Test Scripts cause OPM to freeze

I am on a different project in my company, and on this second project whenever I run the test scripts or open any test scripts, OPM will freeze up. What would cause this? On rules for the other project, things are pretty snappy.
The differences between the two sets is that on the second project (the one that freezes) there are a lot of warnings about inconsistent capitalization, many relationships in the tests are unknown, and many of the relationships in the tests are not containment complete. I am slowly taking care of these issues. Is it possible that any of these could cause testing to be extremely slow?

Hello, it seems that it really is not something i'm installation to make this defect:
is happening to me again, this time I have not even installed anything but to sync the address book.
it is possible to happen when I turn off the PC while the phone is stuck with itunes running?

Similar Messages

Error opening test scripts in Build and Debug with Screens

Hello,
I am testing scenarios in the Build and Debug with screens mode in OPM. I save each scenario as a test script by clicking the Export button and saving. Some test scripts are able to be opened again, yet when I try to open others, I get the error message shown at the link below and am unable to load the test script.
http://imgur.com/uqh80
This did not happen previously, it just started today. All of these test scripts were created today, and the attributes have not been changes since the test scripts were created. This is seriously hindering my scenario testing ability.
Does anyone know how to rectify this problem?
Thanks,
Christine

Hi Kristy,
I am in OPM 10.2.
To troubleshoot, I tried redoing the test scenarios that werent working from scratch (rather than building off a previous scenario), and this time it worked. I am not sure why it works now and didnt before, and I am also not sure if they will continue working.
I will continue creating the scenarios and will be sure to update if it fails again. In the case it does fail, I will try your export recommendation.
Christine

Internet Causes Mac to Freeze Up

SilSiliMac 27" (Late 2012)
3.4 GHz Core i7
32 GB DDR3-1600
GeForce GTX 680MX 2GB
OS X 10.8.3
Safari 6.0.4
I was watching Netflix on the left side of the screen and reading about computer hardware on the right side, both using Safari. Then the screen froze and the cursor froze one second afterwards. I could still hear audio, but the computer was unresponsive: Force Quit didn't work, mouse didn't move, no keyboard input, etc. I held down the power button to force shutdown and then powered it back up again.
The same thing happened about an hour later. I did a full system scan for viruses and malware using two different utilities, both of which reported a clean iMac. I checked the hard drive with Disk Utility and got nothing. I started up using Apple Hardware Test (hold D while booting) and did a quick test which reported nothing. The full test, with 32GB of RAM, will take an entire day.
I have noticed this freezing up when watching video online, mostly through Netflix, but also through YouTube and Vimeo. I thought it was Safari, but I tried it with Firefox, Chrome, and Opera and they all end up freezing at some point. I can't tell how I'm making it freeze or how long it takes to freeze, but it happens when viewing video. It does not happen when watching video through iTunes - only online, regardless of playback method (Flash and   Silverlight both cause it).
I dual-boot Windows and do not have the problem in Windows 7.
I thought it might be a problem with my video card, but I can play FIFA and Skyrim for a couple hours without issue. I thought it might be a problem with Flash, but as far as I can tell Netflix uses Silverlight and that was what caused the initial freezes.
Any ideas?

