Temp File Name Schema in Receiver File adapter

Hi,
I have a scenario where i have to write the file in the temperaory location before writing it to the FTP loacation, I have selected the Processing Parameter as "Use Temperory File" but when the file gets created it is padded with the Message Id, is thr any option to get the file name as the temp file name without the Message Id or timestamp.
Please let me know if any one has come across such scenario.
thankx,
shree

Hi,
Under Write Mode, specify whether the target file is to be written directly in the specified directory. If an additional step is to be added using a temporary file, choose Use Temporary File.
You can specify a naming scheme for the temporary file under Temporary File Name Scheme.
This schema is used to determine the prefix and extension of the temporary file; to ensure a unique file name, a time stamp is also added to the name during processing.
The schema xitemp.tmp, for example, results in the file name xitemp<timestamp>.tmp
So you have to customise the file name in schema.
see below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Regards
Chilla

Similar Messages

  • Regarding  File name schema in  Receiver  com. Channel

    Hello,
    I have gone thru  the blog
    The specified item was not found.
    "The same filename from a sender to a receiver file adapter - SP14 for Dynamic configuration"  by Michal Krawczyk....And here in this Scenario in ID (in Reeiver communiation channel)what should we give as file name.(or) can we leave it blank.
    If my client wants the name ,then instead of assigning it to the root can I consider a element and assign the udf...In this case how it will effect the Receiver file name schema in Rec Communication channel in ID

    Hi,
    Pass it as %FileName% which will come from dynamic configuration.
    SAP note may give some hints- 746393 and also this thread has got the answer
    Module Processor : Module exception java.lang.ClassCastException
    Thanks
    Swarup
    Edited by: Swarup Sawant on Aug 22, 2008 11:19 AM

  • Dynamic file name (Date) in Receiver File Adapter

    Hi,
    can any one tell me how to create outbound file name with receiver file adapter in format like Name_22-08-2006.dat. I need from a current Date in the name of the message (without any other information). In message payload I don’t have that date. Is it possible to use variable from user defined function in message mapping for that name?
    Regards,
    Naycho

    Naycho,
    that's exactly what I've managed to perform using DynamicConfiguration. Check these links:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/09b16006526e72e10000000a422035/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03fe1bdc7821ade10000000a1553f6/frameset.htm
    Particularly, I've created a Java API for using setDirectory and setFileName methods through mappings. I use XSLT with java enhancement because it's a million times easier to parse and get node values with XSL than pure java.
    I'm writing a blog on the subject, if you don't resolve the problem until it's out, let me know.
    Regards,
    Henrique.

  • Target Directory & File Name parameters in Receiver File Adapter with ASMA

    Hi Experts..
    I have the following question....
    What am I suppose to inform in the Target Directory & File Name obligatory parameters in Receiver File Adapter if I am using ASMA to fill it? Is it any dummy value?
    Also, if you have any step by step guide/blog to forward on how to use ASMA in file adapter I will be greatful.
    Thanks in advance,
    Daniela

    You can give any dummy value in dir and file name... Just go through these blogs
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    /people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot

  • How to generate file name dynamically in receiver FIle adapter? Please help

    Dear Experts,
       I have a scenario where I need to generate output file with the name dynamically pulled from the XI payload.
       In receiver File communication channel I don't see any option where we can specify the XML path for the file name.
       For example:
       If my inbound XML structure (inbound interface) is like below:
       <filename>file123.txt</filename>
       <RootNode>
             <Element1>Product123</Element1>
       <RootNode>
      From this I need to pick the filename value and generate the output file with the same value.
      How can I achieve this? Please help!
    Thanks & Regards
    Gopal
    Edited by: gopalkrishna baliga on May 3, 2011 1:10 PM

    Gopal,
    You can use DynamicConfiguration class for this.
    You need to write UDF for this and with input of filename you want to set and map this UDF to the top level node.
    Refer the below famous blog from Micheal:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    You can also use Variable substitution to get value from payload, search SDN on this.
    --Divyesh Vasani

  • Reciever File Adapter - Temp File Name Scheme using Variable Substitution

    How can I create a temporary file that uses variable substitution? 
    We are having a problem with files merging when we write files using the "Use Temporary File" setting on the FIle Adapter.  So two independent files are merging into a single file.  We are not using the "Append" setting.
    We would like to use a Temp File Name Scheme that would append the message id onto the temporary file name. 
    Using variable substitution we created a msgid variable.  When added to the temporary file name using %msgid% the temporary file name is created with %msgid% in the name instead of the actual message id.  We put the variable into the "File Name Scheme" as well and the end completed file used the message id in the name.
    Any Ideas?
    Thanks,
    Matt

