Telnet, rlogin, ssh not ok on sun 240 with solaris 5.10 on it

Hello,
I am facing some problems with connecting througth telnet, rlogin or ssh on a SUN 240 server carying solaris 10 software on it. When I try to connect througth the serial port, it gives me this error:
telnet 10.151.145.6 2100Trying 10.151.145.6...
Connected to 10.151.145.6.
Escape character is '^]'.
rel4gold_sam_1_7_1 console login: Dec 22 18:21:33 rel4gold_sam_1_7_1 uplink: uplink1: Standby link failure - not receiving heartbeats (B)
Dec 22 18:23:33 rel4gold_sam_1_7_1 last message repeated 1 time
INIT: Command is respawning too rapidly. Check for possible errors.
id: cn "/opt/CCPUsrvr/bin/ccnd -s 38400 -f none -l /dev/term/b #CCPU CCNd"
Dec 22 18:25:34 rel4gold_sam_1_7_1 uplink: uplink1: Standby link failure - not receiving heartbeats (B)
rel4gold_sam_1_7_1 console login: root
Dec 22 18:25:51 rel4gold_sam_1_7_1 login: open_module: /usr/lib/security/pam_authtok_get.so.1 failed: ld.so.1: login: fatal: passwdutil.so.1: open failed: No such file or directory
Dec 22 18:25:51 rel4gold_sam_1_7_1 login: load_modules: can not open module /usr/lib/security/pam_authtok_get.so.1
Ping is working properly. Do you have any ideea how can i fix this problem?
Thank you.

Yeahh, guys!!!
I was trying to establish a two-node cluster using VirtualBox + Solaris x86 + Sun Cluster 3.2. The node where I was running scinstall to configure my cluster environment was rebooting the other node in the end of the configuration process but it was hanging in the "Rebooting node01..." message just because it was not able to establish the cluster.
After see your comments, I changed Solaris x86 to Solaris Express Community Edition and Sun Cluster to Cluster Express and now everything is working fine!
Thanks!
Jansen Sena <[email protected]>

Similar Messages

Sun LDAP with Solaris

Hi All,
i have very simple and short query, Is Sun Directory comes bundled with Solaris 10 ? or we need to download explicitely.
If we download that is a free version or we need to procure.
Thanks
Avninder

Hi Avninder,
No it does not come with Solaris 10, nor Solaris 10 current license gives you entitlement with support for it.
Please go and download from www.sun.com/dsee
Etienne

Installing 8i on Sun E250 with Solaris 8.. if you did it, tell me how!

I have been struggling with the brand new load of 8i on our Sun platform. It is or was a clean box when I started... and looking through the help, looks like other folks have the same problem I have.
I may be wrong, but the installation document is not the most clear reading document I have ever taken a gander at!
Got the ORA-03114 Can't connect to ORACLE error.
Any help in this endeavor will be greatly appreciated, and of course, I can't pay you with real dollars, but the bows and scrapes I present as you walk by will be unheralded.
Thanx in advance,
JB

first rename the downloaded file to 817solaries.cpio.gz thru mv command
then execute this
gunzip 817solaries.cpio.gz; cat 817solaries.cpio | cpio -icd
this will unzip your file into Disk1 directory then change directory to Disk1 and execute runInstaller from there

Not able to telnet or ssh to outside interface of ASA and Cisco Router

Dear All
Please help me with following question, I have set up testing lab, but still not work.
it is Hub and spoke site to site vpn case, connection between hub and spoke is metro-E, so we are using private ip for outside interface at each site.
Hub -- Juniper SRX
Spoke One - Cisco ASA with version 9.1(5)
spoke two - Cisco router with version 12.3
site to site vpn has been successful established. Customer would like to telnet/ssh to spoke's outside ip from Hub(using Hub's outside interface as source for telnet/ssh), or vise versa. Reason for setting up like this is they wants to be able to make configuration change even when site to site vpn is down. Sound like a easy job to do, I tried for a long time, search this forum and google too, but still not work.
Now I can successfully telnet/ssh to Hub SRX's outside interface from spoke (ASA has no telnet/ssh client, tested using Cisco router).
Anyone has ever done it before, please help to share your exp. Does Cisco ASA or router even support it?
When I tested it, of cause site to site vpn still up and running.
Thanks
YK

