The report I published on the SQL server report server is not showing in the application we use to retrieve reports.
The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.
Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
Similar Messages
-
Hi,
I Published a report on the report server but it's not showing in the internal application we use to access reports. The name of the application we use is called MAMA and this application has access to all the reports on the SQL report server. My email is
[email protected] my cell phone number is 201-888-7952.
Thanks.Hi Roger,
Based on my understanding, you publish a report on the report server. When you access reports with internal application, the report doesn’t display, right?
In your scenario, since you mentioned you have published the report to report server, please go to report manager, check if you can see the published report and open the report properly. If the published report is displayed on report manager, it should not
be the issue in Reporting Services. In this scenario, since the MAMA application has established connection with on report server, it may not update items on report server after you publish your report onto report server. So please try to “refresh” in MAMA
or reconnect the report server. If issue persists, I suggest you contact the MAMA application vendor to get some more effective advices.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu -
i live in the UAE and i dont have the face time app on my iphone 5 and it's not showing in the settings list as well only face time mentioned in the notification center , my friends in the same area are using face time normally any advice?
Doesn't matter. That store is likely selling illegit iphones, brought oin from somewhere else.
The fact remains the UAE government does not allow Facetime on iphones legitimately sold there. -
Greetings -
I have a custom field on a PDP that is used to manually flag a project for review. Once the field is set to "Flag" a red flag should show on the Project Summary page prompting the Portfolio Manager to follow up. The red flag only appears
after publishing the project via Project Pro 2013 not by just editing the PDP via Explorer (Save and Check in).
This occurs on both projects that were created prior to the graphical indicator being added to the PDP and new projects.
Now if instead of using the red flag graphical indicator I just used the text "FLAGGED" that would work fine.
So is this a bug? Or is something setup incorrectly? Or is this how PWA is supposed to handle graphical indicators on the project summary page?
Any help would be much appreciated.Hi Gunnery,
I made the following test: I create 2 project ECF both inserted in the Project details PDP:
for review: flag type field with graphical indicator in case value = yes
for review_2: text type field (with a yes/no look-up table) with graphical indicator in case value = yes
Whitout going to Project Pro, I'm able to modify the 2 fields for any project (created before or after the ECFs creation) and the graphical indicators are instantaneously shown in the summary project center view (just pressing F5).
Note that the graphical indicator is not shown in the PDP, just the text value. Note also that I've not been to Project Pro neither to PWA/schedule PDP to publish the project plan.
Then
Does that correspond to your need? Can you reproduce this example and validate wheither or not it works.
Guillaume Rouyre - MBA, MCP, MCTS -
Dashboard is not showing on the Dashboard banner (menu)
I have created total 15 Dashboards. In that when i am opeining Presentation services only 7 Dashboard's showing. Remaining Dashboard's not showing. I given access every one to Read to all the Dashboards
and One Dashboard opening by default but it is not showing in the Dashboard banner. please reply your Answers. Thanks in Advance.Go to Dashboard properties through the Catalog, chances are the missing ones are either hidden, system or do not index.
-
Process Chain got struck and not showing all the variants in the log view
Hi,
We have some process chains which are running daily.The problem here is that one of the process chains got struck at some point
and it is not showing all the variants in the log view but able to see in planning view.
Could any one please let me know why this is occuring.Hi Ramanjaneyulu,
Thanks for the reply.
As you said,i clicked on the 'display message' but it is not showing any errors.It is showing
that the process completed successfully.
Thanks. -
Itunes it's not showing me the last date/time the iPhone/iPad was backed up.
I just backed up my iPhone and iPad but iTunes it's not showing me the last date/time my device was backed up. I had just done a backup about 3 hours ago. And when I go to check the backup location I see a folder there with the time it was last backed up. But it's not showing me the backup date in iTunes. I don't know what to do.
I already tried to remove the folder in App. Support-Mobile Sync and start a brand new backup. But no date.
Tried to delete and start a new iTunes folder in Music but nothing has changed
Any solution is welcome!iCloud requires OS X Lion (10.7.2) or higher. You will need to upgrade to either Lion higher in order to set up iCloud on your Mac. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion requirements are shown here: http://support.apple.com/kb/HT5444.
