Tcp_intranet channel to accept only for a specific internal IP address

I am currently using SunOne Messaging Server v5.2:
I would like to configure our MTA to only deliver emails to their proper mailstore if the emails are from 2 specific internal IP addresses. If emails that originated from the intranet are not from the above 2 IP addresses then I would like to re-route the emails to a particular MTA(port 25) for processing. Can this be done? And if so, what changes do I need to make to the imta.cnf file/mappings file?
The tcp_local channel for outgoing emails should remain the same. My guess is that I have to modify the tcp_intranet channel to only accept from specific IPaddresses, Otherwise pass the emails to another channel or MTA for processing.
Question: Can a user spoof an Email with an improper IP address. And if so, do I have to turn on reverse lookup to stop this from happening Or is reverse lookup on by default? Where is the reverse lookup setting? In the imta.cnf file?

by default, we do examine the ip address of a mail sending partner. this is hard to spoof, and it's not based on "from" attribute.
However, I'm not at all sure that what you're asking for is truly something achieveable by any normal means, nor if it's truly useful ..
Perhaps you could create another channel for your specific ip addresses, and that would work. . .

Similar Messages

How to ignore SSL certificate warning only for a specific internal subnet?

I understand my issue may be a little unique, but I am sure some people have come across it. I am working with some test gears that have either self-signed certificates or flat out invalid/expired SSL certificates. Since this is a lab/test environment I don't want to have to go through the trouble of generating my own certificates and load them on each test device, since they come and go quite a bit.
Is there a way to tell Firefox to ignore SSL warning, but only for a given subnet? For example, if the SSL certificate is presented by anyone in 10.11.12.0/24, accept it without question, but if it's coming from anywhere else, check its validity.
I doubt this will ever be a main feature for Firefox, but perhaps someone has come across an add-on that does this?

I suggest you to ignore self signed certificates. You should get some low priced SSL certificates to prevent your website from warnings.
I preferred to buy ssl certificates from reseller, as its low pricing.
Some good resellers are:
[http://servertastic.com servertastic.com]
[https://www.sslrenewals.com SSLRenewals.com]
and you can google it for more reseller list.

How to set a MessageTextInput to be Read Only for a specific row?

Hi,
In Benefits Self Service, particularly the Update Beneficiaries page, it lists all your eligible Beneficiaries including yourself. The table has the following columns displayed for each beneficiary: Beneficiary, Relationship, Social Security Number, Primary %, Contingent %, Clear. This is the page where you allocate the Primary % and the Contingent %. The Primary % and Contingent % are MessageText Input.
We have a requirement that we wouldn't want an employee to designate himself/herself as a beneficiary. However, the employee is being listed as a beneficiary along with all the other eligible beneficiaries. Oracle says it is an intended functionality to include the employee in the beneficiary. Is there a way thru Controller Object extension to set the Primary % and Contingent % as Read Only but only for the row corresponding to the employee to prevent the employee from accidentally allocating himself/herself as a beneficiary.
I know there is the SPEL functionality but this requires me to add a transient attribute to the View Object corresponding to that table. But everytime I make a change to the View Object either by adding a transient attribute or some other changes, I end up getting an error on the standard Relation attribute of that view object. The error is something like "Relation set attribute failed for View Object". I cannot get pass this error and I'm not sure what's causing this. I see other people in this forum have encountered the same problem when extending view objects but no specific solution was offered nor any clear explanation of the cause.
So I thought if there's any way this could be done thru Controller Object extension. If so, please let me know how. The challenge for me I think is finding the bean corresponding to those Message Text Input but only for a specific row in the table.
Thanks,
Ronaldo