Hello YK,
On this case on the ASA, you should have the following:
CConfiguring Management Access Over a VPN Tunnel
If your VPN tunnel terminates on one interface, but you want to manage the ASA by accessing a different interface, you can identify that interface as a management-access interface. For example, if you enter the ASA from the outside interface, this feature lets you connect to the inside interface using ASDM, SSH, Telnet, or SNMP; or you can ping the inside interface when entering from the outside interface. Management access is available via the following VPN tunnel types: IPsec clients, IPsec LAN-to-LAN, and the AnyConnect SSL VPN client.
To specify an interface as a mangement-only interface, enter the following command:
hostname(config)# management access management_interface
where management_interface specifies the name of the management interface you want to access when entering the security appliance from another interface.
You can define only one management-access interface
Also make sure you have the pertinent configuration for SSH, telnet, ASDM and SNMP(if required), for a quick test you can enable on your lab Test:
SSH
- ssh 0 0 outside
- aaa authentication ssh console LOCAL
- Make sure you have a default RSA key, or create a new one either ways, with this command:
*crypto key generate rsa modulus 2048
Telnet
- telnet 0 0 outside
- aaa authentication telnet console LOCAL
Afterwards, if this works you can define the subnets that should be permitted.
On the router:
!--- Step 1: Configure the hostname if you have not previously done so.
hostname Router
!--- aaa new-model causes the local username and password on the router
!--- to be used in the absence of other AAA statements.
aaa new-model
username cisco password 0 cisco
!--- Step 2: Configure the router's DNS domain.
ip domain-name yourdomain.com
!--- Step 3: Generate an SSH key to be used with SSH.
crypto key generate rsa
ip ssh time-out 60
ip ssh authentication-retries 3
!--- Step 4: By default the vtys' transport is Telnet. In this case,
!--- Telnet and SSH is supported with transport input all
line vty 0 4
transport input All
*!--- Instead of aaa new-model, the login local command may be used.
no aaa new-model
line vty 0 4
login local
Let me know how it works out!
Please don't forget to Rate and mark as correct the helpful Post!
David Castro,
Regards,

Telnet or ssh management

Hi Everybody!!!
I have noticed that I can log in using almost every configured IP address on the device (here Catalyst 6500).
I'm wondreing why? I'm not talking about source address, but the destination one.
I have many vlan interfaces configured on the device. Almost every interface has assigned an IP address.
And I can access remotely the switch using telnet or ssh protocol using every assigned IP address to Vlan interfaces.
I'm wondering if it is desirable.
Could someone explain it to me.
Maybe there is a way to reduce the number of possible addresses, which I can use to log in (destination address).
Best regards,
Agata Czekalska
Technical University of Lodz

Hi
Hmm Technical University..
I am basing this on a couple of asumptions.
Assumption: this is one of the devices that services students/teachers/others
Assumption: students are intelligent and inquisitive.
Assumption: you are the only one/group that should have access to the device.
First your 6500 chassi is/are available on several different VLANS.
this I would stop at once IF there is no special reason for it to be configured that way.
My guess is that if it is not hacked, then it is not far from getting just that.
it does not mean that someone is doing anything malicious with it, but there might be misconfigurations and stuff that disrupts service.
I would actually if possible stop all telnet/ssh/http/https traffic to the device itself.
Atleast stop telnet and http since they send the login information in cleartext.
if the student have a sniffer they will have the loginnames and passwords quickly.
Get a firewall (asa5505?), and setup a pc behind it with a direct connected serial cable to the 6500 (and other switches maybe ?) to connect to the pc you would then open up the firewall only for appropriate communication means (ipsec vpn/ssl vpn/AAA TCP communication)
use personal usernames and passwords so that everyone have their own username and password to login to the equipment.
dont forget to set up NTP. that will help not only with time, it will also help with who was last on.
This method secures the device from malicious use or accidental missconfiguration from someone not authorised to use it in that way.
if this is not possible or desireable in your case, ACLs are used to control what ip address are allowed to access the unit.
HTH

How to enable rsh/telnet/rlogin

Hi Followed the instructions at:
http://docs.info.apple.com/article.html?artnum=106274
to enable rsh/telnet/rlogin services, and restarted the
machine (MacBook Pro, OS X 1.4, Darwin Kernel Version 8.6.1).
Still I can't remotely do telnet/rsh/rlogin to the mac
(get conenction refused error) from a Unix machine.
Could someone tell me how to enable these services
(right now ssh is the only one enabled by default,
the machine is within a firewall, and for some applications,
we need to enable rsh/rlgoin/telnet/ftp etc).
Thanks.
Macbook Pro Mac OS X (10.4)