Mavericks requirements are shown here: http://support.apple.com/kb/HT5842.
If you can run Mavericks, you can purchase an upgrade from the Mac App Store. If you can only run Lion or Mountain Lion, contact the online store in your country and purchase a redemption code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table. -
BI publisher report is not showing all the data
Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.KalidossHi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks. -
Hi,
a wired glitch in my SSIS 2005 package in production server where the FTP folder location is not showing but its existing in my laptop version
EX: - t01/app/_res folder
When i open the package from the production server "_res" is not showing within the remote path in the file transfer task.
but "_res" folder is shown in my development environment.
I tried with winscp FTP software in the production sever , and was able to access the "_res" location through the FTP software. What could this be? a BIDS sofitware version issue???
VS 2005 Version in development server
-Is 8.0.50727.42(Premier Partner ENU) .net framework is 4.5.1
VS 2005 Version in production server
-Is 8.0.50728 (Premier Partner ENU) .net framework is 2.0 Service pack 2.0
thanks.When you open the package on the production server, do you mean opening it with your Windows account from BIDS on that server? Ff the ftp connection in the package has a password it will have been stored in your laptop when you designed the package. when
you deployed the pacakge on the server as a file and open it with BIDS then the password will be gone. You would have to go into the package ftp connection properties, reassign your password and save the connection and the package again.
Jan D'Hondt - SQL server BI development -
I am wanting to update iphone to 4.3.3 software. however itunes is telling me it is unable to connect to update server as i am not connect to the internet. yet i clearly am connected... Please help
Looks like I've asked a really old/common question - toonz posted the answer - I've copied it below. Thanks toonz, everything now ok.
Correct AnswerRe: Updating to 1.1.3 02-Feb-2008 23:19 (in response to alibeau)
You can fix this by following the steps in this article:
http://docs.info.apple.com/article.html?artnum=304468
Liked (1) -
Ok I’m completely lost here....
I’m running Microsoft Windows XP Home Edition Service Pack 3 (Build 2600), I updated iTunes to 11.0.2.25 and some other updates for windows last night on my laptop. I try connecting to download the iOS 6.1.2 update for my iPhone 4 and my iPhone 5 via iTunes. I am getting this message for both "iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connection is active and try again." Everything was fine with connecting prior to running these updates because I downloaded the 6.1 update with no problems when it came out.
What I have done so far with which has made no difference:
Checked my internet connection
Changed my internet connection
Signed out of iTunes and then signed back in
Ran diagnostics via iTunes, comes back with: Network interfaces verified- Internet connection failed- Secure link to iTunes store verified
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-02-20 20:40:48.
Disabled firewall, spy sweeper, virus scanner
start>run>cmd> typed "netsh winsock reset"
Rebooted
Checked the parental controls in iTunes
Start>control panel>internet options>connections tab> lan settings> selected the "automatically detect settings"
Deleted iTunes and reinstalled iTunes
When I would "ping gs.apple.com" it would come back with "request timed out" no matter what internet connection I was on, so I went into the hosts file start>my computer>(C:)>WINDOWS>system32>drivers>ect>HOSTS and added "# 127.0.0.1 gs.apple.com". Now it will ping gs.apple.com just fine but still comes up with the "iTunes could not contact the iPhone software update server because you are not connected to the internet" message in iTunes when i try to download the update.
If anyone can come up with any ideas that I haven’t tried, please let me know. This is keeping me back from updating both of my phones along with if anything should ever happen to them; restores as well.im computer is connected i can go to the apple store through itunes but when i plug my phone in i keep getting that alert... i plugged my phone in to update it after the apple loaded the itunes icon and a usb showed up.
-
Hello all, new to the forums.
I've been recieving the error message "itunes could not contact the ipod software update server because you are not connected to the internet". This problem didn't occur at all for the past 2 years of using itunes.
I've already scanned through numerous websites and forums for help, but none of them worked.
This set of instructions resulted in no change to any of the problems, though iTunes lists that as the supposed solution.
