The new table and Columns to look for in picking headers, etc

Hi,
What are the new tables and columns to look for mapping the following old ones:
1) Pick_Slip_Number from So_Picking_Headers,
2) Sequence_Number from SO_Picking_lines
3) Line_ID from So_Note_References
Thanks and Regards,
Praveen

<BLOCKQUOTE>quote:<HR>Originally posted by ravi alladi ([email protected]):
Actually would it be possible to get a list of all changes in Order Management between 11 and 11i? ie what tables added, what have been modified and which ones are obsolete<HR></BLOCKQUOTE>
Ravi
Actually, we are working on that same analysis. If you receive any responses, please forward to myself as well.
Thank you
Sha Green

Similar Messages

How to find the new tables and columns in a schema

hi..good morning to all...
I have a schema ABC which owns some objects.
Now some days before I have made another schema XYZ which was a replica of ABC schema.
between these days some new tables, new columns in the existing tables(with or without default value), comments on the columns are being added in the new schema i.e XYZ schema.
Now I have to find the extra things which are present in the new schema. I need to find the new tables, new columns in hte existing tables, their default values and descriptions of those.
Can u plss help me how can I find it?
I am guessing that I have to write a SQL query with a minus clause but I am not able to write it and also dont know where should I execute it.
plss help. thanks in advance.

And moreover, when I am executing the query to get the desired result, then it is throwing "illegal use of long datatype" error and pointing to the b.data_default area of my query..
select a.table_name, a.column_name, b.data_default, a.comments from all_col_comments a, dba_tab_columns b
where a.TABLE_NAME=b.TABLE_NAME
and a.OWNER=b.OWNER
and a.OWNER=XYZ
minus
select c.table_name, c.column_name, d.data_default, c.comments from all_col_comments c, dba_tab_columns d
where c.TABLE_NAME=d.TABLE_NAME
and c.OWNER=d.OWNER
and c.OWNER='ABC'
order by 1, 2;
plss help...

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is!

I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is! Can anyone help??

You selected Encrypt iPhone Backups in iTunes. Then you entered a password.
It would be that specific password it is asking for.
See here:
https://discussions.apple.com/thread/3284065?start=0&tstart=0

I can scroll sparatically. I downloaded the new version and it worked good for a week. It starts and stops.

I use firefox on facebook.. Scrolling is sparatic. When I try and click on something it doesn't work. The screen will go blurry for about 30 seconds then it will clear and I can scroll or click for a second then it will do it again.

i just fixed this on my machine running 10.6.8. the typical workaround is to add appropriate UUIDs, which get updated with each new os build, and break plugins (see here). Follow those instructions, but instead of adding the UUIDs they suggest for 10.6.7, add these (I found them on my machine running 10.6.8, and they work):
064442B6-53C0-4A97-B71B-2F111AE4195B
588FF7D1-4310-4175-9980-145B7E975C02
for fixing on os x version 10.6.7, this may help (though letterbox 0.24b9 should work already).
i emailed the author (aaron harnly, harnly.net) about this, but haven't heard back (a few days). to be sure, i am quite grateful, as i think we all are, for his excellent plugin, and this workaround is quite simple for dealing with updates.

Capture DB Table and column comments when creating new Business Area/Folder

Does anyone know if it is possible to pull the DB table and column comments into Discoverer when creating new Business Area/Folders? Our developers take the time to put the information in the Db data dictionary and we would like to leverage it (reduce need for manually adding descriptions) ... has anyone done this?
If there isn't a way to automatically do it, would there be any harm in using a sql script to populate the description fields from the DB data dictionary directly into the EUL tables appropriate?
I have been searching through documentation and forums for information - with no luck at this point.
Thanks!

