The job is experiencing a transient failure and processing may be delayed

Hi,
I get the following error (in the management services operation logs) every 10-15 minutes.
What does it mean?
Thanks.
"The job is experiencing a transient failure and processing may be delayed"
Correlation ID:
340f6e80-8559-4892-b61a-84bad23f947a
Message:
The job is experiencing a transient failure and processing may be delayed.
Message Time:
01/31/2015 19:56:07 UTC
Microsoft.Resources/EventNameV2:
controller
Microsoft.Resources/Operation:
Information
Microsoft.Resources/ResourceUri:
/subscriptions/b4104220-ea0c-4a63-b0c2-a3c80ba30e23/resourceGroups/StreamAnalytics-Default-West-Europe/providers/Microsoft.StreamAnalytics/streamingjobs/soiotbesajob
Janiv Ratson. Technology and Development Expert. | BL: http://blogs.microsoft.co.il/blogs/janiv/ | LI: http://www.linkedin.com/in/janiv | TW: http://twitter.com/janiv http://about.me/janiv

Hi Janiv,
Below is a query that I believe should work for you. This query will do a sum when Type is 10 and an average when Type is 11:
            SELECT
            deh.name as NAME,
            deh.type as EventType,
            SUM(value) as EventCount,
            COUNT(*) as Occurrences
            FROM input as deh
            WHERE deh.type = 11
            GROUP BY deh.type, deh.name, TumblingWindow(minute,5)
            UNION
            SELECT
            deh.name as NAME,
            deh.type as EventType,
            AVG(value) as EventCount,
            COUNT(*) as Occurrences
            FROM input as deh
            WHERE deh.type = 10
            GROUP BY deh.type, deh.name, TumblingWindow(minute,5)
Concerning Device_Id, currently, we do ask that the fields be consistent and explicitly provided for each and every event. We cannot look at a previous event and get a field value from there.
I hope this answers your question,
Thanks

Similar Messages

  • Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)

    Hi
    In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
    But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
    Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
    There is only one Job Server and the destinations are enabled in it
    There is no Job server for Crystal Reports Job Server
    Do i need to create it and how.

    Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.

  • Can I read out the Line-in connector of my PC and process datas in Labview??

    I would like to read an analog signal from the line-in connector. Furthermore I would like to process theses data. Are there any VI's or examples concerning this problem?

    In LabVIEW the Sound Input VIs will read from whatever device is configured for recording in Windows. If you have the line-in set as the recording device then the Sound Input functions will allow you to read in from line-in. There are some examples that do this that ship with LabVIEW titled:
    Sound Card AutoPower Spectrum.vi
    Sound Card Simple SpectrumAnalyzer.vi
    Hope this helps.
    Kevin R
    Applications Engineer
    National Instruments

  • How do we know that some of the jobs have been held up in the BW system.And

    How do we know that some of the jobs have been held up in the BW system.And after we know that some of the jobs have been held up, how do we restart it?Please provide me an answer.It is very important.I will assign points
    Regards,
    Poonam

    Hi,
    Tcode sm37 is the place where you can see the background job status.
    Jobs have been help up
    as per my understanding
    1) job has been triggered and kept it in hold
    Now when a job has been triggered, and is kept in hold for its associated process, then you have to wait, becuse the target on which the job has been run is currently used by other and because of this the present job is kept in hold.
    Also see the st22 for any shortdumps.
    2) Job itself has not yet triggered
    The jobs will be in released state and will not trigger, normally this occurs when that particular job is waiting for the event to trigger it, and probably the even has not yet triggered or even if triggered the communication mightnot have been made to the job to trigger. These situations can be attributed to many things lyk system performance, or some internal comm failure, some DB dead locks etc.,.
    Now for the first one, start the job immediately with high priority ( if required ) and once completed reschedule it again as normally it is running
    for the second , you can trigger the particular event in sm64 and c has the job came to active state or not.
    or else you can copy the job and schedule is immediately.
    Hope this helps
    Janardhan Kumar

  • Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi,
    I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
    But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
    Regards,
    Arminder Singh

  • Convert Spool to PDF and mail for the jobs not run in background.

    Dear All,
    I need to convert the spool job into pdf and mail as attachment for job not run in background.
    I am printing the bills  using the program  SD70AV3A to print the bills in a batch using the SUBMIT.
    But i am not using the spool options since its going to into waiting state in spool...and i need to change the printer properties to G
    to get the printer to print the reports as these jobs run in backgroud....but this solution is not acceptable solution.
    SUBMIT SD70AV3A
             WITH RG_KSCHL-LOW = 'ZRR'
             WITH RG_NACHA-LOW = '1'
             WITH PM_VERMO = '2'
             WITH PM_NSORT = '1'
             WITH RG_VBELN IN range.
    *        TO SAP-SPOOL
    *        SPOOL PARAMETERS print_parameters
    *        WITHOUT SPOOL DYNPRO
    *        VIA JOB name NUMBER number
    *        AND RETURN.
    so how do i get the spool number from the above after the job is submitted....and then convert into pdf and mail
    please suggest some solution. I have searched on net but most the solutions are say to run the job as background job...
    i have also looked into the program RSTXPDFT4 but it asks for the spool id ....how can i get spool id for the job that has been completed.
    please suggest some solution.
    Thanks
    Bhargava.