I'm not really sure what you're looking for. This is some of the lines from Console before the most recent BOOT_TIME. Then I pasted the contents of System Diagnostic Reports Kernel_2013_04_27 etc., but I don't know if that's what you're looking for. That report was awhile ago, so it doesn't seem like any of my recent problems have been recorded.
5/9/13 10:07:55.471 AM mdworker[459]: Unable to talk to lsboxd
5/9/13 10:07:55.511 AM sandboxd[460]: ([458]) mdworker(458) deny mach-lookup com.apple.ls.boxd
5/9/13 10:07:55.515 AM sandboxd[460]: ([459]) mdworker(459) deny mach-lookup com.apple.ls.boxd
5/9/13 10:07:55.000 AM kernel[0]: Sandbox: sandboxd(460) deny mach-lookup com.apple.coresymbolicationd
5/9/13 10:15:56.184 AM mdworker[485]: Unable to talk to lsboxd
5/9/13 10:15:56.238 AM sandboxd[487]: ([485]) mdworker(485) deny mach-lookup com.apple.ls.boxd
5/9/13 10:15:56.258 AM sandboxd[487]: ([486]) mdworker(486) deny mach-lookup com.apple.ls.boxd
5/9/13 10:15:56.000 AM kernel[0]: Sandbox: sandboxd(487) deny mach-lookup com.apple.coresymbolicationd
5/9/13 10:17:22.000 AM kernel[0]: AppleBCM5701Ethernet:        0        a BCM5701Enet::replaceOrCopyPacket timedout
5/9/13 10:19:32.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=500[GoogleSoftwareUp] clearing CS_VALID
5/9/13 10:19:56.870 AM mdworker[502]: Unable to talk to lsboxd
5/9/13 10:19:56.934 AM sandboxd[504]: ([502]) mdworker(502) deny mach-lookup com.apple.ls.boxd
5/9/13 10:19:56.954 AM sandboxd[504]: ([503]) mdworker(503) deny mach-lookup com.apple.ls.boxd
5/9/13 10:19:57.000 AM kernel[0]: Sandbox: sandboxd(504) deny mach-lookup com.apple.coresymbolicationd
5/9/13 10:32:02.000 AM bootlog[0]: BOOT_TIME 1368113522 0
Interval Since Last Panic Report: 3314726 sec
Panics Since Last Report:          1
Anonymous UUID:                    D84038B4-E2E5-FDC9-B5D3-481682E2AD11
Sat Apr 27 15:36:40 2013
panic(cpu 6 caller 0xffffff8008ab7e95): Kernel trap at 0xffffff7f8aeba2ce, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000b528000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0xffffff804bad0800, RCX: 0x7fffffffffffffff, RDX: 0x0000000000000040
RSP: 0xffffff83983cba90, RBP: 0xffffff83983cbab0, RSI: 0x0000000000000002, RDI: 0x0000000000000000
R8: 0x0000000000000011, R9: 0x0000000000000000, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0x0000000000000111, R13: 0xffffff804aa90800, R14: 0xffffff8063bac000, R15: 0xffffff804aa90800
RFL: 0x0000000000010246, RIP: 0xffffff7f8aeba2ce, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff83983cb730 : 0xffffff8008a1d626
0xffffff83983cb7a0 : 0xffffff8008ab7e95
0xffffff83983cb970 : 0xffffff8008acd4dd
0xffffff83983cb990 : 0xffffff7f8aeba2ce
0xffffff83983cbab0 : 0xffffff7f8aeb6b1e
0xffffff83983cbb20 : 0xffffff7f8aeb4cf0
0xffffff83983cbb40 : 0xffffff8008e308db
0xffffff83983cbb80 : 0xffffff8008e303fe
0xffffff83983cbc10 : 0xffffff8008e2c390
0xffffff83983cbc50 : 0xffffff8008e2c09f
0xffffff83983cbc90 : 0xffffff8008e2bf54
0xffffff83983cbcd0 : 0xffffff7f890562bd
0xffffff83983cbd00 : 0xffffff7f89056b68
0xffffff83983cbda0 : 0xffffff7f89a22ad7
0xffffff83983cbdd0 : 0xffffff7f89a225b9
0xffffff83983cbe40 : 0xffffff7f89a21f6c
0xffffff83983cbe60 : 0xffffff8008e308db
0xffffff83983cbea0 : 0xffffff8008e303fe
0xffffff83983cbf30 : 0xffffff8008e2c390
0xffffff83983cbf70 : 0xffffff8008e30f59
0xffffff83983cbfb0 : 0xffffff8008ab2977
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f89040000->0xffffff7f8909bfff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f89017000
         com.apple.driver.AppleUSBComposite(5.2.5)[EB8C0C1A-8DB0-396C-AD77-5390E817381B] @0xffffff7f89a21000->0xffffff7f89a27fff
            dependency: com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f89040000
         com.razer.common.razerhid(1.5)[4C322766-8C83-E164-64F0-64CD0173060E]@0xffffff7f 8aeb3000->0xffffff7f8aec7fff
            dependency: com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f89040000
            dependency: com.apple.iokit.IOHIDFamily(1.8.1)[FD2B6401-9BFA-32D5-ABEB-E523C061548D]@0xffff ff7f891ca000
            dependency: com.apple.iokit.IOUSBHIDDriver(5.2.5)[547419EB-025B-3C4D-AAE1-89316747D025]@0xf fffff7f8924a000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000008800000
Kernel text base: 0xffffff8008a00000
System model name: iMac13,2 (Mac-FC02E91DDD3FA6A4)
System uptime in nanoseconds: 342990285795937
last loaded kext at 342990271437807: com.razer.common.razerhid    1.5 (addr 0xffffff7f8aeb3000, size 86016)
last unloaded kext at 341983256705407: com.apple.iokit.IOFireWireFamily    4.5.5 (addr 0xffffff7f890c1000, size 471040)
loaded kexts:
com.razer.common.razerhid    1.5
com.mice.driver.Xbox360Controller    1.0.0d11
com.apple.driver.AppleUSBCDC    4.1.23
com.apple.filesystems.exfat    1.3
com.apple.filesystems.smbfs    1.8
com.apple.filesystems.udf    2.3
com.apple.driver.AppleBluetoothMultitouch    75.19
com.apple.driver.AudioAUUC    1.60