Hi Seymour
You can add column comments to views as well, as this example will show:
CREATE OR REPLACE FORCE VIEW MY_SEQUENCE
(SEQ_ID, SEQ_NAME, SEQ_NEXTVAL)
AS
SELECT "SEQ_ID","SEQ_NAME","SEQ_NEXTVAL" FROM EUL5_SEQUENCES;
COMMENT ON COLUMN MY_SEQUENCE.SEQ_NAME IS 'The sequence';
So you could add the comments at the view level and then refresh Discoverer.
Best wishes
Michael

Parse SQL query and extract source tables and columns

Hello,
I have a set of SQL queries and I have to extract the source tables and columns from them.
For example:
Let's imagine that we have two tables
CREATE TABLE T1 (col1 number, col2 number, col3 number)
CREATE TABLE T2 (col1 number, col2 number, col3 number)
We have the following query:
SELECT
T1.col1,
T1.col2 + T1.col3 as field2
FROM T1 INNER JOIN T2 ON T1.col2=T2.col2
WHERE T2.col1 = 1
So, as a result I would like to have:
Order Table Column
1 T1 col1
2 T1 col2
2 T1 col3
Optionally, I would like to have a list of all dependency columns (columns used in "ON", "WHERE" and "GROUP BY" clauses:
Table Column
T1 col2
T2 col1
T2 col2
I have tried different approaches but without any success. Any help is appreciated. Thank you in advance.
Best regards,
Beroetz

I have a set of SQL queries and I have to extract the source tables and columns from them. In a recent db version you can use Re: sql injection question for this.

I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

That's a very broad question and difficult to answer without knowing more about you requirements.
Try starting on this page Category review: library management software for the Mac |Part I and part II to get a starting point.
regards

Can we hide the tables and columns from subject areas in the front end

Hi,
Is there any way to hide the tables and columns from the subject area in front end.I need to create a report with some tables which the user does not want to see.So after creating the reprot can I hide those tables and columns in the front end

Hi,
Your question is not that clear to me...do you want to hide the entire table/column that dont want to show up in the front end then you could do in Presneation Layer in the RPD by going Permissions in the property of that object.
But if you want to hide the column in the report that can be visible in the subject Area: go to column properties -> Column fomat...thereis Hide option.
Can you please elaborate your question...what exactly you are looking for...
--SK

Using of already existing logical tables and columns in a new subject area.

Hi Every one,
i am new to OBIEE technology.
In my project i need to create a new subject area for already existing RPD.
In that RPD there are some logical tables and column created for previous project and i need to use those in this new subject area that i am going to create.
My question is what is the best way to use them .
I mean just to drag and drop them into new subject area or any other way.
please have your valuable suggestions
thanking you

Yes, you can basically copy paste all the tables that you need from BMM layer into your new folder in the presentation layer. Just make sure all the joins are defined well between all the tables that exists in the new folder, so you wont end up running into ODBC errors when you run analysis.
Hope this helps.
Thanks,
-Amith.

Including table and column comment in the Data Modeler

Hi all,
I used Oracle's SQL Developer Data Modeler (Version 3.0.0.665) and created a data model for my project. I e-mailed a PDF format of the data model to our Systems Analyst. She asked if I could re-create the data model and include table and column comments. Is this a possibility and if so how is this done?
Thank you for your input,
Seyed

Hi Kent,
Using the information you provided and Oracle’s Working with SQL Developer Modeler Reporting I did the following:
1) Created a Reporting Schema User
1.1) Using my Oracle 10g Personal Edition, I created a new user and gave him DBA administrative privileges
2) Exported Relational Design to Reporting Schema
2.1) Opened the Relational Design
2.2) Exported it to the Reporting Schema. Note, I never got a message ‘Design has been exported successfully’.
3) Reviewed the Report Results
I think exporting the relational design was not successful, and didn’t get any error messages. Had step 2 completed successfully, I would have reviewed the Report Results in SQL Developer. By the way, I know I have marked this topic as closed, but would like to learn your method too.
Thank you for your help,
Seyed

Added Articles and ran snapshot, but the new tables not showing up

I have a publication that is running on 2012 SQL server. I added several tables, some stored procedure and some views. Then I selected 'view snapshot agent service' and selected start. It says running, and then says '9 articles published'
(or something like that) but the number is incorrect. It should be a LOT more than that. Then when I look at the subscriber, it doesn't have the new tables. Thanks for any help you can offer.

After creating a new snapshot did you start synchronizing the subscriptions which applies the schema and data for the newly
added articles
--Prashanth

Getting the original values in table maintenance and the new one and send t

Hello experts,
In table maintenance, I need to capture the original values in that selected column/field and
also the new one and send it to email. For example, I have a field in my z table named zaddress and whenever
the user changes the contents of that selected row I need to get/fecth the original value and the new and send it to email.
So the email will be something like this:
Dear Admin,
Changes were made to ztable. Here are the changes:
Customer : Customer 1
Order no : 1
Original Address : example address A
New Address : example address B
NOTE: Do not reply to this email.
Again, thank you guys and have a nice day!

