The column name "MATNR" is unclear .
HI
when i execute the program , system show the error 'The column name "MATNR" is unclear .'
how to clear this .pls revert me
the program is
*& Report YTEST7
REPORT YTEST10.
TABLES : MARC.
PARAMETER: P_PLANT LIKE MARC-WERKS,
P_STORE LIKE MARD-LGORT.
SELECT-OPTIONS S_MATL FOR MARC-MATNR.
DATA : BEGIN OF IT-REORDER OCCURS 0,
MATNR LIKE MARC-MATNR,
DISPO LIKE MARC-DISPO,
MINBE LIKE MARC-MINBE,
WERKS LIKE MARC-WERKS,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
INSME LIKE MARD-INSME,
END OF IT-REORDER.
START-OF-SELECTION.
SELECT MATNR DISPO MINBE WERKS LGORT LABST INSME
INTO CORRESPONDING FIELDS OF IT-REORDER
FROM MARC JOIN MARD
ON MARC~MATNR = MARD~MATNR
WHERE WERKS IN P_PLANT
AND LGORT IN P_STORE
AND MATNR IN S_MATL.
FORMAT COLOR COL_positive INTENSIFIED.
WRITE :/ ' PLANT', IT-REORDER-WERKS CENTERED.
WRITE :/ ' MRP CONTROLLER', IT-REORDER-DISPO CENTERED.
write :/0(48) sy-uline.
Write :/0'|', 4(8) 'MATERIAL' CENTERED,16 '|', 20(8) 'REORDER' CENTERED,32 '|',36(8)'STOCK' CENTERED,48 '|'.
write :/0(48) sy-uline.
LOOP AT IT-REORDER.
FORMAT COLOR COL_group intensified off .
WRITE :/0'|', 4(8) IT-REORDER-MATNR CENTERED intensified on.
WRITE :16 '|', 20(8) IT-REORDER-MINBE CENTERED.
WRITE :32 '|',36(8) IT-REORDER-LABST CENTERED,48 '|'.
WRITE :/0(48) sy-uline.
ENDLOOP.
Hi,
Check your modified program.
REPORT ytest10.
TABLES : marc.
PARAMETER: p_plant LIKE marc-werks,
p_store LIKE mard-lgort.
SELECT-OPTIONS s_matl FOR marc-matnr.
DATA : BEGIN OF it-reorder OCCURS 0,
matnr LIKE marc-matnr,
dispo LIKE marc-dispo,
minbe LIKE marc-minbe,
werks LIKE marc-werks,
lgort LIKE mard-lgort,
labst LIKE mard-labst,
insme LIKE mard-insme,
END OF it-reorder.
START-OF-SELECTION.
SELECT marc~matnr dispo minbe marc~werks lgort labst insme
INTO CORRESPONDING FIELDS OF TABLE it-reorder
FROM marc JOIN mard
ON marc~matnr = mard~matnr
WHERE marc~werks = p_plant " Not IN P_PLANT
AND lgort = p_store " not IN P_STORE
AND marc~matnr IN s_matl.
"Note : IN operator is used only for SELECT-OPTIONS
FORMAT COLOR COL_POSITIVE INTENSIFIED.
WRITE :/ ' PLANT', it-reorder-werks CENTERED.
WRITE :/ ' MRP CONTROLLER', it-reorder-dispo CENTERED.
WRITE :/0(48) sy-uline.
WRITE :/0'|', 4(8) 'MATERIAL' CENTERED,16 '|', 20(8) 'REORDER' CENTERED,32 '|',36(8)'STOCK' CENTERED,48 '|'.
WRITE :/0(48) sy-uline.
LOOP AT it-reorder.
FORMAT COLOR COL_GROUP INTENSIFIED OFF .
WRITE :/0'|', 4(8) it-reorder-matnr CENTERED INTENSIFIED ON.
WRITE :16 '|', 20(8) it-reorder-minbe CENTERED.
WRITE :32 '|',36(8) it-reorder-labst CENTERED,48 '|'.
WRITE :/0(48) sy-uline.
ENDLOOP.
Thanks
Venkat.O
Similar Messages
-
How To Know The Column Name Of The Internal Table
HI ,
i have an internal table .
f1 f2 f 3 f4 f5
matnr mbrsh mtart meins minbe
i want to know the column name which depending on the value i.e . if it is matnr then f1 , if mbrsh it is f2 ..so on
Thanks.Hi ,
thanks for your replies . i am elaborating my query .
