Temporary files are not getting deleted

Hi All,
I am using informix database and my code is reading BLOB from database and writing the image to different storage media. The program has to run for number of images. It is writing to media successfully but not exiting even after printing the last statement in program. it is generating some temporary files ifxb_* . If I use System.exit() garbage collection is not happeneing and temporary files not getting deleted.
I am storing BLOB to an InputStream. and closing all the Connections and ResultSet before exit.
Can anyone please tell why program is not exiting normally?

gtRpr wrote:
It doesn't make much sense to me to go through extra work to make code insecure, when doing things the right way is easier and more secure.@yawmark - I get it, relax.
I never used them last year because I only found out about there existance about 4 Months ago.
And guess what I have never used normal statements for something like that again.
Only time I use a normal Statement is when I run that query only once, and no the entire query is hardcoded so no need for any worries due to security.Um ... D'you post this to the wrong forum/topic?
Anyway, OP ... I don't know a thing about informix, so perhaps a trip over to IBM would help ... they have lots of information on their site. You might want to try a different forum right here at java.sun.com as well.
About those closing of Connections and Resultsets ... are they in finally clauses? They should be.
~Bill

Similar Messages

File is not getting deleted in File-RFC-File without BPM

Hi,
I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
For the sender CC, I'm passing the following parameters,
Transsport protocol: File system
Message protocol: File
QoS: BE
Poll Interval: 30 sec
Mode: Delete
File type: Binay
Please let me know if I missed anything while passing the values.
Thanks,
Swamy
Edited by: Swamy Mothe on Jun 15, 2009 8:52 AM

Hi
Then , is Sender and receiver File Adapter is using same folder )
Just a question.
But having all permisions and above config would delete the file
can u see the status of u r File Adapter in RWB.? Is it in green?
rgds
srini

Changes to Excel files are not getting updated

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.

Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support

IMovie HD creates corrupt db file which not get deleted out of trash

iMovie HD creates corrupt db file which not get deleted out of trash.
How to delete this file ?
Please help me out,
Thank You.

Where is what file created? (Do you see it in iMovie or Finder?)
Which trash, iMovie's or Finder's?

Material with flag for deletion are not getting deleted

Hi All,
Classic Scenario
ERP - Materials were marked for deletion on the client level
SRM - COMMPR01 - Materials are marked for deletion
Question - When we ran BBP_CCM_Transfer_Catalog and Publish the Master Catalog the materials are not getting deleted in TREX.
Please advice.
Thank you very much,
Carpenter

I have to delete the Product in SRM and this will delete the Index in TREX Search.
Thanks

Music files are automatically getting deleted.

I am copied the music files from my hardrive to IPOD using itunes, but the files are automatically getting deleted after some time in IPOD. Can some one help me on this.

- How are yu adding the music to the iPod? Are yu syncing or manually managing music?
- Are you doing antything to the iPod when the music disappears?

Profile Imanges are not getting deleted from Profile Image library

Hi,
If I go mysite and edit my profile and set a profile images and save the changes. Image is uploaded to profile Image library in the root of the mysite.
I Edit my profile again and this time I remove the profile image and save the changes. Image is not getting deleted from the profile Image library.
as per my understanding it should get deleted. My site clean job is running. user profile is active in AD.
Thanks
Omkar

My first question would be is it a big deal if the picture doesnt get deleted from the libarary? My understanding is that the profile picture field is a URL link, the first time you add a picture it will provision 3 copies of differing sizes to the
library. When you "remove" the picture, it just empties out the picture URL field. Which is a nice hidden recovery if someone accidently deletes a profile photo they really wanted (Or if your company really locks down picutures so you only get
a choice of a couple avatars instead of a personal photo).
Similar issue:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17bc8538-568f-4fff-8933-458fdba4b701/delete-user-profile-picture-in-sharepoint-2010-when-account-is-deactivated-or-deleted-from-ad?forum=sharepointadminprevious
and response:
Since the user photo library follows certain standards OOB:
http://iedaddy.com/2010/12/sharepoint-2010photo-management-for-social-mysites/
I would say just create a small script that will periodically read the UPS and make sure there are no photos sitting in the library not associated to an account... here's an example of accessing the User Profiles w/ Powershell:http://iedaddy.com/2010/06/sharepoint-2010-updating-user-profile-properties-with-powershell/
You would just modify it to delete image files whose name is not associated to an existing NTName in the UPS.
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

Files are not getting updated in sharepoint 2013 because of office upload center error

Dear Team,
I am getting upload failed/upload error in Office Upload Center.
Scenario: I opened excel(version is 2013) file from sharepoint 2013 application and closed and after updating. Later when I opened the file I got error like "UPLOAD FAILED We are sorry this didn't work. Try saving again later and if that still doesn't
work, click save a copy."
I found the error is because file is getting upload failed / upload error in microsoft office upload center2013.
Please let me know if anyone know the solution for my issues
Thanks in Advance
Girish

Hi Girishkg,
The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
The limit can be set in web application’s web.config file or in IIS .
There are two detailed articles about setting the limit:
http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support

Files are not getting posted in destination directory,how to trace in XI

Hi,
our scenario is proxy to file.
We are posting files of .TRG and .DAT format in destination directory.Due to less space in destination directory, files only .TRG files are getting posted but .DAT are not getting posted.but i have checked in XI system SXMB_MONI,no error message is coming.message is getting processed successfully.
why it is not visible and to monitor that files are not saved at the destination.
Is this normal with XI that we can not see of files are really saved?

