The Chinese character appear once i try to install itunes and the installation failed.
The Chinese character appear once i try to install itunes, i don't know what it said but i can't install it any solution to this? I wanna bring my info on iphone 4 to my iphone 5 which i just bought it recently after lost my last one
Uninstall iTunes and reinstall it.
Similar Messages
-
I'm having problems installing Itines on my new computer with Windows 8. I always get problem with install. the error code is 2503. How do I correct this?
Although you're getting a different error message, perhaps try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems -
Hi,This morning I had software updated my iPhone 4s and then I couldn't open again.One the iphone screen,it appears me to ask plug in iTunes and which i did but can't restart my phone.Please help me
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
When I try to install iTunes onto my new computer, it says "This installation package could not be opened. Verify that this package exists and that you can access it or contact the application vendor to verify to verify that this is a valid Windows Installer package." I can save iTunes onto my computer, but when I click run, this is the message that appears. How do I get this thing installed?
Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D. -
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Error 1327 invalid drive:E:\ appears when I try to install adobe reader, can anyone help?
Error 1327 invalid Drive: E:\ appears when I try to install adobe reader, can anyone help?
Hi Coralienz,
Can you please check the value of the registry entries at the following location: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
In case the values for any of the entries (i.e. Common AppData, Common Desktop, Common Documents etc.) is referencing to E:\, change the value back to look something like below and you should be good to go. -
wen i try to install itunes it say i have ti uninstall the old one so i try to uninstall it an it say something about the path
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
every time i try to install itunes on my laptop for windows i get the message''key not valid for use in specified state'' any clue?
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\<User>\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
when i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.
Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again. -
itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
Each time I try to install itunes I get a windows installer message telling me that the installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.....
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
When I try to install itunes 10.5.2, I get the following error message "The installer has insufficient privileges to modify this file c\progamfiles\itunes\itunes.exe and won't install. help
Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled -
I keep getting an error message that says "The administrator has set policies to prevent this installation" when I try to install iTunes. I have tried everything on the website. When i try to remove the components of iTunes I get the same message. How can I download iTunes?
Let's try something relatively simple. Download and save a copy of the installer to your hard drive (don't run the install on line and don't start the install just yet):
http://www.apple.com/itunes/download/
Now right-click on the iTunesSetup.exe (or iTunes64Setup.exe) that you downloaded and select "Run as administrator".
Does that go through any better for you? -
Every time I try to install itunes on my PC I get the following message, and I can't seem to find a solution. Any help out there?? "There is a problem with this Windows Installer package. A program required for this install to complete could not be run."
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Every time I try to install Itunes I get an error message saying it is unable to start services and to verify that I have sufficient privileges. I am the administrator. I have tried everything I can think of. When I click the ingore option it doesn't install corectly and I get a message saying MSVCR80.dll file is missing.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Ora-07445 reported in the alert log file
Hi all, We are using the following platform:- OS: Solaris Operating System (SPARC 32-bit) Oracle Server - Enterprise Edition / Product Version: 9.2.0.5.0 We encountered the following problem:- There is Ora-07445 reported in the alert log file. "ORA-0
-
Adapter-Specific Attributes Retrieval
Hello, I am trying to retrieve the filename from the sender message type to be used in the mapping. In order to achieve this I ticked the Adapter-Specific message properties on both Sender and receiver CC. I created a user-defined function FilenameY
-
I've edited an image on Lightroom and gone back and edited again. Is there anyway to get back to that original edit of the image?
-
Active Directory Integrated DNS Zones, replicate only to specific domain controllers
I have a customer with a fairly large Active Directory forest with many domains that they are trying to consolidate into a single domain which likely take 18 to 24 months according to their timeline. During this time, they would like all DNS zones t
-
How to limit the number of forum posts showing?
I use {tag_postlist,date} and I would like to limit the number of posts per page.