Hi,
I also tried extending the View Object but without changing anything to the SQL so it is exactly the same as the standard view object but I still get the "Attribute set for Relation in view object BeneficiaryPeopleVO1 failed". Based from this, extending the view object whether any change has been made or not affects the standard transient Relation attribute.
Here is the standard XML definition of the View Object if anyone is curious
<ViewObject
Name="BeneficiaryPeopleVO"
BindingStyle="Oracle"
CustomQuery="true"
RowClass="oracle.apps.ben.selfservice.enrollment.server.BeneficiaryPeopleVORowImpl"
ComponentClass="oracle.apps.ben.selfservice.enrollment.server.BeneficiaryPeopleVOImpl"
MsgBundleClass="oracle.jbo.common.JboResourceBundle"
FetchMode="FETCH_AS_NEEDED"
FetchSize="10"
UseGlueCode="false" >
<SQLQuery><![CDATA[
SELECT pcr.person_id person_id,
pen.prtt_enrt_rslt_id prtt_enrt_rslt_id,
con.first_name ||' '||con.last_name || ' ' || con.suffix Beneficiary,
con.national_identifier Ssn,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) contingent_pct,
con.person_id bnf_person_id,
con.business_group_id,
pen.per_in_ler_id,
pbn.pl_bnf_id pl_bnf_id,
pbn.object_version_number object_version_number,
pbn.effective_start_date,
pcr.contact_type contact_type,
con.full_name beneficiary_full_name,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) Db_Primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) db_contingent_pct,
DECODE(pbn.pl_bnf_id, null, 'DeleteIconDisabled', 'DeleteIconEnabled') delete_switcher,
pen.pl_id pl_id,
pen.oipl_id oipl_id,
nvl((select 'Y' from dual where (to_date(:1 , 'rrrr/mm/dd') between
          nvl(pcr.date_start,to_date(:2 , 'rrrr/mm/dd')) and
          nvl(pcr.date_end,to_date(:3 , 'rrrr/mm/dd'))) and
          (pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt))), 'N') rel_exists_flag
FROM per_people_f con,
per_contact_relationships pcr,
ben_pl_bnf_f pbn,
ben_prtt_enrt_rslt_f pen,
     ben_per_in_ler pil
WHERE pcr.personal_flag = 'Y'
AND (pbn.pl_bnf_id is not null or
(to_date(:4 ,'rrrr/mm/dd') between
nvl(pcr.date_start,to_date(:5 ,'rrrr/mm/dd'))
AND nvl(pcr.date_end,to_date(:6 ,'rrrr/mm/dd'))
          and pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt)))     --Bug 4297137
AND pcr.contact_person_id = con.person_id
and pen.person_id = pcr.person_id
AND pbn.bnf_person_id (+) = con.person_id
AND to_date(:7 ,'rrrr/mm/dd') between pbn.effective_start_date (+)
AND pbn.effective_end_date (+)
AND pcr.person_id = :8
and pen.prtt_enrt_rslt_id = :9
and to_date(:10 , 'rrrr/mm/dd') between con.effective_start_date and con.effective_end_date
and to_date(:11 , 'rrrr/mm/dd') between pen.effective_start_date and pen.effective_end_date
and pil.per_in_ler_id = pen.per_in_ler_id
and pil.per_in_ler_stat_cd NOT IN('VOIDD', 'BCKDT')
and pbn.prtt_enrt_rslt_id (+) = :12
and ((to_date(:13 ,'rrrr/mm/dd') between
nvl(pcr.date_start,to_date(:14 ,'rrrr/mm/dd')) and
nvl(pcr.date_end,to_date(:15 ,'rrrr/mm/dd'))) or
((pcr.date_start = (select max(pcr2.date_start)
from per_contact_relationships pcr2
where pcr2.contact_person_id = pcr.contact_person_id
and pcr2.person_id = pcr.person_id
and pcr2.personal_flag = 'Y')) and
not exists (select null
from per_contact_relationships pcr3
where pcr3.contact_person_id = pcr.contact_person_id
and pcr3.person_id = pcr.person_id
and pcr3.personal_flag = 'Y'
and to_date(:16 ,'rrrr/mm/dd') between
nvl(pcr3.date_start,to_date(:17 ,'rrrr/mm/dd'))