    Hi,
    Spool to PDF : FM 'CONVERT_ABAPSOOLJOB_2_PDF'
    Table TSP01 to get spool number
    You ,may need to convert OTF to PDF: FM CONVERT_OTF
    and the to binary : FM 'SMCS_XSTRING_TO_BINARY'
    To send mail use class: cl_document _bcs.
    Regards,
    Maria João Rocha

  • What's the Difference Between Logic Board Failure and Hard Drive Failure

    Hi!
    So I wanted to know the difference between a Logic Board Failure and Hard Drive Failure because a couple of days ago I tried starting my computer up and I was welcomed by the Apple chime and a grey screen. I have been researching and most people say its either the hard drive or the logic board. So I am curious to know what are the symptoms of both. Thanks a lot, in advance!

    The hard drive is where the OS resides, if it dies there is no OS loading, so you can't boot. If you hook up your external drive with your clone of the internal drive, boot up and hold down the option key, select your clone drive as the startup drive in boot manager that then appears, and the computer boots normally, then the computer is OK, it is just the internal drive that has gone south. You don't have a clone to boot from? Now you know why you should.
    You could try booting from the DVD that came with the computer, hold down the "D" key to run diagnostics and see what the results are. If you can't boot into the diagnostics then a trip to the Apple store is probably in order.
    Francine
    Francine
    Schwieder

  • Need to run the JOB without Ineractive Screen

    Dear All,
    We have written a new ABAP program for executing the Macro background Job and used JOB_OPEN,JOB_SUBMIT and JOB_CLOSE Function Modules to run the JOB from ABAP Program.  We are able to run the JOB successfully for Any other ABAP Programs through the custom program, but when I tried with the same approach to run the Macro job through my new ABAP Program the JOB is throwing an error.
    Error Message is like below
    Job started
    Step 001 started (program /SAPAPO/TS_BATCH_JOB, variant TEST, user ID GKMN3511
    Specify a start time
    Job cancelled after system exception ERROR_MESSAGE
    Point of doubts:
    -- Can we really execute the Macro job through the ABAP program with out any dialogue screen (because when I use the "/SAPAPO/MC8G - Schedule Demand Planning in the Backgroundu201D program in my custom program it pop-ups a interactive screen which I don't want in my ABAP program while scheduling the macro job)
    Regards,
    Raju

    In transaction /sapapo/mc8t --> define the activity that looks at the macro in question
    In transaction /sapapo/ mc8d --> define the job that looks at that activity and a selection iD/aggregation level
    In transaction /sapapo/ts_batch_run --> save a variant pointing to the job defined in mc8d
    you can then run the /sapapo/ts_batch_run job with that variant

  • Unable to schedule a job from the Jobs Library

    Hi,
    I have created and stored a job in the Job Library, however when I try and submit it to run with a schedule and against specified targets Grid just seems to hang, and eventually it comes back with "Application server is not responding". I have set it up as a sql script and used a PL/SQL block, I have tested the script outside of Grid and it works fine. I have tried using prefered credentials and override credentials, but this makes no difference.
    I am running OEM 10g Release 3 on Red Hat Enterprise Linux AS release 4 (Nahant Update 4)
    Anybody had anything similar?

    Thanks for the reply. Tested connectivity to both databases from Grid all looks good. Attempted to set up a job individually for each db and it hung on both, again I tried using default credentials and override credentials.

  • Not able to run the job with user id - is

    Hello experts,
    We have problem.
    Every day we run the job.
    ( the job contians two programs called  ZTIBCOPRG  and J_5HJSTP  )).
    I would like to know why the above job is running with the user ID TIBCOADM.  Because this user has German settings for the size conversion in program ZTIBCOPRG and we are having some issues.
    We changed the user to TIBCOUSA and the job would not run. 
    We have changed the user back to TIBCOADM.  It is running.
    KINDLY HELP ME WITH YOUR VALUABLE inputs.   YOUR HELP WILL BE HIGHLY APPRECIATED.
    I have checked for both users in AGR_USERS  table.
    The AGR_USERS is the old user and have many roles compared to userid TIBCOUSA.
    WHERE WE NEED TO SEE . IS it authorisation problem or the other user with whom unable to run the job ?
    or is this the error in the program ZTIBCOPRG which is not able to do size conversion and causing some issues.
    Thanks and Regards,

    Hi,
         after running the job with user id TIBCOUSA, it should be in cancelled state as per your comments.
    you just select the cancelled job and type JDBG in command box and enter it takes you to Debug mode.
    There you may get some information where it is failing.
    Sudheer. A

  • User is getting email delivery failure when processing via SAP as it tries to send an email to a user who have left the company

    Hi Experts,
    I need to remove a name on a group list in Outlook as the user is getting email delivery failure when processing via SAP (He sends the invoice for approval and emails get sent to different users for approval.) One of those users has left the company and so the user gets a email delivery failure error.
    How do I remove this user who is no longer with the company?
    The user is saying: When I approve an invoice in SAP it sends an email notification through outlook. One of those users is no longer with the company so it cannot deliver the notification, and in return send a delivery failure (in outlook). I am approving the invoices from my SAP Workplace inbox.
    How do we know what group the email is going to?
    Please let me know if you have seen this issue before. Greatly appreciate your help.
    Thanks,
    Asad

    Hi,
    Please check whether you are using a custom z program for sending emails of approved invoices to users. If yes then either the user email ids are hardcoded in the program else a ztable is maintained for them.

