standard table of ty_error,
       wa_it_error_fk01    type ty_error,
       it_error_fk02       type standard table of ty_error,
       wa_it_error_fk02    type ty_error,
       it_succ_rec1        type standard table of ty_error,
       wa_it_succ_rec1     type ty_error,
       it_noupdate         type standard table of ty_error,
       wa_it_noupdate      type ty_error.
                     FLAGS
DATA : FL_FLAG1 TYPE C,          " Flag to check error upload file
       FL_FLAG2 TYPE C,          " Flag to hold value
       FL_FLAG3 TYPE C,          " Flag to hold value
       FL_FLAG4 TYPE C.          " Flag to hold value
                     SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-001,
            POSITION POS_LOW.
PARAMETERS :       P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-002,
            POSITION POS_LOW.
PARAMETERS :       P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-003,
            POSITION POS_LOW.
PARAMETERS :       P_VENEXT RADIOBUTTON GROUP R1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-004,
            POSITION POS_LOW.
PARAMETERS :       P_MODE(1) DEFAULT 'N'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-005,
            POSITION POS_LOW.
PARAMETERS :       P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-016,
            POSITION POS_LOW.
PARAMETERS :       P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
                     AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Form to get file path for upload of data
PERFORM GET_FILE_PATH.
AT SELECTION-SCREEN ON BLOCK B1.
Form to Validate data specified on Selection Screen
CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
PERFORM VALIDATE_DATA.
                     START - OF - SELECTION
START-OF-SELECTION.
IF P_VENMAS = 'X'.
Form to upload data from Presentation Server for Vendor Master
    PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
    IF FL_FLAG1 NE 'X'.
      SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
      DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
                              AND   BUKRS = ' '
                              AND   KTOKK = ' '.
Form to process data for Vendor Master
      PERFORM INSERT_VENDOR_MASTER_DATA.
    ENDIF.
ELSEIF P_VENEXT = 'X'.
Form to upload data from Presentation Server for Vendor Extend
    PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
    IF FL_FLAG1 NE 'X'.
      SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
      DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
                              AND   BUKRS = ' '
                              AND   KTOKK = ' '.
Form to process data for Vendor Master
      PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
    ENDIF.
ENDIF.
                     END - OF - SELECTION
END-OF-SELECTION.
IF FL_FLAG1 NE 'X'.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O01.           " Total Number of records read :
    FORMAT COLOR OFF.
    WRITE:40 W_COUNT.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O02.           " Total Number of Success records :
    FORMAT COLOR OFF.
    WRITE:40 W_SUCC_REC.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O07.           " Total Number of Updated records :
    FORMAT COLOR OFF.
    WRITE:40 W_SUCC_REC1.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O08.           " Total Number of Unchanged records :
    FORMAT COLOR OFF.
    WRITE:40 W_noupdate_REC.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O03.           " Total Number of Error records :
    FORMAT COLOR OFF.
    WRITE:40 W_ERR_REC.
    if not it_succ_rec1 is initial.
      skip 1.
      perform display_changed_report.
    endif.
    if not it_noupdate is initial.
      skip 1.
      perform display_nochange_report.
    endif.
    IF NOT IT_ERROR IS INITIAL.
      SKIP 3.
Form to display error data
      PERFORM DISPLAY_ERROR_REPORT.
    ENDIF.
    IF FL_FLAG2 = 'X'.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/2 TEXT-O04.        " BDC Session Name for Creation (FK01) :
      FORMAT COLOR OFF.
      WRITE:40 P_GROUP.
      perform display_error_report_fk01.
    ENDIF.
    IF FL_FLAG3 = 'X'.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/2 TEXT-O09.        " BDC Session Name for Updation (FK02) :
      FORMAT COLOR OFF.
      WRITE:40 P_GROUP1.
      perform display_error_report_fk02.
    ENDIF.
ENDIF.
*&      Form GET_FILE_PATH
This form is used to get the specified path for uploading of data from
flat file with the help of F4 function key
FORM GET_FILE_PATH .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = ' '
    IMPORTING
      FILE_NAME     = P_FILE.
ENDFORM.                    " GET_FILE_PATH
*&      Form VALIDATE_DATA
This form is used to validate the data given by user on the Selection
Screen and the appropriate message is been displayed when an wrong
entry is inputted
FORM VALIDATE_DATA .
IF SY-BATCH EQ 'X'.
    CLEAR SSCRFIELDS-UCOMM.
    MESSAGE E001(ZZ) WITH TEXT-011.
    " Excel file not to be used in Batch Mode
ENDIF.
IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
    MESSAGE E001(ZZ) WITH TEXT-012.
    " Session Mode should be either A or N or E