and nvl(pcr3.date_end,to_date(:18 ,'rrrr/mm/dd')))
and (pbn.pl_bnf_id is null or
exists (select null from ben_per_in_ler pil2
where pil2.per_in_ler_id = pbn.per_in_ler_id
and pil2.per_in_ler_stat_cd not in ('VOIDD','BCKDT')))
GROUP BY pcr.person_id,
pen.prtt_enrt_rslt_id,
con.last_name,con.first_name,con.suffix,
con.full_name,
con.national_identifier,
pcr.contact_type,
con.date_of_birth,
con.person_id,
con.business_group_id,
pen.per_in_ler_id,
pl_bnf_id,
pbn.object_version_number,
pbn.effective_start_date,
pen.pl_id,
pen.oipl_id,
          pcr.date_start,
          pcr.date_end,
          pil.lf_evt_ocrd_dt,
          con.date_of_death
union
SELECT to_number(null) person_id,
pen.prtt_enrt_rslt_id prtt_enrt_rslt_id,
con.first_name ||' '||con.last_name || ' ' || con.suffix Beneficiary,
con.national_identifier Ssn,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) contingent_pct,
con.person_id bnf_person_id,
con.business_group_id,
pen.per_in_ler_id,
pbn.pl_bnf_id pl_bnf_id,
pbn.object_version_number object_version_number,
pbn.effective_start_date,
'SLF' contact_type,
con.full_name beneficiary_full_name,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) Db_Primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) db_contingent_pct,
DECODE(pbn.pl_bnf_id, null, 'DeleteIconDisabled', 'DeleteIconEnabled') delete_switcher,
pen.pl_id pl_id,
pen.oipl_id oipl_id,
'Y' rel_exists_flag
FROM per_people_f con,
ben_pl_bnf_f pbn,
ben_prtt_enrt_rslt_f pen,
     ben_per_in_ler pil
WHERE
pbn.bnf_person_id (+) = con.person_id
AND to_date(:19 ,'rrrr/mm/dd') between pbn.effective_start_date (+)
AND pbn.effective_end_date (+)
AND con.person_id = :20
and con.person_id = pen.person_id
and pen.prtt_enrt_rslt_id = :21
and to_date(:22 , 'rrrr/mm/dd') between con.effective_start_date and con.effective_end_date
and to_date(:23 , 'rrrr/mm/dd') between pen.effective_start_date and pen.effective_end_date
and pil.per_in_ler_id = pen.per_in_ler_id
and pil.per_in_ler_stat_cd NOT IN('VOIDD', 'BCKDT')
and (pbn.pl_bnf_id is not null or pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt))     --Bug 4297137
and pbn.prtt_enrt_rslt_id (+) = :24
and (pbn.pl_bnf_id is null or
exists (select null from ben_per_in_ler pil2
where pil2.per_in_ler_id = pbn.per_in_ler_id
and pil2.per_in_ler_stat_cd not in ('VOIDD','BCKDT')))
GROUP BY pen.prtt_enrt_rslt_id,
con.last_name,con.first_name,con.suffix,
con.full_name,
con.national_identifier,
con.date_of_birth,
con.person_id,
con.business_group_id,
pen.per_in_ler_id,
pl_bnf_id,
pbn.object_version_number,
pbn.effective_start_date,
pen.pl_id,
pen.oipl_id
ORDER BY 3,14
]]></SQLQuery>
<DesignTime>
<Attr Name="_isCodegen" Value="true" />
<Attr Name="_version" Value="9.0.3.13.75" />
<Attr Name="_CodeGenFlagNew" Value="36" />
<Attr Name="_rowSuperClassName" Value="oracle.apps.fnd.framework.server.OAPlsqlViewRowImpl" />
<Attr Name="_objectSuperClassName" Value="oracle.apps.fnd.framework.server.OAPlsqlViewObjectImpl" />
</DesignTime>
<ViewAttribute
Name="PersonId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PERSON_ID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PrttEnrtRsltId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PRTT_ENRT_RSLT_ID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="Beneficiary"
IsQueriable="false"
IsPersistent="false"
Precision="332"
Type="java.lang.String"
AliasName="BENEFICIARY"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="Ssn"