Hi Followed the instructions at:
ttp://docs.info.apple.com/article.html?artnum=106274
to enable rsh/telnet/rlogin services, and restarted
the
machine (MacBook Pro, OS X 1.4, Darwin Kernel Version
8.6.1).
Still I can't remotely do telnet/rsh/rlogin to the
mac
(get conenction refused error) from a Unix machine.
If your firewall is activated
then you have to add 3 new filter rules:<pre>
Port Name: Other
TCP Port Number(s): 514
UDP Port Number(s):
Description: rsh
Port Name: Other
TCP Port Number(s): 513
UDP Port Number(s):
Description: rlogin
Port Name: Other
TCP Port Number(s): 23
UDP Port Number(s):
Description: telnet
</pre>
You don't have to restart your Mac or your session.
You could test it pretty quickly by doing a:<pre>
telnet localhost
rlogin localhost
rsh localhost pwd
</pre>
dan

Telnet vs ssh?

i have a webserver in my basement without a keyboard, monitor or mouse permanently attached to it. so maintaining it is rather difficult. so i've been looking at setting up telnet or ssh on it (which i should have done from the start) so i can manage it from another machine within my network
now i understand that telnet lacks any type of security, and i'm only using it behind my network anyway. but my concern is if i want to log into it from outside my network through my vpn. i use openvpn, so i'm asking, because i'm not sure the vpn connection is encrypted or not, and if its not, then ssh will be the way to go, otherwise i think telnet is just easier.

.:B:. wrote:If 'minimal' updates mean what I think it means, then you're only making yourself miserable. Partial updates will break the system; it's a rolling release and often updates depend on one another. Doing 'minimal' updates is not the way to go. If you're afraid stuff breaks, pick another distro, or try the Arch Server Project, or at least install an LTS kernel like gazj did.
i didn't mean minimal updates like that, i just meant that i don't update it very often. i do run the lts kernel. i just don't update everything else too often out of the blue like that because its setup and working. i ran into issues with mysql one time when i just went ahead and updated, had trouble getting it going right. so i like to plan my downtime and try to know what to expect. so instead of planning to have it down for 10 minutes, and having that turn into an hour, i can plan for an hour if thats what i know it will take.

Import netscape.ldap.* ; is it not supported in Sun one LDAP server

import netscape.ldap.*;
is the above line not supported n Sun One LDAP directory Server
if that is the case what should i do
wenever i compile my code the error tat comes up is : package netscap.ladp does not exists
need help immediately
my code is as follows
import netscape.ldap.*;
import java.util.*;
* Simple search program to experiment with filters
public class SearchFilter {
* Do a subtree search using a specified filter
* @parm args host, port, authDN, password, baseDN, filter
public static void main(String[] args) {
if (args.length != 6) {
System.out.println("Usage: java FilterSearch " + "<host> <port> " + "<authdn> <password> " + "<baseDN> <filter>");
System.out.println("Example:");
System.out.println(" java FilterSearch " + "localhost 389 " + "\"\" \"\" " + "\"o=airius.com\" " + "\"(|(cn=sam*)(cn=b*))\"");
System.exit(1);
}

Couldn't you download the netscape.ldap package (iPlanet LDAP SDK) and put its jars in your app classpath?
The suggested way to replace netscape.ldap package is to use only JNDI calls, but maybe they can not fulfill all your needs.
By the way, you can get the source code for that package in Mozilla.org site.
(Note: if you are using Netscape LDAP SDK for parsing/generating ASN.1 streams including X.509 certificates, try using BouncyCastle instead of netscape.ldap.ber.stream package - I had to modify several classes from Netscape's package that is not meant to handle certificates, but LDAP streams...)

Inetd services (telnet, rlogin ,rsh) in Solaris 9 Branded Zone

Hi,
I've got two Solaris 9 Branded Zones running on an M3000. They both use exclusive IP.
When I try and telnet, rlogin or rsh to either of my Solaris 9 zones from the other I get an error. With the r* commands I get a "Protocol error" message, and telnet just reports a terminated connection. I've tried Mr. Google, the results I get make sense for a physical host - i.e Protocol Error would occur if the server executable (in.rlogind, etc) was somehow messed up.
Just to complicate things slightly the exclusive IP NICs are on a physically separate switch from the other NICs.
I'd forgotten that with the Branded Zones some native features are actually handled by the underlying global zone (i.e. Solaris 10).
Anyway, has anybody else had this same problem and how did you resolve it?
Thanks
Tim Shaw.

