There are validation errors on yhis page, click close.....

Hi all,
i am new in SQL server configuration,
i am getting this error when i attempt to configure SQL server 2008 R2, on the server configuration tab,i put a valid account name and password on both service "SQL server agent and SQL server database engine" it displays this error " the
are validation errors on this page, click ok to close the dialogue box...." how can i resolve this error>
thanks

Hello,
Could you confirm the password is strong? Could you just change the password for the word p@ssw0rd, update SQL Server setup page with the new password, continue
setup, and after installation change the password back and update service account information using Configuration Manager?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

LOV selection fails when there are validation errors on the base page

Hi
I have lovs and some other required fields on a page . If there are any validation error on one of those text fields and if I open the LOV (not related to the text fields) and tries to select
an item from the LOV search results, it doesn't do it until unless I go back to the base page and correct all the validation errors on the text fields eventhough those text fields have nothing to do with the LOV.
Any suggestion is appreciated.
Thanks
Anwar

I am on Anwar's team, and I've been dealing with the same problem, although on a different page.
The JSPX for a contrived example is below. I can provide backing bean code, if needed.
The form contains two LOVs. Both fields are required. If you leave both fields blank and click Continue, you get a red box around both fields and error messages are displayed. If you then click the magnifying glass to select from the first LOV, the LOV pop-up is rendered. However, you cannot make a selection, either by double-clicking a line item or by clicking OK (the OK button has no effect). All you can do is cancel.
Interestingly, the act of clicking the magnifying glass on the first LOV gets rid of the red box around that field. So, once you cancel out, the second LOV actually does work. If there were more than two fields on the page, that wouldn't happen. The problem seems to be that the LOV doesn't work unless there are no validation errors on the page other than for the LOV which is being invoked.
As you can see, immediate="true" is set on both LOVs. The behavior is the same whether this is true or not.
I'm left thinking there must be something obvious that we're missing... but none of us can see it.
Thanks,
KEN
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
    <af:document title="Add Item">
      <af:form>
        <af:panelGroupLayout>
            <af:panelHeader text="Header">
                <af:panelFormLayout>
                    <af:inputListOfValues label="Id" searchDesc="Search" popupTitle="Supplier Id"
                                          simple="true" required="true" id="supplierId"
                                          model="#{viewScope.AddItemBackingBean.supplierIdListOfValuesModel}"
                                          value="#{viewScope.AddItemValuesBean.supplier.id}"
                                          autoSubmit="true" immediate="true"/>
                    <af:inputListOfValues label="Description" searchDesc="Search" popupTitle="Supplier Id"
                                          simple="true" required="true" id="supplierDescription"
                                          model="#{viewScope.AddItemBackingBean.supplierDescriptionListOfValuesModel}"
                                          value="#{viewScope.AddItemValuesBean.supplier.description}"
                                          autoSubmit="true" immediate="true"/>
                    <f:facet name="footer">
                        <af:panelGroupLayout layout="horizontal" halign="right" >
                          <af:commandButton text="Continue"
                                            actionListener="#{viewScope.AddItemBackingBean.continueAction}"
                                            id="continueButton" />
                        </af:panelGroupLayout>
                    </f:facet>
                </af:panelFormLayout>
            </af:panelHeader>
        </af:panelGroupLayout>
      </af:form>
    </af:document>
</f:view>
</jsp:root>

I am trying to create my own apple id, but when i try to click creat my id, i am redirected to the same page, there are no errors saying anything is wrong

i am trying to create my own apple id, but when i try to click creat my id, i am redirected to the same page, there are no errors saying anything is wrong

Here is a link that should meet your needs.
Rescue email address and how to reset Apple ID security questions
Let us know how you got on.

I had a book on my iPad 2 and now it says there is an error on the page and there are no words, although it still shows up on my iPhone fine

I had a book on my ipad 2 and all of a sudden it's saying there's an error on the page and all the pages are blank. It still shows up fine on my iphone. Any ideas how to get it back on my ipad without rebuying it?

As long as it is still available in the store then you can re-download it for free - you will need to delete it from iBooks on your iPad before you can try re-downloading it. You could also try copying it from your iPhone to your computer's iTunes via File > Transfer Purchases (assuming that it's not already on there), and then sync it to the iPad.