IsQueriable="false"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="SSN"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="PrimaryPct"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Type="oracle.jbo.domain.Number"
AliasName="PRIMARYPCT"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="ContingentPct"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="CONTINGENTPCT"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="BnfPersonId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="BNFPERSONID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="BusinessGroupId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="BUSINESSGROUPID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PerInLerId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PERINLERID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PlBnfId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PL_BNF_ID"
ColumnType="$none$"
Expression="PL_BNF_ID"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="ObjectVersionNumber"
IsQueriable="false"
IsPersistent="false"
Precision="9"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="OBJECT_VERSION_NUMBER"
ColumnType="$none$"
Expression="OBJECT_VERSION_NUMBER"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="EffectiveStartDate"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Date"
AliasName="EFFECTIVE_START_DATE"
ColumnType="$none$"
Expression="EFFECTIVE_START_DATE"
SQLType="DATE" >
</ViewAttribute>
<ViewAttribute
Name="ContactType"
IsQueriable="false"
IsPersistent="false"
IsNotNull="true"
Precision="30"
Type="java.lang.String"
AliasName="CONTACT_TYPE"
ColumnType="$none$"
Expression="CONTACT_TYPE"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="30" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="BeneficiaryFullName"
IsQueriable="false"
IsPersistent="false"
Precision="240"
Type="java.lang.String"
AliasName="BENEFICIARY_FULL_NAME"
ColumnType="$none$"
Expression="BENEFICIARY_FULL_NAME"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="240" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="DbPrimaryPct"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Number"
AliasName="DB_PRIMARY_PCT"
ColumnType="$none$"
Expression="DB_PRIMARY_PCT"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="DbContingentPct"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Number"
AliasName="DB_CONTINGENT_PCT"
ColumnType="$none$"
Expression="DB_CONTINGENT_PCT"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="Relation"
IsQueriable="false"
IsPersistent="false"
Type="java.lang.String"
AliasName="Relation"
ColumnType="$none$"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="DeleteSwitcher"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="DeleteSwitcher"
ColumnType="VARCHAR2"
Expression="DeleteSwitcher"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="PlId"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PlId"
ColumnType="VARCHAR2"
Expression="PlId"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="OiplId"
IsUpdateable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="OiplId"
ColumnType="VARCHAR2"
Expression="OiplId"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="RelExistsFlag"
IsQueriable="false"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="REL_EXISTS_FLAG"
ColumnType="VARCHAR2"
Expression="REL_EXISTS_FLAG"
SQLType="VARCHAR" >
</ViewAttribute>
</ViewObject>
Thanks,
Ronaldo