I found out that the services in the Global Zone had been disabled. Simply enabling them fixed the problem :)

Ssh not responding to the assigned pw

ssh not responding behavely
Dont know what security parameter that needs modifying.
If I use a the techia ssh, the session between client and server has no problem.
but if i use the default ssh server embeded in solaris 10 with techia ssh client, They do meet (handshake) but the password being provided is not acceptable.
Is there a specific ssh client for solaris 10? Here's what I got during ssh in solaris with techia ssh client
Enter your authentication response
Password:
[OK] [Cancel]
any advise?
Edited by: milotasteslikeovaltine on Jul 29, 2008 9:15 PM

never heard of techia (perhaps tectia?)... i havent found a free windows client that doesnt work: [http://freessh.org/]
has your solaris sshd config been changed?

Linux Issue - Could not initialize class sun.print.CUPSPrinter

Afternoon All,
I am using the latest CR4Ev2.
Java 1.6 (Am very sure but will double check)
My Windows enviroment is all working perfectly and so have moved my application over to a Linux setup.
After solving all my case-sensitivity issues I have managed to get my reports almost working. (I hope almost)
When the following code is run:
reportClientDocument = new ReportClientDocument();
reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
reportClientDocument.open(reportFilePath,OpenReportOptions._openAsReadOnly);
I get the below error messages in my logging.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Could not initialize class sun.print.CUPSPrinter---- Error code:-2147467259 Error code name:failed
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(SourceFile:286)
     at com.businessobjects.sdk.erom.jrc.a.<init>(SourceFile:43)
     at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:46)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.<init>(SourceFile:703)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632)
     at com.crystaldecisions.sdk.occa.report.application.ClientDocument.if(SourceFile:504)
     at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(SourceFile:669)
Now it could just be as simple as we dont have a printer setup on that box.
Is this a definate requirement. Does the server have to have a printer setup, even if we are only exporting to PDF files.
I am still doing some testing and since it is the first time getting this far on Linux it might be mistakes on my side,
but thought I would ask the wide world and see what replies I get back.
Cheers
Darren
Edited by: Darren Jackson on Mar 10, 2010 11:12 AM
Sorry for the bump but wanted to change the subject to something more enticing

After many many hours of reading and pulling my hair out I have found a solution to my problem,
Whether it is a valid solution or a workaround or a cheat I am hoping someone can tell me.
If I run my application with the switch
java -jar -Djava.awt.headless=true MyApp.jar
It works.
Now I am still doing some investigation on what exactly this headless switch is doing. But it works so I am happy.
If anyone can give me a technical and or a laymans explanation that would be great.
All I have to do now is solve my Font issue
Cheers
Darren

Could not initialize class sun.awt.X11.XToolkit

hi all
String fileName = "c:/test/one.jpg";
Image imgg = Toolkit.getDefaultToolkit().getImage(fileName);
ImageIcon img = new ImageIcon(imgg);
imgDim = ""+img.getIconHeight();
when i run this code in linux machine am getting the error Could not initialize class sun.awt.X11.XToolkit....but its runnig on windows machine.. is there anything wrong wiht my code........pl help me any1 out of dis

here http://rapid-i.com/rapidforum/index.php?topic=366.0
they talk about adding to the JVM options a "-Djava.awt.headless=true"

Class not found com/sun/java/util/collections/list

hi
          i am trying to execute the following:
          java weblogic.jspc -d c:\weblogic\classes -keepgenerated
          printAllParameters
          and get the follwoing message:
          class not found com/sun/java/util/collections/list
          any suggestions?
          thanx


Try it like this:
          java weblogic.jspc -d c:\weblogic\classes;c:\weblogic\lib\weblogicaux.jar ...
          Melrose Public Library <[email protected]> wrote:
          > hi
          > i am trying to execute the following:
          > java weblogic.jspc -d c:\weblogic\classes -keepgenerated
          > printAllParameters
          > and get the follwoing message:
          > class not found com/sun/java/util/collections/list
          > any suggestions?
          > thanx
          Dimitri

Is Java3D not supported by sun anymore?

