Test a file to fle scenario using NFS in 7.1

Hi Experts,
I have one small confusion...
when testing a file to file scenario in PI 7.1 using NFS...im wondering what path should i specify for the source directory?
cos earlier in 7.0, i would have given /usr/sap....
but now i dont think 7.1 has visual admin..so what shoud i so?
ne suggestions?

Hi Ravinder ,
cos earlier in 7.0, i would have given /usr/sap....
but now i dont think 7.1 has visual admin..so what shoud i so?
> there is nothing to do with visual Admin ..
Just give a sharable folder path to pick and post the file as you were giving earlier. If your concern is file path ask basis person to help you.
Regards,

Similar Messages

File to SOAP Scenario Using BPM

Hi,
I am doing File to SOAP scenario using BPM.
while doing Integration Process in IR, i got the following error message
"Expression of simple type xsd:string expected"
But i have given xsd:string in the correlation element as well as in Data types.
I dont know why it is getting the error.
could you anyone please help me to sort out?
Regards,
Sai Ch.

Hey,
Check in the correlation editor, where you define the condition.
Whether the data type of the XPath is string and whether it matches with the data type of the messages that you have selected.also make sure the type of the correlation variable is string.
regards,
Milan

File to IDOC Scenario using BPM

Hi Experts,
    I am working on file-Bapi-Idoc scenario using BPM.
    I have two conditions
1. If the Sonumber is populated then need trigger an Bapi_change
2.If the Sonumber is not populated from the file then need to trigger a Bapi_Createfromdat to create the sales order and receive the salesorder number as response from Bapi
and the response of these BAPIs should be validated whether the Bapi is successful or not.
If it is successful message then need to trigger IDOC or else should throw an alert message.
let me know the steps involved in this scenario.
can i send alert message to other email IDs or can i send it to only XI admin?
Please let me know u r inputs.
Thanks in advance
Praveen

Hey,
You need to have a BPM for this.
BPM design.
Recieve step(abstract asynchronous) for file structure
Switch Case(condition whether sonumber is populated or not)
if populated
Branch 1(of switch)
    transforamtion step:- mapping between File and Bapi_Change(Request structure)
Send step(abstract syncronous) To send the BAPI_change
Branch 2(of switch)
transformation step:-mapping between file and BApi_Create
Send step(abstract synchronous) To send the BAPI_Create
Block step(which will include the Switch step)
    trigger an Execption in case of an error(in any of the two branches) through the block
    The Exception will trigger an alert.
Now after the Block step there will be a transformation step(which will have the mapping between RFC response and Idoc)
Next is the send step(abstract asynchronous) for the idoc
In case if there is no exception the Idoc will be triggered or the exception branch will trigger the alert
rewards points if useful
regards,
      Milan

File to File scenario using NFS.

Hi All,
I am learning XI and got stick in a relatively simple issue.
I am creating a scenario wherein a file from a directory on local machine say (D:/xi_input) is transferred to a directory on local machine only (say D:/xi_output).
I guess this scenario is feasible using NFS, but i m getting an error in communication channel -
"Configured source directory 'D:/xi_input' does not exist"
After reading some documents and threads on sdn, i could understand that we have to replace '\' with '/'. But even with this same error is coming. Can you feel throw an insight where could the problem be,
Thanks in advnace,
Shreya

Hi Shreya,
PI will not pick up the file directly stored on your local machine.
You have to put this file on the PI server directory.
For this, you can use the transaction sxda_tools and put the file in the required directory of PI server,
and then start the communication channel.
-Supriya.