I have an internal table with 80 fields i.e.f1,f2,f3......f80 . In the first index i will be having the fieldnames
i.e.matnr , mbrsh , meins , mtart ..... . From second index onwards i will be having the corresponding data for the field name. i need to display a particular field in a table control . Here i will be knowing the fieldname. If i can get to know the column name i.e whether f1 or f2 or ... .i Can populate the data into the table control.
Wht i have done is taken a field symbol and used the following code.
read table i_upload index 1 assigning <lv_upload>.
here i will get the initial first record i.e
F1 MATNR
F2 MBRSH
F3 MTART
F4 WERKS
F5 LGORT
F6 VKORG
F7 VTWEG
F8 MAKTX
F9 MEINS
F10 MATKL
F11 BISMT
F12 BRGEW
F13 GEWEI
F14 NTGEW
F15 GROES
F16 KLART
F17 CLASS
F18 SPART
F19 VRKME
F20 UMREN
now i want to the field name .
Hope it is clear this time .
Thanks. -
When double clicking on alv ,want to get the column name
Hello there,
I'm displaying the value of internal table in an alv using Reuse_alv_grid_display method ,using fieldcatalog.I want to know the column name when double clicking on a particular line .If the the fieldname is 'MATNR' then i want to check that column name.
If anybody have any idea plz terply me.
Thanking you neonfor that you have to use the USER_COMMAND event.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = it_fcat
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM USER_COMMAND using ucomm type sy-ucomm
selfield type slis_selfield.
data: fieldname(30).
case ucomm.
when '&IC1'.
case selfield-fieldname.
when 'MATNR'.
message 'clicked on Matnr' type 'I'.
when 'POSNR'.
endcase.
endcase.
ENDFORM. -
Oracle 10g - Defining the column name in Non English
Hi Experts,
I have an exisitng application which is developed on Windows using ASP Technology and uses Oracle 10g 10.1.0.2.0.
The application is supported with an instance of Data Base within which multiple tablespaces are created for different clients. The application is developed in such a way that some of the tables arecreated dynamically and the columns are named using the data entered through the UI.
This application needs to be globalized now. The problem is, the column name entered through the UI can be in any language based on the client's settings and those values in turn will be used for naming the columns in the tables.
1) Can I have the column names to be named using non english characters in Oracle 10g DB? If so,
1.1) what should I do to configure the exisiting Oracle instance to support it?
1.2) To what level is that configuration possible, is it per DB instance level (or) can it be done at Tablespace level. I would like to configure each tablespace to host tables with columns defined with different languages, say for example, tablespace 1 will have tables with Japaenese column names and tablespace 2 will have tables with German column names?
2) What should I do to make my entire DB to support unicode data i.e., to accept any language strings. Currently all strings are declared as VarChar2, should I change all VarChar2 to NVarChar2 (or) is there a way to retain the VarChar2 as is and make some database wide setting?
Please note that I do not have an option of retaining the column in English as per the Business Requirement.
Envionment:
OS - Windows 2003 32 bit
Oracle 10g 10.1.0.2.0
UI forms in ASP
TIA,
Prem1. Yes, you can.
SQL> create table ÜÝÞ( ßàá number(10));
Table created.
SQL> insert into ÜÝÞ values (10);
1 row created.1.1 and 1.2 and 2. You can choose UTF as your default character set. It allows the user of non-English characters in VARCHAR columns in your whole database. It is not per tablespace.
SQL> create table ÜÝÞ( ßàá varchar2(100));
Table created.
SQL> insert into ÜÝÞ values ('âãäçìé');
1 row created. -
Need help on getting the column names of Tabletype
I have a table Mapping with the following values: This Mapping table contains the table names (in Tabname) and the column names(colname) of various tables and values(ValuesTobeFilled) for the columns.
I have to insert into the tables present in the Tabname field with the values present in the ValuesTobeFilled in the columns present in the Colname field.
Note: The Mapping table need not contain all the columns of the base table. The columns that are not present can be filled with null. And this mapping table is not fixed i.e. rows can be inserted/deleted frequently.