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.iokit.IOBluetoothSerialManager    4.1.3f3
com.apple.filesystems.autofs    3.0
com.apple.filesystems.ntfs    3.10
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AGPM    100.12.87
com.apple.driver.ApplePlatformEnabler    2.0.6d1
com.apple.driver.X86PlatformShim    1.0.0
com.apple.driver.AppleHDA    2.3.7fc4
com.apple.driver.AppleUpstreamUserClient    3.5.10
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.GeForce    8.1.0
com.apple.driver.AppleMikeyDriver    2.3.7fc4
com.apple.driver.AppleIntelHD4000Graphics    8.1.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.1.3f3
com.apple.driver.AppleBacklight    170.2.5
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.AppleMCCSControl    1.1.11
com.apple.driver.ApplePolicyControl    3.3.0
com.apple.driver.AppleIntelFramebufferCapri    8.1.0
com.apple.driver.AppleSMCLMU    2.0.3d0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.3.1
com.apple.driver.AppleUSBHub    5.5.5
com.apple.driver.AppleSDXC    1.4.0
com.apple.driver.AirPort.Brcm4331    614.20.16
com.apple.iokit.AppleBCM5701Ethernet    3.6.0b1
com.apple.driver.AppleAHCIPort    2.5.1
com.apple.driver.AppleUSBEHCI    5.5.0
com.apple.driver.AppleUSBXHCI    5.5.5
com.apple.driver.AppleEFINVRAM    1.7
com.apple.driver.AppleACPIButtons    1.7
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.7
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard    170.2
com.apple.driver.AppleHIDKeyboard    170.2
com.apple.driver.IOBluetoothHIDDriver    4.1.3f3
com.apple.driver.AppleMultitouchDriver    235.29
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.kext.triggers    1.0
com.apple.driver.DspFuncLib    2.3.7fc4
com.apple.iokit.IOAudioFamily    1.8.9fc11
com.apple.kext.OSvKernDSPLib    1.6
com.apple.iokit.IOSurface    86.0.4
com.apple.nvidia.gk100hal    8.1.0
com.apple.NVDAResman    8.1.0
com.apple.iokit.IOBluetoothFamily    4.1.3f3
com.apple.iokit.IOAcceleratorFamily    30.14
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.1.3f3
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.AppleSMBusPCI    1.0.11d0
com.apple.driver.AppleSMBusController    1.0.11d0
com.apple.driver.AppleGraphicsControl    3.3.0
com.apple.iokit.IONDRVSupport    2.3.7
com.apple.driver.AppleHDAController    2.3.7fc4
com.apple.iokit.IOHDAFamily    2.3.7fc4
com.apple.driver.X86PlatformPlugin    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.3.0d51
com.apple.driver.AppleSMC    3.1.4d2
com.apple.iokit.IOGraphicsFamily    2.3.7
com.apple.driver.AppleThunderboltEDMSink    1.1.8
com.apple.driver.AppleThunderboltEDMSource    1.1.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.5
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOUSBMassStorageClass    3.5.1
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.driver.AppleThunderboltDPOutAdapter    1.8.9
com.apple.driver.AppleThunderboltDPInAdapter    1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.6
com.apple.driver.AppleUSBMergeNub    5.5.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.driver.CoreStorage    296.16
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.5
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.5
com.apple.driver.AppleThunderboltNHI    1.6.3
com.apple.iokit.IOThunderboltFamily    2.2.6
com.apple.iokit.IOUSBUserClient    5.5.5
com.apple.iokit.IO80211Family    522.4
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOAHCIFamily    2.3.1
com.apple.iokit.IOUSBFamily    5.5.5
com.apple.driver.AppleEFIRuntime    1.7
com.apple.iokit.IOHIDFamily    1.8.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220.2
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    345
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.7
com.apple.iokit.IOPCIFamily    2.7.3
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
System Profile:
Model: iMac13,2, BootROM IM131.010A.B04, 4 processors, Intel Core i7, 3.4 GHz, 32 GB, SMC 2.11f14
Graphics: NVIDIA GeForce GTX 680MX, NVIDIA GeForce GTX 680MX, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x04CD, 0x46332D313630304331302D38475351000000
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x04CD, 0x46332D313630304331302D38475351000000
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x04CD, 0x46332D313630304331302D38475351000000
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x04CD, 0x46332D313630304331302D38475351000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: APPLE HDD WDC WD10EALX-408EA0, 1 TB
Serial ATA Device: APPLE SSD SM128E, 121.33 GB
USB Device: Optical USB Mouse, 0x046d (Logitech Inc.), 0xc016, 0x14100000 / 2
USB Device: Razer Nostromo, 0x1532, 0x0111, 0x14400000 / 1
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: Cruzer, 0x0781 (SanDisk Corporation), 0x5530, 0x1a120000 / 4
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8511, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2412, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x828b, 0x1d181300 / 6

