Test whether data can be read successfully from the SLD

1. Test whether data can be read successfully from the SLD
This test attempts to read the number of business systems defined in the SLD. If this attempt fails, the test is considered to have been unsuccessful. If no business systems are found, the system gives a corresponding warning.
Could you plz give the navigation steps to perform above test ??
thanks
kumar

Generally SLDCHECK is the transaction used to test the connectivity to the SLD from your R/3 system.
Use the function module LCR_LIST_BUSINESS_SYSTEMS to get the list of Buiness systems configured in SLD.
***Reward points if useful.
Regards,
Kiran Bobbala

Similar Messages

  • How can I read books from the library on my iPad?

    I've downloaded Over Drive and Bluefire in an attempt to read books downloaded from the library.  Although both libraries say it's easy to transfer from my home computer to the iPad, nothing has worked so far.  Has anyone had success?

    Remove, but not uninstall from the device?  Where would they go if you did that?
    Once you delete an App it gets removed form the homescreen, and deleted from the iPad.
    There is no "Less used Apps" area or anything like that.
    Everything you have, and you can access, is on the home screen. There is no other place to access Apps. 

  • Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    Hello. Most of the engineers in developer exchange are more familiar
    with NI products. Contacting ICS for technical support is a better
    course of action.

  • Hi, I am using USB 8476s to communicat​e to a slave unit in LIN network using LabVIEW7.1​. Can anyone tell me how i can send a header file plus 1 byte of data to the slave in a LIN network. or how do i use ldf file. i want to read responses from the slave

    Hi,   I am using USB 8476s to communicate to a slave unit in LIN network. Can anyone tell me how i can send a header frame plus 1 byte of data to the slave in a LIN network. or how do I communictae with slave using LabVIEW7.1.
    I want to read responses from the slave. When i tried with labview exapmle programs or even using MAX also, while doing some switching action in my slave, i am getting response as Device inactive with timestamp but there is no data format. 
    And I have Lin Description File. Can you suggest me how to use ldf file.
    I am at customer place and It would be great help from you if you can suggest me at the earliest. Thank you

    you may use the LDF Starter Kit to use LDF informations in your application
    http://joule.ni.com/nidu/cds/view/p/id/665/lang/en

  • Can I back up my old iPhone and transfer data to my new iPhone from the computer at the same time?

    Can I back up my old iPhone and transfer data to my new iPhone from the computer at the same time?

    iOS: Transferring information from your current iPhone, iPad, or iPod ...

  • How can I read weight from scale

    Hi,
      I want to setup SAP so that HUPAST transaction can read the weight from the scale. I could see that it looks for an RFC destination and scale name etc. But didnt succeed in creating the RFC destination
    Please let me know if a third party software is a MUST or SAP has an inbuilt software for reading scales, if so how can we configure it. We are on ECC 5.0
    Thanks for reading.

    After a few more experiments, you can get correct values from the 'bounds'-descriptor.
    function getTextExtents(text_item) {
      app.activeDocument.activeLayer = text_item.parent
      var ref = new ActionReference()
      ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") )
      var desc = executeActionGet(ref).getObjectValue(stringIDToTypeID('textKey'))
      var bounds = desc.getObjectValue(stringIDToTypeID('bounds'))
      var width = bounds.getUnitDoubleValue (stringIDToTypeID('right'))
      var height = bounds.getUnitDoubleValue (stringIDToTypeID('bottom'))
      var x_scale = 1
      var y_scale = 1
      if (desc.hasKey(stringIDToTypeID('transform'))) { 
      var transform = desc.getObjectValue(stringIDToTypeID('transform'))
      x_scale = transform.getUnitDoubleValue (stringIDToTypeID('xx'))
      y_scale = transform.getUnitDoubleValue (stringIDToTypeID('yy'))
      return { x:Math.round(text_item.position[0]), y:Math.round(text_item.position[1]) , width:Math.round(width*x_scale), height:Math.round(height*y_scale) }
    I tested that this returns correct values both when image and text box get scaled. There is some strange Photoshop behaviour to note though:
    bounds.left seems to be always 0 like one could assume
    bounds.top on the other had is most times -1-3px. This probably corresponds to the amount the actual text rises above the text box. I feel it's a bug, i.e. it should be part of content bounding box, not the text area. But maybe it's like it was specced and I'm just interpreting it wrong.
    x_scale and y_scale seem to be always equal. For example if you create a 100x100px text box and scale it to 200px horizontally, both x_scale and y_scale will be 2 and text_item.height will be 50.