Sample values in mapping table:
Tabname Colname ValuesTobeFilled
sample_items Eno Corresponding Expression to get the values from XML input
sample_items Ename Corresponding Expression to get the values from XML input
XXX YYY Corresponding Expression to get the values from XML input
Before filling in the actual tables, I have to store the entire data temporarily and I have used a tabletype declared as follows:
TYPE T_sample_items IS TABLE OF sample_items%ROWTYPE INDEX BY BINARY_INTEGER;
l_sample_items T_sample_items;
Where the table sample_items have the following columns:
• Eno
• Ename
• Eaddress
• Eemail
So, the tabletype should be filled as:
Eno Ename Eaddress EEmail
1 XXX - -
I have declared a cursor to select the values from mapping table and I need to fill in the ValuesTobeFilled values to the corresponding table.
CURSOR c_xpath (c_tname mapping.TABNAME%type)
IS
select * from mapping where tabname = c_tname;
CURSOR c_tables
IS
SELECT DISTINCT TABNAME FROM mapping;
FOR crsr IN c_tables
LOOP
p_tname := CRSR.TABNAME;
FOR csr IN c_xpath(p_tname)
LOOP
IF l_xml_doc.EXISTSNODE(CSR.XPATH_EXP) = 1
THEN
l_node_value := l_xml_doc.extract(CSR.XPATH_EXP).getStringVal(); -- This is the value to be stored in the corresponding column
ELSE
l_node_value := NULL;
END IF;
IF CSR.COLUMN_NAME = ‘eno’
THEN
l_sample_items(1).eno := l_node_value;
ELSIF CSR.COLUMN_NAME = ‘ename’
THEN
l_sample_items(1).name := l_node_value;
END IF;
END LOOP;
END LOOP;
And I need to eliminate hard coding while comparing the column names (in the following piece of code) as the Mapping table values are subject to insertion/deletion:
IF CSR.COLUMN_NAME = ‘eno’
THEN
l_sample_items(1).eno := l_node_value;
ELSIF CSR.COLUMN_NAME = ‘ename’
THEN
l_sample_items(1).ename := l_node_value;
END IF;
I need to insert the values directly into the tabletype without this hardcoding. Please suggest me ways to compare the mapping table values with the field (column) names of the tabletype. If it is not possible using tabletype, please suggest any other ways of fixing the problem.
Many thanks,
GopiI take it this isn't going to be a serious production system at the end of the day?
Storing metadata in tables for extraction and insertion of data is just wrong in so many ways. It smells heavily of Entity Attribute Value modelling, which is the most wrong way to use a relational database and is known to have major performance implications and be liable to bugs and issues. The idea that EAV modelling allows for 'generic' databases where new data items can be added flexibly later on without having to change code is usually justified with an excuse of "it means we don't have to update all our tables when we want a new column" which is easily countered with "if you're adding a single column a good relational design wouldn't require you to add it to more than one table anyway in most cases".
Just what exactly are you trying to do and why? There has to be a better way. -
How to use the column names generated from Dynamic SQL
Hi,
I have a problem with Dynamic SQL.
I have written an SQL which will dynamically generate the Select statement with from and where clause in it.
But that select statement when executed will get me hundreds of rows and i want to insert each row separately into one more table.
For that i have used a ref cursor to open and insert the table.
In the select list the column names will also be as follows: COLUMN1, COLUMN2, COLUMN3,....COLUMNn
Please find below the sample code:
TYPE ref_csr IS REF CURSOR;
insert_csr ref_csr;
v_select VARCHAR2 (4000) := NULL;
v_table VARCHAR2 (4000) := NULL;
v_where VARCHAR2 (4000) := NULL;
v_ins_tab VARCHAR2 (4000) := NULL;
v_insert VARCHAR2 (4000) := NULL;
v_ins_query VARCHAR2 (4000) := NULL;
OPEN insert_csr FOR CASE
WHEN v_where IS NOT NULL
THEN 'SELECT '
|| v_select
|| ' FROM '
|| v_table
|| v_where
|| ';'
ELSE 'SELECT ' || v_select || ' FROM ' || v_table || ';'
END;
LOOP
v_ins_query :=
'INSERT INTO '
|| v_ins_tab
|| '('
|| v_insert
|| ') VALUES ('
|| How to fetch the column names here
|| ');';
EXECUTE IMMEDIATE v_ins_query;
END LOOP;
Please help me out with the above problem.
