There are no movies on your apple tv... in the middle of streaming?

I have my Apple TV connected to my mac mini via ethernet. Lately, I've been streaming a movie, and right in the middle of the movie the screen comes up that says "there are no movies on your apple tv."
How is this possible? I was just watching one!
If I menu back and go to the movie list, they're all there and I can resume the movie exactly where I left off... until it happens again.
Any ideas?

As I said it sounds as though there is some interruption of network connectivity, Appletv rightly then complains there's nothing on AppleTv but there's also nothing available to stream- for whatever reason this then corrects itself.
Sorry, I can't offer you a solution but that's my take on what's happening - for some reason the iTunes>AppleTv connection is lost breifly.

Similar Messages

  • I have Lion and iCloud.  There are two very annoying problems.  mFirst, in the middle of writing or research the window gets yanked to the right.  Sometimes it can be retrieved and sometimes it can't.  sec on, in the course of research on Safari, or work

    I have recently upgraded to Lion and iCloud.  There are two very annoying quirks that i don't know how to fix:
    1-When working with word, documents or emails in the middle of a sequence the picture or window suddenly is yanked off the screen to the right.  More often than not it can't be retrieved.  This happens often
    2-In the same mode as in #1 above the print size will suddenly increase maybe by a factor of 3x or 4x.  it happens spontaneously.
    3-There are many other problems with the upgrade:
         -With sequence emails the secondary emails are not printed.  When one tries to open those emails it often fails.
         -The new address book format is crap.  it is very difficult to go from single listings to group listings and back.
    It's obviousto me the Apple software designers are not users.
    So how can i fix #1 & 2 above.

    > When working with word, documents or emails in the middle of a sequence
    > the picture or window suddenly is yanked off the screen to the right.
    Microsoft Word?  What version and service pack?
    Microsoft Office 2011 SP2 includes Word version 14.2.2.  Some Office 2011 updates addressed problems with Lion.

  • HT5706 Is there a way around updating your Apple TV without the micro usb cable?

    The light is just blinking at me and the tv shows a picture that I must need to connect to itunes.

    Unfortunately, in that case, you will need the micro USB cable.

  • Although Firefox is used by P-02E of DoCoMo, there are too many web pages which crash in the middle of drawing.

    Although Firefox is used by P-02E of DoCoMo, many problems are troubled recently.
    If it is going to see specific URL, it will force to terminate certainly.
    (Example)
    The logo of Yahoo Japan (and all other graphics file)
    http://k.yimg.jp/images/top/sp2/cmn/logo-ns-131205.png
    Support page
    https://support.mozilla.org/ja/home
    In addition to this, many web pages.

    Thank you for your reply.
    I paste clipboard of "about:support" below.
    "application": {
    "name": "Fennec",
    "version": "30.0",
    "userAgent": "Mozilla/5.0 (Android; Mobile; rv:30.0) Gecko/30.0 Firefox/30.0",
    "supportURL": "http://support.mozilla.org/1/mobile/30.0/Android/ja/"
    "crashes": {
    "submitted": [],
    "pending": 0
    "modifiedPreferences": {
    "browser.cache.disk.capacity": 204800,
    "browser.cache.disk.smart_size.first_run": false,
    "browser.cache.disk.smart_size.use_old_max": false,
    "browser.search.suggest.enabled": true,
    "browser.startup.homepage_override.mstone": "30.0",
    "extensions.lastAppVersion": "30.0",
    "network.cookie.prefsMigrated": true,
    "storage.vacuum.last.index": 0
    "graphics": {
    "numTotalWindows": 1,
    "numAcceleratedWindows": 1,
    "windowLayerManagerType": "OpenGL",
    "windowLayerManagerRemote": true,
    "adapterDescription": "Model: P-02E, Product: P_02E, Manufacturer: PANASONIC, Hardware: pana3_2, OpenGL: Qualcomm -- Adreno (TM) 320 -- OpenGL ES 2.0 [email protected] AU@ (CL@)",
    "adapterVendorID": "Qualcomm",
    "adapterDeviceID": "Adreno (TM) 320",
    "adapterRAM": "",
    "adapterDrivers": "",
    "driverVersion": "OpenGL ES 2.0 [email protected] AU@ (CL@)",
    "driverDate": "",
    "webglRenderer": "Qualcomm -- Adreno (TM) 320",
    "info": {
    "AzureCanvasBackend": "skia",
    "AzureSkiaAccelerated": 1,
    "AzureFallbackCanvasBackend": "none",
    "AzureContentBackend": "cairo"
    "javaScript": {
    "incrementalGCEnabled": true
    "accessibility": {
    "isActive": false,
    "forceDisabled": 0
    "libraryVersions": {
    "NSPR": {
    "minVersion": "4.10.6",
    "version": "4.10.6"
    "NSS": {
    "minVersion": "3.16 Basic ECC",
    "version": "3.16 Basic ECC"
    "NSSUTIL": {
    "minVersion": "3.16",
    "version": "3.16"
    "NSSSSL": {
    "minVersion": "3.16 Basic ECC",
    "version": "3.16 Basic ECC"
    "NSSSMIME": {
    "minVersion": "3.16 Basic ECC",
    "version": "3.16 Basic ECC"
    "userJS": {
    "exists": false
    "extensions": []
    }