File to Soap Scenario using UDF

Hi Guys
We have a requirement that said:
IF ShortDescription is not u201CNULLu201D then
map ShortDescription
ELSE IF ShortDescriptionLang with LanguageCode u201CENu201D is not NULL
map ShortDescriptionLang
So what I did is:
if( ShortDescription != "NULL")
map ShortDescription;
else if( (ShortDescriptionLang != "NULL" ) && ( LanguageCode == "EN") )
map ShortDescriptionLang;
But everytime when pressing f7 to check for errors I get thid:
C:/usr/sap/PI1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map0b27cd32dc2611df84e7000c2973cb67/source/com/sap/xi/tf/_MM_MATERIAL_TO_CATALOGUE_.java:441: '}' expected
Can someone suggest on how can I test this fucntionality cause one thing that I don't understand is the "map ShortDescription" and "map ShortDescriptionLang"
How do I put it on my if statement
Thanks,
Yonela

Hi All
On my FILE to SOAP Scenario I awant to map a field from my Target to get a Message ID on the moni like in the code below:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","XHeaderName1");
String value = conf.get(key1);
return value;
My is like this:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","Messageid");
String id = conf.get(key1);
return id;
But the when presing f7 I get error:
C:/usr/sap/#####/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map1fee8942e00c11df9d67000c2973cb67/source/com/sap/xi/tf/_MM_MDM_MATERIAL_TO_CATALOGUE_.java:591: cannot return a value from method whose result type is void return value; ^ 1 error
So is it possible for me to use statement like this:
("http://sap.com/xi/XI/System/SOAP","Messageid");
Thanks
Yonela

File to Idoc Scenario using third party systems

hi,
Working with a File to Idoc Scenario. Been able to successfully define everything in IR / ID. However when I go to BD87 (reciever system) and see the status of Idoc processed - getting the error code 51 "Function Module Not Allowed: <Function Name>" . What could be the reason for this???
Have defined partner profiles in WE20 of type LS and also specified an inbound paramter in the post processing tab for partner profile. Are there any other settings I need to take care of to avoid getting that error.

Hi
I am giving u all the steps whioch are required for
<b>File to IDoc</b> Scenario
SM59- Create RFC destination
IDX1- Create a IDXPORT in idx1
IDX2-3. Import metadata of IDocs in idx2
Bus. service adapter specific Identifiers-->Logical sys name
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
SE16-Table name->LFA1 to check vendor has been created
Check have u followed all the steps.
Regards
Arpit Seth

File to IDOC scenario using FTP server

Dear Experts,
I'm getting IDOCs in the form of .TXT file from sender side and at reciever end we have IDOC. We are using FTP connection at sender.
I want to know:
1. Is FCC the only solution to integrate with PI or do we have any other option also?
2. What all the things I need to care in designing and configuration?
Thanks a lot.

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

File to JDBC Scenario using stored procedure Question

Does anyone have an aswer (or have you seen a Blog that covers it) to the problem of having to do a table refresh before doing inserts in a file 2 jdbc scenario?
Essentially the details are as follows:
I have an input file that has all the data for a table (it's a complete table dump) of lets say userdata (username, name, hiredate).
I need to pass that to an oracle database via stored procedure(s). But before I start issuing my insert (via insert stored procedure) I have to somehow issue a delete statement to delete all the contents of the table I'm about to update. I'm on XI 3.0 and aren't sure what the best solution to this may be.
Again if there is a blog that covers this then if you could point me in that direction it would be great. Otherwise if anyone has any good ideas it would be appreciated.

Hi,
For structure refer this blog..
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Use two <Statement> tags as shown here and there you may have separate tablenames.
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
Thanks,
Jogula Ramesh

File to RFC scenario using BPM : a synchronous one

Hi All
I am doing File>RFC>File scenario using BPM with help of the blog
RFC Scenario using BPM --Starter Kit
here everything is explained but i am getting error while the processing of BPM part
Input file is being picked (this part is success) but rest BPM and response i am not getting back in .
interface names
filereq_MI >Filetoabstract_MI>Sync_MI>RFCtoabstract_MI>Fileres_MI
(abstract means its an abstract interface)
i have configuered the Integration process as follows
Start>Recieve>synch_send>send>end
step : Recieve
mode : asynch
message:Filetoabstract_MI
step : synch_send
mode : synch
synch interface : synch_send
req message:Filetoabstract_MI
res message : RFCtoabstract_MI
step : send
mode : asynch
message:RFCtoabstract_MI
and i have given interface mapping during second (synch_send) step but here mapping is giving problem its showing exception error during mapping
error is there
1) Integration process ---> file
2) Integration process-->R/3 system

