Template not producing exact same results every time

I created a template (*.dwt) in DW8 using CSS layout. I then
created several pages using that template. One page I created looks
the way it should in all browsers. The other pages I created using
the same template (and no, the link between the pages and the
template is not broken) shift one particular table to the right by
one pixel, but only in Firefox. To combat this, I added this to the
css:
table.adjust {
position: relative;
left: -1px;
and gave the table the class of "adjust." What this did was
to fix the problem on the pages that had it, but then mess up the
correct pages (in firefox), and just mess up all the pages in the
other browsers. I can't seem to find any noticeable difference in
the code between the correct page and the wrong pages (why should
there be? It was a template!)
Within the editable regions, both pages have the exact same
skeletal structure:
<h2></h2><div class="bodytext"> (a number
of <p>s with no classes)</div>
Here's the correct-looking page:
right
Here's a wrong-looking page:
wrong
Here's the CSS:
css
Thanks in advance for any ideas!!

> In other words, as long as my pages are longer, they
display okay.
Is this a vertical scrollbar thing?
Try adding this -
html, body {
min-height:100.1%; margin-bottom:1px;
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jcdeagan" <[email protected]> wrote in
message
news:[email protected]...
> Ok... I have gotten warmer in finding a solution. In my
frustration, I
> replaced
> the content of the pages with some Lorem Ipsum in the
exact same skeletal
> structure. When I did that, the page displayed properly.
So, thinking that
> there was some tag messed up, I just pasted the content
directly over
> where the
> Ipsum was. It went right back to displaying incorrectly.
So, I then
>
added some Ipsum on the end of my content (in the exact same
> format),
> and it again displays correctly.
>
> In other words, as long as my pages are longer, they
display okay.
>
> My next question, to you CSS gurus out there, that what
in the heck in my
> CSS
> code would make it so that a shorter page displays
incorrectly while the
> longer
> pages display correctly? I tried taking the "height:
100%" out of
> #wrapper, but
> that didn't do anything worthwhile. I'm attaching the
CSS code to this
> post.
>
> /* CSS Document */
>
> body {
> font-family: Verdana, Arial, Helvetica, sans-serif;
> background-color: #cccccc;
> text-align: center;
> margin-top: -5px;
> }
>
> a:link {
> color:#718fa6;
> }
>
> a:visited {
> color:#545454;
> }
>
> a:hover {
> color:#000000;
> }
>
> a:active {
> color:#000000;
> }
>
> h2 {
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-size: 18pt;
> font-style: italic;
> color: #718fa6;
> text-align: left;
> }
>
> h3 {
>
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-size: 16pt;
> font-style: normal;
> color: #718fa6;
> }
>
> .normaltext {
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-size: 12pt;
> color: #000000;
> text-align: left;
> }
>
> .bodytext {
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-size: 12pt;
> color: #000000;
> text-align: left;
> padding-right: 6px;
> padding-left: 6px;
> }
>
> img.line {
> border: 1px solid #CCCCCC;
> padding: 3px;
> margin: 5px;
> }
>
> /* outside edges */
> #wrapper {
> text-align: center;
> width: 845px;
> height: 100%;
> background-image: url(../images/pgbg2.png);
> background-repeat: repeat-y;
> margin: 0 auto;
> }
>
> #content {
> width: 809px;
> background-color: #FFFFFF;
> padding-right: 5px;
> padding-left: 5px;
> margin: auto;
> position: relative;
> padding-top: 1px;
> padding-bottom: 1px;
> }
>
> /* footer */
> #footer {
> background-image: url(images/footer.png);
> background-repeat: no-repeat;
> height: 75px;
> width: 845px;
> text-align: left;
> margin: 0 auto;
> padding: 1px 0;
> }
>
> .copyright {
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-size: 10pt;
> font-style: italic;
> color: #666666;
> margin-top: 10px;
> margin-left: 30px;
> }
>
> /* Layout styles */
> .rightcol {
> border-left-width: 2px;
> border-left-style: dotted;
> border-left-color: #CCCCCC;
> width: 273px;
> margin-left: 5px;
> text-align: left;
> }
>

Similar Messages

  • When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

    when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • Permissin repair. same results every time.