ENDIF.
ENDFORM.                    " VALIDATE_DATA
*&      Form UPLOAD_DATA
This form is used to upload data from Presentation Server for either
Vendor Master or Vendor Extend
FORM UPLOAD_DATA TABLES P_IT_VENDOR.
DATA : L_FILENAME TYPE STRING,
         L_FILETYPE TYPE CHAR10 VALUE 'ASC',
         L_HEADER_LENGTH TYPE I VALUE 0,
         L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
MOVE P_FILE TO L_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = L_FILENAME
      FILETYPE                = L_FILETYPE
      HEADER_LENGTH           = L_HEADER_LENGTH
      READ_BY_LINE            = L_READ_BY_LINE
      HAS_FIELD_SEPARATOR     = C_SPLIT
    TABLES
      DATA_TAB                = P_IT_VENDOR
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
IF SY-SUBRC <> 0.
   MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    FL_FLAG1 = 'X'.
ELSEIF P_IT_VENDOR[] IS INITIAL.
    MESSAGE I001(ZZ) WITH TEXT-014.   " Uploaded File contains no data
    FL_FLAG1 = 'X'.
ENDIF.
ENDFORM.                    " UPLOAD_DATA
*&      Form INSERT_VENDOR_MASTER_DATA
This form is used to process BDC data for Vendor Master
FORM INSERT_VENDOR_MASTER_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR.
sort it_vendor_master by flag.
LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
    W_COUNT = W_COUNT + 1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = WA_IT_VENDOR_MASTER-LIFNR
      IMPORTING
        OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
    if wa_it_vendor_master-flag = 'A'.
    SELECT SINGLE LIFNR
           FROM LFB1
           INTO L_LIFNR
           WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
           AND   BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    IF SY-SUBRC EQ 0.
      WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
      WA_IT_ERROR-MSG   = TEXT-015.
      APPEND WA_IT_ERROR TO IT_ERROR.
      W_ERR_REC = W_ERR_REC + 1.
      CLEAR : WA_IT_ERROR, L_LIFNR.
    ELSE.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_MASTER.
      PERFORM CALL_TRANSACTION.
    ENDIF.
    CLEAR : WA_IT_VENDOR_MASTER.
    elseif wa_it_vendor_master-flag = 'C'.
      IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
        PERFORM CLOSE_BDC_SESSION.
        fl_flag4 = 'X'.
      ENDIF.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_MASTER.
      PERFORM CALL_TRANSACTION_FK02.
      CLEAR : WA_IT_VENDOR_MASTER.
    elseif wa_it_vendor_master-flag = 'N'.
      WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
      WA_IT_noupdate-MSG   = TEXT-018.
      APPEND WA_IT_noupdate TO IT_noupdate.
      W_noupdate_REC = W_noupdate_REC + 1.
      CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
    endif.
ENDLOOP.
IF FL_FLAG3 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM.                    " INSERT_VENDOR_MASTER_DATA
*&      Form POPULATE_BDC_DATA_VEN_MASTER
This form is used to populate BDC data of Vendor Master
FORM POPULATE_BDC_DATA_VEN_MASTER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_IT_VENDOR_MASTER-ZTERM
    IMPORTING
      OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
    WA_IT_VENDOR_MASTER-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
    WA_IT_VENDOR_MASTER-XPORE = 'X'.
ENDIF.
if wa_it_vendor_master-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
           BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_master-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
           BDC_FIELD USING 'BDC_OKCODE' '=MALL',
           BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-D0110' 'X',
           BDC_FIELD USING 'RF02K-D0120' 'X',
           BDC_FIELD USING 'RF02K-D0130' 'X',
           BDC_FIELD USING 'RF02K-D0210' 'X',
           BDC_FIELD USING 'RF02K-D0215' 'X',
           BDC_FIELD USING 'RF02K-D0220' 'X',
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
           BDC_FIELD USING 'LFA1-ANRED' WA_IT_VENDOR_MASTER-ANRED,
           BDC_FIELD USING 'LFA1-NAME1' WA_IT_VENDOR_MASTER-NAME1,
           BDC_FIELD USING 'LFA1-NAME2' WA_IT_VENDOR_MASTER-NAME2,
           BDC_FIELD USING 'LFA1-SORTL' WA_IT_VENDOR_MASTER-SORTL,
           BDC_FIELD USING 'LFA1-STRAS' WA_IT_VENDOR_MASTER-STRAS,
           BDC_FIELD USING 'LFA1-ORT01' WA_IT_VENDOR_MASTER-ORT01,
           BDC_FIELD USING 'LFA1-PSTLZ' WA_IT_VENDOR_MASTER-PSTLZ,
           BDC_FIELD USING 'LFA1-LAND1' WA_IT_VENDOR_MASTER-LAND1,
           BDC_FIELD USING 'LFA1-REGIO' WA_IT_VENDOR_MASTER-REGIO,
           BDC_FIELD USING 'LFA1-SPRAS' WA_IT_VENDOR_MASTER-SPRAS,
           BDC_FIELD USING 'BDC_OKCODE' '/00',
           BDC_DYNPRO USING 'SAPMF02K' '0120',
           BDC_FIELD USING 'LFA1-VBUND' WA_IT_VENDOR_MASTER-VBUND,
           BDC_FIELD USING 'BDC_OKCODE' '/00',
           BDC_DYNPRO USING 'SAPMF02K' '0130',
           BDC_FIELD USING 'LFBK-BANKS(01)' WA_IT_VENDOR_MASTER-BANKS,
           BDC_FIELD USING 'LFBK-BANKL(01)' WA_IT_VENDOR_MASTER-BANKL,
           BDC_FIELD USING 'LFBK-BANKN(01)' WA_IT_VENDOR_MASTER-BANKN,
           BDC_FIELD USING 'BDC_OKCODE' '=BANK',
           BDC_DYNPRO USING 'SAPLBANK' '0100',
           BDC_FIELD USING 'BNKA-BANKA' WA_IT_VENDOR_MASTER-BANKA,
           BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
           BDC_DYNPRO USING 'SAPMF02K' '0130',
           BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
           BDC_DYNPRO USING 'SAPMF02K' '0210',
           BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_MASTER-AKONT,
           BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_MASTER-FDGRV,
           BDC_FIELD USING 'BDC_OKCODE' '=/00',
           BDC_DYNPRO USING 'SAPMF02K' '0215',
           BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_MASTER-ZTERM,
           BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_MASTER-REPRF,
           BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_MASTER-ZWELS,
           BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_MASTER-XPORE,
           BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM.                    " POPULATE_BDC_DATA_VEN_MASTER
*&      Form BDC_DYNPRO
This form is used to move data to BDCDATA int'table
FORM BDC_DYNPRO USING PROGRAM TYPE BDC_PROG
                       DYNPRO TYPE BDC_DYNR.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-PROGRAM = PROGRAM.
WA_IT_BDCDATA-DYNPRO   = DYNPRO.
WA_IT_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM.                    " BDC_DYNPRO
*&      Form BDC_FIELD
This form is used to move data to BDCDATA int'table
FORM BDC_FIELD USING FNAM TYPE ANY
                      FVAL TYPE ANY.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-FNAM = FNAM.
WA_IT_BDCDATA-FVAL = FVAL.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM.                    " BDC_FIELD
*&      Form CALL_TRANSACTION
This form is used to Call FK01 for processing of data either for
Vendor Master or Vendor Extend. The error records are inserted to
Session which can be processed using SM35
FORM CALL_TRANSACTION .
DATA : L_OPTION TYPE CTU_PARAMS,
         L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01'
       USING IT_BDCDATA
       MESSAGES INTO IT_MESSTAB
       OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
    W_SUCC_REC = W_SUCC_REC + 1.
ELSE.
    IF FL_FLAG2 NE 'X'.
      PERFORM OPEN_BDC_SESSION.
      FL_FLAG2 = 'X'.
    ENDIF.
    PERFORM BDC_INSERT.
    W_ERR_REC = W_ERR_REC + 1.
    PERFORM ERROR_RECORD_DATA.
ENDIF.
ENDFORM.                    " CALL_TRANSACTION
*&      Form OPEN_BDC_SESSION
Form used to open session for Error out Records
FORM OPEN_BDC_SESSION .
DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
         L_GROUP TYPE APQ_GRPN.       " Variable to hold value
MOVE P_GROUP TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT              = SY-MANDT
      GROUP               = L_GROUP
      KEEP                = SPACE
      USER                = L_USERID
    EXCEPTIONS
      CLIENT_INVALID      = 1
      DESTINATION_INVALID = 2
      GROUP_INVALID       = 3
      GROUP_IS_LOCKED     = 4
      HOLDDATE_INVALID    = 5
      INTERNAL_ERROR      = 6
      QUEUE_ERROR         = 7
      RUNNING             = 8
      SYSTEM_LOCK_ERROR   = 9
      USER_INVALID        = 10
      OTHERS              = 11.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-008.              " Unable to open BDC Session
ENDIF.
ENDFORM.                    " OPEN_BDC_SESSION
*&      Form BDC_INSERT
This form is used to insert error records to a Session method
FORM BDC_INSERT .
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE            = 'FK01'
    TABLES
      DYNPROTAB        = IT_BDCDATA
    EXCEPTIONS
      INTERNAL_ERROR   = 1
      NOT_OPEN         = 2
      QUEUE_ERROR      = 3
      TCODE_INVALID    = 4
      PRINTING_INVALID = 5
      POSTING_INVALID = 6
      OTHERS           = 7.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
ENDIF.
ENDFORM.                    " BDC_INSERT
*&      Form ERROR_RECORD_DATA
This form is used to process the messages for the error records which
will be displayed on the output report
FORM ERROR_RECORD_DATA .
DATA : L_LINES TYPE I,
         L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
    CLEAR L_MSG.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = WA_IT_MESSTAB-MSGID
        LANG      = SY-LANGU
        NO        = WA_IT_MESSTAB-MSGNR
        V1        = WA_IT_MESSTAB-MSGV1
        V2        = WA_IT_MESSTAB-MSGV2
        V3        = WA_IT_MESSTAB-MSGV3
        V4        = WA_IT_MESSTAB-MSGV4
      IMPORTING
        MSG       = L_MSG
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
      WA_IT_ERROR_fk01-MSG = L_MSG.
    ENDIF.
    IF P_VENMAS = 'X'.
      WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
    CLEAR WA_IT_ERROR_fk01.
ENDIF.
ENDFORM.                    " ERROR_RECORD_DATA
*&      Form CLOSE_BDC_SESSION
Form used to close session of the Error Records
FORM CLOSE_BDC_SESSION .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-010.             " Unable to Close BDC Session
ENDIF.
ENDFORM.                    " CLOSE_BDC_SESSION
*&      Form CHK_AND_INS_VENDOR_EXTEND_DATA
This form is used to process BDC data for Vendor Extend
FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR, fl_flag4.
sort it_vendor_extend by flag.
LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
