The hard drive on my MacBook crashed is there anyway to get my music and pictures off my iPhone?

The hard drive on my MacBook crashed is there anyway to get my music and pictures off my iPhone?

Do you have the computer working again? If so, sync the iPhone to the computer, and in iPhoto it should show up as a 'camera' and you can import the photos from there. You can also open iTunes and transfer the music from the iPhone to your iTunes library.

Similar Messages

  • HT2291 I installed Itunes on mu laptop.I down;oaded some music. The hard drive on that computer crashed. How do i get my Itunes library from the other computer to put on my new computer?

    How do i get my Itunes library from my crashed hard drive to put on my new computer? The old computer had Windows Vista and the new computer has Windows 8.

    It will only be where you put it.
    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.  Use your backup copy to put everything back.
    If for some reason you have failed to backup ( not good), then you can transfer itunes purchases from an ipod.  File>Transfer Purchases.

  • The hard drive for my MacBook Pro recently crashed.  I purchased and installed a new hard drive (i.e. Samsung SSD).  However, when I try to re-install the Mac's operating system, I come to the part of the installation instructions where you asked to selec

    The hard drive for my MacBook Pro recently crashed.  I purchased and installed a new hard drive (i.e. a Samsung SSD).  When I try to re-install the Mac operating system, I come to the part of the installation instructions where you are asked to choose a disk to install the software.  However, there is no disk listed in the selection screen.  Why is there no disk in the selection screen? 

    Welcome to Apple Support Communities
    You haven't formatted the SSD, so you can't install Mac OS X.
    First, close the OS X installer and open Disk Utility. Then, choose the SSD at the top of the sidebar, go to Erase tab, choose "Mac OS Extended (Journaled)" as "Format", and press Erase. Finally, close Disk Utility and reinstall OS X. See > http://pondini.org/OSX/DU1.html

  • I have very little space left on the hard drive on my macbook, on my storage report it says "other" is taking up more than two thirds of the space on the hardrive. How can I identify what these files are?

    I have very little space left on the hard drive on my macbook, on my storage report it says "other" is taking up more than two thirds of the space on the hardrive. How can I identify what these files are?

    Hello,
    There is free software you can download that gives you a graphical image of what files are used on your hard drive. http://www.derlien.com/
    This may help you clean down your hard drive for more space.
    Best of luck

  • Is it possible to change the hard drive in a macbook pro, if so where from? and how?

    is it possible to change the hard drive in a macbook pro, if so where from? and how?

    secondrow wrote:
    whats a green drive? thnks
    Green is a marketing term for a drive designed for lower power use, lower noise, and lower heat. The side effect is that it's not as fast. Black drives are designed for highest performance, so they might use more power and run hotter and noisier. I upgraded my Apple Time Capsule with a green drive, but I put a black drive in my Mac Pro.
    Kappy wrote:
    7200 RPM drives are faster than 5400 RPM drives.
    As in cars, RPM is not the sole determinant of performance. In some cases, a newer drive at a lower RPM is faster than an older drive at a higher RPM, when the newer drive uses better technology. I have heard that some of today's high-capacity 5400RPM drives are faster than 7200RPM drives of lower capacity simply because the very high density of a 1TB drive means more data passes under the head even at a lower RPM. Certainly there have been times in Apple's past when new lower RPM drives were faster than higher RPM drives of the previous generation, a notable example being when 4200RPM perpendicular recording drives were introduced and beat 5400RPM drives.
    Yes, generally RPM can be used to compare, but it is important to realize it isn't always true.

  • I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
    He has made a comprehensive list, browse through them and decide which  suits your requirements.
    Have a nice day!

  • The hard drive on my MacBook died and I had it replaced. I can't locate my website files and every time I try to open my idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name or password?

    The hard drive on my MacBook died and I had it replaced. Now I can't locate my website files and every time I try to open my finder/idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name or password? Any suggestions out there

    Arty ~ Welcome to the Support Communities. iWeb can't import/open published HTML/media files on your iDisk. iWeb can only open its key Domain file which contains your site data — it's usually located here:
    ...If you don't have a backup of your Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
    http://iwebfaq.org/site/iWeb_Backup_retrieve.html
    Also this thread may help:
    Hard Drive replacement causes new/unknown user password?

  • The hard drive on our laptop crashed was able to transfer all for 2 users files etc to another mac. got it fixed 80,000 photos were transferred back but iphoto library for 1 user is empty now. can this iphoto library be recovered?

    The hard drive on our laptop crashed and we took it to the apple store and they said we can transfer all files photos and videos over to another mac laptop via a special cable.  We did that and everything for the two users transferred over to the other laptop fine including 80,000 photos.  We got the laptop fixed and my husband transferred everything back to our laptop.  In his profile (he’s the administrator) his iPhoto library has all 7900 of his photos in it as well as all his events and albums that he created prior to it crashing. It’s organized exactly how he had it; however, in my profile, my iPhoto library is empty.  I had over 9,000 photos in it and like 65 events and a couple of albums and it’s completely empty yet when he transferred everything back to our mac, he it showed that 80,000 photos were transferred as well.  Do you know where all those photos could possibly be stored?

    Yes you can move the book but not by exporting
    The book is just entries in the iPhoto database so the only way to transfer it is ot transfer the entire library it is in - you can make a "mini" library containing only one book to make the transfer easier - see Old Toad's tutorial #9 - http://oldtoadstutorials.net/No._9.html
    You also can save a PDF of the book and transfer that but you can not edit pr process it
    LN

  • I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

    i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

    If you're able to boot, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all.