Error message: There was an error processing a page. There was a problem reading this document (110)

I opened a pdf document in Adobe Reader X. When I attempted to scroll through the pages the following error message appeared, “There was an error processing a page. There was a problem reading the document (110). After an Internet search to try to find the reason for the error and a solution, I came across a site that suggested it was an issue regarding the fonts of the document. I then reopened the document and went into the document’s font properties (FILE – PROPERTIES – FONTS tab). There I noticed that the “Gathering font information” stopped at 2% which, of course, I took to mean that Adobe Reader X was having a difficult time in loading the font’s information. Another site suggested opening the document in the pdf reader, Foxit. So I did, and the document loaded properly with no error messages. I was still curious as to why the document did not load entirely in Adobe Reader X and if the same problem would occur using a different reader. I then downloaded the pdf reader, Nitro Reader 2. I opened the same document and initially received the following message, “The requested page number is invalid and does not exist in this document.” I closed the message and proceeded to scroll through the document. As I scrolled, the following message appeared, “This file was damaged (corrupted) and has been repaired.” I thought, “Wonderful!” I then chose <FILE – SAVE AS – PDF DOCUMENT> and saved the “repaired” document under a new name. When I opened the “repaired” document with Adobe Reader X, behold, the document opened entirely with no error message. I was curious, so I went into the document’s font properties and noticed, this time around, that the “Gathering font information” loaded to 100%. Nitro Reader 2 detected the error and fixed it. Now I’m left to wonder…why wasn’t Adobe Reader X able to do the same? I hope this post helps others who are experiencing the same issue.

When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice.

Error Message: "There was an error processing a page. A file I/O error has occurred"

Hi
I am running Windows XP on a lab top for a while. Just recently, every time I opened PDF files, I was getting an empty page. So, I installed the latest Adobe Reader. After that I started getting the error message "There was an error processing a page. A file I/O error has occurred".
Does anybody have a solution to this?
Thanks in advance.

I found my problem. My down scale quits, but quits as in not showing it's working. (I was confused too). Most all files can not be seen until fully downloaded. For whatever reason, perhaps a glitch or the new modum or video card. When downloading do not interupt as in wanting to view a page, but go to Network and Sharing Center (bottom right hand corner - click the computer running symbol) and click View Status. See Activity. If the numbers are rolling you are recieving. Waiting until it is complete. This is madding, but I've learned to live with it.
Hopes this helps.....

There was an error processing a page. there was a problem reading this document (110)?

hi
my name is kapil and i am trying to open one (which is downloded) pdf document.which giving me an error as there was an error processing a page. there was a problem reading this document (110) for some page only. i am using acrobat reader x. is it any 3d setting or any thing else please give me an idea. i am waiting for replay as soon as possible...........
your sincerely
KAPIL TRIVEDI

When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice.

"There was an error processing a page. Out of memory." Adobe Acrobat 9 Pro-Please Help!

"There was an error processing a page. Out of memory." Adobe Acrobat 9 Pro I had this problem with my last computer over two years ago which was obviously an older version of windows and acrobat and had found a way to solve it but like I said it was an older version and was 2 years ago so I don’t remember how to fix it. I’ve looked through many forums and emptied my temp folder I’ve uninstalled and reinstalled the software I’ve turned off my anti-virus I don't have adobe reader because I know this causes comflicts also and have tried so much more and I’m still having issues with about half my pdf files I cannot figure it out. I use pdf files many times a day and this is really hindering my work so please please please if anyone else has experienced this or knows how to fix it that would be great thank you!!! I’m somewhat computer savvy but not completely so if you cloud please explain to me in slightly less tech terms that would be great too.

Assuming your disk is not too full, and your virtual memory settings are normal, this is not caused by software clashes, TEMP folders nor fixed by reinstalls. It is Acrobat _actually_ running out of memory, or running out of something else it has a fixed supply of.
1. Are you using any plug-ins to process files?
2. After you get this error on a particular file, restart Acrobat. Does the file now open OK?

Error message "There was an error processing the page.there was a problem reading this document(109)

Getting an error message when viewing the pdf report by using Adobe reader "There was an error processing the page.there was a problem reading this document(109)"

Hi,
We are using Active reports tool to generate the PDF document, And the
server is Windows 2003, and it is online document which generates
dynamically
We are facing the below error message when we try to generate, and my
local machine having Adobe Reader 7.0
Please find the screen shot below for the error message, Thank you for you
help in advance.
Thanks and Regards
Inayath Nalgar

Can anyone help me?Creating the shadow copies in the file server cluster ,there are some errors occured, OS version is WSS 2012

I construct a failover cluster(file server,AP module) for sharing files by WSS 2012,and I want to use the shadow copies to backup my data,but when making a shadow copies on the volume which is added to the cluster(not the CSV,just add
it to the cluster and use it to share files,it plays the role of file server),there are some errors occured, these errors result in the shadow copies failed,error likes the following pictures:
1: the disk F is added to the cluster,first I make the shadow copies by click the right key of mouse on the disk F,and chouse the configeration shadow copies,and click the settings, then click the schedule , and I wait just a few seconds, the error is appeared,like
this picture 1, the wait operation timed out,and then ,
I click the schedule button once again,a different error occured,like the following picture," the object already exists",if i don't set the schedule at first ,use the default shedule,and click the enable button also the same error must
accure
but the only diffrence is that, a shadow copy time point is created, also ,you can make the shadow copies by click " create now", that is creating the shadow copies manually. Although it can succesfully make the shadow copies, but when I select
a time point to revert, error occured, "A volume that contains operating system files or resides on a cluster shared disk cannot be reverted"
In a word,all the errors above make the shadow copies by schedulling failed,except making the shadow copies manually,but what makes me confused is that I have ever maked the shadow copies succesfully by schedul a policy,I don't know what makes it succesful,
it's small probability, most of time ,it's failed.No matter what kind of situation, revert must be failed.
I'm sorry for my pool english , it's the first time for me getting help in forum by english ,I don't know if I descripe my question clearly, also ,other method like the link
http://technet.microsoft.com/en-us/library/cc784118(v=ws.10).aspx I have tried,but the same errors occured.Can anyone tell me How can I make the shadow copies in File Server
cluster（AP module）？And I make a mistake in operating？ Looking forward for your reply.Thanks!