    W_COUNT = W_COUNT + 1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR
      IMPORTING
        OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
    if wa_it_vendor_extend-flag = 'A'.
    SELECT SINGLE LIFNR
           FROM LFB1
           INTO L_LIFNR
           WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
           AND   BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
    IF SY-SUBRC NE 0.
      WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
      WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
      WA_IT_ERROR-MSG   = TEXT-007.
      APPEND WA_IT_ERROR TO IT_ERROR.
      W_ERR_REC = W_ERR_REC + 1.
      CLEAR : WA_IT_ERROR, L_LIFNR.
    ELSE.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          INPUT = WA_IT_VENDOR_EXTEND-LIFNR
        IMPORTING
          OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
      SELECT SINGLE LIFNR
             FROM LFB1
             INTO L_LIFNR
             WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
             AND   BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
      IF SY-SUBRC EQ 0.
        WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
        WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
        WA_IT_ERROR-MSG   = TEXT-015.
        APPEND WA_IT_ERROR TO IT_ERROR.
        W_ERR_REC = W_ERR_REC + 1.
        CLEAR : WA_IT_ERROR, L_LIFNR.
      ELSE.
        REFRESH IT_BDCDATA.
        CLEAR IT_BDCDATA.
        PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
        PERFORM CALL_TRANSACTION.
      ENDIF.
    ENDIF.
    CLEAR : WA_IT_VENDOR_EXTEND.
    elseif wa_it_vendor_extend-flag = 'C'.
      IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
        PERFORM CLOSE_BDC_SESSION.
        fl_flag4 = 'X'.
      ENDIF.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_extend.
      PERFORM CALL_TRANSACTION_FK02.
       CLEAR : WA_IT_VENDOR_EXTEND.
    elseif wa_it_vendor_extend-flag = 'N'.
      WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
      WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
      WA_IT_noupdate-MSG   = TEXT-019.
      APPEND WA_IT_noupdate TO IT_noupdate.
      W_noupdate_REC = W_noupdate_REC + 1.
      CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
    endif.
ENDLOOP.
IF FL_FLAG2 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
if fl_flag3 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM.                    " CHK_AND_INS_VENDOR_EXTEND_DATA
*&      Form POPULATE_BDC_DATA_VEN_EXTEND
This form is used to populate BDC data of Vendor Extend
FORM POPULATE_BDC_DATA_VEN_EXTEND .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_IT_VENDOR_EXTEND-ZTERM
    IMPORTING
      OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
    WA_IT_VENDOR_EXTEND-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_extend-XPORE = 'Y'.
    WA_IT_VENDOR_extend-XPORE = 'X'.
ENDIF.
if wa_it_vendor_extend-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
           BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
           BDC_FIELD USING 'RF02K-REF_LIFNR'
                                      WA_IT_VENDOR_EXTEND-REF_LIFNR,
           BDC_FIELD USING 'RF02K-REF_BUKRS'
                                      WA_IT_VENDOR_EXTEND-REF_BUKRS,
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_extend-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
           BDC_FIELD USING 'RF02K-D0210' 'X',
           BDC_FIELD USING 'RF02K-D0215' 'X',
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
           BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_EXTEND-AKONT,
           BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_EXTEND-FDGRV,
           BDC_FIELD USING 'BDC_OKCODE' '=/00',
           BDC_DYNPRO USING 'SAPMF02K' '0215',
           BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_EXTEND-ZTERM,
           BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_EXTEND-REPRF,
           BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_EXTEND-ZWELS,
           BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_extend-XPORE,
           BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM.                    " POPULATE_BDC_DATA_VEN_EXTEND
*&      Form DISPLAY_ERROR_REPORT
This form is used to display the error records on the output screen
FORM DISPLAY_ERROR_REPORT .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O05.            " Error List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O06.            " Error List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H03,              " Error Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR INTO WA_IT_ERROR.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_ERROR-LIFNR,
           17 SY-VLINE,
           18 WA_IT_ERROR-BUKRS,
           31 SY-VLINE,
           32 WA_IT_ERROR-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_ERROR.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
ENDFORM.                    " DISPLAY_ERROR_REPORT
*&      Form CALL_TRANSACTION_FK02
Form used to Call Transaction FK02
form CALL_TRANSACTION_FK02 .
DATA : L_OPTION TYPE CTU_PARAMS,
