The file adapter takes also the mark of the beginning of the file as a char
Hi guys,
I need to use the file adapter for sending data into XI.
My first column of the CSV file contain ID of the objects of length 8 chars. But when the adapter takes also the beginning of the file, the length starts to be 9 chars.
How is it possible to disallow to take this mark?
I didn't find any parameter in the file adapter settings, which could solve this problem.
Thanx for answer! (Points guaranteed )
Peter
Hi Peter,
While configuring sender file adapter, you can do the following.
1. While defining Parameters for Recordset Structures , you can make use of the recordsetstrucure.beginSeparator function which will take the first string in the file as a begin seperator.
i guess this would help you.
regards,
Aravindh.
Similar Messages
-
I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?
You need to use the computer's install disks to repair the hard drive or install a new OS.
(58033) -
CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - The Mask panel is now placed next to the Look panel. WIth the masking and grading tools placed side-by-side, you can now work faster on the mask workflow." Is there a way to move, hide, or otherwise manipulate the panels for a custom layout? All the examples I can find on the Web show the Looks panel to the left of the Mask panel where the controls are available.
Ok, here is what I have so far. Appdelete the iWork and reinstalled. Pages and Number work, but not Keynote.
Now, I downloaded a couple apps that I need, and no matter what I did, the spinning ball came up and the download stopped till it unlocked itself. It is really frustrating because the download was not completed and whatever came through would not mount. Could this issue be the internet connection? Permission fix showed a lot of Airport issues. I will try to run permissions fix again. -
I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?
Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account, transfer the photos back to your new primary account etc.
-
File Adapter fixed length Native format Builder schema not reading the data as expected
Hi
We are using a File Adapter for reading a fixed length data. Using the schema we are able to read the file but the places are incorrect. Following is the schema that we used and the payload.
At the last you can find our expected read of data how it should be.
With out the record type code we are not even reading the file. Hope there should be a correction in the schema. Please suggest
Schema that we are using:
<?xml version= '1.0' encoding= 'UTF-8' ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
targetNamespace="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
elementFormDefault="qualified" attributeFormDefault="unqualified" nxsd:version="NXSD" nxsd:stream="chars"
nxsd:encoding="US-ASCII">
<xsd:element name="GENVNDRReturnedItem">
<xsd:complexType>
<xsd:sequence minOccurs="1" maxOccurs="unbounded" nxsd:choiceCondition="fixedLength" nxsd:length="1">
<xsd:element name="HeaderRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="PriorityCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="2" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateDstn" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateOrgin" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="FileCrDt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="FileCrTm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="4" nxsd:padStyle="tail"/>
<xsd:element name="FileIdMdfr" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="RecSize" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3"
nxsd:padStyle="tail"/>
<xsd:element name="BlockingFctr" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="2" nxsd:padStyle="tail"/>
<xsd:element name="FormatCd" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateDstnNm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="23" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateOrginNm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="23" nxsd:padStyle="tail"/>
<xsd:element name="RefCd" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"
nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="BatchHdrRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="5">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="ServClsCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyName" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="16" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyDiscretionaryData" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="20" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyIdfn" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="StdClsCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyEntryDesc" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyDescDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="EffEntryDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="SettlementDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="OrgntrStatusCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="OrgntrBatchCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="15" nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="FileControlRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}"
nxsd:startsWith="9">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="BatchCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="BlockCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="EntryAddendaCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="8" nxsd:padStyle="tail"/>
<xsd:element name="EntryHash" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="TtlDbtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="12" nxsd:padStyle="tail"/>
<xsd:element name="TtlCrdtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="12" nxsd:padStyle="tail"/>
<xsd:element name="Reserved" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="39" nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Sample data:
1011390714890 0910000191406110449A094101MCSCLDA_TESTIN
XPLLS KNRGO CNNK
5200MCSCLDA_TESTIN e-Bill
2390714890TELe-Bill
1406100001091000017000001
6262759774891010000074743
0000033793102651-013 U HOLBACH KARLA & JAMES 1091000013925011
799R01091000013925011
27597748
091000010000001
820000000200275977480000000337930000000000002390714890
091000010000001
9000060000025000001200995048661000001265867000000000000
Read File receive Activity:
<GENVNDRReturnedItem>
<HeaderRec>
<RecordTypeCode>0</RecordTypeCode>
<PriorityCode>11</PriorityCode>
<ImmediateDstn>390714890</ImmediateDstn>
<ImmediateOrgin>0910000191</ImmediateOrgin>
<FileCrDt>406110</FileCrDt>
<FileCrTm>449A</FileCrTm>
<FileIdMdfr>0</FileIdMdfr>
<RecSize>941</RecSize>
<BlockingFctr>01</BlockingFctr>
<FormatCd>M</FormatCd>
<ImmediateDstnNm>CSCLDA_TESTIN X</ImmediateDstnNm>
<ImmediateOrginNm>PLLS KNRGO CNNK</ImmediateOrginNm>
<RefCd></RefCd>
</HeaderRec>
<BatchHdrRec>
<RecordTypeCode>2</RecordTypeCode>
<ServClsCode>00M</ServClsCode>
<CmpnyName>CSCLDA_TESTIN e</CmpnyName>
<CmpnyDiscretionaryData>-Bill 2</CmpnyDiscretionaryData>
<CmpnyIdfn>390714890T</CmpnyIdfn>
<StdClsCode>ELe</StdClsCode>
<CmpnyEntryDesc>-Bill</CmpnyEntryDesc>
<CmpnyDescDate>1</CmpnyDescDate>
<EffEntryDate>406100</EffEntryDate>
<SettlementDate>001</SettlementDate>
<OrgntrStatusCode>0</OrgntrStatusCode>
<OrgntrBatchCode>91000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
<RecordTypeCode>0</RecordTypeCode>
<BatchCnt>000600</BatchCnt>
<BlockCnt>000250</BlockCnt>
<EntryAddendaCnt>00001200</EntryAddendaCnt>
<EntryHash>9950486610</EntryHash>
<TtlDbtEntryDlrAmt>000012658670</TtlDbtEntryDlrAmt>
<TtlCrdtEntryDlrAmt>00000000000</TtlCrdtEntryDlrAmt>
<Reserved></Reserved>
</FileControlRec>
</GENVNDRReturnedItem>
Expected Read data how we are looking:
<GENVNDRReturnedItem>
<HeaderRec>
<RecordTypeCode>0</RecordTypeCode>
<PriorityCode>11</PriorityCode>
<ImmediateDstn>39071489</ImmediateDstn>
<ImmediateOrgin>0091000019</ImmediateOrgin>
<FileCrDt>140611</FileCrDt>
<FileCrTm>0449</FileCrTm>
<FileIdMdfr>A</FileIdMdfr>
<RecSize>094</RecSize>
<BlockingFctr>10</BlockingFctr>
<FormatCd>1</FormatCd>
<ImmediateDstnNm>MCSCLDA_TESTIN</ImmediateDstnNm>
<ImmediateOrginNm>XPLLS KNRGO CNNK</ImmediateOrginNm>
<RefCd/>
</HeaderRec>
<BatchHdrRec>
<RecordTypeCode>2</RecordTypeCode>
<ServClsCode>200</ServClsCode>
<CmpnyName>MCSCLDA_TESTIN</CmpnyName>
<CmpnyDiscretionaryData>e-Bill</CmpnyDiscretionaryData>
<CmpnyIdfn>2390714890</CmpnyIdfn>
<StdClsCode>TEL</StdClsCode>
<CmpnyEntryDesc>e-Bill</CmpnyEntryDesc>
<CmpnyDescDate/>
<EffEntryDate>140610</EffEntryDate>
<SettlementDate>000</SettlementDate>
<OrgntrStatusCode>1</OrgntrStatusCode>
<OrgntrBatchCode>091000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
<RecordTypeCode>0</RecordTypeCode>
<BatchCnt>000060</BatchCnt>
<BlockCnt>000025</BlockCnt>
<EntryAddendaCnt>00000120</EntryAddendaCnt>
<EntryHash>0995048661</EntryHash>
<TtlDbtEntryDlrAmt>000001265867</TtlDbtEntryDlrAmt>
<TtlCrdtEntryDlrAmt>000000000000</TtlCrdtEntryDlrAmt>
<Reserved/>
</FileControlRec>
</GENVNDRReturnedItem>at step 8 of 9 of the file adapter wizard, the icon appears as a cog, on the right, with caption "define schema for native format".