Hi,
> it should generate two files as per scenario but only one file is getting generated due to less space,
NO.
If No Space, The error will pops out in RWB .
Check the directory of the File Adapter you are using
Regards
Agasthuri Doss

Data in BBP_DOCUMENT_TAB are not getting deleted

Hi All,
We are in SRM 4.0.
Since today morning whenever a user trying to create / change shopping cart, PO, GR it got updated in the BBP_DOCUMENT_TAB. But it is not getting deleted automatically. Earlier it used to get deleted automatically once the documents have been ordered.
But I could see the POs and GRs have been transfered to the back end system.
Job CLEAN_REQREQ_UP is running every 2 mts.
Please advise.

Hi Arun,
note 338985 describes in detail how the the status of the document(s), CLEAN_REQREQ_UP and the IDOCs interact.
If the documents are posted without any error i.e. there´s everything perfect but the 'obsolete' entries in BBP_DOCUMENT_TAB, then this sounds like a malfunction.
Maybe you should debug the the cleaner with one document and see whats happening starting at the following spot:
CLEAN_REQREQ_UP
process selected entries: check existence of follow on documents,
update if necessary local documents etc. (depends on entry type)
        LOOP AT selarea.
          IF still_to_proc = c_proc_block_size.
            SET UPDATE TASK LOCAL.
          ENDIF.
lateron the entries are deleted in function module BBP_DELETE_FROM_DOCUMENT_TAB
Note 535765 describes how to delete entries via a Z* report but I would NOT RECOMMEND to do that without having checked the situation by SAP before.
see note 535765:
Please note!:
Deleting relevant entries from the BBP_DOCUMENT_TAB may cause severe
problems, as the system needs the entries to set the right status to
shopping carts, invoices and confirmations. So please be careful with
the deletion of entries.
Kind Regards
Michael

Nohup.log files are not getting generated correctly

hai,
im a weblogic administrator. Here is my problem in weblogic. My partner has complained that nohup.logs are not getting generated properly. Like for every 5 mins a new nohup .log file is getting generated. But almost 4 to 5 logs are of 0 size and after that the 6 log file is very hug ( around MB). And the status of the managed servers is in FAILED state. When i checked the nohup logs, i can see "E297: Write Error In Swap File" and also the below error. But when i checked the disk space it is only 30 % full. Please suggest me something that can help me in this. Why is this behavior in the nohup.logs? have anyone faced anythign like this? Please help me.
But after the recycle everything is fine. But i want to know what went wrong and why it got recovered after the recycle.
<Feb 11, 2010 7:43:59 AM CST> <Error> <HTTP> <BEA-101246> <Error occurred while flushing HTTP log file for the Web server: wl38_managed1
java.io.IOException: Disk quota exceeded.
java.io.IOException: Disk quota exceeded
at java.io.FileOutputStream.writeBytes([BII)V(FileOutputStream.java:???)
at java.io.FileOutputStream.write(FileOutputStream.java:260)
at com.wily.introscope.agent.probe.io.ManagedFileOutputStream.write(ManagedFileOutputStream.java:423)
at weblogic.utils.io.DoubleBufferedOutputStream.flushBuffer(DoubleBufferedOutputStream.java:58)
at weblogic.utils.io.DoubleBufferedOutputStream.flush(DoubleBufferedOutputStream.java:157)
at weblogic.servlet.logging.LogManagerHttp$FlushLogStreamTrigger.trigger(LogManagerHttp.java:522)
at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:50)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

according to error message, your partition size have not enough disk space from where you are running nohup command. check with df -kh.

