This site absolutely sucks. There is not enough space to ask the question and when I want to get to
Why dont you put the BODY part in the question section as well as the feedback section. in the question section the subject part is not even labelled.
Why should I have to jump over CIA like security hurdles just to ask a straight forward **bleep** question about a 9500 series laptop I just bought. AAAAAAAAAAAAAAAAAAAARRRRRRRRRRRRRGGGGGGGGGGH!!!!!!!!!!!!!!
I want to know how to install a new nvidia card in my Pavillion 9500 coz the existing one is causing red a blue flashes all over the screen and a driver update does not fix it.
IS THAT SO SENSITIVE A QUESTION???? REALLY???
Ross McNeilage Melbourne Australia.
ps GET YOUR ACT TOGETHER. Not everything is a matter of national security!!
Hi rosmcn,
The subject of the post is for a title that you can use to briefly describe what your problem is, and then you use the body to add as much detail as you can. In the body of the post, there is no space restriction, so you should have plenty of room to ask your question
There are no security measures that prevent you from posting because of length in the body, but if you are posting language blocked by the language filter, it won't let you post.
Please try asking your question in the Notebook Hardware forum, and let me know if you have any other issues.
Thanks,
SunshineF
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation
Similar Messages
-
My Lacie External backed up on Time Machine after the first back up but now says there's not enough room. I thought TM deleted old back ups to save new versions. What am I doing wrong. This happens to me constantly. Every single external hard drive I've purchased for the MacBook Pro (5 of them) has not worked either initially or at the second back up. It either isn't formatted properly so I have to go to Genius bar to help me set up for the first back up, or after the first back up, it says there's not enough space and I have to go back to Genius Bar. Is there a way I can fix this on my own?
I just purchased 2 external hardrives. a LaCie Minimus and a G Drive. Each 1 TB. The guy at Apple told me that would provide 2 good TM backups for me. My internal HD has 750 GB capacity, of which I'm using 700 GB. Perhaps the ratio is not great enough. I do wish they would have told me this before I purchased the two Bummmmer! I even had them format and get the first back-ups going because of issues I've had in the past. I also just bought a 750 GB for photos.
So, I won't be able to buy another bigger external since I've just purchased 3. Ugh. Well, I'll just exclude some files and divide things up. Eventually, I just want my 20,000 iphotos on one of the 1TB externals, and a TM back-up on another so that iphoto will function once more. It really hates how many photos I have and is brutally punishing me for it.I seriously need to do some housecleaning!
Thanks for the advice. Just moved from US to Australia last week and was hoping to upload a few photos and the domino effect has lead me to this. Just went to Genius Bar in Perth today and they told me how to reformat drive to transfer iphoto library over, but I got stuck at trying to back-up my TM. -
I have updated up my ipad2 which had the original version on it (4.??) to the latest version of IOS. Before I did this I backed up the ipad to my laptop so I wouldnt lose precious pics and videos of my baby boy. Now that the latest version is on the ipad it is now asking me if I want to start as a new ipad or restore my backup from itunes. So i select restore my backup from itunes and connect to itunes but it now says there is not enough space to do so. I have a feeling it is because there are alot of pics on our ipad which i presume are all in this backup, many of which we do not need on the ipad anymore but I have no idea on how I go about deleting these pics?? And how do I find where on my laptop this backup is and most importantly the video and pics of my baby boy.
Restoring an iPad from an iTunes-generated backup should not require an Apple ID password.
Did you encrypt the iPad backup? If so, then trying to restore will require entering the encryption password. -
There is not enough memory available on the Essbase Administration Server to open this outline
When I am trying to open outline it is showing the below error-
"There is not enough memory available on the Essbase Administration Server to open this outline"
Please advise what can be the reason and how can we solve them?
I checked the earlier post https://forums.oracle.com/message/4434719 and JVMOption is set with the current maximum size of the JVM e.g. -Xmx512m. Still we are receiving the error. Could you please help?Thanks John for the reply.
Couple of things
1) We use Block Storage Outline. Does it matter while compacting the outline using ESSCMDQ?
2) At the moment the JVM is set to -Xmx512m. Should we increase from 512 to 1024 or what is recommended.
We are doing ESSBASE 7.1.3 to 11.x (11.1.2.2) migration (AS IT IS migration) and we are facing this problem. Quite strange that we didn't get any memory error version 7.x whereas we are getting error in 11.x My understanding is that the current ESSBASE server has 6 GB RAM and in all ways it has higher capacity than server 7.x. But not sure why we are getting this strange error.