    Hi, every time I repair permissions, I get the same permissions "repaired" each time. I can do it 3 times in a row, and still the same results. My computer seems a bit sluggish, and it is brand new. Any thoughts?

    It let's you know exactly what was done when you repaired permissions. If all you see are We are using special permissions…, then nothing's being repaired. If you see entries, such as Permissions differ on… followed by Permissions corrected on…, then those permissions were incorrect and were corrected.

  • Burned DVD does not produce the same result as the Encore 2.0 preview

    Video captured directly into Adobe Premier Pro 2.0 from a Canon GL2 camera
    Using an HP media center PC (Model M1270N)
    Pentium 4 (3.00 GHz)
    1.0 GB RAM
    ATI Radeon X300SE PCI-E graphics card 128 MB DDR video memory
    I purchased Adobe Creative Suite (Production Studio Premier) last month. Using Adobe Premier Pro 2.0 I produced two video
    One video was 36:43 minutes. Original size was 8.35 GB, 7.9 bitrate
    Second video was 37:41 minutes. Original size was 8.57 GB, 7.9 bitrate
    I then brought them into Adobe Encore 2.0 and created a simple menu. Using the Preview from here button the menu and the videos had no problem. Using the Check Project button there were no errors. The disc information showed that there was 146.8 Mb free on a 4.7 GB disc after the project was transcoded.
    Upon burning the DVD and putting it into a computer or a DVD player the first video played fine all the way through the second one within the last 3 minutes began skipping for the remainder of the video and then terminated as planned by going back to the menu.
    Question: Is there any way to keep the last portion of the second video from skipping? I found the problem when I had sent the DVD off to a duplicator and the duplicator told us about the problem.
    Any help would be appreciated.
    Regards,
    Kerry S.

    Hussman,
    Glad that Playlists worked for you. DVD authoring can be a great learning experience, as a whole. The Encore part came pretty easy for me, but I had the help of many of the gurus in this forum, plus Jeff Belune's book, "Focal Easy Guide to EncoreDVD 2." Don't let the Encore 2 part throw you, as 95%+ of the info carries over to Encore CS3, and possibly CS4.
    After the manual, Jeff's book, and the "Classroom in a Book EncoreXX," I find that just reading the posts in this forum is a big help. Almost every day I find a "wow, I didn't know you could do
    b THAT
    with Encore," just by reading the stuff here.
    Fortunately, my relationship with the program has been Love/Love, but maybe I've just been fortunate.
    Good luck,
    Hunt

  • Report does not print exactly same as it appears at design time

    Hello,
    I am using SAP Crystal report with VS 2010.
    I designed a report. At design time every thing appears fine. Margins are set to 0, printer is selected and page size is custom.(right click on report, design>pagesetup)
    When I use <reportname>.printtoprinter(), it dramatically changes the text size and margins of the report in hard copy. I tried literally everything for this. Especially It adds nearly 2 inches extra margin at top.Also , at run time it changes the font size to 8 or 9 points if i have set it to 12 at design time.
    I get the same problem if I do following:
      crystalReportViewer1.ReportSource = rptRcAbh;
       crystalReportViewer1.PrintReport();
    HOWEVER!!
    When I do this:
      crystalReportViewer1.ReportSource = rptRcAbh;
    AND when I manually click the print button of crystal report viewer, i get EXACTLY SAME result as design time. This is what I am expecting from printoprinter() method. But Its changing result dramatically.
    Why is this happening? Am I forgetting any setting?
    I must use reprot.printtoprinter() method here. Because I am printing the bill receipt. I dont want the user to go to printpreview then click print. AND I must get same result as design on printed page.
    Please help me. I am in urgent need.