  • How can I read channels from different SCXI modules simultaneu​sly?

    Hello.
    I have a system that consists in:
    - Three E-series DAQ boards (PCI-6034, PCI-6052 & PCI-MIO-16E)
    - One SCXI chassis (SCXI 1001)
    - 4 SCXI modules for voltage measurement connected to PCI MIO 16E
    - One SCXI module for strain gauges connected to PCI 6034
    - One SCXI module for accelerometers connected to PCI 6052
    I have to develop a software application that reads all the channels at the same time or at least in the same program cycle. I have tried to create only one DAQmx task containing all the channels, although they belong to different DAQ boards (and SCXI modules, of course), but it seems to be impossible to use channels from different devices in the same task.
    So I have created three different DAQmx tasks, one for each device and its channels. I have used one "DAQmx Start Task" VI for each task at the beggining of the loop in order to use them independently, reading their channels inside the loop in every program cycle.
    When I have run the program I have get the following error:
    "ERROR -200619 ocurred at DAQmx Start Task.vi
    Chassis cannot be used for more than one scanning operation at the same time.
    Do only one scanning operation or combine multiple scanning operations into a single operation."
    What is the problem? How can I combine these multiple scanning operations? What can I do to read all channels at the same time?
    Thanks.

    Hello pablomendana,
    it's ok that you got an error when trying to use more than one device on the same task. According to the setup you have, I agree that 3 tasks should be put in place.
    The key question I have is... Have you configured manually at MAX the SG and accel. modules to be in Parallel mode?
    I would not expect the error you get if they are in parallel mode (in which you could even read directly from the DAQ board, using DAQ device channels instead of SCXI channels).
    Unfortunately, I haven't been able to setup a system similar to yours, but I would like to know more details on what you've tried so far.
    Also, I recommend you that if still need help on setting up the system, use NI's SSP program to get support from your local NI Application Engineering organization, as this will be faster than the forum.
    Regards,
    Jorge M.

  • When Firefox last automatically updated, it suggested that Adobe reader needed updating, now, with Adobe Reader 8, I can no longer print from the internet, only to file. Help please.

    When Mozilla Firefox last automatically updated, it suggested that Adobe Reader needed updating. After updating to Adobe Reader 8, I can no longer print from the internet, only to a file. I know the printer and its interface must be OK because Word prints normally.

    Problem solved, it was my oversight, I had not removed the check from the Print to File box in the print set up.

  • I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    How do you disabled it if running the same?

  • Hello.  I need help.  I use Photoshop Elements 10 on my MAC but it no longer reads discs.  Can I download it from the internet with my original package serial number?

    Hello.  I need help.  I use Photoshop Elements 10 on my MAC but it no longer reads discs.  Can I download it from the internet with my original package serial number?  thanks

    Yes, from here:
    Download Photoshop Elements products | 13, 12, 11, 10

  • How can we read filenames from a specific folder

    Hi forum,
    I have a situation that, there are several files coming daily in a specific folder.
    I want to read filenames from that folder and want to get that filename in a variable.
    That filename contains account nos. which I need for further processing.
    Now, how can we read filenames from a specific folder with using Oracle PL/SQL Procedure?
    Please suggest.
    Thanks & regards,
    Kiran

    If you are on 10g (not sure which exact release I'm afraid) you might look at Chris Poole's XUTL_FINDFILES that lists the files in a directory using PL/SQL and DBMS_BACKUP_RESTORE.SEARCHFILES (all a bit undocumented as it seems to be provided as part of rman).
    The conventional (i.e. supported) approach is to use a Java stored procedure - there is an example on AskTom.
    Message was edited by:
    William Robertson

  • Why "Outlook Express" users can't read email from Mail.app ?