Mails are not getting deleted from server

Hi
I am reading a mail from using java mail from my mail server.
When i am setting the message.setFlag(Flag.DETELED,true);
the mail is not getting deleted from the server.
I am not able to trace the problem, please help me solving this problem. It's a bit urgent.
store = session.getStore("pop3");
store.connect(hName, portNo, uName, pWord);
folder = store.getFolder("INBOX");
folder.open(Folder.READ_WRITE);
Message message[] = folder.getMessages();
System.out.println("Unread Msg Count : " + folder.getUnreadMessageCount());
int n = message.length;
for (int i = 0; i < n; i++) {
fromMsg = (message.getFrom()[0]).toString();
subMsg = (message[i].getSubject()).toString();
if (folder instanceof POP3Folder) {
POP3Folder pf = (POP3Folder) folder;
Part messagePart = message[i];
content = messagePart.getContent();
if (content instanceof Multipart)
messagePart = ((Multipart) content).getBodyPart(0);
String contentType = messagePart.getContentType();
Part messagePart = message[i];
content = messagePart.getContent();
if (content instanceof Multipart){
messagePart = ((Multipart) content).getBodyPart(0);
String contentType = messagePart.getContentType();
message[i].setFlag(Flag.DELETED, true);
store.close();
Thanks and Regards,
Luv Amieee...
xx

yeah true...
i did not close the folder.
i got to know from sun faq only later on yesterday.
but still.. thanks a lot...
luv amieee..
xx

Files are not getting stored in memory card

mine is lumia 620,i have chosen the mem.card option to save photos and music files.But the files i download are stored in phone memory ,not in memory card although the files are shown in mem.card it shows error while i try to play it in computer.

hi mate, is your memory card a Class 10 memory card or corrupt? you only need Class 2 or Class 4 memory cards. It would also pay to scan the memory card thru Windows Explorer to see if there are any file system errors, else you can try formatting the memory card on PC and then formatting it on the phone itself.
as precaution, try performing a soft reset on your 620, and also ensure that you are up to date with the latest firmware and Nokia system app updates from the Store.

Flat files are not getting generated in ftp

Hi Expers
In my scenario,R/3 system is sending IDOC's to FTP(POS) server,but issue was occured in generating the flat files for 3 articles.
Can anybody please tell me the steps how to resolve this issue...
Regards
Raj

Hi Ramesh,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>com/sap/xi/tf/_IXRIMandPriceToGMStore_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com/sap/xi/tf/_IXRIMandPriceToGMStore_com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
This is the error message i am getting in Moni...Could u please suggest me in this..
Regards
Raj

Large files are not getting transferred through file channel

Hi
the below code works fine for files upto 32 mb, but if the file size is more like 141MB, 250MB then the transfer starts but it doesnot get complete. the destination pdf is not opening and acrobat reader says that the pdf has been corrupted
import java.beans.*;
import java.io.Serializable;
import java.io.*;
import java.io.File.*;
import java.util.zip.*;
import java.nio.*;
import java.nio.channels.*;
public class Transfer
   public static void main(String args[]){
     String srcFile = "C:\\\\144 mb.pdf";
     String dstFile = "F:\\144 mb.pdf";
     try{
     FileInputStream in = new FileInputStream(srcFile);
        FileOutputStream out = new FileOutputStream(dstFile);
        FileChannel fcin = in.getChannel();
        FileChannel fcout = out.getChannel();
        long size = fcin.size();
        fcin.transferTo(0, size, fcout);
     }catch(Exception e){
}//close of classwhat could be the reason

below is the code that executes as Task1 when triggered as a thread from Class B
public class C implements Runnable{
    String srcFile = "";
    String dstFile = "";
    public C (String srcFile,String dstFile){
       this.dstFile = dstFile;
       this.srcFile = srcFile;
public void run() {
try
       FileInputStream in = new FileInputStream(srcFile);
       FileOutputStream out = new FileOutputStream(dstFile);
        FileChannel fcin = in.getChannel();
        FileChannel fcout = out.getChannel();
        int maxCount = 32 * 1024 * 1024;
        long size = fcin.size();
        long position = 0;
        while (position < size) {
            position += fcin.transferTo(position, maxCount,fcout);
          fcin.close();
          fcout.close();
}catch(IOException ioe)
          System.out.println("FIECOPY SQL ERROR:"+ioe);
catch(Exception e)
          System.out.println("FIECOPY ERROR IN TRANSFER FILE:"+e);
}below is the code that executes as Task2 when triggered as a thread from Class B
public class D implements Runnable{
    String srcFile="";
    String dstFile="";
    String moveCategory="";
    public D(String srcFile,String dstFile,String moveCategory){
       this.dstFile = dstFile;
       this.srcFile = srcFile;
       this.moveCategory = moveCategory;
public void run(){
try
       FileInputStream in = new FileInputStream(srcFile);
       FileOutputStream out = new FileOutputStream(dstFile);
        FileChannel fcin = in.getChannel();
        FileChannel fcout = out.getChannel();
     int maxCount = 32 * 1024 * 1024;
        long size = fcin.size();
        long position = 0;
        while (position < size) {
            position += fcin.transferTo(position, maxCount,fcout);
          fcin.close();
          fcout.close();
}catch(IOException ioe)
          System.out.println("FIECOPY SQL ERROR:"+ioe);
catch(Exception e)
          System.out.println("FIECOPY ERROR IN TRANSFER FILE:"+e);
}

Temporary files are not getting deleted

Similar Messages

Maybe you are looking for