Edited by: kumar0828 on Feb 7, 2013 10:40 PM
Edited by: kumar0828 on Feb 7, 2013 10:42 PM>
I Built the statement as required but i need the column list because the first column value of each row should be inserted into one more table.
So i was asking how to fetch the column list in a ref cursor so that value can be inserted in one more table.
>
Then add a RETURNING INTO clause to the query to have Oracle return the first column values into a collection.
See the PL/SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/returninginto_clause.htm#sthref2307 -
How to display the column names of a table in the output
Hi,
I want to display the name of the columns of the table without using literals in a abap report.
EX: Consider the table KNA1
KUNNR NAME ADDRESS
I want to display the column names in the above fashion without using hardcoded write statements.
Thanking in anticipationYou can use this FM <b>DDIF_FIELDINFO_GET</b> It gives you all the names related to fields in a table -:)
Greetings,
Blag. -
Need to know the column names in my dynamic select clause
Dear All,
Please go through the following code. While executing the following code i am getting an error saying that dbms_sql.describe_columns overflow, col_name_len=35. Use describe_columns2.
Please guide me how to proceed further. Or please help me, how can i get the column names when i issue a dynamic select clause.
DECLARE
CUR INTEGER;
COL_CNT INTEGER ;
A INTEGER;
SEL_CLAUSE VARCHAR2(2000);
DESC_T DBMS_SQL.DESC_TAB;
REC DBMS_SQL.DESC_REC;
b number;
BEGIN
SEL_CLAUSE := 'SELECT 1,2,DECODE(1,1,''ONE'',2,''TWO'',3,''THREE'') FROM DUAL';
--'SELECT ROWID,PARA_SUB_CODE,DECODE('||''''||'ENG'||''''||','||''''||'ENG'||''''||',PARA_NAME,PARA_BL_NAME),NULL,NULL FROM PCOM_APP_PARAMETER';
--'SELECT 1,2,DECODE(1,1,''ONE'',2,''TWO'') FROM DUAL';
DBMS_OUTPUT.PUT_LINE( SEL_CLAUSE );
CUR := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(CUR,SEL_CLAUSE,DBMS_SQL.NATIVE);
DBMS_SQL.DESCRIBE_COLUMNS(CUR,COL_CNT,DESC_T);
B := desc_t.first;
FOR J IN 1..COL_CNT
LOOP
DBMS_OUTPUT.PUT_LINE('J := '||J || ' COL CNT ' || COL_CNT);
END LOOP;
BEGIN
A := DBMS_SQL.EXECUTE(CUR);
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
END;
Regards,
BalajiIs there any way can i have it directly??It does not work with static SQL either. Dynamic SQL is no different.
SQL> select 1 x from dual where x = 1 ;
select 1 x from dual where x = 1
ERROR at line 1:
ORA-00904: "X": invalid identifier
SQL>As suggested already, you will need to use alias if you want your select expression to be referred in the where clause.
SQL> BEGIN
2 FOR rec IN (SELECT *
3 FROM (SELECT 1,
4 2,
5 DECODE(1, 1, 'ONE', 2, 'TWO', 3, 'THREE') "DECODE(1, 1, 'ONE', 2, 'TWO', "
6 FROM DUAL)
7 WHERE "DECODE(1, 1, 'ONE', 2, 'TWO', " = 'ONE')
8 LOOP
9 NULL;
10 END LOOP;
11 END;
12 /
PL/SQL procedure successfully completed.
SQL>Message was edited by:
Kamal Kishore -
How to select even the column names of a table?
Hello All,
Is there a way to select even the column names of a table in the select statement?
My select from a table (say X) is in a SQL* Plus script that gets invoked by application tier and displays data in the application tier window. User's can then copy the data into a spreadsheet and do their processing. However, I need to give them the column names too along with the data.
Thanks,
ChiruIf there is a middle tier that is selecting and
displaying the data, and that's what the users are
copying from, the middle tier would have to address
its presentation of the data to allow users to
include column names. If this is a common task, the
application should probably be modified to give users
the option of downloading the data in a spreadsheet
directly rather than forcing them to copy and paste
data.Thanks for the reply.
