Text distortion when converting from QuickTime to Flash

I am converting a QuickTime video to Flash format. Both have
the same pixel dimentions - 200 x 150 - so I don't need to resize.
I am using the default "flash 8 - high quality" settings.
However, there is some large text on the opening screen of
the video that looks fine before conversion, but is distorted after
conversion. Any ideas how to fix?
Edited to add that I am using the Flash 8 Video
Encoder.

+*Resize Filter: Nearest Pixel*+
+*Deinterlace Filter: Fast (Line Averaging)*+
Try changing these settings to better. The best setting will definitely look better than the fast settings. If your very picky about how your video looks and have the time to kill try best.
Since your using multi-pass for the h.264 frame control, frame control will be read/used for each pass, adding (a lot) to the time of the encoding. One work around is to use Pro res to encode the video using frame control and then link (target) that encoding to the h.264 setting with frame control off.
Here's an excellent tutorial on using the link (target) function in Compressor:
http://pixelcorps.cachefly.net/macbreak-154-540p-h264.mov
One thing you need to set for the h.264 encoding that isn't mention in the above tutorial. In the Inspector/Geometry window for the h.264 encoding you need to set the video dimensions. You'll notice it is set to Automatic with no video dimensions. For some reason you'll get an error if the video dimensions aren't set.

Similar Messages

Text reflow when converting from rgb spot color to process black

The setup that I'm using is a G5 Mac OSX, version 10.4.11. The InDesign application is CS3, version 5.0.3. The fonts are loaded into Extensis Font Reserve, server 1.7.4. The InDesign document has a text box using 2 different font sets. One set, Helvetica Neue, uses the rgb spot color. The other one, a mixed set of New Century Schoolbook, is used for a paragraph which is process black. When deleting the rgb spot color from the swatches and converting it to process black, the New Century Schoolbook reflows which had already been process black.
If I just select the Helvetica Neue type and change that line to process black there is no reflow problem.
When I tried this document on another Mac with the same set up there was no reflow. Is this an InDesign preference problem? Thanks

If you change the color back and then back again, do you get more reflows?
The reason I ask is that when InDesign opens a document, it holds the existing composition of stories until you apply any edit. So, it could be that what you're seeing here is that yours and your user's setups are different enough that reflow is inevitable the moment you edit the text, and changing the color counts as editing.
Dave

How do I keep my original text colours when converting from Publisher 2007 to PDF format?

Recently I am finding that when I convert my Publisher 2007 documents to PDF, the text colours do not remain the same, but revert to black or grey? Clip art retains its colours. What am I doing wrong?

They won't show up unless
you have click on each text box
Go Format > Shape
click on lines
chose desired line color for the borders.
once the Borders a colored they will show up in the created PDFs.

Document text shifts when converting from Word

I'm getting so frustrated. I am converting Word 2003 documents to Acrobat 8 pdf's. Without fail, the document size shifts upon conversion. So, if I have a table, the PDF is smaller than the Word version. I tried making Acrobat my default printer and then creating the document in Word and converting it to PDF, but that doesn't seem to help.
Any ideas on how I can stop this?

Try printing to the Adobe PDF printer if that is not the procedure you have been using. May not fix the problem, but worth the try. Check the printer properties, there are often options for shrink to fit and such. Also look at the print preview and be sure it is not a WORD option!

Overflow when converting from "1.64174e+11"

