The stdout and stderr in javaw.exe enviroment

hi,
when i run a class using java.exe enviroment,the stdout and stderr is the console,but can someone tell me that where the stdout and stderr in javaw.exe is?
or javaw.exe don't have stdout and stderr ?
thanks for your answer

When you use javaw.exe, whatever you send to stdout and stderr goes to what computer old-timers call the "Bit Bucket". That means it disappears. But you can redirect stdout to a file on your command line if you like.

Similar Messages

  • Where do my stdout and stderr go?

    I've installed the iPlanet Webserver 6.0SP1 for Solaris.
    I would like to know how could I have the stderr and stdout redirected to log files, in order to be able to see JSP's and servlet's System.out.print() and System.err.print() messages. Now it looks like those messages are completely "lost"... Is it like this?
    Thanks a lot for your help.
    Marco.

    You have to redirect the stdout and stderr when you start the server. So if you normally type
    start
    instead you should type
    start > iPlanet.out
    to put the stdout into the file iPlanet.out
    The syntax for redirecting stderr varies depending on
    what shell you are executing the command in.

  • Stdout and stderr log files

    hello everyone,
    I recently used Oracle SOA Suite 10g to deploy my WAR file in it, i found the log file which contains the stdout and stderr in "ORA_HOME\opmn\logs\default_group~home~default_group~1.log".
    My question is: How can I view this log file through the Application Server Control?

    Hi Hussam,
    received your screen shot and it just misses the vital pieces, the content above the blue line. On the upper right left you will find four links called Setup, Logs, Help, Logout. Logs might be greyed out and not working. To make this working click on the name of type Application Server (J2EE.wbt in your case). This will open a page for the Application Server. Logs should be a normal link now.
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Redirecting stdout and stderr when starting a MS with the NM

    We are looking at using the Node Manager for stopping and starting the managed servers in some of our projects, to give the testers/developers the ability with operator role in the WLS console to save them calling someone.
    The only trouble is, with our existing shell start scripts we redirect shell level stdout and stderr to a file, i.e
    nohup ./startManagedWebLogic.sh test1-ms11 >> $OUTFILE 2>&1 &
    But how do you do the same when starting the same managed server using the node manager and the WLS Admin Console??
    There is the argument "-Dweblogic.log.RedirectStdoutToServerLogEnabled=true", but this only redirects on the JVM level.
    Is there a way around this problem to get the node manager outputing the same as our scripts do.
    Any direction would be great.
    Alistair.

    Gene
    Thanks for the replies and additional information.
    I was almost sure that one of the previously suggested troubleshooting steps would solve the problem but unfortunately that was not the case.
    So, let us look at the following factors....
    1. Delete the Adobe Premiere Elements Prefs file and, if that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    12.0
    and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
    2. Try to open the Premiere Elements 12 Editor from its Adobe Premiere Elements.exe file rather than desktop icon which uses Adobe Premiere Elements 12.exe file.
    Local Disk C
    Program Files
    Adobe Premiere Elements 12
    and in the Adobe Premiere Elements 12 Folder is the Adobe Premiere Elements.exe file that you double click to open the Premiere Elements 12 Editor bypassing the Welcome Screen. If necessary, we could create a desktop shortcut for the Adobe Premiere Elements.exe file for future use to open the program.
    Also, look at the necessity to right click the desktop icon for the program and the .exe files and apply Run As Administrator to each even if you are running the program from a User Account with Administrative Privileges.
    3. Consider creating a new User Account with Administrative Privileges and install and running Premiere Elements 12 in it (I would save this consideration for the last.)
    Please review. We will be watching for the results.
    Thank you.
    ATR

  • How can i change the title and image of  published exe

    Hi ,
    I have published a fla file in exe format .
    how can i change the title and image of this exe? do I ve to
    use some of the available softwares in the market? cant i do the
    customised setting in the flash player itself?

    On Fri, 4 Apr 2008 06:21:15 +0000 (UTC), "mFlexDev"
    <[email protected]> wrote:
    > I have published a fla file in exe format .
    > how can i change the title and image of this exe?
    I beleave the easiest way is to use PEResourceExplorer,
    Resource
    Hacker or similar software to modify EXE resources, such as
    window
    title and window icon.