    Hi Don,
    Firstly I am very very thankful to you for replying me.
    I know I must have irritated you a bit cuz I was expecting everything ready which I should have :P
    but I was in urgent need and there was no time for me to read everything. I must say a thing that I did not get good search results on printcontroller when I used search box of this website.
    Well Thanks again for helping me in deed.
    I am sure this must be the problem for many people across the globe, hence I am posting the exact code that helped me to print the document Accurately:
       rptReceiptAbhishek rptRcAbh = new rptReceiptAbhishek();
            //        rptRcAbh.Load("rptReceiptAbhishek.rpt", OpenReportMethod.OpenReportByTempCopy); i did't need this line
    //////// Directly Entering data to the fields of the report.
                    CrystalDecisions.CrystalReports.Engine.TextObject txtname;
                    CrystalDecisions.CrystalReports.Engine.TextObject txtaddress;
                    txtname = (CrystalDecisions.CrystalReports.Engine.TextObject)rptRcAbh.ReportDefinition.ReportObjects["txtRptName"];
                    txtname.Text = cboInitials.Text + " " + cboDonarName.Text;
                    txtaddress = (CrystalDecisions.CrystalReports.Engine.TextObject)rptRcAbh.ReportDefinition.ReportObjects["txtRptAdd"];
                    txtaddress.Text = txtAddess.Text;
                    rptRcAbh.PrintOptions.PrinterName = Properties.Settings.Default.PrinterName;
                    System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
                    CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions();
                    CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions();
                    pDoc.PrinterSettings.PrinterName = Properties.Settings.Default.PrinterName;
                    pDoc.PrinterSettings.SupportsColor.ToString();
                    //if (pDoc.PrinterSettings.SupportsColor)
                    //    MessageBox.Show("Printer Supports Color", pDoc.PrinterSettings.SupportsColor.ToString());
                    rasPROpts.PrinterName = Properties.Settings.Default.PrinterName;
                    //   rasPROpts.PaperSize = (CrPaperSizeEnum)pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
                    //rasPROpts.PaperSource = (CrPaperSourceEnum) pDoc.PrinterSettings.PaperSources[cboDefaultPaperTrays.SelectedIndex].Kind;
          //          rptReceiptAbhishek rpt = new rptReceiptAbhishek();
                    var rptClientDoc = rptRcAbh.ReportClientDocument;
                    rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
                    MessageBox.Show("Printing in progress. Make sure that printer is not turned off.", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);

  • Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

    Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

    Hi,
    Are you facing the issue with any pdf file?
    Please try updating Acrobat to 11.0.7 and check.
    You might also want to repair Acrobat and see.
    Regards,
    Rave

  • I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

    I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

    Do you remeber the exact (or close to it) wording of the error message?
    Try manually placing the iPod in Recovery mode and then try to restore
    Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can also try another computer  to help determine if you have an iPod or computer problem.

  • HT1338 my MAc Book PRO 13" Retina display will not update.  It crashes every time I try to do an update.  I have sent in the information on each update but so far nothing back from Apple.

    my MAc Book PRO 13" Retina display will not update.  It crashes every time I try to do an update.  I have sent in the information on each update but so far nothing back from Apple.  Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash.   This mac book is less than a month old.

    That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed).  Version 4.2.1 marks the end of your updates for that device.

  • Adobe Media Encoder for Premiere Pro CS4 stops working on the same frame every time...

    I currently have Adobe Premiere Pro CS4 and have never had these issues exporting before. My timeline is less than 3 minutes long, but it does deal with multiple big files. It rendered perfectly and it plays perfectly in the timeline. When I try to export it using Media Encoder, however, it freezes at the same frame every time (which is actually only a few seconds in!) and then crashes, so that I have to force quit. I have tried exporting it as many different codecs and the problem persists... same frame. I tried creating a new project entirely and whipping together a few titles and exporting that to see if it just won't export anything at all. The new project exported just fine, however, which I suppose is good news. But yeah, my work on that other project is very important to me and I reallllly want to export it. Please help!