Hi ,
I am working on PS module and facing the above mentioned error.Whenever I am attching any material haveing value more than Rs 100000 the system gives "Overflow when converting from "1.64174e+11""
The detailed error description is given below,
Runtime Errors         CONVT_OVERFLOW
Except.                CX_SY_CONVERSION_OVERFLOW
Date and Time          24.11.2008 11:19:23
Short dump has not been completely stored (too big)
Short text
     Overflow when converting from "1.64174e+11"
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPFV45P" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "KALKULATIONSWERT_UEBERNEHMEN" "(FORM)", nor was it propagated by a
      RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "1.64174e+11", an overflow occurred.
Missing RAISING Clause in Interface
     Program                                 SAPFV45P
     Include                                 FV45PF0K_KALKULATIONSWERT_UEBE
     Row                                     8
     Module type                             (FORM)
     Module Name                             KALKULATIONSWERT_UEBERNEHMEN
Trigger Location of Exception
     Program                                 SAPFV45P
     Include                                 FV45PF0K_KALKULATIONSWERT_UEBE
     Row                                     140
     Module type                             (FORM)
     Module Name                             KALKULATIONSWERT_UEBERNEHMEN
Source Code Extract
Line SourceCde
110       MTCOM-MATNR = VBAP-MATNR.
111       MTCOM-BWTAR = VBAP-BWTAR.
112       CALL FUNCTION 'MATERIAL_READ'
113            EXPORTING
114                 SCHLUESSEL    = MTCOM
115            IMPORTING
116                 MATDATEN      = MBEW
117            EXCEPTIONS
118                 ERROR_MESSAGE = 04
119                 OTHERS        = 04.
120       MOVE SY-SUBRC TO SAV_SUBRC.
121     ENDIF.
122
123     IF T685A-KRECH = 'C'.
124       IF SAV_SUBRC = 0 AND MBEW-PEINH NE 0.
125         KOMV-KPEIN = MBEW-PEINH.
126       ELSE.
127         KOMV-KPEIN = 1.
128       ENDIF.
129 * Falls keine ET da, Zielmenge nehmen (Gut-/Lastschrift, Kontrakt ...)
130       DATA: DA_MENGE LIKE VBAP-KWMENG.
131       IF TVAP-ETERL EQ SPACE AND VBAP-KWMENG = 0.
132         DA_MENGE               = VBAP-ZMENG.
133       ELSE.
134         DA_MENGE               = VBAP-KWMENG.
135       ENDIF.
136       IF DA_MENGE > 0.
137         DA_WERT         = DA_WERT * KOMV-KPEIN * 1000
138                          / DA_MENGE * VBAP-UMVKN / VBAP-UMVKZ.
139       ENDIF.
>>>>>       KOMV-KBETR      = DA_WERT.
141     ELSEIF T685A-KRECH = 'B'.
142       KOMV-KBETR      = DA_WERT.
143     ELSE.
144       KOMV-KWERT      = DA_WERT.
145     ENDIF.
146
147     KOMV-WAERS         = DA_KALKO-FWAER.
148     RV45A-KOEIN        = DA_KALKO-FWAER.
149     KOMV-KMEIN         = VBAP-MEINS.
150     PERFORM KOMV_PRUEFEN USING SPACE
151                          CHANGING SY-SUBRC.
152 * Nur für den ersten Lauf prüfen, ob Status gesetzt werden muß
153     IF SAV_INDEX = 1.
154       DA_SUBRC = SY-SUBRC.
155     ENDIF.
156     IF SY-SUBRC = 0.
157       PERFORM KOMV_BEARBEITEN.
158     ENDIF.
159   ENDDO.
Pl suggest.
Rgds

Hi,
Try to declare your variable using Packed Number:
DATA: va_num TYPE P DECIMALS 3.
Hope this helps.
Patrick

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe.

Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?

Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?
Depending on the system version, and Office Word version:
- a pure URL link starting with http or even www sometimes works in PDF, either produced by Aperçu or Adobe, sometimes does not work;
- other kind of links where the text under display is not a URL, never work!
I like everything with Apple computers and software, except PDF generation. Output files are usually bigger in size, and no better quality, than under Windows. Furthermore, it is weird that something as common as hyperlinks does not work correctly!
I related this question with Mac OS X Snow Leopard, but the problem is still there with Mac OS Lion.
This problem seems to have been around for years, without any proper solution from Apple and/or Adobe! To me, this is very embarrassing!

Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student

Formatting of text fields when exporting from InDesign to Acrobat Pro

How does one preserve the formatting of a text field when exporting from InDesign CS6 to Acrobat Pro? It loses both the font and the alignment formatting in the PDF.

Use a font that allows embedding/ check the font embedding settings in the PDF output settings.
Mylenium

How do I maintain column formatting when converting from PDF to Excel?

How do I maintain column formatting when converting from PDF to Excel? All info is no longer on the lines or in the columns they started out being in? Any help would be appreciated.

Sara,
Perhaps I am expecting too much from Adobe ExportPDF. The reason I subscribed to this service, for which I pay a yearly fee, was that I need a way to convert scanned and digital documents to Word &/or Excel. I read the link you included but to be candid the more I tried to understand what was written the more confused I got. The process should not be this difficult. Currently I am using a NEAT scanner to create PDF documents of whatever I scan. After I changed the OCR setting on Adobe ExportPDF the output was much better but not to the point it was usable as it was. Information that appears to be lines and columns are sometimes not recognizing two columns and just putting them together in one. Obviously not usable. The other thing it does is bunch numbers that appear in a column that are just a bunch of numbers that I have no way of fixing.
Please let me speak to someone who can help me. Right now I not getting anything of value in my paid subscription.