Is it possible to check the JVM size in ESSBASE 7.1.3 (or where we need to check the memory size).
Thanks in advance.
Satheesh. -
My family member's iPhone recently erased all of its contact information, with no action taken by my family member. She is trying to use the restore backup function to recover her contacts.
The restore backup functions says that there is not enough space on my iPhone to restore backup. How do I fix this/how do I know how much space I need to complete this backup?
We have removed the majority of pictures from her phone, and she has 4.1 GB of memory free.
Thank you!You need at least as much space as you have used on the iPod. Could be as much as 64 GB but is probably much less.
Find a way to delete what you do not need on the computer. Start by emptying the Recycle Bin.
This may be applicable: iOS: 'Not enough free space' alert when trying to sync -
I am trying, unsuccessfully, to export an iphoto smart album- 12,000 photos, no movies- (information is showing 31GB total) to a brand new 32GB scandisk flash stick. A caution msg keeps saying "there is not enough space to complete this" Help!
You need a larger drive or an external drive - they OS needs a minimum of 10GB just for normal operation so you are already experiancing degraded preformance - if yo do not get more space you will start losing data
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN -
False error message: there is not enough space on your .mac idisk...
I had four sites. I deleted one site and removed a ilnk to it from a remaining site. Now I get repeated errors publishing: "There is not enough space on your .mac idisk to publish your site" and urging me to buy more space. This message is incorrect as I have plenty of space left and anyway I want to remove things, not add. Please help me get published.
thanksHave you tried asking this question over in the .Mac forums? Or even better, have you sent an Email to the .Mac support people?
I've not experienced your issue with iWeb, so I can't really help out, however, I have seen the discussion about this problem several times in the discussions. You may want to try doing a search, if you haven't already, for this problem in the discussions and see if there is a fix. -
I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
DanI was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML. -
Supposedly there's not enough space
My iPod wont let me download apps because "there's not enough space" but there is
To download and install an app the iPod needs storage available equal to about three times the file download size.
If you sync from your iTunes library less storage available is required.
Does the app/iPod meet this? -
1.) How do I organized my photo album on my ipad?
2.) How do I remove an album on my ipad?
3.) i have taken over 1,000 photos on ipad, now it won't sync stuff to the ipad because it said there is not enough space. I want to delete some past synced photos from the computer to create space, but I don't know how to find it on computer. It sycned a portion of a file onto the ipad which is useless to me so I want to delete it all & start fresh.
4.) I was thinking about copying some of those photos over so it would show up as new data maybe then it would sync to my ipad as a new & competed album. Or will this create more problem because it would only be creating more photos?
5.) By the way, I don't know how to use dropbox or anything like it, so I take photos of some files & web screen that I use regularly to always have access regardless of internet access. That is why I have so many photos. But I want to be able to separate & organized them by files, web screens, or topics. I also want to be able to delete & update as needed.
6.) If needed I am willing to delete 4 G of downloaded app to create space. Will this help the space issue? Also could I just leave the downloaded app to my computer only & only sync to to ipad as needed, since I don't need app as regularly. I NEED "photo" ALL of the TIME! I am out in the field, instead of carrying stack & stack of papers, I carry ipad with photo of these daily needed papers!1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad -
I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine. -
The operation could not be completed because there is not enough space on the destination disk
I have 124Gig of space left on my HD, when I try to export my movie i get this error "The operation could not be completed because there is not enough space on the destination disk" I have read some of the threads went in and deleted the iMovie Preference file but no luck.. any Ideas? Thanks!
You need the System DVDs that originally came w/the computer in order to troubleshoot. All Macs prior to & including ML came w/System DVDs.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s. -
Having problem with i Pad sync getting pop up message as below. The i Pad cannot be synced because there is not enough space to hold all of the items in the iTunes library (additional 10.03 GB required). There is enough space be it in PC or on i Pad. Why and What can be done to resolve, please advice appreciate. Thanks
It generally means - just using random numbers for examples - the iTunes on your computer holds 45 gig of content, you have a 16 gig iPad which has 13 gig of free space and the content just won't fit.
Easy solutions. go into iTunes and 'manually manage' your content. I believe this is in the main summary tab for your device (connect your device, click on the icon in iTunes to access controls for your iPad
You may also need to choose to manually control content in both the music and movie tabs.
Apple - Support - Manuals
the manual will have more specific info for syncing and controlling content -
Write: 0xecf6eb0, 4096: There is not enough space on the disk.