[CS4/5][JS] Script causes InDesign to crash

Hello,
I'm having a bit of an issue with some InDesign scripting i'm working on, and wonder if anyone else has had the same issue.
I have a script that uses app.dialog to prompt for user information. It then takes the result of that dialog, and uses it in the script. Pretty standard so far, and if i run this from the scripts panel, or from ESTK, it works fine. If I set it up as a Script Menu Action, when I run the script via the menu, it executes, then crashes InDesign.
I have tried this with multiple dialog's, and each time a dialog is called from a SMA, InDesign crashes. The following code is fairly pointless, but will cause InDesign to crash when the SMA is run.
//failTest.jsx
//Test script will cause InDesign to crash when the SMA is invoked
//Daniel Cole
//Wed Jun 09 2010 13:26:47 GMT-0400
#targetengine "session"
//set up the SMA and eventListener
var saTest = app.scriptMenuActions.add("Test SMA");
var elTest = saTest.eventListeners.add("onInvoke", function()
          alert(testFunc());
//Check for the menu, and create it if it doesn't exist
try{
    var menuTest = app.menus.item("$ID/Main").submenus.item("Test");
    menuTest.title;
catch (e){
    var menuTest = app.menus.item("$ID/Main").submenus.add("Test");
menuTest.menuItems.add(saTest)
//test function
//creates a dialog box with a text edit box
//returns the content of the text edit box
function testFunc(){
     testDialog = app.dialogs.add({name:"Enter Text:", canCancel:true});
          with(testDialog){
               with(dialogColumns.add()){
                    var getTextField = textEditboxes.add({editContents: "Test Text", minWidth:250});
     testResult = testDialog.show()
     if(testResult == true){
          var testText = getTextField.editContents;
          testDialog.destroy();
          return testText;
     else{
          return "No Text Entered";
          myFileDialog.destroy();
I've tried this on CS4 and CS5, on multiple installs, and it crashes every time. Can anyone else replicate this? Is this a known issue? Is there any way to work around it?
thanks,
Daniel Cole
Electronic Prepress and Automation Specialist
Disc Makers