Default PR Type when convert from Planned Order

Hi all,
How can I default my PR Type when convert from Planned Order after MRP run. This can done via MRP Group control but how to go about controlling via Planned Order profile?
Which planned object type and planned order profile to be used? assuming that i need my planned to be output at LA type and convert to NB1 PR type instead of the default NB PR type?
Thanks.
Regards,
Andrew

Hi,
The system determines the document type from the stettings u are making in "planned order Profile" in Customising for MRP. There u define the order type, the procurement key and the special procurement key and also the account assignment category. So based on the procurement key and the special procurement key maintained in the Marterial master, the document type is selected.
Production > Materials Requirement Planning > Procurement Proposals > Planned Order > Define order profile
Choose the planned order type - NB1 Within this you specify the P req doc type to be used.
Through MRP group and the different PR document type for MRP generated PR is possible only if you assign the document type to MRP group in the MRP configuration.
Please try and come back.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Aug 28, 2008 10:54 AM

Moving Scriptlet Code to backing bean when converting from JSP - Facelets

Hello!
We are converting our application from jsf1.2 to 2.0 and all jsps are being converted to XHTML. Some are trivial while others had very complex scriptlets.
I would like to know what are some of the recommended ways of moving Scriptlet Code to backing bean when converting from JSP -> Facelets.
I have thought about listeners, actionListeners, putting code getXXXX() of the backing bean and then calling #{bean.XXXX} but not sure whats the best way.
I do appreciate the response!
Eg of a jsp page:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="/WEB-INF/xxx-jsf.tld" prefix="l" %>
<%@ taglib uri="/WEB-INF/yyy-pp.tld" prefix="p" %>
<%@ page import="com.ttyy.search.beans.jsf.AdvancedSearchFormManagedBean" %>
<%@ page import="com.kkee.util.*"%>
<%
    AdvancedSearchFormManagedBean advancedSearchFormManagedBean = (AdvancedSearchFormManagedBean) request.getSession().getAttribute("AdvancedSearchFormManagedBean");
    if (advancedSearchFormManagedBean == null) {
       advancedSearchFormManagedBean = new AdvancedSearchFormManagedBean();
       request.getSession().setAttribute("AdvancedSearchFormManagedBean", advancedSearchFormManagedBean);
    advancedSearchFormManagedBean.initializeForAdvancedSearchOptions();
    advancedSearchFormManagedBean.setQuickSearch();
     request.setAttribute("portletHeader", "Hello " + advancedSearchFormManagedBean.getPerson().getFirstname() + ", check out the latest programs in your practice areas and jurisdictions");
%>
<h:form id="MYCenterForm">
     <p:portletRenderer portletSetName="test of portlet"
          portletContainer="#{PortletContainerManagedBean}"
          id="MYCenter"
          portletScope = "TEST_SCOPE"
          suppressIfNoData="true"
          portletSkinName="SOME_SKIN">
          <f:facet name="persistenceToolkit">
               <h:commandLink id="persistenceToolkitLink"
                    actionListener="#{PortletContainerManagedBean.persistPortletSetStateListener}">
                    <h:outputText value="Save State Of Portlet Set" id="persistenceToolkitLinkText"/>
               </h:commandLink>
          </f:facet>
     </p:pagePortletSetRenderer>
</h:form>
<%
     String flag = PropertyItems.getInstance().getPropertyItem("response.time.flag");
     if("1".equals(flag)){
          ResponseTime rt = (ResponseTime) session.getAttribute("responseTime");
        if(rt!=null){
            rt.setDesc("my cle loaded");
            long now = System.currentTimeMillis();
            long start = rt.getStart() + rt.getTotal();
            rt.setInterval(now-start);
            rt.setTotal(rt.getTotal()+rt.getInterval());
            LogUtil.log(rt.toString(), LogUtil.DEBUG_LEVEL);
            session.setAttribute("responseTime", rt);
%>

