Text messages ringtones are not working in the Storm Two
Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon
Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L
Similar Messages
-
My text messaging app is not working PLEASE HELP!!!
My text messaging app is not working at all is a blank screen when I open it! Help!!!
No its a well known bug with iphones caused by their over complication of things and their complacency that their users will buy the phones on looks alone irrespective of its basic functionality.
Suggestion 1 - The most common suggested solution seems to be: iMessage needs switched off on all your devices and switched back on after a rest. I found that this did NOT work.
Suggestion 2 - Having a Wi Fi Signal seems to confuse iMessage to send an SMS as a text or as an iMessage. Turn off WiFi on your phone and manually send as text message. Slow, I lnow!!
Suggestion 3 - Move away from any wifi source ie out of range.
Suggestion 4 - Send an email, or a letter. Its more personal!!
20 Minutes later - still not sent 2 short texts.
Apple are very complacent and disdainful of their user community. Not what Id expect but this is a global corporation with the same business ethics as an Oil company or a car company. Profit not function. -
i have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.
You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html -
The MSS ECM FPM Steps are not working after the upgrade
Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.Kclinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000
-
My text messaging app is not working at all is a blank screen when I open it! Help!!!
Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work? -
The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
I get the message'You are not connected to the internet. Online functionality is not available' I am connected so what can I do?
Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset Network Settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- DId the iPod ever successfully connect to the network?
- Does the iPod successfully connect to other networks?
- Do other devices successfully connect with your network? -
my "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys aren't either? any help would be amazing! I use these keys a million times a hour and since I have switched to cc I cant get them to work. track selection makes no difference or if there are markers on the timeline or not.
Anyone else feel me on this?
any help?Well that still didn't make any kind of difference. I would just do without it but I've becomes really use to it with Avid for so long. I have to admit there are a lot of small moments like this that makes me miss Avid. Any other suggestions? I have checked the keyboard shortcuts a few times and maybe I'm just missing something here...
-
My message sounds are not working, or my game sounds...but my video is?
Never mind. I fixed it. Silent switch was stuck
-
I've updated my iphone 4 to ISO 5. I could not connect to icloud yet however does this expalin why some of the features of ISO 5 are not working like the camera lock screen feature?
Thanks
Cto see the camera icon, double-click the home button when you are on the lock screen. this will show the music controls and the camera icon. double click the home bgutton again to close them.
-
Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Has anyone got any suggestions. Thanks
If you don't tell us what solutions you've already taken, we're probably going to waste a lot of time telling you to do things you've already done.
-
I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
AND MY APPLICATIONS ARE NOT WORKING AT ALL
WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!If you do not have enough space, then you would have to free up more space.
You can also update via itunes on your computer. -
Tun miniport adapters are not working and the camera card reader is not working on a T61P.
The Microsoft tun miniport adapters #4,2, and 3 are not working. They display code 10 error message. Also the USB mass storage device (camera card reader) is not working.
I have tried to uninstall and update the drivers to no avail. I have used ThinkVantage Tool Box. It only lets me know that they are not working. It does say to reinstall them. I have tried. All effort has failed.
All was find until I ran several updates via ThinkVantage.
All suggestions would be appreciated.
Thank you,
TomYou will not lose data if you back up
Worth doing the basic troubleshooting
Reset
Restore best as new since you have issues ,then you will know if it has started to function correctly ,if not .....
Visit Apple store since if it isn't software probably iPhone is on it's way out -
Solved: message "You are not connected to the Internet" after idle sleep
Summary: What worked for me was to turn off IPv4 and IPv6 on my unused interface.
The problem was that after my computer had been in sleep mode, Safari would say:
"You are not connected to the Internet."
or "softwareupdate -l" would say:
"This computer’s Internet connection appears to be offline."
Yet Firefox worked OK and traceroute also showed the connection was fine.
Digging deeper (though only later, after I found the command), "scutil -r" indicated a problem with DNS lookup:
$ scutil -r developer.apple.com
Not Reachable
$ scutil -r 17.254.2.129
Reachable
I'm using 10.6.6 on a Mini (model Macmini1,1), which has a wired ethernet connection on en0 and an AirPort on en1. I use the wired connection, but I also configured the AirPort just because, and then turned it off in the network preferences. I use a static (manually-configured) IPv4 address on en0 and DHCP on en1 (when it's up, which is only for experimenting). I don't use IPv6 as such, though I've left it enabled.
I was initially confused, thinking the problem was intermittent, though it's not. I tended to assume that because the display had gone into standby the computer must be sleeping, without checking that the power light was dimming and brightening, indicating sleep mode. Later I found the "pmset -g" command to display the power management settings. Among the settings is:
ttyskeepawake 1
This means that if I had a shell session open in Terminal, which I did quite often when investigating the problem, the computer put itself into idle sleep later than if I didn't have the session open. The times in Energy Saver settings in System Preferences seem not to be very accurate anyway. For instance, with the default computer sleep and display sleep settings of 10 minutes and a shell session open, I've seen it take 17m25s for the display to blank and a further 14m16s for the computer to sleep, for a total of 31m41s.