I have JDev 11..1.1.3.0
The problem might be with the version of the SOA extensions you have installed.... -
What does a file folder with a question mark in it mean when the computer won't start?
What does a file folder with a question mark in it mean when the computer won't start?
There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
(68976) -
My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?
No one here can help you. If your phone is no longer under warranty, a third-party repair shop will most likely be your best bet. You can't mail the phone to Apple, in the US, as Apple does not accept international shipments. You could mail it to a friend/relative, in the US, & they could take it to an Apple store for you. Some Apple stores repair iPhones. Otherwise, you're looking at an out of warranty replacement.
Good luck. -
All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?
Hi
I haven't even touched anything that I know of?
And You've not moved or emptied any folder on Your Hard Disk named
• iMovie Event's - or -
• iMovie Project's
Or - disconnected any external hard disk/s
As one CAN NOT move the Event's or Project's on / via DeskTop/Finder - AS iMovie then loses the connection to them. Moving them - MUST BE DONE - within iMovie application - to work OK.
So if You by meaning or accident moved it/them - Move them back - and iMovie might work again.
ELSE - If You are 100% sure that You didn't move them then
• Trash iMovie Pref and Cache files
• Run Repair Permissions - Disk Util tool
• Run Repair Hard Disk - Disk Util tool - BUT YOU MUST Start-Up Your Mac from DVD or External HD to do this
and may be all will work OK again
Yours Bengt W -
HI , I, ON THE MONTH TO MONTH BILLING FOR Ps AND Lr ($9.99) ... i downloaded Ps but now want to download Lr ... how do i do that because it only gives me the option to take it on a month to month wit the $9.99 .... isn't it included with the package im currently on ??
Niel.v.d.h please utilize the steps listed in Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html to install Photoshop Lightroom through the Creative Cloud Desktop application.
-
Do the pictures i take on my iphone 4 get stored in the icloud automatically?
do the pictures i take on my iphone 4 get stored in the icloud automatically?
Not unless you set it to do so.
Photo Stream - iCloud -
File adapter Need to wait When Other Applicatio is writing the file
Hi All,
This is File to File Interface, iam using NFS here.
While other application is writing the file to the Folder, XI Sender File Adapter shld wait for certain time and then pick it up.
We have the Option " MSecs to Wait Before Modification Check" on File Sender Advanced TAB.
But it is no Use, it is not behaving correctly.
Please assist me on this
RegardsHey Vamsi,
I think you're good to go here. The behaviour is exactly as it should be. The polling interval takes priority when there is no file there but when there is a file there the modification check will take priority over polling interval so it will still wait the mandatory 2 minutes to ensure that no modification is taking place & that's exactly what you want. You don't want to pick up an incomplete file irrespective of when it was put there. So there will always be just over a 2 minute delay (or whatever you set the Msecs value to + a few seconds depending on where the polling cycle is when a file is written out but a max of 2 minutes & 19 seconds delay) when there is a file there but at least you'll have consistent data. If there is no file there the adapter will just poll every 20 seconds until a file arrives.
The 2 minute 'wait' step is exactly that. The adapter will see the file then wait 2 minutes & probably does a timestamp comparison or something. It doesn't do a modification check within those 2 minutes. Having said that, I don't see why you can't reduce the Msecs interval. My reasoning is that you basically want to establish whether it's still being wriiten out before you pick it up. Even if you set it to 5 seconds you should still be able to pickup whether the file is being modified (I'm assuming that the check is doing a timestamp comparison). That will significantly reduce your time wait period.
My assumption on the timestamp comparison was wrong It's actually does a comparison on file size when it reads the data in, see SAP Note (Point 3): [http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383231323637%7d]
Another suggestion made on the note: Get the writing application to write the file out with an extension different to the one you're polling for. Then, after they have completed writing out the file, they can do a re-name to the extension that you're polling for. That could also speed up things.