  • Capturing Stdout and Stderr of Process before it finishes

    Dear all,
    I have to run a very long external task from java. This external program prints several messages while running. I am able to get these messages (and print them) with process.getInputStream. The problem is that I can only print those messages after the external program ends. Please, could anyone guide me on how to print those messages at the time they are printed by the external program?
    Thank you very much,
    Federico
    PS: I am implementing all these using the SwingWorker class. It works properly except for the above mentioned problem.

    I have modified my code according to the example shown below and now it works properly.
    The problem was that I was using:
    StreamGobbler errorGobbler = new StreamGobbler(proc.getErrorStream(), "MrBayesErr", System.err);StreamGobbler class is like the one in: http://www.velocityreviews.com/forums/t144656-runtimeexec-redirection-help-needed-mysql.html
    I do not understand why that did not work. However, with the modifications shown below now it works.
    Thank you,
    Federico
    import java.io.BufferedReader;
    import java.io.InputStreamReader;
    public class MainClass {
      public static void main(String[] args) throws Exception{
        Runtime r = Runtime.getRuntime();
        String[] nargs = { "sh", "-c", "for i in 1 2 3; do echo $i; done" };
        Process p = r.exec(nargs);
        BufferedReader is = new BufferedReader(new InputStreamReader(p.getInputStream()));
        String line;
        while ((line = is.readLine()) != null)
          System.out.println(line);
    }

  • Redirecting stdout and stderr to GUI

    Hello,
    Is it possible to redirect System.out and System.err output to a JTextArea or a JLabel? This output will be coming from another class that is instantiated from within my GUI class.
    Any suggestions or otherwise would be appreciated,
    Thanks.

    you need to define a PrintStream for it.
    suggest you write a class extending OutputStream and in the flush() method include the writing to the text area.
    MyOutStream outStream = new MyOutStream();
    PrintStream ps = new PrintStream(outStream.getOutStream(), true);
    System.setErr(myPrintStream);
    System.setOut(myPrintStream);
    can get messy mind you.
    hope this points you in some useful direction.
    Takis

  • Javaw.exe has encountered a problem and needs to close.

    I started getting this error a couple of days ago when I installed Open Office. Problem is that it happens with any java applications, not just Open Office. I have tried removing Java completely and then re-installing but so far have had no luck. I have tried JRE 6u19 and JRE 6u20 both with the same result.
    I ran RegSeeker to see if cleaning the registry would make a difference but it did not.
    I am running Windows XP.
    Is there a way to get more information on this problem or any known solutions?
    Thanks,

