The Cluster not failover when i shutdown one managed server?

Hello, I created one cluster whit two managed servers, and deployed an application across the cluster, but the weblogic server gave me two url and two different port for access to this application.
http://server1:7003/App_name
http://server1:7005/App_name
When I shutdown immediate one managed server i lost the connection whit the application from this managed server, My question is, the failover and de load balancer not work, why??
Why two diferent address?
thank any help

Well you have two different addresses (URL) because those are two physical managed servers. By creating a cluster you are not automatically going to have a virtual address (URL) that will load balance requests for that application between those two managed servers.
If you want one URL to access this application, you will have to have some kind of web server in front of your WebLogic. You can install and configure Oracle HTTP Server to route requests to WebLogic cluster. Refer this:
http://download.oracle.com/docs/cd/E12839_01/web.1111/e10144/intro_ohs.htm#i1008837
And this for details on how to configure mod_wl_ohs to route requests from OHS to WLS:
http://download.oracle.com/docs/cd/E12839_01/web.1111/e10144/under_mods.htm#BABGCGHJ
Hope this helps.
Thanks
Shail

Similar Messages

How come I get the message (Not Charging) when I am plugged up to power?

How come I get the message (Not Charging) when I am plugged up to power? I keep getting this message, is there a problem? Or is this normal

It had got done to 30% when I plugged it up, it goes in and out - charging and not charging. it is sitting still, but I am creating Movies with iMovie and iDVD

The 'Do Not Email' when sharing a Document does not always allow a check mark to be entered.

The 'Do Not Email' when sharing a Document does not always allow a check mark to be entered.
Just wanted to report this. I have not checked to see if it has been previously submitted. The issue
is intermittent.

I think this happens because you need to send e-mail when you do the first contact with the user. Tellimg him who you are and etc.
When you already "know" that user, u can check the box.
Hope it helps,
Andrey Farias

Why does the alarm not work when the iphone 4 is turned off

why does the alarm not work when the iphone 4 for is turned off works fine when on most other phones work when off

The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

Why does the mail not work when i updated my 5s to iOs 8?

why does the mail not work when i updated my 5s to iOs 8?

Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

[SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

Hi there!
I have a problem which makes me very angry already :)
I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
LOGS on the second nodes:
Application Log
"Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
Failover Clustering Diagnostic Log
"[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
CMDLET Error:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:06:21
MSC-CO-EXC-02V
Failed
Error:
A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
(MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
This operation returned because the timeout period expired
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
Warning:
Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
Warning:
The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
Elapsed Time: 00:06:21
UPD:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.
Please, help me if you can.

Hi, Jared! Thank you for the reply.
Of course I did it already :) I have new info:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.

Health Service Heartbeat Failure Alert for Generated when one Management Server Down,

Hi,
I have Two Management Server, every one manage about 100 server, when one Management Server goes down unexpected, I receive 100 Alert for 100 Server Health Service Heartbeat Failure.
My Question, why when the Management Server down, it send that all Managed agent Health Service Heartbeat Failure?
Is there a way to change this?

SCOM 2012 agent will autofailover when primary server is down. You can check the failover management server by using the following powershell cmdlet:
#Verify Failover for Agents reporting to MS1
$Agents = Get-SCOMAgent | where {$_.PrimaryManagementServerName -eq 'MS1.DOMAIN.COM'}
$Agents | sort | foreach {
Write-Host "";
"Agent :: " + $_.Name;
"--Primary MS :: " + ($_.GetPrimaryManagementServer()).ComputerName;
$failoverServers = $_.getFailoverManagementServers();
foreach ($managementServer in $failoverServers) {
"--Failover MS :: " + ($managementServer.ComputerName);
Write-Host "";
http://www.systemcentercentral.com/how-does-the-failover-process-work-in-opsmgr-2012-scom-sysctr/

I am getting the error "Unable to connect to data warehouse management server" when I try to register it DWMS

I have a Data Warehouse Server that appears to be functioning but is running System Center Service Manager 2010 (w/ out SP1), Also have a functioning Configuration Management Server with Reporting Services Point installed the is running System Center
2012. Both systems are VM's running Windows Server 2008 R2 Enterprise w/ SP1 fully patched. Both systems are running SQL Server 2008 R2 as well. When I try to register the Data Warehouse Server via the GUI using the console or in Powershell it errors
out. Particularly on the GUI with the error "Unable to connect to data warehouse management server". I can browse to it, ping it, get the configuration management reports to run and show my AD assets, etc... but it will not register the DWS. I have
tried every suggestion TechNet has to offer and I am hitting a wall. Can someone please, please, please help!?!

unplug modem and router and reboot.
check setting for network, verify password.
sign in. Enter computer information.
let me know if this works.

Error 1316 when install Business One Integration Server

Hi, i have a problem when i try to install SAP integration Server. i already uninstall the previous version, and when i try to install it again, there is an error message "Error 1316. A network error occurred while attempting to read from the file C:\Windows\Installer\SAP Business One Integration Server.msi"
is there anybody can help me?

Hello Ferly! Welcome to the forums.
You can check out this site right [here|http://www.error1316.com/]. It could also be that you aren't the domain administrator as well. Try running it as an Administrator and see if that works before you try anything on the link that I gave you.