  • "there is a problem with your apple tv ethernet networking" but I am connecting wirelessly

    So basically I can happily see all my movies etc on my TV via Apple TV but they appear to play but with no image. Sound is OK! Then the ATV decides something is wrong, reboots and says "there is a problem with your apple tv ethernet networking" but I am trying to connect over wifi.
    I have original ATV
    Thanks in advance
    Daniel

    You may have some software corruption or the unit may well be starting to fail.
    Hold menu and down arrow for 6 secs to reboot the unit to the diagnostics/service menu from where you can reinstall the original shipping software (some have had issues updating beyond version 1.0 if that's what's on it) but first I'd try to run the diagnostics utility though it often passes this even if there are issues.
    Always worth unpowering the AppleTV and letting it rest for a few minutes before restarting - this can sometimes reset thing that a powered reboot won't.

  • I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

    I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

    Generally, it's ok to install on two machines as long as they are both yours and you only use one version at a time.
    BTW, this is the forum for Adobe Contribute.

  • I have and apple tv,,..how do i play movies,from my apple mac,onto the apple tv..my movies are not on my itunes,but on an external hard drive...i just want to mirrow whats playing,on my mac to the tv...

    I have and apple tv,,..how do i play movies,from my apple mac,onto the apple tv..my movies are not on my itunes,but on an external hard drive...i just want to mirrow whats playing,on my mac to the tv...

    Are the movies in the correct format:
    Video formats
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Audio formats supported
    HE-AAC (V1), AAC (16 to 320 Kbps), protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV; Dolby Digital 5.1 surround sound pass-through
    When you say tit only sees your music folder, are you saying it only sees your music folder or does it see other empty folders.

  • How do you keep your purchased apps if you are forced to change your Apple ID?

    How do you keep your purchased apps if you are forced to change your Apple ID? A good example is if you are forced to change your email, which you use as your Apple ID.  what if it is a security app and you lose a lot of data if you lose the app? Why are the apps tied to the Apple ID rather than the user? Why is it impossible to globally change the Apple I D?

    All content is tied to the account, but you can change the primary email address on an account e.g. you can log into your account via the Store > View Account on your computer's iTunes and there should be an Edit button to the right of your account id on your account's page, or similarly on your iPad try tapping on your id in Settings > iTunes & App Store and view your account. Or you can update it by logging into it via this page http://appleid.apple.com . You shouldn't lose any content on the account if you update it.
    After updating the account you may need to log out of your iPad by tapping on your id in Settings > iTunes & App Store and then log back in with the updated version for it to be 'refreshed' on it

  • The movies from my Iphone 5 are not coming across on Apple TV. The little spinning beach ball appears like it is thinking.  It use to work but quick working a month ago.

    The movies from my Iphone 5 are not coming across on Apple TV. The little spinning beach ball appears like it is thinking.  It use to work fine but quick working a month ago. I mirror from my phone to the Apple TV.  Still images and everything I do on the phone is mirrored on to the TV except when I want to show a YouTube video or any video and then the screen on the phone and the TV screen go black and the spinning beach ball appears.  The videos open right up on the phone if I do not have mirroring on and going through the Apple TV.  I just downloaded the latest update to the phone it did not fix the problem.  Please help.  Thanks, Elvis G

    Hello Elvis G,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps concerning device issues. You may want to consider a reset, then testing to see if the issue is resolved:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    How to reset
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Image Capture says iPhone has 0 items to import, but there are 4 movies

    I took four movies last night, and when I came home and plugged in my iPhone, iPhoto said there are 0 items. When I disconnected the iPhone, I noticed iPhoto did not notice -- it still said there are 0 items in my iPhone. I expected the iPhone icon to go away when I unplugged the phone. So I right clicked on the icon in iphoto and ejected it. Then plugged the phone back in. Now it does not show up at all. So I went to Image Capture. Image Capture sees the phone, but still thinks there are 0 movies.
    I think I solved this by restarting the computer last time, but I want to stop having to do that. Is there a file or something somewhere I can delete that is corrupt? I tried deleting the iPhoto cache.
    I also notice that although I told ImageCapture to open iPhoto when camera is inserted, it does not. ***? I guess I'll restart my computer, but what a PITA.