The users don't have to copy paste. The application tier has an options in the "Tools" menu item which allows them to copy the entire output to a file (in my case a txt file which is a pipe delimited). Then they have to do text to columns to get the data into each column of the spreadsheet. I could have directly called the stored procedures from the application tier and created ".csv" files and FTP'd them to the user's folders. However, I am having to go this round about because, I am not getting enough support from the LAN team in FTP'ing etc.
OK I'll think of another workaround.
Thanks,
Chiru -
Hi,
I am using OCCI to interact with DB through code, which means I am writing a vc++ file to interact with Data Base and execute the Stored Procedure which I am calling from the C++ Code. And also displaying the output of the Stored Procedures to the Front End. I am succeeded in this, but now I should be able to display the Column names of the output to Front End. Can any one help me on this.
Example:
Sno | Sname
------- |-------------
1 ABC
2 DEF
I am getting (1,ABC) and (2,DEF) as the output of the Stored Procedure but I need the Column names also to display. How to get them.
Thanks in Advance..:)Look at Re: exporting csv via pl/sql - select statement?
It has an example how to extract the column name from a cursor. You have to check, whether you can use DBMS_SQL.DESCRIBE_COLUMNS
Your procedure might need another out parameter, that returns the column names , e.g. as comma separated list or as varray. -
How to read the column name of a table from sap system using C#?
Hi!!
I am using SAP .NET connector and creating a windows application.
Now I wanna read the column name when a table name is given....
Connection is done, but I don't know the code to read the column names alone...
Can anyone help me with the code??fine!!
So if i give the table name, which the RFC_READ_TABLE function module have, will it run properly? or i wanna change all the codes in order to support RFC_READ_TABLE function module?
Because from the beginning I was using BAPI_CUSTOMER_GETLIST function, but my client requirement is to use ERP function module RFC_READ_TABLE, he didn't give any table name also..
This is my code: What I have to change in this???
ECCDestinationConfig ECCDestination = new ECCDestinationConfig();
RfcDestinationManager.RegisterDestinationConfiguration(ECCDestination);
RfcDestination rfcDest = null;
rfcDest = RfcDestinationManager.GetDestination(a);
RfcRepository repo = rfcDest.Repository;
IRfcFunction customerList = repo.CreateFunction("BAPI_CUSTOMER_GETLIST");
IRfcTable addressData = customerList.GetTable("AddressTable"));
int j = addressData.Metadata.LineType.FieldCount;
for (int i = 0; i < j; i++)
RfcElementMetadata metadata = addressData.GetElementMetadata(i);
listallcolumn.Items.Add(metadata.Name);
Message was edited by: Jeswin Rebil -
How to rename the column name in oracle 8i?
hi,
Does anyone know how to rename the column name in oracle 8i?My method was drop the relationship key first then delete the old column,finally add the new column.
Thanks for your replay.
jingThere is no facilty to rename a column name in Oracle 8i. This is possible from Oracle 9.2 version onwards.
For you task one example given below.
Example:-
Already existed table is ITEMS
columns in ITEMS are ITID, ITEMNAME.
But instead of ITID I want ITEMID.
Solution:-
step 1 :- create table items_dup
as select itid itemid, itemname from items;
step 2 :- drop table items;
step 3 :- rename items_dup to items;
Result:-
ITEMS table contains columns ITEMID, ITEMNAME -
Set the column name of a table in a list box
is there any code to set the column name of a table in a list box at oracle devloper 6i?
pls help.I dont want to go for pl/sql . It should work any table.You want Dynamic SQL without using PL/SQL? Tricky. I'm sure there's a possible way using some very complex and convoluted XML functionality of SQL but in reality you are asking for something that isn't natural to SQL queries, especially if you are expecting a dynamic number of columns to be produced for each row of data. SQL expects a table structure, including output formats, to be a defined number of columns with any number of rows, not a defined number of rows with any number of columns.
Perhaps if you explain why you need this sort of functionality then we may be able to offer a better solution.