# Open Internet Options from control panel.
# Click the Connections tab.
# Click the LAN Settings button.
# Select the Automatically detect settings checkbox.
Others include installing IE7, which that didn't work either.
Can anyone help?Here it is:
Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
LENOVO 2537FC4
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DB3100363E3C0
Current user is not an administrator.
The current local date and time is 2011-06-16 17:03:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA NVS 3100M
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {505BB17D-FA14-4FA0-9D77-F7998FEBB435}
Description: Intel(R) Centrino(R) Advanced-N 6200 AGN
IP Address: 192.168.0.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Thu Jun 16 16:54:56 2011
Lease Expires: Fri Jun 17 16:54:56 2011
DNS Servers: 192.168.0.1
68.94.156.1
Adapter Name: {610821DE-0532-4C65-839B-B74B65859FBA}
Description: Intel(R) 82577LM Gigabit Network Connection
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {10983C8A-FCDA-4B2F-8A89-E1596BA6B7BA}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: Broadband Connection
Connected: No
Online: No
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-06-16 15:35:33. -
Designed Reports are not showing in the Analysis Report List
Hello Master's,
I have designed one report as per our client requirement, and assigned also, but its not showing in the analysis reports list.May i know what setting needs be done to appear in the reports list?.
How to create and add the characteristics(New Fields) in the reports, here we can able to create and add the key figures.
Kindly update the solutions with steps.
For you reference please find the below screen shot.
Thanks in Advance......!
Kind Regards
Shankarappa H LHi Shankarappa,
The Analysis -> Reports shows a list of views. Hence, once you create a report you need to complete two mandatory steps.
1. Create a View
2. Assign Report
For more information, please refer to the following link: In conversation with Sebastine Augustine, product manager redefining Business Analysis that forms an integral part of th…
Thanks,
Sebastine -
The cluster server element 441305751 is not added in the EP cluster context
Hello Experts,
We are using load balancer to distribute the load across of our four portal servers nodes. Lately, two of our nodes are behavior very strangely; it continuously stopped working momentarily and it started back up again automatically by it self. And the users usually received a message u201C500 internal server erroru201D.
#1.5 #001372559B8800280000000200002D940004692BC78C988A#1241536659228#com.sap.engine.services.prtbridge##com.sap.engine.services.prtbridge####n/a##defe75c0398711debfb1001372559b88#SAPEngine_System_Thread[impl:5]_55##0#0#Error#1#/System/Server#Plain###
The cluster server element 441305751 is not added in the EP cluster context,
because prtbridge on 441305751 is stopped or not yet started (maybe the server is starting or shuting down).
Any helps would be appreciated,
davidnHI David,
Did you figure out why it happened? we have same exact problem and same log was written, could you please share your solution.
Thanks -
Essbase server is not showing in the windows services (11.1.2.1)
Hi All,
Essbase server is not showing in the windows services 11.1.2.1. when I checked the processes from task manager it is there.
Regards,The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
How can I change my iCloud my e-mail-account
How can I change my iCloud my e-mail-account?
-
Nls support with oracle xml parser in java
I'm using The JAXP interface to manipulate xml with xsl. the implementation that I use is Oracle xml parser. My xml contains a lot of hebrew chars, and in the result stream each char translated into 5-6 chars, which makes the result to be 5-6 times b
-
How to create/get user & role in Weblogic 9.2 programmatically?
Hi, I am new to Weblogic 9. I need to create a web service to manage user/role in WebLogic 9. Searching thru the web and found some classes like: AtnSecurityMgmtHelper, AtnProviderDescription etc Are those the correct classes to create/retrieve user
-
my issue is... my fire wire 400wont read any firewire 400 device, but my 800 port works fine. however, e wheni route my f 400 devices through my 800 drive, or port, the 800 device is ultimately disengaged ( removed) by the system. i can understand th
-
QFS don�t update File System space after a failover
When I do a fail-over (get down a master node of device QFS) while I delete a file the space on it (FS) is inconsistent (df command show mayor space than du command) and I have to do a file System Check on it to get free space.