         L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK02'
       USING IT_BDCDATA
       MESSAGES INTO IT_MESSTAB
       OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
    W_SUCC_REC1 = W_SUCC_REC1 + 1.
    WA_IT_succ_rec1-MSG = Text-017.
    IF P_VENMAS = 'X'.
      WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
ELSE.
    IF FL_FLAG3 NE 'X'.
      PERFORM OPEN_BDC_SESSION_fk02.
      FL_FLAG3 = 'X'.
    ENDIF.
    PERFORM BDC_INSERT_fk02.
    W_ERR_REC = W_ERR_REC + 1.
    PERFORM ERROR_RECORD_DATA1.
ENDIF.
endform.                    " CALL_TRANSACTION_FK02
*&      Form OPEN_BDC_SESSION_fk02
Form used to Open session for FK02
form OPEN_BDC_SESSION_fk02 .
DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
         L_GROUP TYPE APQ_GRPN.       " Variable to hold value
MOVE P_GROUP1 TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT              = SY-MANDT
      GROUP               = L_GROUP
      KEEP                = SPACE
      USER                = L_USERID
    EXCEPTIONS
      CLIENT_INVALID      = 1
      DESTINATION_INVALID = 2
      GROUP_INVALID       = 3
      GROUP_IS_LOCKED     = 4
      HOLDDATE_INVALID    = 5
      INTERNAL_ERROR      = 6
      QUEUE_ERROR         = 7
      RUNNING             = 8
      SYSTEM_LOCK_ERROR   = 9
      USER_INVALID        = 10
      OTHERS              = 11.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-008.              " Unable to open BDC Session
ENDIF.
endform.                    " OPEN_BDC_SESSION_fk02
*&      Form BDC_INSERT_fk02
Form used to insert data into BDC session using FK02
form BDC_INSERT_fk02 .
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE            = 'FK02'
    TABLES
      DYNPROTAB        = IT_BDCDATA
    EXCEPTIONS
      INTERNAL_ERROR   = 1
      NOT_OPEN         = 2
      QUEUE_ERROR      = 3
      TCODE_INVALID    = 4
      PRINTING_INVALID = 5
      POSTING_INVALID = 6
      OTHERS           = 7.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
ENDIF.
endform.                    " BDC_INSERT_fk02
*&      Form display_changed_report
Form to display Updated Vendor data
form display_changed_report .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O10.          " Updated List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O11.          " Updated List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_succ_rec1-LIFNR,
           17 SY-VLINE,
           18 WA_IT_succ_rec1-BUKRS,
           31 SY-VLINE,
           32 WA_IT_succ_rec1-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_succ_rec1.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_changed_report
*&      Form display_nochange_report
Form to display No Changed data for Vendors
form display_nochange_report .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O12.       " No Changes List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O13.       " No Changes List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_noupdate INTO WA_IT_noupdate.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_noupdate-LIFNR,
           17 SY-VLINE,
           18 WA_IT_noupdate-BUKRS,
           31 SY-VLINE,
           32 WA_IT_noupdate-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_noupdate.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_nochange_report
*&      Form ERROR_RECORD_DATA1
Form to get Error Message for Changed Vendors
form ERROR_RECORD_DATA1 .
DATA : L_LINES TYPE I,
         L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
    CLEAR L_MSG.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = WA_IT_MESSTAB-MSGID
        LANG      = SY-LANGU
        NO        = WA_IT_MESSTAB-MSGNR
        V1        = WA_IT_MESSTAB-MSGV1
        V2        = WA_IT_MESSTAB-MSGV2
        V3        = WA_IT_MESSTAB-MSGV3
        V4        = WA_IT_MESSTAB-MSGV4
      IMPORTING
        MSG       = L_MSG
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
      WA_IT_ERROR_fk02-MSG = L_MSG.
    ENDIF.
    IF P_VENMAS = 'X'.
      WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
    CLEAR WA_IT_ERROR_fk02.
ENDIF.
endform.                    " ERROR_RECORD_DATA1
*&      Form display_error_report_fk01
Form to display Error Report for Master Vendors (FK01)
form display_error_report_fk01 .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O05.     " Error List for Vendor Master (FK01)
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O06.     " Error List for Vendor Master Extended (FK01)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_ERROR_fk01-LIFNR,
           17 SY-VLINE,
           18 WA_IT_ERROR_fk01-BUKRS,
           31 SY-VLINE,
           32 WA_IT_ERROR_fk01-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_ERROR_fk01.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_error_report_fk01
*&      Form display_error_report_fk02
Form to display Error Report for changed Vendors (FK02)
form display_error_report_fk02 .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O14.     " Error List for Vendor Master (FK02)
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O15.     " Error List for Vendor Master Extended (FK02)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number