Hi,
Configure the Integration Engine According to this Blog and Trigger the Process again
Configuration of a Central Integration Server
Regards
Seshagiri

A file to fle scenario

Hello:
My scenario is file-to-file.during onward journey,it was right.The status is DLVD(test configuratin is right too),but there are no messages during return journey.
My receiver adapter is right ,but there are no xml files in receiver directory .Anyone could help me?

Hi Xinjiang,
you can follow up by this way step by step
1)check the read and right of your folder from where filed is picked up
2) then check read and right property of your output folder give this folder all rights
3) check your FTP settings
4)thenn check in sxmb_moni
5_ then check through RWB=>adapter engine=>message monitoring there you will find a complete log of message flow in the tab audit log
now HTTP response contains status code 403 means The server understood the request, but is refusing to fulfill it.
Authorization will not help and the request SHOULD NOT be repeated.
If the request method was not HEAD and the server wishes to make
public why the request has not been fulfilled, it SHOULD describe the
reason for the refusal in the entity. This status code is commonly
used when the server does not wish to reveal exactly why the request
has been refused, or when no other response is applicable.
for more details you can refer to the following links
http://www.web-cache.com/Writings/http-status-codes.html
http://www.web-wise-wizard.com/server-side/http-v11-status-codes.html
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
proposed solution : first you check whether you have given right credentials.
If credentials are right then you check by restarting the server. hope this will solve your problem
Thanks
Sandeep Sharma
PS:if helpfull then plz reward points

File to Proxy Scenario using ABAP Class and DB Multi Connect

Hello Friends,
I have a scenario below and a proposed solution. I would like some input as to whether i am headed the right way.
Scenario: Thousands of records come in from the legacy accounting system. The fields of these records need to be mapped to SAP fields using cross-reference tables stored in DB2. Finally, summarize the records by deleting a few fields and feed to R/3.
Solution i proposed:
(1) File Adapter is used to send the file
(2) Although JDBC adapter comes first to mind but since i need to access the DB2 tables multiple times for each record i propose to use an ABAP class for the mapping. Within the ABAP class the intent is to open an database connection to DB2, read the relevant cross tables using native SQL and finally generate the output XML.
(3) Reciever is Proxy which feeds this generated XML to SAP for creating posting via BAPI_ACC_DOCUMENT_POST
Question: Is the above solution correct or is there a better method to implement this scenario?
Please let me know.
Thanks,
Minhaj.

Looks fine. Few observations -
1. Whether it is ABAP class or Mapping in RFC lookup, you are making multiple trips to the database.
2. It looks like PI is being used only for reading the file and converting it to XML.
3. If using PI is not mandatory, then a complete ABAP class on ECC it self would be faster than swtching between PI Java, PI ABAP then round trips to DB2 finally data push to ECC.
If you could look at something like fetching all the required RFC look up data in one go and then map the fields according, might save u on processor and network resources.
VJ

Error in File to JDBC Scenario using File Content Conversion.

Hi ,
I am sending a text file in CSV format, with all the configurations done in the sender and receiver channels.
But the adapter monitoring says this:
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter 'EmployeeDetails.fieldFixedLengths' or 'EmployeeDetails.fieldSeparator' is missing
Consistency check: no. of arguments in 'EmployeeDetails.fieldFixedLength' does not match 'EmployeeDetails.fieldNames' (0 <> 6)
One thing to note here is that
1. EmployeeDetails.fieldSeparator is given as ','
2. I haven't used any fieldFixedLengths.
Pointers in this regard would be higly appreciated.
Regards,
Younus

cross check if you have specified EmployeeDetails.fieldFixedLengths and EmployeeDetails.fieldSeparator. only one must be used.
in case you have already specified,
EmployeeDetails.fieldSeparator as ',' , then delete that line and reenter the details again, activate and run the scenario.