Hi,
Please check the following 2 places:
HKEY_LOCAL_MACHINE\Cluster\Tasks
C:\Windows\System32\Tasks
First please compare permission settings of the folder C:\Windows\System32\Tasks with a working computer. Correct permission settings if anything wrong. Specifically, confirm you current account do have permission on this folder.
As it said "object already exists", find the schedules you created before, backup and delete all these schedules in both registry key and folder.
Then test to create a new schedule to see if issue still exists.
Meanwhile what kind of storage device you are using? The issue could occur on specific storage device, so test to enable shadow copy on a local disk to see if that will work.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]
Thank you for you reply.On the local volume,all of these errors will not occur, but the volume in the file server cluser.There is no value in HKEY_LOCAL_MACHINE\Cluster\Tasks. On local volume, everything goes well about the shadow copy, so I do not
think something is wrong about the permission settings of the folder C:\Windows\System32\Tasks.Storage device is a SAN,we use RAID6 and provide the LUNs to the NAS engine, and the make the volume on these LUNs, Is Angthing wrong? Hope for you
reply~~

"There was an error processing a page. Invalid Function resource."

I've got a PDF file that I'm trying to split up its pages. The resulting page gives the error: "There was an error processing a page. Invalid Function resource." I've looked at each object, and other than the object #'s are different all the necessary objects exist. I'm not sure what I'm missing or what I've got wrong. I'll attach the original file and the resulting file that I create.
Any help would be appreciated.
Fubeca

It won't let me post my files...so I've put them here:
http://xmission.com/~handleys/temp/1.pdf
http://xmission.com/~handleys/temp/Original.pdf
Thanks.

Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open

Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open! Im very frustrated and anything would help! I have Windows 7 or Vista. Idk which

Hello Dr.Help,
Thank you for providing so much information about the issue you are experiencing with iTunes. It sounds like you have tried reinstalling it, but nothing happens when you launch it. I recommend following the steps in this article to resolve launch issues with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M.

On my iPad 2 I can nolonger view maps. It says there are JavaScript errors. How can I fix this problem?

On my iPad 2 I can nolonger view maps. It says there are JavaScript errors. How can I fix this problem?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Tried to reinstall iPhoto library from external hard drive, it shows that the photos and events are there but there are no thumbnails and if you click on an image or video nothing comes up.

My hard drive crashed recently and we took it to apple to get repaired. The apple employees said that they would have to replace the hard drive but they didn't have the equipment to get the data off my hard drive. So I took it to a computer store who had the right equipment after a month and a half of waiting they finally got all the data off my hard drive and put it on an external hard drive (Seagate Expansion Portable Drive). I then took it back to apple who replaced the hard drive. Now I'm in the process of reinstalling everything. I have never done a Time Machine back up or backed my laptop up to . Which I now will do very often once I've reinstalled everything. I have reinstalled all of my desktop images and folders as well as my iTunes library with no issues. However when i went to reinstall my iPhoto library it came up blank. I then Rebuilt the library several times and this was the result.
It shows that the photos and events are there but there are no thumbnails and if you click on an image or video nothing comes up.
Please help i have three years worth of images from holidays on here and would be devastated if i lost them.

iPhoto cannot find the thumbnails or the original pictures.
Go to your iPhoto Library in the Pictures Folder.
Right-click on it and from the resulting menu, choose 'Show Package Contents'.
This will bring you inside the iPhoto Library package. There you should see a Folder called Masters. Within that, there should be folder containing your actual photos.
Are they there?

There was an error processing a page. a number is out of range.

When I open a PDF generated from a classic ASP application, some particular documents fail when accessing a page: there was an error processing a page. a number is out of range.
This only happens in Adobe Reader 10 and 11.
The ASP page has a code similar to this:
Response.AddHeader "Content-disposition", "attachment; filename = doc.pdf"
Response.ContentType = "application / pdf"
Response.Write Session ("PDF")
Try adding different settings in the properties AddHeader / ContentType / CharSet etc, but always the same.
In the screenshot you can see the mistake in page 3
Any idea?
thank you very much

Sounds like the pdf is corrupt. Try a forced quit. (command option escape)

There are validation errors on yhis page, click close.....

Similar Messages

Maybe you are looking for