The iPod does not play any songs, always stuck on 0:00. All the browsing features work.

The iPod classic does not play any of the songs.  all the songs stop at 0:00 and don't play. How do I fix this?

Try the Hard Reset
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

Similar Messages

  • I am not able to restore my shuffle(2nd gen) . When ever I tryr, it says that the device contains files that are open in some other application. It does not play any song and the shuffle has 50 percent "other files."

    I tried downloading reset utilities but it keeps on saying it is for 32 bit(I have Windows 7). Please HELP

    The reset utility only works with Windows 2000 and Windows XP.
    As for the files in use by another application, try rebooting the PC and iPod Shuffle and attempt to restore it again. Also make sure the "Enable Disk Use option is NOT ticked from under the iPod's Summary tab in iTunes.
    See here for instructions on resetting the iPod Shuffle.
    Resetting iPod shuffle
    B-rock

  • Ipod does not load any songs from itunes and freezes alot!!!!

    I plug in my ipod and itunes opens and says that it is updating but nothing happens. I downloaded itunes 6 again, and then tries updating the ipod again and it said that it is updated. When i try to load music sometimes switching between disck mode an regular helps, but it isn't doing a thing now. I don't know what to do. PLS HELP!!!!

    yea i guess that could be possable. i guess with 16,000 songs and only 13 did not transfer to ipod i should be happy but this is mac not windows so i would like to think the soft ware would work without flaws.. as for all my dupes i put over 1500 cds in my itunes library. a lot of the cds were various artists etc. that is y i have so many dupes. my imac has a 500g hard drive so i have plenty of space left on my hard drive. i have 2 external hard drives where my music is backed up.i have a 1terrabit lacie that i just use for time machine and a 500g lacie to back up my music and other stuff. iwould never trust my music to be backed up on only 1 external hard drive. if it died my music would be gone forever. thats y i use 2 external hard drives

  • Hi, my itunes does not play any songs it just stays on 0:00 is there any way to fix this?

    I have tried uninstalling and then reinstalling but it does not seem to be working. Any help will be appreciated.

    There is no way to consolidate iTunes accounts.
    Setting up an iPhone has never required creation of a new Apple ID.
    You've apparently purchased content with both Apple ID's.  Sign into the device with the correct Apple ID and sync the content.

  • Ipod does not play music

    HELP!HELP!please someone
    heres the problem
    my ipod DOES NOT PLAY MY SONGS
    i have reset my ipod countless times
    i have restored it countless times
    can someone, anyone help me!!!!
    PLEASEEEE!!!!!

    sorry im just angry that my ipod is being dumb.
    okay for a long time now my ipod does not play my music. when i click on a song the track doesnt move it just stays 0:00 -3:35. so the songs show up on my ipod but they dont play. ive reset it, restored it and nothing works. i think its because i left in charging for a month strait, so maybe it over charged, cause it worked fine before that

  • When enabled, the flashing green light. And the player does not play music. Also no sound, no voice control...

    When enabled, the flashing green light. And the iPod  does not play music. Also no sound. But iTunes see my device, and i can synchronize it. Can you halp me?

    Have you tried resetting the Shuffle to see if that makes any difference?
    Resetting iPod shuffle
    Brock

  • BI Publisher Word Template The report does not contain any data fields.

    I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
    Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
    2. Oracle BI Publisher -> Open (I open the report)
    3. Go to Insert -> Table Wizard
    I get this error:
    The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
    Please help

    Hi
    How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
    Please clarify
    Thanks

  • Why do my songs and audio books keep getting erased when I add a new book?  Now some books will not play and the iPod does not keep track of where I was when I pause a book, leave for music and then go back!

    About a month ago I added some new audio books to my iPod Classic and then after disconnecting, I discovered EVERYTHING had been erased. 
    I had to restore through my iTunes but then I could not load my music back on.
    I uninstalled / reinstalled iTunes and completely reformated the iPod drive.
    I successfully got my music and books back on but then added a new book two days ago only to discover everything got erased AGAIN!!!
    Of course, my 1 Year Warranty was up about a week before the first incident.....
    I formatted the iPod again, uninstalled / reinstalled iTunes (it was freezing during sync) and downloaded all my music and books again.
    Now I have several books that will not play (they play on iTunes and they played on the iPod before all these events) and the iPod does not keep track of where I was in a book when I have to stop and go to something else.
    Does anyone know what is going on with this thing???  I have a 5th Gen Video and in all the years I've had it, I've NEVER had problems like this! 
    Does anyone have any ideas on what I can do to get my iPod Classic up and running properly again?
    Thanks.

    When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised  filesytem structure at the start of the Sync.
    The timeout failure could be due to
    Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
    Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
    Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
    Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
    Have a nice day!

  • IPod will not play any music. Seems like it is in "Pause" mode.  No sound from either the head phones or internal speaker.  I have 418 songs stored and none will play.

    iPod will not play any music. Seems like it is in “Pause” mode.  No sound from either the head phones or internal speaker.  I have 418 songs stored and none will play. I have tried resetting, turning on and off the iPod, etc. but to no avail.

    Try restoring from backup. Next would be a restore to factory defaults/new iPod.

  • 2Gen iPod Shuffle Does Not Play .m4a Songs

    My 2Gen iPod Shuffle 1GB only plays songs that I purchased from iTunes (.m4p) and will not play any songs that I ripped to iTunes (.m4a). According to iTunes, I successfully transferred 80 songs on to my Shuffle. Under the Settings tab, it shows that all the songs are loaded and I have plenty of capacity available. Under the Content tab, all my songs are listed. I have the latest software version and have reset twice with no success. My iPod Classic plays the songs fine. I appreciate any help or suggestions.