File to RFC Scenario using BPM

Hi,
Scenario:We have to post data 1 by 1 to SAP and also handle errors
The file will be picked by the sender file adapter and given to bpm,bpm (uses message splitting) posts the data one by one to the sap r/3 system using receiver rfc adapter.
errors could be due to connectivity..in this case we need to send alerts to users uing alert framework.
good blogs or docs or ppt/pdf explaining a similar kind of scenario, will be highly helpful.
thanks,
younus

hi
for this u need the concept of ALERTs creation.
U can use the following links to create alerts;
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
XI ALerts with container elements - /people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/5e073c8e56f658e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2327---- [original link is broken] [original link is broken] [original link is broken]> [original link is broken] Trouble shoot alert config
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw2004s/helpdata/en/9c/34193cb4f5131de10000000a11405a/content.htm--SAP LIBRARY
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm -->Categories
rewards points if helpful
ragards
sreeni

File -- IDOC scenario using XI 3.0

Hi
I tried out a simple flat file to IDOC scenario using XI as the middleware and tried to post documents of type CREMAS03 on the backend R/3 system.
Now, I see that there is an IDOC number generated in the XI layer by the IDOC adapter. This IDOC number is seen under <SAP:DOCNUM>XXXXXXXXXX</SAP:DOCNUM>in the
Response-->IDOCOUTBOUND section of the pipeline in SXMB_MONI
According to SAP documentation :
<b>To enable you to select IDocs in the target system later on, the system transfers the message GUID and the IDoc number in the ARCKEY field of the IDoc control record.</b>
Now, I do find the XI msgid given as arckey in the control record of the Inbound in the target R/3 backend system. But I cannot find the XI IDOC number being cross referenced in the control record of the IDOC in the R/3 backend.
1.Is there a way to cross reference the IDOC number in XI with the IDOC number in the R/3 backend ( we have two different IDOC numbers, right ) i.e a IDOC number to IDOC number cross referencing in this File-->IDOC inbound into the R/3 system scenario involving XI
2. In the XI box, do we get as a part of async.reponse from the R3 system, the IDOC number that is created within the R3 system ? This would serve directly as a cross reference. Or do we have to indirectly query EDIDC table in the R/3 backend with the arckey value = msgid in XI - to retrieve the IDOC number created in the R3 backend ?
Thank you in advance for your time.

Hi,
Pls look into following link about Acknowledgement.
http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
Pls note that , you can't get/receive the Acknowledgement for Sender File Adapter. Because File System acts as an Async system. But you can get the Idoc response and you can write it into another file. For this you need to use BPM.
Hope this helps..
Regards,
Moorthy

File To Mail Scenario Clarification

Hi!
Can someone help me with this....
1)In a File To Mail Scenario, while selecting the mail server, do we need to select only the mail server or we can select any server...I mean, when I was doing this scenario, I selected my Windows 2003 server....as the mail server and the url as smtp://ipaddress....Also, I tested it, by putting the Source payload in the FTP server......Then, used SXMB_MONI to check the file....I saw the success flag... My question here is, how to check the mail......Can, you give me the step by step instructions for testing the File to Mail scenario....
2)I loaded Eclipse on my system, How to open that (execute that)...I mean...I want to learn Java Mappings..Where should I put the code.....etc.... Step by step instructions with screen shots please....
Thanks....

>>2)I loaded Eclipse on my system, How to open that (execute that)...I mean...I want to learn Java Mappings..Where should I put the code.....etc.... Step by step instructions with screen shots please....
Open the "eclipse.exe" and go on help. It will say how to create your first java project. Once you are comfortable with tool then go for Java Mapping. (Efficient way of learning
thanks
Farooq

Test a file to fle scenario using NFS in 7.1

Similar Messages

Maybe you are looking for