Our applications occasionally get the error in the function specified by set_errcall: "[prefix] write: 0xecf6eb0, 4096: There is not enough space on the disk. " Preceded by "DB00.db: write failed for page"
There most certainly is enough space on disk for one. In this most recent case, the Db::put's succeeded for a full hour before finally failing with an out of space error. At which point, I now have 30 log files and my own log files are filled with Berkeley error callbacks.
How come the set_errcall doesn't return an integer error code? If it did, we would be able to analyze that and decide any action to take. In this example, I might consider closing down all handles and checkpointing then removing logs since maybe the number of logs has gotten to large. Analyzing a string doesn't make sense since that might change with Berkeley versions.
Anyway, can anyone give any advice as to why we would get an out of space error (with plenty of disk space.) And also how to handle such an error.
Edited by: AMARCIONEK on Jun 3, 2009 10:10 AMThe platform is C++ API version 4.7.25 running on Windows Server 2003 Enterprise SP2. The database is on an NTFS disk. We have tested database files up to 20GB in size. The following is my config.
m_pDbEnvironment->set_cachesize(0, 10 * 1024 * 1024, 1);
m_pDbEnvironment->set_lg_max(20000000);
m_pDbEnvironment->set_lg_bsize(10 * 1024 * 1024);
m_pDbEnvironment->set_mp_max_write(4, 0);
m_pDbEnvironment->set_mp_mmapsize(2 * 1024 * 1024);
m_pDbEnvironment->set_mp_max_openfd(1);
// set the alloc methods into the environment
m_pDbEnvironment->set_alloc(QPRT_ALLOC, QPRT_REALLOC, QPRT_FREE);
m_pDbEnvironment->set_lk_detect(DB_LOCK_YOUNGEST);
m_pDbEnvironment->set_timeout(500000, DB_SET_LOCK_TIMEOUT);
m_pDbEnvironment->set_timeout(200000, DB_SET_TXN_TIMEOUT);
m_pDbEnvironment->set_flags(DB_REGION_INIT, 1);
m_pDbEnvironment->set_tx_max(5000);
m_pDbEnvironment->set_flags(DB_TXN_WRITE_NOSYNC, 1);
m_pDbEnvironment->log_set_config(DB_LOG_ZERO, 1);
m_pDbEnvironment->set_lk_max_lockers(5000);
m_pDbEnvironment->set_lk_max_locks(5000);
m_pDbEnvironment->set_lk_max_objects(5000);
m_pDbEnvironment->open((zKSz)sPath, DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL |
DB_THREAD | DB_INIT_TXN | DB_RECOVER | DB_LOCKDOWN,
0);
We also checkpoint every 2 to 5 minutes with a 5MB threshold. We also explicitly call pDbEnvironment->log_archive(kpNil, DB_ARCH_REMOVE) after checkpointing.
Primary and (up to 4) secondary databases are opened with DB_CREATE | DB_AUTO_COMMIT flags.
I'd also appreciate any suggestions as to how to lower the memory footprint used by Berkeley. Ever since we've integrated this DB, our memory usage has been too large and inconsistent. There are 6 independent environments the product uses during runtime. Each of these environments have a primary database and (up to 4) secondary databases, which are all opened with DB_CREATE | DB_AUTO_COMMIT flags.
Just recently we have added a memp_trickle every 5 seconds at 40% (Anything lower and it has no affect in the environment, in other words, db_stat shows dirty pages forced from the cached instead of trickled.) We are trying to reproduce this issue at this point. -
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed dengThe other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog)
Maybe you are looking for
-
Can I split the hard drive with Time Machine.
Just bought a new 1TB drive. I want to back up my MacBook. Time Machine formats the drive. Can I use the remaining 800GB for other things or does it have to be dedicated to Time Machine?
-
Hi gang, I have been pottering through the iCal dictionnary and seem to find no way of retrieving the info from a specific calendar regarding the URL on which it is published. Am I going to have to throw some dreaded GUI scripting at it ? \sigh Thank
-
How do I change the text language in Pages 5?
I'm working hard on a project since July in Catalan, everything was going well while I was working with iWork'09 but when I updated to Pages 5.0 the spell checking had changed the language to Spanish and doesn't check it in Catalan. What can I do to
-
Accessing flashvars in AS3 - FlashPlayer
Hello, I have a html file where I have defined a SWFObject with some flashvars, now I want to access these variables in my AS3 code of this SWF. ---------------------------HTML File ------------------------ <head> <title>Test</title> <style
-
Management of global employees Issue - continuation
I checked completely, My configuration on Actions part is as same as SAP standard Delivered but result differs such as it is considering the person's existing record (which created during Hiring) and automatically gets in to Copy Actions rather than