    Ian - thanks for your input. My bit rate was well under the limit. This is what I've found out so far. The songs that my iPod Shuffle do not play are the (.wma) songs I converted to (.m4a) using EasyWMA. The converted songs work fine on my MacBook iTunes and iPod Classic, but not the iPod Shuffle. I contacted EasyWMA and it was suggested that I convert the selected songs to either (.mp3) or AIFF. As an experiment, I converted some (.wma) songs to AIFF using EasyWMA and had iTunes convert the AIFF files to (.m4a). Interestingly - it worked. I have no idea why the Shuffle did not recognize the EasyWMA (.m4a) direct converted songs (especially since the iPod Classic and iTunes had not problem playing them) - but apparently the iTunes conversion does something that the Shuffle software requires. Still a mystery, but at least I now have a much wider assortment of music on my Shuffle than I started out with.
    Thanks again - George

  • Ipod Does not Play songs

    Ipod does not play music. Instead of playing the song, it just lists the title (like when a song is playing) and then moves to the next song without playing the song. It's as if it automatically forwards to the next song (song titles displays for every second). And this occurs in shuffle mode, and/or selecting a playlist. Need help! Ipod was purchased in this site on May 27,2006.
    Regards,
    Ariel
    Ipod Nano 2Gig 2nd generation   Windows XP   iPod Nano Serial Number: 5K6106HUTJT

    Hi! Did you get an answer for this as mine just started doing the same thing today! HELP! I don't want to wipe it and start again!!! And i can't find anything helpful!!!

  • I downloaded the new operating system and now the Bluetooth in the car does not play my music.  All the songs show the cloud with a red arrow pointing down. How do I download all of them again to my I phone please?

    I downloaded the new operating system and now the Bluetooth in the car does not play my music.  The music on the phone show the cloud and the red arrow pointing downwards.  How do I download all the music again to my phone please?

    I have an ITunes account.  I got it when I got my IPOD.  I've thought about upgrading, but I didn't see any reason to buy a newer IPOD because they all come with so much stuff I don't want/need.  I don't have my current IPOD filled yet and I really don't need an IPOD Touch that has capabilities that my Droid already has.  I don't need to be concerned with documents, mail, attaching to Facebook or playing games.  I can do all that on my phone.  I just want to maintain my music between 3 devices.
    So now that I see it is not to my benefit to have this product---can you point me in the direction to cancel this?  And how do I get my music back?  Will it show up once I cancel my account?

  • Have 60 gig ipod classic will power up will go to songs but will not play any songs just sits there on 0 I can fast foreword but it still will not do a thing just sits at new spot in song help please.

    Have 60 gig ipod classic will power up will go to songs but will not play any songs just sits there on 0 I can fast foreword but it still will not do a thing just sits at new spot in song and will not play , help please.

    Update!
    This is what I did to fix both the skipping songs problem and the iPod verifying forever & not able to restore problem (because of iTunes 9):
    a) I used Disk Utility to reformat my iPod while in Disk Mode using the instructions here:
    http://support.apple.com/kb/HT1363?viewlocale=en_US
    and here:
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml#backup
    b) Do not unplug your iPod after reformatting (mine showed up as a firewire disk) - simply launch iTunes ( I went back to 8.2) and follow the Restore instructions here:
    http://support.apple.com/kb/HT1339
    iPod is recognized, syncs and doesn't skip songs anymore after that miserable experience with iTunes 9!!!

  • My ipodmy ipod shuffle 4th gen does not play whole songs, only parts then goes on to next song

    My recently bought ipod shuffle 4th gen does not play whole songs synced to it, only the beginning then goes on to the next song.  What have I done wrong?

    I changed the iPod to Disk mode and it just blinks orange while it is connected to the PC. It says that it is synched on the PC screen but I thought the blinking orange light means that it isn't. I took it back out of disk mode. The original problem still exists...when I turn it on, the green light stays lit for 5 seconds then there's no light at all....when I press play the lights alternate orange and green indicating no music is loaded which is wrong since it shows all my songs that are loaded when it is connected to my PC. What a mess.

  • My disk drive does not play any original dvd or cd anymore, but the copies work fine, no matter which format. Do I need a new disk drive?

    Hello All,
    since last week my disk drive does not play any original DVD or CD anymore, but copied ones, no matter which format work fine. I am a bit confused that the copied ones still work.
    Anybody experienced the same? Will I have to get a new disk drive? Unfortunately the warranty expired last month
    Looking forward to your answers and thanks,
    Yvonne

    An external DVD drive from http://www.macsales.com/ may solve your problems.

Maybe you are looking for

  • Vendor Consignment Clearing

    Hello Experts, Can you plese explain/show me the process of clearing consignment related GR/IR up to accounting? As from what I'm thinking, before the documents can be cleared in transaction F.13, it must be first cleared on the MM side. Because docu

  • Redo log files are not applying to standby database

    Hi everyone!! I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow . My standby

  • VS.PHP vs PHP TOOLS for Visual Studio : which is the best ?

    Hi, I love Visual Studio. I use it since 2006 for c#, asp, WinForm project, etc. I have a question about PHP / Simple Web dev :  Which is the extention between VS.PHP and PHP TOOLS ? What i need : - Intellisence (auto completion all PHP core class an

  • Error when deploy a project in SQL Server Analysis Services

    Hi all, I tried deploy my project SSAS, but it send message error. This is image before deploy myproject, it is star chema of project. and this is the image when i try deploy it, error list. I want to complete my project. How i can fix error list???

  • Webcenter Spaces Error

    I am getting the following error when starting up webcenter spaces. weblogic.management.DeploymentException: [Deployer:149003]Unable to access application source information in 'C:\Oracle\Weblogic10.3.1-R1\user_projects\domains\MyWCDomain\servers\WLS