    Were you seeing this problem with 6u20 before installing OpenOffice?
    - I was not seeing this problem before installing OpenOffice. Though I don't know what version of Java I was using at the time.
    Which version number of OpenOffice was installed?
    - OpenOffice 3.2.0
    Are you seeing this from the command line?
    - Haven't tried command line. This is the standard Windows error including the options to send an error report.
    Is javaw.exe in your path?
    - Path=C:\Program Files\PHP\;C:\Program Files\Windows Resource Kits\Tools\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\Ahead\Lib\;C:\Program Files\Common Files\Ahead\Lib\;C:\Program Files\Common Files\Ahead\Lib\
    - So it would appear no.
    Which javaw.exe is being used?
    - I don't know. How can I find out?
    If you run your app from C:\"Program Files"\Java\jre6\bin\javaw.exe do you see the error?
    - Some confusion here perhaps. I am not trying to run an app that I wrote. I am trying to run anything that uses Java. So for example if I go to Control Panel/Java, it throws the error before opening up the Java settings interface. I am not really clear how I would try to do that through the console.
    - Simply running javaw.exe from the command line does nothing. No errors or anything. However without any parameters to pass into it that probably shouldn't be a surprise.
    - Oddly enough OpenOffice which supposedly uses Java does not throw any errors.
    What are your registry entries after the 6u20 uninstall in:
    HKEY_LOCAL_MACHINE\Software\JavaSoft\
    - Here they are:
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft]
    "InstallerVersion"="1.6.0_17-b70"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Auto Update]
    "AUVersion"="2.0.2.1"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in]
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\1.6.0_20]
    "JavaHome"="C:\\Program Files\\Java\\jre6"
    "UseJava2IExplorer"=dword:00000001
    "UseNewJavaPlugin"=dword:00000001
    "HideSystemTrayIcon"=dword:00000000
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment]
    "sponsorsoffered"="SP4;"
    "Java6FamilyVersion"="1.6.0_20"
    "CurrentVersion"="1.6"
    "BrowserJavaVersion"="1.6.0_20"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.6]
    "JavaHome"="C:\\Program Files\\Java\\jre6"
    "RuntimeLib"="C:\\Program Files\\Java\\jre6\\bin\\client\\jvm.dll"
    "MicroVersion"="0"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.6.0_20]
    "JavaHome"="C:\\Program Files\\Java\\jre6"
    "MicroVersion"="0"
    "RuntimeLib"="C:\\Program Files\\Java\\jre6\\bin\\client\\jvm.dll"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.6.0_20\MSI]
    "JU"="1"
    "OEMUPDATE"=""
    "MODE"="C"
    "JQS"=""
    "FROMVERSION"="NA"
    "KERNEL"=""
    "PRODUCTVERSION"="6.0.200"
    "INSTALLDIR"="C:\\Program Files\\Java\\jre6\\"
    "SYSTRAY"="1"
    "EULA"="0"
    "IEXPLORER"="1"
    "MOZILLA"="1"
    "JAVAUPDATE"="1"
    "AUTOUPDATECHECK"="1"
    "AUTOUPDATEDELAY"=""
    "ImageCkSum"="3505863356"
    "FullVersion"="1.6.0_20-b02"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update]
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy]
    "Country"="CA"
    "PostStatusUrl"="https://sjremetrics.java.com/b/ss//6"
    "EnableJavaUpdate"=dword:00000001
    "NotifyDownload"=dword:00000001
    "UpdateSchedule"=dword:00000000
    "Frequency"=dword:01170000
    "UpdateMin"=dword:00000016
    "ScheduleId"="S-1-5"
    "NotifyInstall"=dword:00000000
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start]
    "CurrentVersion"="1.6.0_20"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1]
    "Home"="C:\\Program Files\\Java\\jre6\\bin"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_02]
    "Home"="C:\\Program Files\\Java\\jre6\\bin"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_03]
    "Home"="C:\\Program Files\\Java\\jre6\\bin"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_04]
    "Home"="C:\\Program Files\\Java\\jre6\\bin"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2]
    "Home"="C:\\Program Files\\Java\\jre6\\bin"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2.0_01]
    "Home"="C:\\Program Files\\Java\\jre6\\bin"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.6.0_20]
    "Home"="C:\\Program Files\\Java\\jre6\\bin"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Prefs]
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Prefs\/Logitech]
    "/Default/Language"=""
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Prefs\/Privilege]
    "/Has/Privilege"="1301719357"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Prefs\com]
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Prefs\com\logitech]
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Prefs\com\logitech\harmony]
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Prefs\com\logitech\harmony\common]
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Prefs\com\logitech\harmony\common\preferences]
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Prefs\logitech]
    "/Default/Language"="en"

  • What's the difference between the java and javaw?

    As the title
    Thanks

    If you start java code with java.exe, closing the DOS command line window will close the Java application. If you start it with javaw.exe, it will not, but with javaw.exe you have no standard out, meaning printing with System.out.println() will not show up anywhere, because the JVM discards the standard out. If you start a Java application from within Windows directly (Using Start -> Run for example), starting it with java.exe will open a DOS box for the application, starting it with javaw.exe will open no DOS box at all (it will start like a Windows application). As should be clear now, it makes only sense to start Java applications with javaw.exe that have a GUI (graphical user interface), as otehrwise they won't be able to communicate with the user.

  • FlexBuilder error - javaw.exe - No Disk - help!