    HI Matthew,
    Why are you adding the message id into the temporary file??
    I understand that you want the output of the filename to contain message id .. and hence you are using variable substitution for the same.
    Temporary file name will anyways get overwritten by the actual file name (here the actual filename will be using variable substituion).
    So i suggest to achieve your scenario you can add any name in the temporary file and maintain the desired filename you require as output in the variable subsititution.
    Temporary File Name option actually acts as a lock - unlock mechanism from PI side while the file is getting written to the file server so that while PI is writting the file no third party application batch program picks it up.
    I hope this helps.
    Cheers
    Dhwani

  • File Name Scheme - Receiver Adapter

    Hi,
    I have a File Receiver Adapter which is using content conversion to take in XML and output a file. I want the output file to be called EOD286ccyymmdd.txt where ccyymmdd is the current date. Seems to be 2 options for file names:
    1. Add Time Stamp: No use as this adds the Date & Time. I only want the date.
    2. Variables: Don't think I can use this as it only seems to work if the data is part of the XML message packet. The date in ccyymmdd format is not contained in the XML anywhere.
    Is there anyway of getting the File Scheme Name I want ?
    Cheers,
    PaulC.

    Hi,
    You have one option in the File adapter receiver channel: 'Run Operating System command After message processing", where you can give any std OS command or you can give batch file (.bat) to run after the message processing. In batch file, you can write a set of commands which would rename the file according to your name format.
    Another bit complex solution is create your own custom adapter module and change the file name scheme.
    Thanks,
    RK

  • Changing file name schema

    In my receiver adapter the file name schema is intern_pay%var1%.dat and in variable substitution var1 is defined as message:message_id_hex.According to this i can see the file in the target directory as intern_payb0ba03a0904711dbbb9e00000e252c96.dat
    Can any one please help me out to change the format of the file in the target directory to intern_pay_yyyymmdd.dat
    Briefly, can any one please explain me how to change the file name schema in the receiver adapter.
    Many Thanks,
    Smith.

    Hi Paul,
    You can use DynamicConfiguration in a user defined function to achieve this.
    Go thro these threads, they will provide you the solution.
    Dynamic Directory and File Naming in Receiver Adapter
    In the above thread look at the post that answered the question. It will certainly help you.
    And go thro this also.
    Dynamic  File Name for Receiver File Adapter
    Regards,
    P.Venkat

  • File name naming convention in File Adapter configuration in ID

    Hi All ,
    I have a query related to xml filename created in IDOC-XI-FILE scenario based on value of one of IDOC field .
    The scenario is like this :
    I have to send one xml file per store for material master . In this case how can I define my file name with store name in File adapter configuration in ID .
    Naming convention should be
    <b><storename>_date_masterdataname.xml</b>where store name is one of field of IDOC .
    Plz help me .
    Thanks in Advance
    Regards
    Prabhat Ranjan

    Hi Prabhat,
    take a look at this weblog:
    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
    you have to specify variable substitution
    (in the file adapter)
    and give the path to the store name (in the variable sustitution table)
    you <b>file name schema</b> (from the file communication channel can look like this)
    %storename%_date_masterdataname.xml
    Regards,
    michal
    Message was edited by: Michal Krawczyk

  • Problem with file content conversion in receiver file adapter

    Hi All
    I have a problem with file content conversion in receiver file adapter.
    This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
    These are the content conversion parameters:
    Header_Record.fieldSeparator = ,
    Header_Record.endSeparator = 'nl'
    Claim_Record.fieldSeparator = ,
    Claim_Record.endSeparator = 'nl'
    Check_Rec.fieldSeparator = ,
    Check_Rec.endSeparator = 'nl'
    In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
    But, Adapter status is RED with the following error message:
    Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
    In communication channel monitoring, i get the following error message:
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
    What is going wrong here? Can anyone please tell me?
    Thanks
    Chandra

    Posted in Incorrect forum.
    Posted again in Process Integration forum

  • Question about pass file name and path to file write adapter

    I need to pass file name and path to file adapter for write. I got partial answers from thread Re: Get File name using File Adapter , but seems InboundHeader_msg or outboundHeader_msg only takes file name, how do I pass file directory?
    since I still have to specify file format (like xxx_%xx%.txt) in the file adapter wizard. Will this name conflict with what the name defined in InboundHeader_msg ?
    Similarly, how can I pass a file name and path to a file synchread adapter?
    Thanks,
    Message was edited by:
    user531689

