THOUGH I DO NOT ACTIVATE THE FIRST LINE "BROWSING AND DOWNLOAD HISTORY", MY DOWNLOADS ARE NEVERTHELESS DELETED. I JUST POSTED THIS QUESTION AND GOT 2 REPLI

When I do a "CLEAR RECENT HISTORY" and THOUGH I DO NOT ACTIVATE THE FIRST LINE "BROWSING AND DOWNLOAD HISTORY", MY DOWNLOADS ARE NEVERTHELESS DELETED.
I just posted this question under the "OTHER" category and got 2 replies, neither of which solves this problem!
IS THERE A SOLUTION? Thanks

Are you the same poster as Raphaex who posted using Windows 8.1 in this thread and provided a full and detailed set of data accessible using the "More System Details" link: https://support.mozilla.org/questions/1011435 ??
If not, could you provide a link to the earlier discussion on your situation if there is one? I don't want to repeat what you haven't found helpful, and also, it's critical to know your correct configuration information and not waste everyone's time typing out advice that is totally irrelevant.
To provide the missing details on your configuration:
# Use ONE of these methods to open the Firefox Troubleshooting Information page:
#* Click the "3-bar" menu button [[Image:New Fx Menu]], click on help [[Image:Help-29]] and select ''Troubleshooting Information''.
#* Type '''about:support''' into the Firefox address bar and press the enter key.
# In the top left corner of the Troubleshooting Information page that comes up, you should see a button that says "Copy text to clipboard". Click it.
#Now, come back to this thread, right-click in the reply box and select '''Paste''' from the context menu (or else click inside the reply box and press Command+v) to paste all the information you copied into the forum post.
Usually, this does not contain personal information, but I suggest you skim down and make sure you do not see your email address in there (XX it out ).

Similar Messages

The first 7 or 8 letters of a sentence are jumbled as I type. This happens only after a period of inactivity. Short or long. I start to type and a word like 'anybody', looks like this: 'ybodyan' I have done all the normal fixes. No luck. Ideas? Thx

The first 7 or 8 letters of a sentence are jumbled as I type. This happens only after a period of inactivity. Short or long. I start to type and a word like 'anybody', looks like this: 'ybodyan' I have done all the normal fixes. No luck. Ideas? Thx

It's in every text-input app I use in my normal day.....most frustrating as you have to do a doublecheck especially in documents which do not have any special spellcheck system. I've done the cleanmymac, maintenance, cocktail, PRAM reset, Font Cache Smash fixes.....and still I'm dogged by this. Its almost as though the motherboard or some interface system is 'sleeping' longer than it should (if there are any input areas of the MBP which rest during short periods of inactivity) and then the initial keystrokes on the keyboard are somehow not registered and only 'kick in' once half of a new word's characters are already on the screen........grrrrr.

File Sender adapter not reading the first line

Hi,
I have a scenario configured from file to jdbc adapter.
However, I found a problem in my file sender adapter. My file adpater always not picking up the first line from my text even I have set the 'Document Offset' to 0.
Any Ideas? Thanks.
Regards,
Pua