    Hi I havejust installed Adobe Flex 3.0 - downloaded the trial version from Abobe.com.
    I have just build a small application, and whenver I try to turn it I get the following error:
    "javaw.exe - No Disk: "There is no disk in the drive. Please insert a disk into drive E:."
    I have java installed on my PC - the java runtime which includes javaw.exe.
    It seems that Flex cannot find it?
    All help appreaciated.
    Thanks
    Mike

    Hi Mike,
    I've come across this....
    Seems to be related to any mass storage devices you have attached to your machine, especially things like x-into-1 card readers etc. but heard reports of external hard drives as well.
    Try removing any external hard drives, and disable all card readers and restart FB and try that. Once you have it up and running, you can usually add the devices back again.
    Cheers
    Ian

  • TopLink workbench won't run (can't find "~1\bin\javaw.exe" error)

    Hello,
    I'm having a tough time getting the TopLink WorkBench to run on Windows XP. I'm trying to run TopLink WorkBench 10g Release 3 (10.1.3.0.0) Build 060118. I've also installed Oracle Application Server 10g Release 3 (10.1.3.0.0) which is working fine (other than the Toplink part). I've managed to get EJB's deployed and access them through RMI and WS.
    When I run "workbench.cmd" I get the error
    Windows cannot find `~1\bin\javaw.exe"
    If I manually remove the setenv.cmd call and cutout all the fixpath bits, Toplink Workbench comes up fine (as far as I can tell), but I cannot connect to my Oracle databases. When I try to connect, I get "The class oracle.jdbc.OracleDriver was not found".
    I've been told this is because my J2EE 1.5 environment is incompatible with standalone Toplink Workbench. Is this true? I have both J2EE 1.5 SDK installed as well as J2EE 1.4 SDK but not amount of rearranging the system CLASSPATH seems to make everything work. (I've restarted Workbench to make sure the new env vars take effect when I change them)
    Is there a step by step document on getting this to work?
    Thanks in advance,
    James Ewell
    Seismic Micro technology
    Houston, TX
    PS - I am running WinXP 64-bit if that matters. The specific java bits are
    W:\>java -version
    java version "1.5.0_05"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_05-b05)
    Java HotSpot(TM) Client VM (build 1.5.0_05-b05, mixed mode)

    I was referred to this "step by step" link
    http://download-west.oracle.com/docs/cd/B25221_04/web.1013/b13593/mw002.htm#CJADJEEE
    which helps (it walks through the required edits in setenv.cmd). I still have the "can't find ~\bin\javaw.exe" problem though.
    Perhaps this is a JRE 1.5 issue or a WinXP (64-bit) issue.
    James Ewell

  • What's the difference between Javaw.exe and Jrew.exe

    Hi java community,
    When I configure the JRUN to use Java executable as
    JRE/Bin/jrew.exe it doesnt work...
    But If I use Javaw.exe it works
    Can anybody explain the reason for that?
    Thanx
    (Murali)

    It's dirrerent

  • How to make jar files run using java.exe and not javaw.exe

    Hi ,
    I am developing a project in which there is an GUI which inturn will call a console . I have made it into an jar file now.
    Here comes the problem. When i run the jar files , i don't get a console. While going through this forum, i came to know that jar runs using javaw.exe and this stops it from bring the console up.
    Please suggest me a way of running the jar file through java.exe or any other method by which i can get an new console poping up.
    PS : i cannot start the application itself in a system console , because the Console mode is an added feature and it is not to be displayed every time but only when the user intends to.

    Thanks for the reply pbrockway2. But i think, i was not able to convey my problem properly.
    I am supposed to start my application in a GUI mode ( No console are should be present at this point of time). Within the GUI , i have a option for working in the console ( i.e if console is choosen, then i start giving my output and take inputs from the console. I am trying to do this by just calling the "System.out "and "System.in" methods. )
    Here is the problem. As i have started it through " jar " it would not have a associated console with it.
    PS: i cannot have launching .bat file because that would result in my application having a console displayed at the very start of the application. I want the console to be displayed only when the user wants to start in console mode.
    Please suggest me some ways of doing this. Can i create a console from my java program and then exit it.