;) -
Changing the Column names / alias
Hi,
I have an oracle query and it works fine.
select q.sname,
SUM( decode(p.nprofile1,10,1,0)) as "0 - 5",
SUM( decode(p.nprofile1,9,1,0)) as "6 - 10",
SUM( decode(p.nprofile1,8,1,0)) as "11 - 15",
SUM( decode(p.nprofile1,7,1,0)) as "16 - 19",
SUM( decode(p.nprofile1,6,1,0)) as "20 - 20",
SUM( decode(p.nprofile1,5,1,0)) as "21 - 27",
SUM( decode(p.nprofile1,4,1,0)) as "28 - 30",
SUM( decode(p.nprofile1,3,1,0)) as "31 - 40",
SUM( decode(p.nprofile1,2,1,0)) as "41 - 45",
SUM( decode(p.nprofile1,1,1,0)) "46 - Over",
COUNT(q.sname) "TOTAL"
from task_core@cds t, cor_queue q, profile_core@crb p
where t.nmboxid = q.nmboxid
and p.ncodaid = t.nobjectid
and p.ntype=2
GROUP BY q.sname
ORDER BY q.sname
It generates a Cross-tab sort of result and I am using the decode function to generate the result.
My problem is that right now I am using hardcoded column names or alias for the columns generated by the decode function. eg. "0-5", "6-10" etc.
I have another table which contains these values ("0-5","6-10"). I would like to know instead of hard coding the column names like
SUM( decode(p.nprofile1,10,1,0)) as "0 - 5"
can we retrieve the values from the Other table that contains the values "0-5","6-10" etc and display it there in the decode function?
Pls help me with this issue
Thanks
Gilleshi,
the column names are always fixed. You can try dynamic sql in pl/sql or spool then execute, but in pure sql, it is not possible -
How to get the column names of the table into the Dashboard prompt
how to get the column names of the table into the Dashboard prompt
Thanks & Regards
Kishore PHey john,
My requirement is as follows
I have created a Rank for Total sales by Region wise i.e RANK(SUM(Dollars By Region)) in a pivot table.
My pivot table looks like this
COLUMN SELECTOR: TOTAL US , REGION , DISTRICT , MARKET
---------------------------------------------------- JAN 2009 FEB 2009 MAR 2009
RANK REGION DOLLARS DOLLARS DOLLARS DOLLARS
1 CENTRAL 10 20 30 40
2 SOUTHERN 10 30 30 70
3 EASTERN 20 20 20 60
4 WESTERN 10 20 30 40
When i select the District in column selector
Report has to display rank based on Total Sales by District. i.e
------------------------------------------------- JAN 2009 FEB 2009 MAR 2009
RANK DISTRICT DOLLARS DOLLARS DOLLARS DOLLARS
for this i need to change the fx of rank i.e RANK(SUM(Dollars By Region)) to RANK(SUM(Dollars By District)) and fx of Region i.e Markets.Region to Markets.District dynamically.
so , i need to capture column name of the value selected from the column selector and dynamically i need to update the fx 0f RANK & fx of region.
do you have any solution for this?
http://rapidshare.com/files/402337112/Presentation1.jpg.html
Thanks & Regards
Edited by: Kishore P on Jun 24, 2010 7:24 PM
Edited by: Kishore P on Jun 24, 2010 7:28 PM
Maybe you are looking for
-
I just renewed my subscription to convert a Word document to a pdf. Your sales department told me there was a hold up in confirming the purchase. I need to do the conversion now. In fact, if it had worked, I would be done now. [private information
-
Weblogic Integration Kit 3.5 with Service Pack 9
After installing VAJ35wls510sp9.jar, I got the following message when starting the WebLogic Server. Please advise.ThanksThe WebLogic Server did not start up properly.Exception raised: java.lang.NoClassDefFoundError: bea.jolt.pool.servlet.weblogic.Poo
-
Plugin Sony XDCAM lister et transférer FCP7
J'ai un montage vidéo à executer sur Final Cut 7 / Mac OS 10.6.8 Les images produites par Sony XDCAM juin et produisent des fichiers.MXF J'ai Installé le plugin XDCAM Lister et Transférer. Maïs rien n'apparait Dans La Fenêtre "Lister et Transférer. Q
-
App auto update not working? iOS 7
I have it turned on but apps are not auto updating. Also after updating I'm the App Store "updates section It lists all the apps that were updated. Anyone having any issues with the auto update feature? Anyone know about the update apps that were up
-
Extend the time for a title to show
how do you add time to a static title - say to hold it for 10 seconds in a movie