I don't know exactly why your code crashes ID in some versions, but there are potential issues in using:
- unneeded global variables in a function scope,
- the with statement,
- the "var menuTest" redeclaration in the try...catch,
- a generic #targetengine "session" directive,
- menu and menuAction creation procedure without preventing object duplication (beware of application/session persistence),
- the myFileDialog.destroy() instruction when myFileDialog is unknown (in your original code).
In order to isolate the "destroy" bug, I suggest you separate the process from the menu installer (see http://bit.ly/cIsZuG for more detail about menu management).
Here is a possible structure:
#targetengine "DanielColeTest"
// YOUR PROCESS
// Use clean local vars within the func
var testFunc = function()
     var dlg = app.dialogs.add({
          name:"Enter Text:",
          canCancel:true
     var textField = dlg.dialogColumns.add().textEditboxes.add({
          editContents: "Test Text",
          minWidth:250
     var r = (dlg.show())?
          textField.editContents:
          "No Text Entered - Marc";
     dlg.destroy();
     return r;
var testInvokeHandler = function(/*onInvoke*/)
     alert( testFunc() );
// YOUR MENU INSTALLER
// Encapsulate the routine to avoid duplication issues
// - a SMA is session-persistent
// - a menu is application-persistent
var testInstaller = testInstaller||(function()
     var smaTitle = "Test SMA",
          mnuTitle = "Test",
          subs = app.menus.item("$ID/Main").submenus,
          sma, mnu;
     // 1. Create the script menu action
     sma = app.scriptMenuActions.add(smaTitle);
     // 2. Attach the onInvoke event handler
     sma.eventListeners.add("onInvoke",testInvokeHandler);
     // 3. Create and/or target the menu
     mnu = subs.item(mnuTitle);
     if( !mnu.isValid ) mnu = subs.add(mnuTitle);
     // 4. Create the menu item
     mnu.menuItems.add(sma);
     return true;
Hope it could help.
Regards,
Marc

Test Script execution failed.

I'm getting the Test Script Execution Error - "Test Script execution failed. Reason: The system cannot find the file specifiied"
This is happening to all my test script files. I can load the test script files, edit the test cases, etc, but cannot execute the test scripts
If I click on View Test Script Specification, they all come up, and the report shows all the cases in the test script.
If I look into the directory, they are all there, with the .tsc extension and a file type of TSC
I created a new TSC this morning, but with the same results
They were working yesterday. Since then, I did rename one of the test scripts, and changed my build platform from .NET to Java.
Any thoughts?
Thanks,
Allan Gibson
P.S. I also now note the my what-if analysis files do not run, and are getting a message: run time error '-2146233088 (80131500)': Batch process has failed. Reason: the system cannot find the file specified (OPA-E00241). When I press the debug button, I'm taken to a screen where the line "Call GetExcelCompilerProxy() .Analyze(ActiveWorkbood)" is highlighted in yellow.
Edited by: A Gibson on 11-Sep-2012 9:02 AM
Edited by: A Gibson on 11-Sep-2012 9:09 AM

Hey Allan,
It looks like it either can't find the Java component it needs to run or the test script for some reason. If you look in the bin directory of the OPM install (which is normally something like c:\program files\Oracle\Policy Modeling\bin) do you see a file called determinations-remote-clr.jar? If not it sounds like something's gone wrong with your install.
If so, can you run the test script in the standalone debugger? Also, if you look at the absolute path of your test script file, does it contain any non-ascii characters? If so, try removing those characters and see if it works.
Thanks,
Kristy

Test script specifications

I was wondering if there is a way of displaying the attribute that has been set in the test script, as the attribute text.
At the moment the test specs are being generated with long ID's. Most of the attributes that are being set are booleans so at this time haven't been given public names but it seems like creating public names for all attributes is a bit time consuming.
Without the use of either public names at this point, the test script specs do not make sense to someone who may be viewing them away from OPM
Hope this makes sense

The Display Text referred to in those options is actually set on the Outcomes tab of the test script. Since you have outcomes set for each of these booleans, you should simply be able to give them whatever Display Text you want without having to give each of them public names.
Davin.

Issues in Coded UI Test Script bulk execution

Hi,
We are using Coded UI for one of the dotnet web application in our project. We have automated more than 1000 scenarios using Coded UI. We are using the 4.0 framework. We have created multiple order tests(OT) with
80 test scripts in an order test file and give it for execution.
We have observed that few of the scripts which gets successfully executed in the debug and Run mode are getting failed while executing the same using the order tests. However, if we re-create a new order test by putting the failed
script as the first script in the order test, then the script is getting passed in the execution, but the others are getting failed. PFB the example,
Suppose OT1 has T1,T2,T3 scripts in the same order i,e T1,T2,T3. all the scripts i,e T1,T2,T3 run perfectly and gets passed individually in the debug mode and run mode. But if we execute the OT1 using the MsOrderTest Batch file, then only T1
is getting passed and T2 and T3 are failed.
In another scenario, if the scripts are ordered as T2,T3 and T1. Then after the OT execution, the result is only T2 is passed, T3 and T1 are failed.
I could not understand why the scripts are getting failed. Can someone provide some help here.
Please note:: All the scripts are hand written and not the recorded ones.
Thanks,
Venkat.