  • I just changed the hard drive on my macbook pro 13" and it won't turn on. I need to put the latest operating system on it.

    i just changed the hard drive on my macbook pro 13" and it won't turn on. I need to put the latest operating system on it. It had OS8 on it

    dtrewitt wrote:
    It had OS8 on it
    Ummmm no it didn't.  iOS only runs on iPhones, iPads and iPods.

  • Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

  • I formatted my ext hard drive and changed it to mac os x extended(journaled). then i put in all my data back. after a while, i insert the hard drive but my macbook cannot read it. plz help

    i formatted my ext hard drive and changed it to mac os x extended(journaled). then i put in all my data back. after a while, i insert the hard drive but my macbook cannot read it. plz help

    SanandaDutta 
    tried on a different mac. The same problem exists.
    If that is the case, its extremely unlikely you have a bad USB cable on the seagate, rather as I mentioned earlier a bad SATA bridge card.
    If the Seagate 1TB USB external wont open on either Mac and youve verified same (try a diff. USB cable if you have one however this is nearly never the case),....then to get the data off that HD (unless it is dead which is also extremely unlikely),......then you would need to extract the HD from its case and insert same into either a HD dock or USB HD enclosure.
    8 out of 10  seemingly dead inopperable 1-3+ year old external HD are perfectly fine, rather the cheap 50 cent SATA bridge card fries and dies (alas)
    reply back if you need help in extracting same. 

  • I've had trouble with my Macbook since the first month I bought it. I've replaced the hard drive 3 to 4 times. Now some programs won't work or shut off by itself. Is it possible to ask for a complete exchange of products?

    I've had trouble with my Macbook since the first month I bought it. I've replaced the hard drive 3 to 4 times. Now some programs won't work or shut off by itself. Is it possible to ask for a complete exchange of products?

    This may help you: http://store.apple.com/us/help/returns_refund
    It would appear that you can ask for an exchange but it doesn't specify any time frame... Hopefully someone more knowledgeable can add to this.
    By the way, if you've replaced the drive so many times, perhaps there's something else going on elsewhere.

  • DIY: Is it possible to replace the Hard Drive on a MacBook?!

    It seems it is permitted to replace the Hard Drive on a MacBook (13"). I found Apple "Hard Drive Replacement Instructions 073-1045 Rev A" dated 26 Jan 2007.
    OK this is very basic-- but my question is: When you get the Hard Drive and Install it-- can you boot from an external HD and then FORMAT THIS DRIVE? Where to PURCHASE the drive?
    Thanks as I prefer to do this as my data is backed-up and to wait 15 days to have Apple do this in Belgium... I need this Mac!
    Thanks for any comments.-- Again, key question is: WILL THE HD be unformatted or ??? and how to format. I have an external drive (several) or can boot from the DVD.
    THANKS!
    Steve

    You'll find a good tutorial here: http://eshop.macsales.com/tech_center/installation.cfm.
    Be sure to prep the new drive properly:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button and set the partition scheme to GUID, then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    Now you can clone your external drive to the new internal drive:
    How to Clone Using Restore Option of Disk Utility
    1. Select the internal volume from the left side list.
    2. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    3. Click on the Restore tab in the DU main window.
    4. Select the internal volume from the left side list and drag it to the Destination entry field.
    5. Select the external (startup) volume from the left side list and drag it to the Source entry field.
    6. Double-check you got it right, then click on the Restore button.
    For added precaution you can boot into safe mode before doing the clone.

  • The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

    The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

    You can store your iTunes library on a Time Capsule.  So that you can access on your local (home) network (I wouldn't recommend access via the internat), (off site.....to slow).  
    If you do decide to put your libray on Time Capsule I'd recommend doing this.
    Option 1:
    1.  Don't use TC as a Backup (Time Machine).
    2.  Connect a USB drive to your TC or Computer and backup to the  drive. Backup when a change is made to the library (adding Apps, Songs you get the idea). 
    Option 2:  (What Im doing)
    1.   Two Time Capsule's connected via ethernet cable (roaming mode, bridge).
    2.   Use TC1 as a Time Machine backup
    3.   Use TC2 as network drive.  (The information on TC2 does NOT get backed up to TC1).
    3a. Connect a USB, FW, drive to your desktop computer (if you have one) use SilverKeeper to schedule backups.       Silverkeeper will look at TC2 and back it up to a external or internal HD.  I've been doing the or some time now.  Or connect to your TC and do an archive.
    I have this setup because I don't trust Cloud base services and I want access to my files (in Sync) on TC where ever I am, as long as there's a internet connection.  It's expensive, but does exactly what I expect.
    The most important thing is to safe guard your data in case of a failure.
    In your situation it would probably be better to get a high speed SD or thumb drive, however I've never been successful in backing up those type of drives with TM.  What ever you decide to do make sure you have a GOOD duplicate (backup).

Maybe you are looking for

  • Urgent........need help in report

    hi all, i need help in a report. the requirement is , i need to create a report that will display the SO number in alv grid with check box. from the list, if i select the check box, it should •     Perform VA02, go to the item detail (Sales) (RECORDI

  • How do i initiate airplay on my macbook pro

    I have just purchased and set up Apple TV.  I have a Macbook Pro with the latest IOS.  How do I initiate Airplay? 

  • Query for Cost Code in oracle HRMS

    Hello Exports, i am new in oacle hrms, So Can you please tell how to fetch cost code in oracle hrms r12 ( i need sql query for cost code ) Thanks

  • Problem quering a range of numbers

    Hopefully someone can help. I have a query that I need to select results that are from the range -30 through any positive number up to 70. My problem is my query is looking at (for example) -95 as a number greater than -30 which is shouldn't.  Does a

  • How to determine User Device Affinity without SCCM!?

    Hard to know for sure. You can query the folder list at c:\users, and check the registry for the last logon dates of the various profiles. One would hope that the most recent logon(s) would be the primary user(s).