Sync with Outlook ONLY for a specific date range

I have a Zire 31 that I'm syncing with Outlook via latest Palm Desktop/HotSync. I did just install the latest conduit.
I was getting several repeating calendar entries that were not syncing with the Zire (annual birthdays, etc.) - turns out that they did not have an "end-date" specified when created in Outlook. Creating an end-date solved the problem.
However - I would like to know if it is possible to specify a certain date range for the device to sync (e.g., sync calendar only for years 2007 through 2050, or in other words sync from 1 year ago to 50 years in future, etc...)
I recall specifying this once years ago, but I may have been using a third party to sync with Lotus Notes at the time. I'm wondering if this option is also available with syncing directly with Outlook using HotSync??? I can't imagine it's not, but I can't find where you specify it.
One more interesting note: while my Zire 31 had issues syncing those repeating calendar entries - my much older HandSpring Visor Deluxe syncs them no problem! Go figure.
Thanks much -
Post relates to: Zire 31

I'm not actually looking to purge old items.
Rather - I would like to ONLY sync calendar entries between a specified range of dates. For example - ONLY sync for calendar entries between Jan 1 2007 and Jan 1, 2050.
the problem is that I have some repeating entries (birthdays, etc.) that are set up in Outlook with no end date. Apparently Palm/HotSync is having trouble syncing these (they don't show up at all - for any year.)
One resolution is to apply an end-date for each repeating calendar entry. However, this is just another step my wife needs to remember to do. If you happen to forget to to this, then Hotsync will ignore that entry. Fine if you realize that's happening, but if you forget and forget to check - you won't even know it didn't sync!
The other possible resolution is to only have HotSync sync for a SPECIFIC date range - one that does not presumably go to infinity. That is my question - how does one sync ONLY for a specific date range. Has nothing to do with purging old entries.
Thanks!!
Post relates to: Zire 31

Open Posting Period only for some specific user?

Dear all,
does someone have any idea, how could a posting period in ucmon be opened only for several specific user?
Is that possible?
Many thanks.
Hallochen
Edited by: hallochen on Sep 22, 2011 2:45 PM

Depending on the requirement
May be you can open it for a specific Cons Group(assuming User has authorization for that group) which translates back to opening it for specific user only
If user needs to work on more than 1 cons groups & has authorization then a step by step approach will help
rgds
D

Interactive report gives an error only for a specific user

An interactive report based on a very complicated select gives an error only when a specific user is logged on.
The error is:
ORA-00932: inconsistent datatypes: expected - got CLOB.
For other users logging using this page it works fine.
Authentication for this application is done using a stored function.
The query does not use the current userid in it.
Why does it fail for a specific user? if there is a problem, it should fail all the time.

Hi ankur,
By what you said the report dont have any date parameters or no date columns.
"Query execution was not successful ORA-01843 not a valid month." This means it is related with date mask passing a invalid month into date column or argument to to_date function.Check once the session date that is 'dd-mm-yy' or anything else
select * from nls_session_parameters where parameter = 'NLS_DATE_FORMAT'
select to_date('01-DEC-06'),to_date('01-12-06') from dual;
Also a general question whenever I am trying to mark any question as 'Helpful', the status is not changing. Is there anything I am missing.While you flag it 'helpful' or 'correct',it takes you to other screen where you see "Yes, the question is now answered" click the radio button and then click ok button.
Hope its helpful.
Best Wishes,
Kranthi.
Edited by: Kranthi.K on Jun 8, 2009 9:00 AM

I want to set default printer settings to be used only for a specific type of application, certain documents. All other print jobs should use a different default setting for the printer.

I am printing a specific document from a web based application. This document need to be printed in landscape. So I would like to set the default settings for this specific printer to landscape. But for all other printers it should be portrait. But this does not seem to work. The browser picks the settings from the standard/default printer and uses this for all print jobs.

Embie wrote:
I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware. Great. I will replace my faulty hardware manufacturer. Simple, HP never again.
In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you. Please read this post then provide some details in a new thread. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? What is the problem you are having (with the printer...)?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

LRT224: Port Forwarding for a specific remote IP address

Hi all,
I want to create a port forwarding rule for a specific service (tcp port). But I want to ensure that only users from a specific internet IP address are able to establish a connection to this port, e.g. the remote address should be limited to 27.27.27.27.
The port forwarding configuration page does not offer a field for entering a single remote ip or ip range. Is there a way to achieve this?
Thank you for your help.
Matthias

Derfry, what you need is to configure two access rules under Firewall>Access Rules tab. One rule is to Deny all IP from accessing the service you are forwarding, and the other rule is to Allow the specific IP address.

Is it possible to make a screen control appear only for a specific patch?

I use MainStage almost exclusively for guitar. Frequently I will use different guitar amps in different patches (usually the AmpliTube plugin, but occasionally Amp Designer). I'd like to use different screen controls for specific patches. For example, I might be using a Marshall JCM900 amp model for one patch, and a Vox AC-30 Top Boost amp model for a different patch. The Marshall has a gain control, and a master volume, but the AC-30 only has a master volume. Conversely, the AC-30 has a top cut control that doesn't exist on the Marshall.
Is there a way to hide the screen control for the Marshall gain on a patch that uses an AC-30 model?
It seems like there would be many, may scenarios where controls that are relevant to one patch would be undesirable with a different patch, but it seems like screen controls are global for an entire concert. Sure, a given control can be mapped to different parameters in different patches (but you can't give a screen control different names in different patches), but there's limited space on a layout, and it seems wasteful to have to provide a given screen control that might only be relevant for one patch out of a dozen in a given set or concert visible in every single patch.