Hi Vijay,
1.
If u r using Modulepool programming to change the field contents ,u just capture field value into one variable .This is possible in PBO.before displaying .once u change the field value and press something ,now capture changed value in another variable .This is possible in PAI.After pressing something to modify Database.
I think u can get one idea after reading this .
2.
For sending mail it is not a problem.
You can check the following code.
*-------Mail related tables ,structures and variables
DATA:
 w_subject LIKE sodocchgi1,
 i_pack_list LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
 i_objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
 i_contents_text LIKE solisti1 OCCURS 10 WITH HEADER LINE,
 i_cont_bin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
 i_objhex LIKE solix OCCURS 10 WITH HEADER LINE,
 i_receiver LIKE somlreci1 OCCURS 1 WITH HEADER LINE,
 i_listobject LIKE abaplist OCCURS 1 WITH HEADER LINE,
 pdf LIKE tline OCCURS 100 WITH HEADER LINE,
 content_out LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA:
 tab_lines TYPE i,
 doc_size TYPE i,
 att_type LIKE soodk-objtp,
 obj_desc LIKE w_subject-obj_descr,
 sent_to_all LIKE sonv-flag,
 client LIKE tst01-dclient,
 name LIKE tst01-dname,
 objtype LIKE rststype-type,
 type LIKE rststype-type,
 is_otf TYPE c ,
 no_of_bytes TYPE i,
 pdf_spoolid LIKE tsp01-rqident,
 jobname LIKE tbtcjob-jobname,
 jobcount LIKE tbtcjob-jobcount,
 pn_begda LIKE sy-datum,
 val(1) TYPE c,
 pripar TYPE pri_params,
 arcpar TYPE arc_params,
 lay TYPE pri_params-paart,
 lines TYPE pri_params-linct,
 cols TYPE pri_params-linsz,
 spool_name TYPE pri_params-plist.
CLEAR :w_subject,
 sent_to_all,
 i_pack_list[],
 i_objhead[],
 i_cont_bin[],
 i_contents_text[],
 i_receiver[].
i_cont_bin = ' | '.
APPEND i_cont_bin.
Subject of the mail.
obj_desc = 'Outstanding Appraisals' .
w_subject-obj_name = 'MAIL_ALI'.
w_subject-obj_descr = obj_desc.
Body of the mail
DATA :head_desc LIKE i_contents_text,
 body_desc LIKE i_contents_text.
i_contents_text = space.
APPEND i_contents_text.
CLEAR i_contents_text.
CONCATENATE
'Please refer to the attached list of appraisal(s) that require your'
'attention. Please log in to the eHR System and use the eAppraisal'
'function to work on it.'
INTO body_desc
SEPARATED BY space.
i_contents_text = body_desc.
APPEND i_contents_text.
CLEAR i_contents_text.
CLEAR body_desc.
i_contents_text = 'Thank You.'.
APPEND i_contents_text.
CLEAR i_contents_text.
i_contents_text = space.
APPEND i_contents_text.
CLEAR i_contents_text.
CONCATENATE '(Note: This is system generated message, please'
 'do not reply'
 'to this Email.)'
 INTO i_contents_text
 SEPARATED BY space.
APPEND i_contents_text.
CLEAR i_contents_text.
Write Packing List (Body)
DESCRIBE TABLE i_contents_text LINES tab_lines.
READ TABLE i_contents_text INDEX tab_lines.
w_subject-doc_size = ( tab_lines - 1 ) * 255 + STRLEN(
i_contents_text ).
CLEAR i_pack_list-transf_bin.
i_pack_list-head_start = 1.
i_pack_list-head_num = 0.
i_pack_list-body_start = 1.
i_pack_list-body_num = tab_lines.
i_pack_list-doc_type = 'RAW'.
APPEND i_pack_list.
CLEAR i_pack_list.
Create receiver list
 i_receiver-receiver = g_email_next_man.
i_receiver-rec_type = 'U'.
APPEND i_receiver.
CLEAR i_receiver.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = w_subject
 put_in_outbox = 'X'
 commit_work = 'X'
 IMPORTING
 sent_to_all = sent_to_all
 TABLES
 packing_list = i_pack_list
 object_header = i_objhead
 contents_bin = i_cont_bin
 contents_txt = i_contents_text
 receivers = i_receiver
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
IF sy-subrc NE 0.
ENDIF.
I think it helps u something.
Thanks,
Venkat.O