Regards, Trevor
Edited by: Trevor Naidoo on Oct 8, 2009 9:38 AM -
File Adapte picking up XML if XSD valid without verifing the XSD in adapter
hi',
I am facing one issue
I have a sample XML file which I want to read through BPEL process
for this I have configured the file adapter with the schema and reading the file adapter with the receive activity
next I have created one XSD file (which file adapter referes to) and one XML file,
File adapter reads it after the XML file gets validated with the XSD which is kept in a location *'/test/xsd/emp.xsd'*,
now the issue is that the file adapter is picking up and initiating the process without verifying the XSD mentioned in the adapter
it is only checking the XML file with the XSD mentioned in the XML,
for example if I have a xml file which is refering to some other schema it also gets read by file adapter without worring about what schema is mentioned in file adapter
please advice me is this the way File adapter works in Oracle BPEL or I am doing some thing wrong
I am using SOA suite 10.1.3.3.0 which is deployed in UNIX enviornment.
thanks
Yatanthanks Ketan ,
as you suggested, after adding validateXML to true, the XML is getting validated to the XSD in the adapter,
the process is getting invoked and the receive activity is throwing error of 'Invalid XML', this is perfect as I expected
however now the issue is, the file which is invalid in terms of XSD present in the file adapter is still being archived to 'success dir' i.e. 'LogicalArchiveDirectory', ideally it should have moved to fail directory,
but if the XML file is not complete or having some error in terms of the XSD it is refering to 'target namespace' and 'target location'
then it will move to the fail directory and the receive activity is also showing the error,
see this is how I have configured my bpel.xml file for the file adapter.
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="Read_Tph_ProdTrans_File">
<property name=*"prod_trans_success_file" type="LogicalArchiveDirectory"*>/aaa/bb/ccc/wis/tph/bpl_inbound/adjust/success</property>
<property name=*"prod_trans_incoming_file" type="LogicalDirectory"*>/aaa/bb/ccc/wis/tph/bpl_inbound/adjust/new</property>
<property name="portType">Read_ptt</property>
<property name="rejectedMessageHandlers">file:///aaa/bb/ccc/wis/tph/bpl_inbound/adjust/fail</property>
</activationAgent>
please advice how to bring this adapter to proper behaviour.
thanks
Yatan -
does my mac use the AC adapter as the power source when its plugged in and the battery is full? is it smart to enough to split?
The charging circuit charges until the battery reaches 100%, then shuts down the charging and goes to powering mode. When the battery charge trickles down to 93-95% the charging circuit starts again and tops up the battery. Will continue to operate like that if you leave it plugged in. Keeping it plugged in does not harm the battery or risk overcharging.
-
I'm upgrading to a new macbook pro mid 2012 with a Solid state drive from a macbook due 2 white that I have a 750 gb HD. My itunes is 95% of that Hard drive I just want to make sure I do not loss any of my itunes info in the move to the hard drive.
So, everything worked out just fine!
I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy!
Time info: For about 120 GB of material the codec change process took 25 hours.
Thanks for your help!
Best
*a -
Any help would be appreciated. Nothing obvous seems to work. Very frustrating.
I don't have a Recently Added playlist. However, I discovered that the file I had named Eating Healthy was given the name You Can Enjoy Eating Healthy when it copied to iTunes. I'm guessing iTunes pulled the full name of the piece from the internet. Upshot--the mp3 did transfer to iTunes on all 3 tries, but I was looking in my alphabetized list under E, not Y, so I didn't see it there. Thanks for your help.
Maybe you are looking for
-
Camera Z-Axis Movement Shutters
Hello, I've encountered this issue before and was hoping somebody could help me solve this most frustrating quirk. When I do a slow Z-Axis move with a camera, either pushing in or pulling out, near the end of the movement on the easy-ease, the image
-
Set security code in nokia c5 05
How can i set an security code in my nokia c5 05? I want my mobile to ask for an password when i press the lock button.
-
Authorization checks vs ST01 data
Experts. My 1st post. I Just tried to find on the forum about my issue and could not find anything. Question: How could ST01 shows that the user passed on the authorization check if he have authorization to a fixed value different? The user have VKOR
-
Spry Tabbed Panel Defaults to home page with recordset paging
I have Spry ver. 1.6.1. A Spry Tabbed Panel titled "Check Ride Activity Report" (Tab 6) accesses a mysql database and shows the records in a table format. Instead of having all the records display at once I want to limit the records displayed to a
-
Connecting to the Mobile Server Repository
Having finally installed Oracle Lite for 9i succesfully and adding the mobile repository to my current database with no issues. I've been following the configuration guide in the documentation and I am attempting a stand alone mode. However... when I