Hi
Standard Screen Controls will always appear in Edit Mod and in Perform Mode for a given Concert. Controls that are not assigned to any parameter will be grayed out in Performance Mode. To do this, select the control in Edit, and choose "None" in the Screen Control Inspector.
Smart Controls adapt for a particular Patch. Different layouts can be assigned per patch.
ericmurphysf wrote:
you can't give a screen control different names in different patches)
That depends on the method you used to name them in the first place:
Controls can have different formats of labelling ( done in Layout mode), where they can show the particular parameter name etc etc. These can change from patch to patch.
You can assign a "Hardware Label" that is global.
Separate Text labels can have global or Set/Patch labels, and they can be labelled for a single Patch by overriding any higher level labelling
hth
CCT

Override JDBC driver in 9.0.4 only for a specific application

Hi,
on of our customers runs an OAS 10g (9.0.4.0.0) that originally ships with the very old classes12dms.jar as the Oracle JDBC Driver. Now for various reasons we cannot use this driver for our newly developed application but expect an up2date JDBC driver to be used instead.
I've found a couple of references in the forums pointing to this metalink article:
"JDBC Driver Upgrade Notes in OC4J/OracleAS"
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=275645.1
However, we cannot use the process described in there because it describes how to update the driver globally but we are not able to globally update the driver in order to ensure that existing applications on the server are not influenced by our driver update.
So is there a way to make this application specific? I do have some weblogic experience and I know that it is doable there, so I guess there should be a way in OAS as well ... hopefully :-)
tia
Udo Rader

Thanks. I got this patch # from MetaLink and applied the same. Now I get the following error:
Error encountered initializing
users and groups using the specified user manager. com.evermind.sql.DataSourceUserManager does not support the operations needed to populate
this page.. getGroupCount() is not supported by this UserManager
Trace
=====================
2004-03-26 16:39:57,481 [HttpRequestHandler-18670253] ERROR ias.ErrorData errHandler.62 - error during page render Error encountered initializing
users and groups using the specified user manager. com.evermind.sql.DataSourceUserManager does not support the operations needed to populate
this page.. getGroupCount() is not supported by this UserManager
oracle.sysman.emSDK.admObj.AdminObjectException: Unsupported operation exception encountered
at oracle.sysman.ias.sta.oc4j.UserMgrAdmin.initGroups(UserMgrAdmin.java:742)
at oracle.sysman.ias.sta.oc4j.UserMgrAdmin.getGroupsFromUserMgr(UserMgrAdmin.java:138)
at oracle.sysman.ias.sta.oc4j.AppSecurity.getGroupsData(AppSecurity.java:664)
Caused by: java.lang.UnsupportedOperationException: getGroupCount() is not supported by this UserManager
at com.evermind.security.AbstractUserManager.getGroupCount(AbstractUserManager.java:222)
at oracle.sysman.ias.sta.oc4j.UserMgrAdmin.initGroups(UserMgrAdmin.java:730)
... 207 more
java.lang.UnsupportedOperationException: getGroupCount() is not supported by this UserManager
at com.evermind.security.AbstractUserManager.getGroupCount(AbstractUserManager.java:222)
at oracle.sysman.ias.sta.oc4j.UserMgrAdmin.initGroups(UserMgrAdmin.java:730)
at oracle.sysman.ias.sta.oc4j.UserMgrAdmin.getGroupsFromUserMgr(UserMgrAdmin.java:138)
at oracle.sysman.ias.sta.oc4j.AppSecurity.getGroupsData(AppSecurity.java:664)
====================================
Where do I go from here?