  • Can we assign the jobs of a thread to other thread

    hi
    need some help
    suppose say a thread A is running and doing some processing. Can this thread A, at a specified time delegate all its jobs to an other thread B, and exit
    gracefully? The thread B should take up the jobs left over by thread A and continue processing them.
    If so how can we implement this?
    please help me.
    thanks in advance
    sunil

    As has been said in other recent discussions regarding threads, a thread pool and a task queue would do the job.
    Two main decisions: How to break down the tasks at hand to allow a "graceful transfer" and how to activate the new thread?
    Regrading 1: You need to break down the overall task into subtasks, which can be performed by individual methods and that can pass on the state of excecution to the next step in the process.
    Either the processing sequence is predetermined or the next step is part of the result set of the current subtask. The queue then holds these tasks for assignment to threads.
    Regarding 2: Central thread generation vs. decentral approach: For a clean and debuggable design,
    you should go for one "factory" in you application, that is creating threads and handles task assignment. That has the additional benefit, that coordination and load-balancing can be implemented as well (to avoid too many threads or support partial paralel processing). Also, you should re-use threads, instead of letting them die and re-create new ones.

  • How to put a SQL Agent Job wait in the trigger while the job is running.

    Hello!
    I am not a geek in writing t-sql code so I am seeking forum help in completion of my task.
    I have a trigger which fires upon a action and with in that code, I am starting a job via t-sql like
    EXEC msdb.dbo.sp_start_job N'JobName';
    Now, I want to check the condition like that, If the trigger got invoked while the job is running, it should wait till the successfully completion of the job.
    Thanks for your time and help on this.

    You can use Context_info with Wait for delay 
    Below are some useful links..
    http://www.sqlservercentral.com/articles/T-SQL/2765/ 
    http://technet.microsoft.com/en-us/library/ms180125(v=sql.110).aspx 
    http://ask.sqlservercentral.com/questions/42786/how-to-avoid-a-stored-procedure-to-be-executed-par.html
    Thanks,
    Saurabh 
    http://www.linkedin.com/in/sbhadauria http://www.experts-exchange.com/M_6313078.html

  • How can we change the Job priority in the Source system

    Hi All,
    We are facing an issue with the process chain execution in the Production system. We have a process chain which runs daily in BI system and the chain is designed in such a way, that as soon as the chain starts in BI system,  a corresponding job is triggered in the Source system (ECC  6.0system).
    Now the issue is that after we have our Source system upgraded the memory allocation for the particular Job (FIGL )is reduced and due to which the FIGL job is failing frequently. When we have consulted some experts.They  advised Us to increase the Priority of the Job in source system to A/1, as of now the job is running in B/2 priority.
    Please let us know the way how we can increase the priority of the Source system Job, so that when the process chain triggers a job in source system and that particular jobs  should run with Priority A/1.
    Thanks in advance.
    Regards,
    Chandra.

    Hi Chandra,
    First please find the job name in SM37 for FIGL and check the job status to be in "released" status. Select that job and go to job menu and click on change. then it will take you to the job screen where you have "job class". Here you can change the job class to "A" to get to high priority.
    If you are unable to edit the job then create a new job with the same variants by clicking STEP button in the Job screen.
    Try these steps, let me know if are able to do so.
    Regards,
    Ravi Kanth

  • How to compare two strings whether both are equal while ignoring the difference in special characters (example: & vs & and many others)?

    I attempted to compare two strings whether they are equal or not. They should return true if both are equal.
    One string is based on Taxonomy's Term (i.e. Term.Name) whereas other string is based on String object.
    The problem is that both strings which seem equal return false instead of true. Both string values have different special characters though their special characters are ＆ and &
    Snapshot of different design & same symbols:
    Is it due to different culture or language?
    How to compare two strings whether both are equal while ignoring the difference in special characters (＆ vs &)?

    Hi Jerioon,
    If you have a list of possible ambiguous characters the job is going to be easy and if (＆ vs &) are the only charracters in concern awesome.
    You can use the below solution.
    Before comparing pass the variables through a replace function to standarize the char set.
    $Var = Replace($Var,"＆","&")
    This is going to make sure you don't end up with ambiguous characters failing the comparison and all the char are "&" in this case.
    Similar technique is used to ignore Character Cases 'a' vs. 'A'
    Regards,
    Satyajit
    Please “Vote As Helpful”
    if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Maybe you are looking for