    Sure enough, after reboot, there are my movies in iPhoto ready to import. But of course, having to reboot to see my photos is very tedious. What is going on, Apple? It's not iPhoto prefs, it's not iPhoto cache, it's not ImageCapture prefs. ***?

  • Windows 2003: there are no pictures on your camera

    Initially, the iPhone did not show up, and the scanner and camera wizard did not function. I started the windows image acquisition service, and now the iphone shows up, but with the message
    "there are no pictures on your camera" in the camera and scanner wizard, and the "Apple iPhone" directory is empty.
    It's not the phone, because the files show up on a different computer.

    In the iphone windows requirements, the iphone needs windows xp or vista.

  • I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

    I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
    The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
    * You have used the proper case; requests ARE case-sensitive!
    * You have entered the URL correctly. (i.e. proper directory/filename)
    * You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
    * You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
    * The user/file still exists on this server.
    I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
    == URL of affected sites ==
    http://facebook.com; buscagoogle.com

    I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

  • There are no notifications for your produce

    Hi
    I have now  Lap VIEW 2013 and I tried to dowload LabVIEW Control Design and Simulation Module after following the process a message shows that "There are no notifications for your products". Even if I have closed window firewall and setted the files enables to install in my computer. I still was able to get this function in my labview.
    Do you guys have this experience and solution?
    Thanks a lot

    Tullip wrote:
    Hi
    I have now  Lap VIEW 2013 and I tried to dowload LabVIEW Control Design and Simulation Module after following the process a message shows that "There are no notifications for your products". Even if I have closed window firewall and setted the files enables to install in my computer. I still was able to get this function in my labview.
    Do you guys have this experience and solution?
    Thanks a lot
    Hi, your wording isn't quite clear to me.  Does everything actually work?  The "No notifications..." message is simply telling you that your stuff is up to date. 
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • We are unable to activate your Apple Developer Program membership.

    I already pay Developer Program and after two days I receive this email:
    Apple Developer Program Activation Code
    Dear emilia h figueiredo/Fagmer feitosa,
    To complete your purchase and access your Apple Developer Program benefits, please click on the activation code below.
    Activation Code 
    Part Number
    iOS Developer Program
    XXX-XXX-XXX-XXXX
    XXXXX/A
    If you need further assistance, please contact us.
    Best regards,
    Apple Developer Program Support
    My program dont is a Company, but solo developer. "Emilia h figueiredo" is my wife, and I paid with CC it.
    This is a problem? Pay with my wife CC ?
    When I click at Activation Code and put my password, I got this message:
    We are unable to activate your Apple Developer Program membership.
    We have received your purchase information and will email you shortly to verify additional details.

    Same problem! What should I do?

  • We are unable to activate your Apple Developer Program

    Hi guys, I tried to enroll in the iPhone Developer program, but I got this message when trying to activate it via the link in my email.
    We are unable to activate your Apple Developer Program membership because we are unable to successfully verify your identity. Please contact us and reference Enrollment ID# ******** for further assistance.
    Apparently according to the member centre "Your credit card and enrollment information do not match."
    This doesn't make much sense to me as the only difference is that my name on the credit card is all in caps, while my enrolment name isn't!
    Any ideas?
    Thanks,
    Mike

    Apple tells us this can take up to 24 hours, and if longer, contact them:
    http://developer.apple.com/support/ios/purchase-and-next-steps.html#purchasecomp lete
    Tech support contact form for developers: http://developer.apple.com/contact/
    Apple personnel do NOT take an active part in this forum. You need to go to the official forum for your developer program, such as iOS: https://devforums.apple.com/community/iphone?view=overview, which you may not be able to access, however.

Maybe you are looking for

  • Error when trying to running application

    Hi, I am completley new to SAP netweaver so please forgive my ignorance. First I installed SAP Composotion Environment and SAP Netweaver 7.1 both on XP Professional (Service Pack 2). They both installed succesfully. I then created a sample EJB applic

  • How to capture the string values

    Hi Gurus, Could you plz suggest me how to capture the string value. My requirement is. I have a structure field called  cnj_stat-sttxt_int and it is storing a value like "REL CDRT AVAC". AND the moddile value CDRT will change according to condtions.

  • How to get the cursor position in the text edit box?

    Hi, all. I want to get the cursor position in the text edit box to insert some data. But I don't know how to get. Can someone give me some advice? BestRegard. Miya.

  • Hi, my iPhone 4S and another one within my family are not synchronizing correctly the adressbook.

    Hi out there, could anybody give me a hint please? Since one week our both iPhones 4S are not getting the changings in the adressbook on our iMAC. Even replacing the complete contacts on the phones does not help. A call to apple support just confirme

  • Set minimum size of JScrolPane's knob

    Hi All, Please suggest me a way to set a minimum size of JScrolPane's knob. It becomes very small when the numbers of items in the list are so much and that time knob is very small. that makes scrolling difficult to the user. So i want to set a minim