How does the ADF support romote call method between two managed server ?

How does the ADF support romote call method between two managed server ?

You would usually use this as a WebService through the WSDL that is exposed.
JDeveloper can help you create a Java Proxy to call the Web service if you point it to the WSDL file that was generated for your AM.
Some other samples here:
http://www.connotea.org/user/jdeveloper/tag/Service%20Interface

I am getting a message Internal Error Instacast keys not defined when I open one of the local tv news apps on my iPad. What do I need to do to fix it?

I am getting an error message "Internal error Instacast Keys not defined" when I open a news app from one of my local tv stations. What is causing this?

Hello, MommaLloyd24.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

How do I enlarge the "presenter notes" window when running my presentation on an external display?

In the latest version of Keynote, the "Presenter Notes" window is a small horizontal field at the bottom of the presenter's computer screen. Only 3-4 lines of text can be seen. This means that when you have a few paragrahs of notes, you have to scroll through them as you are presenting. This is very cumbersome. In the previous version of Keynote you could change the relative size of the slides versus the "presenter's notes" boxes when running a presentation on an external display, but in the new version, I can't find a way of enlarging the "presenter's notes" field.
Also, in the new version, the preview slide doesn't show the initial text on the next slide if that text emerges as a "dissolve in" build when you advance forward through your slides. I always have the initial text on my slides automatically "dissolve in" after each slide transtion. But in the new version of Keynote, when in presenter mode, I can't see any of the text on the "next slide." This makes it difficult to anticipate what slide comes next . . . without going to the Navigator. Does any one have a solution for this?
Thank you.

I figured it out with the help of a post from a few days ago. Although posted for a different problem, I followed these steps from Cornelia-I and it worked like a charm:
You can change the link of LR to the images from the network drive to your local drive, best done on parent folder level: right-click the highest folder in library left panel, and choose update storage location. In the opening dialog window point it to your internal folder.

HT4859 I have my iPhone and iPad backed up to iCloud. Recently, I had my iPhone stolen. I am trying to see the iPhone Notes but when I go to iCloud, I can only see my iPad Notes. How can I see the iPhone Notes?

I have been backing up my iPhone and iPad through the iCloud.
Recently my iPhone 4 was stolen but had recently been backed up. I am trying to find the Notes on that iPhone through the icloud.com.
When I go onto icloud.com, I can only see the iPad Notes - not the iPhone Notes.
Can anyone help?
Thanks,
G

Were both devices sync'ing their notes to iCloud? Or was one set to sync, and the other just to backup?
If you look in settings -> iCloud you needed to have the slider by Notes "ON" for both devices if you wanted to sync notes between both of them and iCloud. In that case, notes on each would be identical, and the same as you can view in the Notes app on www.iCloud.com
If you had the Notes slider "OFF" and the iCloud Backup option "ON" then your notes should be in your backup and restoreable, but you will not see them online in the Notes app there.

SET/GET not working when I submit one program into Main program.

Hi All,
I am using set/get parameter as follows but somewht it is not working.. Please help.
IF ( uf_instn = 'ACEFR' and uf_messg <> 'BSP' ).
    set parameter id 'AJN' field lf_jobname.
    set parameter id 'AJC' field gf_jobcount.
ENDIF.
SUBMIT   zace_interface
    USER   sy-uname
    VIA    JOB lf_jobname
    NUMBER gf_jobcount
    WITH   SELECTION-TABLE lt_seltab
TO     SAP-SPOOL
    AND    RETURN.
in the zace_interface program I have another submit program
    submit zrsbdcsub and return
                    user 'ZACE_INTERFACE'
                    with mappe eq lf_group
                    with von eq sy-datum
                    with bis eq sy-datum
                    with fehler eq space
                    with logall eq co_true.
ad inside this submit im using
              get parameter id 'AJN' field v_jobname.
              get parameter id 'AJC' field v_jobcount.
but i am not able to get the values into v_jobname & v_jobcount.
Can you please help me in this regard. how i will get the values in v_jobname & v_jobcount.
Thanking you in advance
Regards,
Prashant

Hi..,
any way u r executing the programs in the same session but between diff. internal sessions u can use the IMPORT and EXPORT options ( ABAP MEMORY )
or do one thing...
<b>In the first program Copy these fields into a file in the <b>application server</b>,, and in the Second submit program u retrieve these variable values from the Application server file into these two variables!!</b>
just now i have solved one of the issues of this Kind by using an Application server file.
In the first program..
IF ( uf_instn = 'ACEFR' and uf_messg <> 'BSP' ).
OPEN dataset 'FILE' for output in text mode encoding default.
transfer lf_jobname to 'FILE'.
transfer gf_jobcount to 'FILE'.
CLOSE dataset 'FILE'.
ENDIF.
and instead of using the GET parameters in the second program ..
OPEN dataset 'FILE' for input in text mode encoding default.
read dataset 'FILE' into v_jobname.
read dataset 'FILE' into v_jobcount.
CLOSE dataset 'FILE'.
This has solved my problem !!!!! hope this helps u also!!
regards,
sai ramesh

The Cluster not failover when i shutdown one managed server?

Similar Messages

Maybe you are looking for