Infinite loop creating new page due to column header overflow.

i am getting an error and some pages "Infinite loop creating new page due to column header overflow. " --
using report builder 9, i have a fairly simple report - that contains 4 subreports.
for some pages i get the error - it seems if there is more data than would fit on 1 page.
smaller pages work fine.
the subreports are all simple queries and dumps....
containing page header, column header, detail sections.
page header has just a text bar of the name of the section.
column header has the field names
detail section has the data - 1 row for each row in the recordset.
nothing i do seems to change getting "Infinite loop creating new page due to column header overflow. " on a page with more than 15-20 records returned.
any ideas would be appreciated.

Try these links if you are still having the issue:
http://community.jaspersoft.com/questions/543302/receive-infinite-loop-creating-new-page-d ue-column-header-overflow-exception
http://community.jaspersoft.com/questions/500177/infinite-loop-due-page-header-overflow

How do I make it so my client can edit Links in business catalyst when they create new pages?

Okay so essentially I have built a site in Muse uploaded to business catalyst and I've setup a site template so that the client can create new pages as each new course arrives, but how do I get the link from the homepage to link to the new page? basically I need the link to be editable.
What would be ideal is a kind of portfolio layout where there is a thumbnail and a new page but for my client to be able to add a new project adn it would create a thumbnail on the homepage and a new page that he can edit. Does anyone know of something like that possible in Business catalyst?