    Why "Outlook Express" users can't read email from Mail.app ? Any explanation ? Select a good format,that's a good explanation,but i can't know each time if our recipients use "Outlook Express".

    There are no completely bug free email clients including the Mail.app and Outlook has its share of bugs for such an old/mature email clients and some glaring ones that MS has been aware of for a long time but has chosen not to do anything about since these do not affect exchanging email with other Outlook users.
    Outlook has always had problems with Mail's RTF and the degree depending on the Windows and Outlook versions used by the recipient.
    Check this link.
    http://homepage.mac.com/thgewecke/woutlook.html

  • SAP XI 3.0 - Error while reading the ID of own business system from the SLD

    Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100. 
    I get this error in the SXMN_MONI.  The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
    I could able to get "SUCCESSFULLY PROCESSED" in development and production.  But only in Quality I getting this error.  Could anyone help me to fix this issue.
    thanks...

    Probably, its due to incorrect RFC Adapter properties in config.
    Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click  on Service-->Adapter Specific Parameters.
    Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
    If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
    After this, you can retry sending the message.
    Rgds
    R Chandrasekhar

  • Error while reading the ID of own business system from the SLD for system

    Hello,
    I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>ZTA</SAP:P1>
      <SAP:P2>013</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can anybody help me?

    Probably, its due to incorrect RFC Adapter properties in config.
    Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click  on Service-->Adapter Specific Parameters.
    Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
    If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
    After this, you can retry sending the message.
    Rgds
    R Chandrasekhar

  • Unable to read payload from the message object

    Hi
    I have a scenario where i am send request to http receiver and getting the response. When I am testing through WFETCH it is working fine. But when i am testing through XI I am getting the follwoing error
    Unable to read payload from the message object
    I have tested the XI payload in mapping. I have done all kinds of testing but it is still giving the same error.
    One more strange thing is
    I have done one BPM scenario where Data is coming from Source to BPM( which is asyn) and then from it will go from BPM to Target (which is sync) But when I am checking the SXMB_MONI... it showing the messages like this
    Source to BPM
    Target to BPM
    Target to BPM.
    But i think it should show message like
    Source to BPM
    BPM to Target
    Target to BPM
    why i am getting the flo

    Hi
    Check with the connection string & Authorization of user you have used.
    MSSQL string is
    jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
    While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
    Thanks
    Gaurav

Maybe you are looking for

  • Quality of facetime camera is so bad

    I got a new 27'' imac and I'm really diasappointed about the camera. apple announces it as "Get everyone in the picture with crisp, widescreen HD video. The built-in720p FaceTime HD camera lets you make video calls that are so clear, it seems like ev

  • Exchange Rate from Exchange Rate Table

    Dear All, Is there any way to make the system to take the exchange rate from the Exchange Rate table and not from the base document when we are "Copy To" functionality instead of "Copy From"? I unchecked "Use Document Exchange Rate When Copying to Ta

  • SOA Composer and editing Routing Rules

    I have been trying to edit my human workflow routing rules decision table from the SOA Composer web interface. the routing rules appear in the list of ruiles available to open and edit but when I open the routing rules it defaults to the IF/THEN view

  • Can i use post-gre with ADF -BC ?

    Hie I do have postgre database with me.. and can i use ADF-BC with it? Vik

  • Copying multiple rows of different formatting

    My table is a Cue Sheet for a theater production. I have 3 rows of various information that together describe everything for just 1 Cue. So these 3 rows of differently formatted information is all for just one "Cue row". So in essence, these 3 rows a