Nsert/Update and Add Column at the same Table and at the "same" Time

Hello,
I want Insert/Update and Add Column at the same Table and at the "same" Time but in different sessions.
Example:
At first the "insert/update" statement:
Insert into TestTable (Testid,Value) values (1,5105);
After that the "add" statement:
Alter table TestTable add TestColumn number;
- sadly now I get the message: ORA-00054: resource busy and acquire with NOWAIT specified
"insert/update" statement:
Insert into TestTable (Testid,Value) values (2,1135);
After that the execute commit.
I don't know when the first session set the commit statement so I want that the DB the "Alter Table..." statement execute if it's possible.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.
Thanks for ideas

Well I want to walk in the rain without and umbrella and still stay dry, but it ain't gonna happen.
You can't run a DDL statement against a table with transactions pending. Session 2 has to wait until session commits or rollbacks (or until the session is killed). That's just the way it is.
This makes sense if you think about it. The data dictionary has to be consistent across all sessions. If session 2 was allowed to change the table structure whilst session 1 has a pending transaction then the database is in an inconsistent state. This is easier to see if you consider the reverse situation - the ALTER TABLE statement run by session 2 does a DROP COLUMN TESTID rather than adding a column: now what should happen to session 1's INSERT statement? You have retrospectively invalidated a statement that was perfectly legal when it was executed.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.Fnord.
Cheers, APC

Updating Infotype 0077 for the New Race and Ethnicity Codes

Hi,
I would like to ask for a help or any ideas on below case:
There are new race and ethnicity codes required by the US EEO Law. I've already maintained them in table T505R. My problem now is on how infotype 0077 records of the employees will be updated showing the new race and ethnicity codes. Program RPURACU0 is use to update the records in infotype 0077. In this program, I first map the old ethnic origin to the new race and ethnicity codes. But after I've run and execute the program, infotype 0077 records of the employees still shows the old ethnic origin codes. It does not show the new race and ethnicity codes which should be based on the mapping I've done.
Another problem is that in infotype 0077 in the field "Ethnic Origin", upon clicking on the drop down list, it shows all of the entries I've entered in table T505R. I think that ethnicity and race categories should be two different fields and thus, there should be another field for the race categories. May I know on how to add such field?
To summarized, I need help in the following:
-how to update infotype 0077 showing the new race and ethnicity codes
- how to create field "Race" in infotype 0077 to display the new race categories
Thanks in advance for your help!

Mary,
We have applied the relevant note, updated MP007700 (as below) and executed program RPURACU0 with the required mapping. However, the Race field check boxes are not visible on IT0077 because as you can see the relevant field is not listed below.
Module Pool          MP007700            Variable key    10
Standard screen      2000                Feature
Alternative screen   2010
Next screen          2010
001     P0077-RACKY     Ethnic origin
002     P0077-MILSA     Military status
003     P0077-ETHEN     Ethnicity
004     P0077-SURVY     Survey answered
005     P0077-DISAB     Disability
006     FRAME_2     Veteran Status
007     P0077-MEDIC     Benefit Indicator for Medicare
008     P0077-DISDT     Date of Determination of Disabil
009     P0077-DISLE     Date Employer Learned of Disabil
011     P0077-EEOEX     EEO Exempt Indicator
012     Q0077-VETS2     Veteran status
013     Q0077-VETS3     Veteran status
014     Q0077-VETS4     Veteran status
015     Q0077-VETS5     Veteran status
016     Q0077-VETS6     Veteran status
017     Q0077-VETS7     Veteran status
018     IT_ITAB-MARK
019     Q0077-VETS1     Veteran status
021     FRAME_1     Additional Personal Data
023     FRAME_3     Disability
Thanks!
Edited by: Victoria Nate on Sep 23, 2008 6:35 PM

The new table and Columns to look for in picking headers, etc

Similar Messages

Maybe you are looking for