    Just overwrite the filename in the WSDL file that was generated

  • Log4j - issue in configuring the file name for daily rolling file adapter

    We have configured the log4j properties. We want to create back-up of log file each hour. The file name of the log file is MyApp.log and as per the below configuration after each hour backup file is created as
    MyApp.log<<time>>
    but we want that file should be created in follogin format
    MyApp<<time>>.log
    Below are the log4j properties configured, please let us know, what should be the correct option to create the filename in desired format.
    # Set root logger level to DEBUG and its only appender to MyApp.
    log4j.rootLogger=DEBUG, MyApp
    log4j.appender.MyApp=org.apache.log4j.DailyRollingFileAppender
    log4j.appender.MyApp.File=D:/logs/MyApp.log
    log4j.appender.MyApp.DatePattern='.'yyyy-MM-dd-HH
    log4j.appender.MyApp.Append=true
    log4j.appender.MyApp.layout=org.apache.log4j.PatternLayout
    log4j.appender.MyApp.layout.ConversionPattern=[%d{yyyy-MM-dd} %d{HH:mm:ss z}] %m%n

    yes you can use /SAPDMC/SAP_LSMW_IMPORT_TEXTS via LSMW
    In the SAP system, there is no uniform rule for the structure of the actual text key Textname. However, in order to be able to maintain the structures and fields, you have to know what the structure of text name as well as the values for text object and text ID are.
    Procedure
           1.      Display a text of the required text type.
           2.      Branch to the editor.
           3.      Choose Goto > Header.
    The Text header dialog box appears.
    Result
    In the Text header dialog box, you gather the required information.

  • Flat file connection: The file name "\server\share\path\file.txt" specified in the connection was not valid

    I'm trying to execute a SSIS package via SQL agent with a flat file source - however it fails with Code: 0xC001401E The file name "\server\share\path\file.txt" specified in the connection was not valid.
    It appears that the problem is with the rights of the user that's running the package (it's a proxy account). If I use a higher-privelege account (domain admin) to run the package it completes successfully. But this is not a long-term solution, and I can't
    see a reason why the user doesn't have rights to the file. The effective permissions of the file and parent folder both give the user full control. The user has full control over the share as well. The user can access the file (copy, etc) outside the SSIS
    package.
    Running the package manually via DTExec gives me the same error - I've tried 32 and 64bit versions with the same result. But running as a domain admin works correctly every time.
    I feel like I've been beating my head against a brick wall on this one... Is there some sort of magic permissions, file or otherwise, that are required to use a flat file target in an SSIS package?

    Hi Rossco150,
    I have tried to reproduce the issue in my test environment (Windows Server 2012 R2 + SQL Server 2008 R2), however, everything goes well with the permission settings as you mentioned. In my test, the permissions of the folders are set as follows:
    \\ServerName\Temp  --- Read
    \\ServerName\Temp\Source  --- No access
    \\ServerName\Temp\Source\Flat Files --- Full control
    I suspect that your permission settings on the folders are not absolutely as you said above. Could you double check the permission settings on each level of the folder hierarchy? In addition, check the “Execute as user” information from job history to make
    sure the job was running in the proxy security context indeed. Which version of SSIS are you using? If possible, I suggest that you install the latest Service Pack for you SQL Server or even install the latest CU patch. 
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • Get File name of the inbound file during mapping

    Scenario: to read the file name of the inbound file (which has date required for the mapping) during runtime.
    The requirement is to read the date of the inbound file (passed to the XI pipline by the file adapter) and populate the same in the outbound mapping structure.
    Any idea about how to do this?
    (I went through few options of using java.util.map. not successful yet)

    Hi Anand,
    I posted the same question a time ago, without any help....
    Can I find out the full filename of input file in message mapping?
    Posted: Nov 23, 2004 1:00 PM
    I have in XI 2.0 the following scenario :
    In the inbound fileadapter I read my input file. The filename of the input file is part fixed, part variable (Like INDATA01.txt, INDATA03.txt, etc).
    So in my Adapterconfiguration, I specify the filename with a wildcard (INDATA*.txt).
    What I now want to do, is in my Message Mapping use the full filename , so I can do something different for every filenumber. Is there a way where I can get the full filename available in my message mapping (I did not find the filename in the XML in the message trace).

  • How write the Outbound file name in the Inbound file

    Friends,
    I have a scenario like this.
    Outbout filename - sample.txt
    In sample.txt, i have having data like 20
    Inbound filename - vivek.txt
    i need data the like sample, 20
    (NOTE: sample is the outbound file)
    How to get this scenario.
    Thanks in advance.
    regards,
    Vivek.

    Hi Vivek,
      If your PI is of SP14 and more you have an option called Adapter Specific Message Attributes.(ASMA) in communicatoin channel configurtaion, Which will help you in capturing the Sender file name during runtime.
    So you will have to enable that option (ASMA) in Commchannel and capture file name  in UDF using Java Code with the help of sap related API and map it to the target field which u would like to get populated.
    follow the thread it has the discussion about acessing the Source file name.
       Re: Getting file directory using dynamic configuration:Code needed
    Thanks,
    Ram.

Maybe you are looking for