The problem only occurs after an idle wait. It doesn't occur after a software sleep (entered from the Sleep entry in the Apple menu or using the keyboard shortcut) or after pressing the power button momentarily.
One way I found to fix the problem was to turn the AirPort on and then off again through Network Preferences (or the menu bar item). Later I found that disconnecting and reconnecting the ethernet cable also fixed the problem. I hoped to find a better way.
What led me to this halfway house solution was noticing that if I turned the AirPort on and then off again, entries for en1 still remained in the routing table. These entries were for IPv6 link-local and multicast networks, as in this edited output from "netstat -nr":
Internet6:
Destination Gateway Flags Netif Expire
::1 ::1 UH lo0
fe80::%lo0/64 fe80::1%lo0 Uc lo0
fe80::1%lo0 link#1 UHL lo0
fe80::%en0/64 link#4 UC en0
fe80::216:cbff:fexx:xxxx%en0 0:16:cb:xx:xx:xx UHL lo0
fe80::%en1/64 link#6 UC en1
ff01::/32 ::1 Um lo0
ff02::/32 ::1 UmC lo0
ff02::/32 link#4 UmC en0
ff02::/32 link#6 UmC en1
Even with the AirPort switched off, ifconfig showed it as being up:
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:17:f2:xx:xx:xx
media: autoselect (<unknown type>)
status: inactive
I don't know if these observations are relevant, but anyway they led me to the solution (well, workaround). The way I finally fixed the problem was as follows.
1. Create a new location in Network Preferences. (This isn't strictly necessary, but it allowed me to keep the AirPort configuration (including my wireless password) intact in the default Automatic location.)
* Click on the Location pull-down
* Click Edit Locations...
* Click +
* Enter new location name (I called mine Wired-static)
2. Configure the Ethernet interface with its static address. (If using DHCP, I'd have skipped this step as DHCP is the default.)
3. Go to the AirPort configuration (even though it's shown as Off).
* Click on Advanced
* Click on TCP/IP
* Select Off for both IPv4 and IPv6
4. After clicking Apply in Network Preferences, a new "Location" item appears in the Apple menu between "Dock" and "Recent Items". Select the new location. This setting sticks across boots.
I hope this helps anyone else in a similar situation. Maybe if you use wireless it would help to turn off IPv4 and IPv6 on the Ethernet interface?Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset Network Settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- DId the iPod ever successfully connect to the network?
- Does the iPod successfully connect to other networks?
- Do other devices successfully connect with your network? -
Cached credentials are not working on the lock screen (Windows 7)
Hello all,
We are having a difficult time trying to troubleshoot a problem with credential caching seemingly not working on the lock screen for our laptop users. Users are instructed to logon to the laptop while connected to the domain to cache their credentials. The
user then leaves the network, and is able to log in to the laptop using cached credentials. The laptop locks either due to a manual lock, or due to an inactivity timer. The user tries to relog and is presented with the error “no logon servers available to
service the request.” Users are reporting the problem from both home and public networks. We have been able to recreate the issue by logging on the laptop while in the office and setting our internal wireless network to manually connect, and then simply clicking
start > shutdown arrow > lock. Many users have reported that they were able to get back into the laptop after a hard shut down, but would be unable to log in again if they returned to the lock screen. One user has reported that selecting other credentials
> switch user > other user while on the lock screen and then entering in his DC credentials would allow him to get back into the laptop. I was unable to recreate this workaround on our test machine. I also tried to logon using the switch user account
with the “.\username” method to see if that would look for cached credentials. One user has reported that he was unable to hard shut down the computer to get back in. He also reported that he tried to pull the battery and give it time before trying again.
We have set the value for “Interactive logon: Number of previous logons to cache” to 50. The status of “Interactive Logon: Require Domain Controller to unlock workstation” is disabled. We have tried to turn the Wi-Fi switch off and then back on while on
the lock screen. Error logs that we think are related to the problem include – Event ID:5719, NETLOGON and Event ID:4343, NlaSvc error 0x4C6 and error 0x51
I have a slightly sinking feeling it has something to do with NLA thinking that they are connected to a domain while on the lock screen, but this is pure speculation. Thanks for reading my post and any potential solutions are greatly appreciated!I'd try them over here.
Windows IT Pro forums on TechNet
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Maybe you are looking for
-
Sales customer report shows this error
Hi , please how to resolve this error recently it showed this error ..i have send my log file error ..i am not figured out where the problem lies...its urgent ...greateful to all..please help me....this problem taken after creation of new legal entit
-
Connection timeout error in web report(portal)
Hi Experts, Points to note about the 500 connection timeout error 1. Error persists only in portal. query/ report works fine in RSRT and Bex Analyser. 2.As per previous discussions tried implementing SAP notes to change ICM parameter for max of 10 mi
-
How to view one cube from a different cube through a BADI
Hi I have two applications in my BPC. I need to process one application and for that lookup another application in a BADI. Can anybody suggest how this can be done. What command should be used for this.
-
Ipad 2 updating apps frozen tried everything nothing downloading and cannot fix
Someone please tell me how to fix this before i throw this out of the window!!!
-
Hi I want to have the "Edit in place" functionality in an ALV. Do you have an URL or example of how to do this? Thanx in advance