  • Error running javaws.exe  "The directory name is invalid"

    I am attempting to run a VPN client for Sabre. Once I installed their VPN client (installing JRE 1.5 + their custom icon) I am unable to successfully launch the VPN using the desktop icon as a power user in an active directory network environment, however as an admin it works fine.
    C:\Program Files\java\jre1.5.0_11\bin\javaws.exe "The Directory name is Invalid" <----Error message I get when I launch VPN.
    This is what the target location says - "C:\Program Files\Java\jre1.5.0_11\bin\javaws.exe" http://sabrevpn.sabre.com/vpnclient/sslvpn-tn.jnlp
    Now I have enabled access for our limited users by adding their group with modify access to the c:\program files\java folder and still I get this error. Any idea what this could be?!
    Thanks in advance.

    Hi,
    Thanks for your question.
    Can you access other websites?
    Did you use TMG 2010 and install SP1 on it? Did you configure HTTPS inspection?
    If yes, it may because TMG 2010 SP1 sends an empty client certificate to the web server during the initial Secure Sockets Layer handshake and
    you can refer to the KB below:
    http://support.microsoft.com/kb/2423401/en-us
    In addition, did you mean that the issue went away after you start Windows Firewall service? In general, Windows Firewall must be enabled on the computer where TMG operates. I am not sure if it is due to the Windows Firewall is not working.
    You can also check if Windows Firewall is enabled when you receive that error.
    Best regards,
    Susie

  • Please let me know if Java.exe and Javaw.exe is embedded in Oracle.

    What versions of Java.exe or Javaw.exe is embedded in Oracle. If java executables are embedded, then please inform what versions of Oracle have Java executables embedded.

    >
    What versions of Java.exe or Javaw.exe is embedded in Oracle. If java executables are embedded, then please inform what versions of Oracle have Java executables embedded.
    >
    Oracle 11.1+ includes AND REQUIRES Java 1.5.
    Oracle 11g requires version 1.5 and you CANNOT update the version. Any attempt to do so can possibly corrupt your Oracle version and will prevent Oracle from working properly.
    Note that also means you cannot load Java source or class files into Oracle that use functionality from Java 1.6+.
    See the Java Developer's Guide
    http://docs.oracle.com/cd/E11882_01/java.112/e10588/chone.htm
    >
    Feature List of Oracle JVM
    Table 1-1 lists the features of Oracle JVM and the versions in which they were first supported.
    Table 1-1 Feature List of Oracle JVM
    Feature Supported Since Oracle JVM Release
    JDK 1.5 support
    11.1

Maybe you are looking for

  • Problem with CS5.5 installation on Windows 7

    Hello, I have problem to reinstall CS5_5 on windows Seven I download the source and uncompress on CS5.5\DesignStandard_CS5_5_LS4\Adobe CS5_5 I start the Setup.exe and, after enter serial number and start installation I have exit code 7 Exit Code: 7 -

  • How can i generate a large SCN for database

    Hi, On databases where SCN number is larger that 2^32 , my application seems to work in a weird way. Am trying to get this re produced in my test setup , but am unable to pump up the SCN number to such a large value. I am trying this on RHEL5-64 bit

  • Blocking of a cost center in the creation of a Purchase Order

    Hi All, Some cost centesr are obsolete and mustn't be used in the creation of a Purchase Requisition (or Purchase Order). Block Could anyone suggest me how to do it? Thanks a lot G.

  • Problem with mapping [Idoc to EDI]

    Hi experts, i am facing a new problem in my mapping (idoc to edi scenario) my target is as follow: InvoiceDME >Invoice 1..1 >>InvoiceHeader 1..1 >>>IncotermsCode 1..1 My Idoc is as follow: IDOC >E1EDK17 0..20 >>QUALF >>LKOND >>LKTEXT There can be 2 s

  • Stopping the Ken Burns Effect

    I'm making a slideshow in Iphoto 11 and every time I add a picture it automatically adds the Ken Burns effect. Is there anyway to make this not happen without having to change the settings in each individual picture? Thanks