Imovie won't let me "export as quicktime". It is only for one specific project, all others work fine

When I choose the option "export using quicktime", it starts the export and then just stops - no error message. It works for all my other projects, but not this specific one - any ideas what could be wrong? Fairly desperate as I am supposed to show this tomorrow!

When I choose the option "export using quicktime", it starts the export and then just stops - no error message. It works for all my other projects, but not this specific one - any ideas what could be wrong? Fairly desperate as I am supposed to show this tomorrow!

HT204407 I can't delete someone from my find my friends. Every time I try I get a message that says "find my friends in unavailable due to a server error. This has been going on for a month. But only for this specific friend. I can delete

I can't remove a specific person from find my friends. Everyone else I can, but when I try to remove THIS person I get a message saying there is a server error from Find my Friends.

The problem was resolved by erasing the entire contents of my phone and then restoring it, setting it up as a new phone.

User Defined Fields are read-only for a specific user

I have a user that has lost her ability to edit user defined fields. They are all grayed-out for all UDFs, all document types. Other users have access to these fields. I've even copied the authorizations from a user not experiencing the problem, but with no positive results. Anyone have any thoughts on this?
We are on SBO 8.8 PL 16

Hi Randy......
This might be the Authorisation issue......
Please check properly whether you have given Full authorisation for Form Setting to such user or not and check by enabling it through Form Setting
Regards,
Rahul

Fixed dial for one specific international number suggestion required

Hi,
We have a requirement that one of our client require to configure one fixed number like 6666 for one international Help-desk number. In CUCM, they want to configure this number. Second thing they are acquiring, is it possible that when any person dial 6666 call goes out respectively from their local router. Not from their HO router.
Regards,
Humza Khan

Hi,
I tried with translation pattern, call is routing from HO router, not from remote side router. I assigned css which contains outbound calls partitions of all remote & HO sides. But all in vain.
Any Suggestions.
Regards,
Humza Khan

[CC] How to perform a script "foo_beforeSave.htm" only for specific site?

Since a long time I use a script for automatic text replacements which perform with each save command.
The script sits in that folder:
C:\Users\myusername\AppData\Roaming\Adobe\Dreamweaver CC\de_DE\Configuration\Commands\foo_beforeSave.htm
It works for all documents of all sites.
The source code (the regex rule is just an example) of the script you find below.
My question:
I like to perform a script like this only for a specific site.
I'm not a programmer. So I don't know where to place the script to reach that target. Or how I have to edit the source code of the script.
Is there anybody who could help me with that please?
I would appreciate it a lot. Thanks
<!DOCTYPE HTML SYSTEM "-//Macromedia//DWExtension layout-engine 5.0//dialog">

<html>
<head>
<title></title>
<script src="../Shared/Common/Scripts/dwscripts.js"></script>
<script>
function canAcceptCommand(){
    return true;
function getFileName(url) {
var index = url.lastIndexOf('/');
if (index != -1) retVal = url.substring(index + 1);
else retVal = url;
return retVal;
function runCmd(){
    var dom = dw.getDocumentDOM();
    dom.synchronizeDocument();
    var path = dw.getDocumentPath('document');
    if(getFileName(path) != 'foo_beforeSave.htm'){
        var docEl = dom.documentElement;
        var tempDoc = docEl.outerHTML;
        tempDoc = tempDoc.replace(/&bdquo;/g,'„');
        tempDoc = tempDoc.replace(/„/g,'„');
        tempDoc = tempDoc.replace(/“/g,'“');
        tempDoc = tempDoc.replace(/“/g,'“');
        tempDoc = tempDoc.replace(/”/g,'”');
        tempDoc = tempDoc.replace(/”/g,'”');
        docEl.outerHTML = tempDoc;
</script>
</head>
<body onLoad="runCmd();">
</body>
</html>

Well, the posted script is a full working one.
I just search for a way to limit the range of the script to the actual site.
Therefore it is unimportant, which regex is in the example.

Tcp_intranet channel to accept only for a specific internal IP address

Similar Messages

Maybe you are looking for