Hi
Editing with Business Catalyst only works with image or text editing , we cannot add new page or page items using in browser editing.
However, you can manage the site from BC end when your client and login to admin and add pages, modify etc, but if you re-publish the site from Muse then then changes will be overwritten.
Thanks,
Sanjit

Clicking "page from template" does not allow me create new pages

I stared designing a site with the trial version of CS4. Of course it involved a lot of trial and error, creating a page and canceling it again etc. At last I was able to design the index page and a few other pages, but suddenly just about 7 days into the trial period, the template started looking different; not displaying the images and displaying the home page article in an improper way. I also discovered that I could not create new pages by selecting file\new. When the new document dialogue page opens and I select "page from template" and then select a site I am working on, nothing shows in the items list. I only see the message "no items". Moreover, the "create" (new page) button is no more a click-able area.
I even tried it by proceeding as if I wanted to design a new site. I click file\new\page from template\the site, but when it comes to the stage where I should select "2 column liquid, left sidebar, header and footer" after clicking “page from template” I don't see anything in the items column. It only tells me "no item."
I thought this problem was due to the fact that I was using the trial version and that the trial version was limited in the number of new pages I could create. So I bought the full version. Alas! I discovered that changed nothing. Right now am stuck. Do you have any suggestion?

I think you're are confusing DW Templates with CSS Page Designs and Starter Pages.
Templates are a DW proprietary device. They permit you to have sitewide elements such as common menus, headers and footers on all your pages along with Editable Regions for page specific content (i.e. the stuff that changes on every page).
DW Templates looks like this (notice the Template Editable Comments):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />

<title>Untitled Document</title>



</head>
<body>
My Page Specific Content Goes here

</body>
</html>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

How to create new Page Format

Hello
i want to create new page format in sap script
can any body guide to crate this & how to assign this
thnks in advance

Hi Nitin,
You can create a new page format by transaction code SPAD. Here you will have to create a cutomised page format for ex: 'ZPAGE'.
After this you will have to create a format type 'ZPAGE'. Assign the page format 'ZPAGE' to format type 'ZPAGE'. Pls make sure that both the names are identical.
Once you do that you will have to assign the format type ZPAGE to the printer which you want to use.
Now you can use this page format in your script.
Hope this helps.
Sushil