Hi i was just reading a thread in this forum that said that java 3d is not supported by sun anymore. Can somebody please confirm for me. This is the thread:
http://forum.java.sun.com/thread.jsp?forum=21&thread=459570&tstart=0&trange=15

You have got to read all of these to understand what is going on:
http://www.javagaming.org/cgi-bin/JGNetForums/YaBB.cgi?board=3D;action=display;num=1061958762
http://www.javagaming.org/cgi-bin/JGNetForums/YaBB.cgi?board=3D;action=display;num=1058255120
http://www.javagaming.org/cgi-bin/JGNetForums/YaBB.cgi?board=3D;action=display;num=1055974647
http://forum.java.sun.com/thread.jsp?forum=21&thread=409799&tstart=150&trange=30
Regards
Nikolai

SOMETIMES - Could not load com.sun.xml.messaging.saaj.soap.Envelope

Hi there,
Well, it is mysterious - not to say frightning !
When I first start my tomcat I get an Exception like:; Could not load com.sun.xml.messaging.saaj.soap.Envelope
The second time it runs well. No Exception about classloading. And the app is nice.
Hmm, why ? Can�t find out.
I think that Exception has to have some relation to jars and where they are placed.
According to the JAXWS-page I placed:
jaxb-api.jar, jaxws-api.jar, jsr173_api.jar, saaj-api.jar
in my %JRE_HOME%\lib\endorsed\
so far so good !
The rest of the needed jars to run JAX-WS Webservices are in my WEB-INF/lib FOLDER
activation.jar and so on
Any Ideas ?
Here is the Exception I get when I invoke the Service
INFO: Illegal access: this web application instance has been stopped already. Could not load com.sun.xml.messaging.saaj.soap.Envelope. The eventual following stack trace is caused by an error thrown for debugging purposes as well as to attempt to terminate the thread which caused the illegal access, and has no functional impact.
java.lang.IllegalStateException
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1238)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1198)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl.getSOAPPart(Message1_1Impl.java:78)
at com.sun.xml.ws.message.AbstractMessageImpl.readAsSOAPMessage(AbstractMessageImpl.java:177)
at com.sun.xml.ws.client.dispatch.SOAPMessageDispatch.toReturnValue(SOAPMessageDispatch.java:93)
at com.sun.xml.ws.client.dispatch.SOAPMessageDispatch.toReturnValue(SOAPMessageDispatch.java:57)
at com.sun.xml.ws.client.dispatch.DispatchImpl.doInvoke(DispatchImpl.java:188)
at com.sun.xml.ws.client.dispatch.DispatchImpl.invoke(DispatchImpl.java:192)
at idff.server.service.ArtifactResolver.resolve(ArtifactResolver.java:101)
at servlets.AssertionConsumerServlet.doPost(AssertionConsumerServlet.java:149)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:619)
09.08.2007 14:40:12 org.apache.catalina.core.StandardWrapperValve invoke
SCHWERWIEGEND: Servlet.service() for servlet AssertionConsumerServlet threw exception
java.lang.NoClassDefFoundError: com/sun/xml/messaging/saaj/soap/Envelope
at com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl.getSOAPPart(Message1_1Impl.java:78)
at com.sun.xml.ws.message.AbstractMessageImpl.readAsSOAPMessage(AbstractMessageImpl.java:177)
at com.sun.xml.ws.client.dispatch.SOAPMessageDispatch.toReturnValue(SOAPMessageDispatch.java:93)
at com.sun.xml.ws.client.dispatch.SOAPMessageDispatch.toReturnValue(SOAPMessageDispatch.java:57)
at com.sun.xml.ws.client.dispatch.DispatchImpl.doInvoke(DispatchImpl.java:188)
at com.sun.xml.ws.client.dispatch.DispatchImpl.invoke(DispatchImpl.java:192)
at idff.server.service.ArtifactResolver.resolve(ArtifactResolver.java:101)
at servlets.AssertionConsumerServlet.doPost(AssertionConsumerServlet.java:149)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:619)
Listening for transport dt_shmem at address: bundled_tomcat
Anybody help, please !

First, thanks for your reply jitu.
I don�t get this exception anymore.
Well, your hint was quite right, so I think I may give you the duke stars.
I found out that putting the jars into the shared/lib don�t work. Maybe it is because I am running 3 tomcat instances at the same time.
I put all the Jax-ws libs into the tomcat_home/common/lib directory.
And left the endorsed libs in the java endoresed directory.
putting the endorsed libs in the tomcat_home/common/lib/endorsed may also work.
regards and thanks,
footman

Telnet, rlogin, ssh not ok on sun 240 with solaris 5.10 on it

Similar Messages

Maybe you are looking for