That helps.
This could be another topic question but itst kind of related to what i am doing right now. while converting JSP to facelet (in jsf2) I came across another issue.
<h:commandLink id="Save" rendered="#{RegistrationBean.isNOTInOrigionalRegistrationMode}" action="#{RegistrationBean.updateProfile2Submit}" styleClass="#{portalSkinManagedBean.contentPortletSkin.strongTextStyle}">
          <l:htmlSkinnedImage id="SaveImage" style="border:0;" url="save.gif" alt="Save Information"/>
</h:commandLink>When I click on the generated link, I get this. And this is happening for all the h:commandLink in the application.
http://localhost:9080/registration/updateProfile2.jsf[request.getQueryString()=null][request.getRequestedSessionId()=F1CCE237DD81D301F1C4DBA6910FFD8A][request.isRequestedSessionIdFromCookie()=true][request.isRequestedSessionIdFromURL()=false][request.isRequestedSessionIdValid()=true]Parameters:[rolePracticeAreasForm:title=rolePracticeAreasForm:primaryPracticeArea=10002javax.faces.ViewState=-2943345291093118815:-4400303399130292206rolePracticeAreasForm:practiceAreasMod2=10148.1rolePracticeAreasForm:practiceAreasMod1=10002.1rolePracticeAreasForm:Save=rolePracticeAreasForm:SaverolePracticeAreasForm=rolePracticeAreasFormrolePracticeAreasForm:otherField=rolePracticeAreasForm:fromMyAccount=1]||
javax.servlet.ServletException: Index: 0, Size: 0
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:325)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.legaledcenter.util.urlrewrite.UrlRewriteFilter.doFilter(UrlRewriteFilter.java:250)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.springframework.orm.hibernate3.support.OpenSessionInViewFilter.doFilterInternal(OpenSessionInViewFilter.java:198)
     at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.jscape.framework.galileo.support.upload.UploadFilter.doFilter(UploadFilter.java:71)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:547)
     at java.util.ArrayList.get(ArrayList.java:322)
     at javax.faces.component.AttachedObjectListHolder.restoreState(AttachedObjectListHolder.java:161)
     at javax.faces.component.UIComponentBase.restoreState(UIComponentBase.java:1427)
     at com.sun.faces.application.view.StateHolderSaver.restore(StateHolderSaver.java:121)
     at com.sun.faces.application.view.StateManagementStrategyImpl$4.invokeContextCallback(StateManagementStrategyImpl.java:289)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1253)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at com.sun.faces.application.view.StateManagementStrategyImpl.restoreView(StateManagementStrategyImpl.java:284)
     at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:177)
     at com.sun.faces.application.view.ViewHandlingStrategy.restoreView(ViewHandlingStrategy.java:119)
     at com.sun.faces.application.view.FaceletViewHandlingStrategy.restoreView(FaceletViewHandlingStrategy.java:434)
     at com.sun.faces.application.view.MultiViewHandler.restoreView(MultiViewHandler.java:143)
     at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:199)
     at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
     at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:110)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
     ... 22 more
********** Message End *************Thanks

Overflow when converting from "3.60001e+11"

Hi Guys,
I'm Working with my PO using MIRO, I don't know why the error occurs. I've used the SAP Version 620 but end up with an error, then used Version 710 and successfuly created the transaction, but I'm stacked with version 620. I'm not allowed to transact it using the Version 710 that's why im looking for a patch or upgrade within 620 that i can use so that it can be solve.
I'm in need of your help guys. I know there someone out there that can help me.
THE ERROR
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
       Occurred on     03/28/2011 at 01:00:47
Overflow when converting from "3.60001e+11"
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINS" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_CONVERSION_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"DISTRIBUTE_ACC_ASSIGN_RE" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When attempting to convert the value "3.60001e+11",
an overflow occurred.
How to correct the error
The exception must either be prevented, caught within the procedure
"DISTRIBUTE_ACC_ASSIGN_RE"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:

I won't post here if i already got the answer in SAP notes. I've spent 3 days searching for the answer. The only answer i got is the upgrade but can't be consider. OSS notes didn't provide me any answer. Hope u can help me
Edited by: docgon on Mar 30, 2011 2:38 AM

Upload maxdb really needed? - Overflow when converting from 32768

hello,
I am facing with a run time error that does not make sense when uploading maxdb database. The error is: "Overflow when converting from 32768".
I am following this configuration tutorial:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm
Anyway, is there a need to upload this database? We installed netweaver mobile with SQL server database.
Help please.
Thanks.
Edited by: João Carneiro on Feb 8, 2011 2:10 PM

Hi,
Uploading MAXDB is not mandatory. It is needed only when multiple devices need to be installed with MAXDB through setup or software packages, which helps administrator to roll out multiple devices, so that end users will get all the necessary software to install the device.
Hope this clarifies your query.
Thanks and Regards,
Suma

Grainy Image when converting from PAL to NTSC...

Hi,
I'm using Compressor 2.0.1 to convert a PAL movie to NTSC. I find that the output is extremely Grainy, the blacs are Muddy and the Highlights are colored.
Any suggestions?
Thanks and Regards,
Rajnesh

There are many options when converting from PAL to NTSC with Compressor's Frame Controls panel. Have you tried other settings? Note, however, that the highest quality settings are pretty slow so be prepared for a fairly long wait even on your Power Mac G5.
Otherwise, you might want to try the freeware utility JES Deinterlacer (available on VersionTracker.com). JES Deinterlacer is pretty fast at PAL <-> NTSC conversion and the results are better than you will get with the basic settings in Compressor 2.

Does anyone know a good converter from quicktime movies to dvd format?

Does anyone know a good converter from quicktime movies to dvd format?

I'm guessing that your using One Step DVD . This will only work with one movie at a time.
Create a new project and all you should have to do is drag your movies from your movie folder onto your iDVD project. You can add as many movies as you like but obviously you can't exceed the maximum total DVD size.
Encoding can take a long time depending on the original file format, but you should be able to use pretty much any file format you can play with Quicktime.
Message was edited by: Noiseboy2006

Text distortion when converting from QuickTime to Flash

Similar Messages

Maybe you are looking for