Creating new pages in iWeb

Could someone assist please with creating new pages within a page - that is if I need to follow from
a previous page with in context stuff, but I don't want a NEW page with a NEW page heading at the top.
I just want to put more stuff up under an existing page heading and using an arrow to go to new page
all in the same section. Rather than filling the top with new page headings. Sorry if I cant explain it better! Thanks - Gareth

This works for your site because it is mostly photos and you have used the Photo Page, fine. However, what you need to remember is that many people just have ordinary websites without photos who might still want to use sub pages and this method will not work for them because there are not forward and back links.
I have sub pages on my own website and basically, I created an About Us page. I have some text there, but then I have something that says find out more about these people. I did not want these other pages displayed in the main nav bar, so I took them all out and what I have done on the About Us page is use a shape with the name of the person in it and created a hyperlink to that page. You click on the relevant shape and this takes you to the page for that person - on this page I have then created a shape with Back and Forward in it - the Back hyperlink if clicked on takes you back to the About Us page and the Forward hyperlink takes you to the page for the next person etc.
If you want to create sub pages on an ordinary web site, then this is how you need to do it - you need the links on the pages that are not in the main nav bar to be able to get around the site.
You don't have those links on your site, but as it is mainly photos then this does not matter and works for you, as you go from gallery to gallery. This will not work for everyone though - horses for courses! What works for one might not work for another.

Can't get Contribute to Create New Page

Can't get Contribute to Create New Page
--Have 'tried' all options for 'new page' - button, File>,
and Ctl + N
--Have tried via each of my different websites
--CAN Edit existing pages!
--Established myself as Administrator, and Publisher
--Downloaded "Update" & ran "Repair" option
STILL Can't open a "New Page"!!!???!!!
Can anyone help?

I don't suppose you ever found an answer to this problem?
I've got exactly the same on a laptop: Desktop is absolutely
fine.
As in your case the software works 100%, but you simply can't
create a new page (across all sites). Crazy - no error message, no
nothing.
I did make the fatal error of installing a demo version of
the software before buying the real software, so I did have to go
through 6 pages of A4 instructions to try to get the read software
to install... perhaps this is a vestige of that???

Why use Dreamweaver for create web pages

Hi I am new in Dreamweaver and I want to know why use Dreamweaver for create web pages?

Twitter
http://twitter.com/altweb
Blog
http://alt-web.blogspot.com/
Site
http://alt-web.com/

I can't delete, move or create new pages.

Hello,
I have catalogue (390 pages)
Today i cant delete, move or create new pages.
When i delete, move or create new pages - my Indesign CS5.5 program "freezes"
Only with CTR: + ALT + SHIFT i can stopped my program.
Аfter reopening everything was as before!
I try to export like a *.idml file, but my program crashes! Every time!
My OS is: Windows 7
Indesign CS5.5
Please help me
Thank you!
With kind regards,
Botev Plovdiv

Is there anything at all related to this freeze in the Windows Event Viewer?
Are you able to add, remove, or move pages in a new document? Are you able to export a new document to .idml?
Yes, it is able!
It sounds like there may be a corrupt bit of text, or an image in the file. It may be possible to isolate a page, and then an object, using "Divide and Conquer."
Start with a copy of the file, for safety. Try to export the front half and the back half separately. If either half crashes, divide it in half aand try to export those halves. Repeat the process until you have isolated a page that crashes. Now remove half the objects from that page and try to export. If it works, put those back and remove the other half and try again. Repeat as above until you isolate an object.
Thank you, I will try!
After that i will back to you with my comments!
Thank you again, Peter!

How to create new page in adobe form.

how to create new page in adobe form.

Hi
First Go To Layout.
On Hicherchy Platte , rightclick on Subform and select option new body page.
This way you can create body page for the particular subform.
if you want to create master page , right click on page 1 and select New master page.
Hope this will helpful to you.
Rewards if useful.
With Regards
Nikunj Shah

Tcode for creating new page size in smart forms

Similar Messages

Maybe you are looking for