Hi Venkat,
>> Suppose OT1 has T1,T2,T3 scripts in the same order i,e T1,T2,T3. all the scripts i,e T1,T2,T3 run perfectly and gets passed individually in the debug mode and run mode. But if we execute the OT1 using the MsOrderTest Batch file, then
only T1 is getting passed and T2 and T3 are failed.
Could you share us the error message screen shot or the details error message about the T2 and T3?
Based on your description, it seems that it caused by the script. To find the root cause, I will recommend you run the Order Test in the Visual studio. If it could work correctly, I assume that there is something wrong in the script, and it would be helpful
if you could share us the script. The link below shows how to run tests from Visual Studio.
# How to: Run Tests from Microsoft Visual Studio
https://msdn.microsoft.com/en-us/library/ms182470.aspx
In my option, you could replace the T1,T2,T3 with other three simple methods in the class to check whether the script could work correctly.
In addition, I will recommend you to try to run the T1,T2,T3 independent to check whether the result web page of T1 is not the start of the T2.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Does Single Sign on feature affect the eCATT test script

Hi
I am having problem with eCATT test scripts when running on the PC with single sign on feature .
I am able to run the eCATT test script on PC with out single on feature .when I am trying to run the same eCATT script on the PC with single sign on feature it gives error message
When the test script is executed it open up new session and tries to log on system and then it comes out of the Session and gives the error message.
Error When starting replay session Possible causes
1) Scripting is deactivated in Replay system .
2)User has not logged on with in given time or user has no Dailog rights .
3) Too Many Sessions are open.
Can you please Suggest me how to overcome this problem .
The PC with single sign on feature is using SAP GUI 7.1 Version and the PC with out single sign on feature is using SAP GUI 7.2 Version . Will this affect the test script.
Thanking you .
Regards
Kiran

Hi
The issue is resolved . Once the single sing on program is disabled on the machine the eCATT test scripts are working fine now .
Thank you .
Regards
Kiran

Setting timeout for all the web test scripts in the solution

Hello,
I have around 16 web test scripts (using VSTS 2010 ultimate version) in my project (in a solution). By default the timeout set for each request is 60 sec. I need to increase the timeout to 180 sec. Currently, I am clicking on each request and modifying
the timeout parameter from the Properties window.
Is there any common setting for timeout available which would be acting across all the scripts?
Thanks.

Hello,
We only can set Timeouts for a separate request in Visual Studio Web Test. There is no way to set Timeout for all requests in VS IDE. But you can write you own logic code using
Timeout Property in a web test plugin to set Timeout for all requests in a web test.
About how to write a web test plugin, please see:
How to: Create a Web Performance Test Plug-In
Best regards,
Amanda Zhu <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

Urgent need for AP and PO test scripts/scenarios and training user manuals

Hi There,
Can anyone send me test scripts/scenarios and training user manuals for AP and PO
Please send me the docs as soon as possible on [email protected]
I will really appreciate your help.
Regards
Kush

Dear
this topics must be included in the testing scenario
1-Enter Supplier Data Enter information for a given supplier, including supplier sites/addresses
2-Create Invoice Batch: Enter information for Invoice Batch header
3-Create a Standard Invoice: Enter information for a standard invoice in an invoice batch
4-Invoice Distribution: Enter information details of a selected invoice
5-Schedule Payment Create Payment Schedule
6-Create a Credit Memo: Enter information to create a credit memo
7-Create Employee Exp:Enter information for an Employee Expense report
8:Validate an Invoice: Validate an Invoice
9-Account an Invoice: Create Accounting Entries for an Invoice
10-Create a Quick Check: Enter data to create a Quick Payment
11-Select Invoices for Payment:Enter data to create a preliminary list of invoices to pay, review the list, and do some changes.
12-Format and Print a Payment Batch: Perform tasks required to Format a payment batch
13-Confirm a Payment Batch:Perform tasks required to Confirm a payment batch
14-Transfer to General Ledger