    Hi Jim! Thank you for your reply. I think you are right -- and that it lies in the audio somehow!
    It turns out that if I choose to only export the video, and uncheck audio, it will export very well and smoothly. That's great news for me!
    However, now I am trying to work out how to get the audio exported without issues. I actually had the idea of just playing the audio in the timeline and recording it via Stereo Mix, but my Windows 7 driver has Stereo Mix disabled, so it's back to square one. Any ideas of what I can do about the corrupted audio not exporting, which works fine when played in the timeline?

  • I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

    I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem.  I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction.  Thank you!

    update directly, Product updates

  • Same Tunes Every Time

    I've had my iPod Touch for about a month now. As I look at iTunes when my iPod Touch synches with my MacBook Pro laptop, it seems that over and over it needs to update the same 7-10 songs. Same songs every time. And I haven't even played them. There should not be any reason to update these songs, but they are synched every time.
    Anyone else seeing this?
    Neal

    If just replacing the artwork on the offending songs doesn't fix it, I read from another user here that you can try changing the iPod to manual mode, then back to auto-sync. Not sure if that actually works though, but seems harmless.

  • Web sudoku app prints the same puzzle every time?

    We got an 8500A plus from Costco recently. My mom was able to print her favoriate game for the first time, thanks to the web sudoku app and the touch interface. Unfortunately, it seems to print the same puzzle every time for the same category (easy, medium, hard, evil).
    Any tips to make it print something different each time? Is it only updated daily?

    Dear hpllu, 
    You should try unistalling and reinstalling the sudoku app from the ePrintCenter website.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP

  • How can I save to the same map every time when printing pdfs?

    How can I save to the same map every time when printing pdfs?
    Finder points to the document map even when I chose a different map recently.
    I often print series of pdfs from the print dialog box, I'd like to choose the map to save to and then have all subsequent pdf prints automatically directed to the same map until I decide otherwise.

    that link seems to be broken right now:
    403 Error - Forbidden  - No cred, dude.

  • I have problems with my macbook pro ... I recently bought "OS X Lion Mountain" but complete installation did not work ... purchases every time when I look biem appstore is still installed ... so now I have OS X version 10.8.3 ...

    I have problems with my macbook pro ... I recently bought "OS X Lion Mountain" but complete installation did not work ... purchases every time when I look biem appstore is still installed ... so now I have OS X version 10.8.3 ...

    does it say not installed or does it say "download" in app store purchases?
    if it say's download,  then it's there for future use if you need to download it again.
    see image below - i'm running Mountain Lion and it say's download in my App Store.

  • How do you turn off the passcode from iphone 3gs?? I do not want to get prompted every time I turn on my phone!!!!

    How do you turn off the passcode feature from iphone 3GS?? I do not want to get prompted every time I turn on my phone.

    Settings > General > Passcode Lock
    You're going to really regret this if you ever lose your iPhone.

Maybe you are looking for

  • OC4J - Starting container in debug mode

    When the container is started in debug mode, start-up messages are referring to XAtransactions. This is causing a bit of confusion as we?re not using distributedtransactions. Is this an internal message ? The message is: Null: Connection XAXA Orion P

  • Problems SOAP to SOAP scenario

    Hi my scenariao is as follows: nonsapA ->WebserviceA->XI30->WebserviceB->nonsapB I am working NON SAP to NON SAP. IR work: Syncrounous MI set up: I have created a webservice WSDL based on my MI for WebserviceA Imported from the web the webserve Webse

  • Restore a database in recovery mode sql server 2005

    Please i need some help. My database has been marked in recovery in sql 2005 management studio and i can't connect to it how do i bring it back to normal

  • To prevent user from droping his own object .

    Dear User I have a database user like "aaa" in oracle 7.3.4.0.1 database.i do not want user "aaa" to drop his own schema objects like table and any other objects that he is owner.Do i have any system privilege to stop this user from doing so.User sho

  • Add "make unique symbol" to the symbol context menu

    There are many times I need to make a "variation" of a symbol that should also become a symbol. The current method requires several unnecessary steps. I'd like an option in the "Symbol" context menu called "Make unique Symbol". It would duplicate the