Importing internal table data from FM to eCATT test script

Hi all,
I am working on Workflow project where by i need to post invoices related to purchase orders sent as scanned imaages. Incase all the data in the incoming invoice(scanned) is correct then i am using BAPI_INCOMING_INVOICE_CREATE to post the invoice.
But when the data is wrong, i need to give the user MIRO transaction pre-populated with the invoice details so that he manually corrects them(after verification) and posts the invoice.
I understand MIRO is an ENJOY transaction hence BDC doesn't work properly(i have tried with all kinds of options on recording and the problem comes incase of multiple POs) hence i choose to use eCATT.
The recording worksfine but my real problem is the PO data (multiple PO details for same invoice) is in table form. In all my previous objects related to eCATT we used to upload the file, hence no problem of importing tables.
But now as i'll call this test script from a function module which has all the POs in the form of internal table, i need to import this into my test script.
Please any body tell me how to proceed in this case or please suggest me a better a way to record the MIRO.
Thank you,
Lakshmi Narayana.S

Hello Raj,
First of all thank you for your inputs.
Yes, I know about Parking an invoice. even i am using it in some scenarios.
If everything on the invoice matches with the values in SAP then i am posting it using BAPI invoice_create also.
But for some scenarios like if the PO on the invoice doesnot match with actual PO then i need to create a work item in the Accounts Payable user's inbox and he will change invoice data manually (after getting confirmation and correction) and post it using MIRO.
Here i need to pre-populate the MIRO with the invoice data so that he can correct and post it.
Hence i was trying to write a BDC and as MIRO is an Enjoy transaction i thought writing a BDC is not a good idea (i tried writing BDC but had problems) hence i am using eCATT.
Hope i am clear about my problem. Any inputs to solve this are welcome.
Thanks,
Lakshmi Narayana.S

In eCATT, How to mention the values as input parameter during test script

Hi,
1. I am just learning eCATT tool. I created a Test Script by recording my transaction. But if i want to execute the recorded transaction with different data then how to store the values.
2. How to execute my Test Script created in one client to another client of same server. is it just by mentioning the target system or do we have to do anything in anothere client.
Lakshmi

Hi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e0ebec-c9da-2910-689e-b1a22a621c7f
Manoj Shakya.

Error opening a Test Script inUFT from Solution Manager

This error is the subject of a call with SAP and HP but I wondered if anyone else has come across this problem.
We work with Solution Manager 7.1 (SP11) and HP's UFT 11.53 to create automated testing. We ustilise the two free seat licences for UFT that are provided via enterprise support. We do not use HP's Quality Centre.
On some occasions when trying to open a test script for editing UFT tries to open and then closes again. The error message below is displayed in solution manager.
“External Test Tool Quick Test Professional Is Busy and Cannot Create a New Test Script”
When this happens the local cache files are wiped. We have managed to salvage some of these scripts by pasting in copies of the cache file from another PC but some we had to recreate from scratch.

If you don't have one already create a gateway instance on your Content Server.
Change or create the RFC destination : SAPKPROTP type = T
Check the radio button to start on Expicit Host
Enter the program = c:\winnt\sapkprotp.exe
Enter target host - use the hostname of the server for your Content Server
Enter the Gateway information
Regards,
Brian

Transaction to find ecatt test script

transaction to find ecatt test script and the table which stores ecatt test script
transaction to find function group and the table which stores function group
transaction to find general text and the table which stores general text
where i should be able to change the devlopment class

Hi Avinash,
For ecatts check development class/package SECATT_DDIC and transaction SECATT.
For general text transaction is SO10 and tables are STXH and STXL.
For Object Naviagtor SE80 you can change development class.
For function groups check ENLFDIR table.
All transaction codes are stored in TSTC and TSTCT tables
Thanks
Lakshman

Test Scripts for financials modules

Hi,
I am looking for detailed test scripts covering all test scenarios for system testing in financials modules. I am interested in Purchasing, Payables, Cash Management, Projects and Fixed Assets. I also need for Receivables and Order Management.
Do some body have this please let me know. If there is any website or download place where I can get this. Please let me know.
I am looking for a test script to show the purpose and results clearly including the gl accounts involved and the results in debiting and crediting the accounts in various transactions while doing the test. For ex. when you validate a PO matched invoice in Payables which accounts get affected and how etc.
Thanks in advance
Regards,

Pl do a search for "financials test scripts" in the forum search - this has been discussed and responded to many times before :-)
HTH
Srini

Test Scripts cause OPM to freeze

Similar Messages

Maybe you are looking for