Hi Latika Sethi,
My complete input text file is as below, it contains only 2 testing records:-
H1|DIZ1                          |A0016507    |10000020|09/2007
H2|ABC0001
D|P|0001|Gaji Pokok       |   1,000.09
D|D|0002|Denda              |   1,000.00
D|P|0003|Elaun               |   1,000.00
H1|PUA1                        |A0016508    |10000021|09/2007
H2|ABC0002
D|P|0001|Gaji Pokok       |   2,744.09
D|D|0002|Denda              |   2,000.00
D|P|0003|Elaun               |   2,000.00
After the message mapping, I found the pipeline existed in sxmb_moni as below:-
<?xml version="1.0" encoding="utf-8"?>
<ns:mt_rmp03B_filejdbc_sender xmlns:ns="urn:rmp03:pdrm:ips:jdbcjdbc">
<PaySlip>
..<Header2>
.... <IC>ABC0001</IC>
.. </Header2>
.. <Details>
.... <Jenis>P</Jenis>
.... <No>0001</No>
.... <Deskripsi>Gaji Pokok</Deskripsi>
.... <Jumlah>1,000.09</Jumlah>
.. </Details>
</PaySlip>
<PaySlip>
.. <Header1>
.... <Nama>PUA1</Nama>
.... <KWSP>A0016508</KWSP>
.... <NoGaji>10000021</NoGaji>
.... <Bulan>09/2007</Bulan>
.. </Header1>
.. <Header2>
.... <IC>ABC0002</IC>
.. </Header2>
.. <Details>
.... <Jenis>P</Jenis>
.... <No>0001</No>
.... <Deskripsi>Gaji Pokok</Deskripsi>
.... <Jumlah>2,744.09</Jumlah>
.. </Details>
</Payslip>
There are 2 payslips as for the top payslip node...Header1 tag is missing. It means that during the file sender step....the first line of my record which is :-
"H1|DIZ1                          |A0016507    |10000020|09/2007"
is not read into the xi pipeline. Basically this is the problem i faced.
Has somebody facing the same problem before? Currently I have no choice but moved the First line of the text into Second line and left the first line of the text become null/ empty line. As such both records can be successfully read by the XI.
However what I wondered is sometimes clients will do insert the records into the first line and this might made some data loss.
Thanks...

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

What are the Variables settings, what is the text file’s content, …?

When printing a highlighted (selected) print range from an internet item pulled up through Firefox, the first line of the selected range is not printing or is partially cut off.

When printing a highlighted (selected) print range from an internet item pulled up through Firefox, the first line of the selected range is not printing or is partially cut off. This is not an issue with my printer, as printer prints the whole selected print range when using Internet Explorer or Word Doc applications. The problem only happens when using Firefox. Please advise on how to fix this. Is this a settings issue or do I need to download and update? Thx

* [[Printing a web page]]
* [[Firefox prints incorrectly]]
Check and tell if its working.

In converting a pdf file to xlxs it did not convert the first 48 lines.

When I converted a pdf file that I originally created in Excel, it did not convert the first 48 rows of info.

Good day Hudda,
I've seen this behavior a few times over the last few months. You could try disabling the 'Recognize text' function, but it may not help. We're anticipating an update to the ExportPDF service within the next few weeks that should help with issues like this, but I don't have an immediate solution for you.
Please let me know if you have any questions.
-David

Trying to use this() in a constructor, not the first line

I'm currently re-writing some old code of mine that was used to create a neural network. My main contructor, originally, was
public Network(int sizeLayer1, int sizeLayer2, int sizeLayer3) Now, however, I've decided that I want to make my network a little more general, and allow any number of layers. Therefore, my revised basic constructor is
public Network(int[] sizeLayers)which expects an array of ints corresponding to the size of each layer.
However, I've got some old programs that use the old contructor which I can't change (and anyway, it's good to have the option to be able to use both). I therefore want to create a constructor that has the same signature as the old one, but simply places the values in an array and passes the array to the new constructor.
public Network(int sizeLayer1, int sizeLayer2, int sizeLayer3) {
int[] sizeLayers = {sizeLayer1, sizeLayer2, sizeLayer3};
this(sizeLayers);
}obviously won't work, because 'this' must be the first line of the constructor. How can I put my values in an array and call the new constructor?
Thanks!

Silly me -- I had been trying to do
this({sizeLayer1, sizeLayer2, sizeLayer3});but of course that wouldn't work.
Thank you very much for that reply!
However, more generally, what if I wanted to do a few lines of processing on the variables passed, like adding them together before calling this()? Is there no way to do that? What's the purpose of requiring that this() be the first line in the constructor?
Thanks!

Excel upload with header in the first line

Hi ,
I have to upload a Excel sheet with data where the first line will be the Header .
I am using the FM
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      I_LINE_HEADER        = 'X'
      I_TAB_RAW_DATA       = IT_TAB_RAW_DATA
      I_FILENAME           = P_FILE
    TABLES
      I_TAB_CONVERTED_DATA = IT_FS00_C
    EXCEPTIONS
      CONVERSION_FAILED    = 1
      OTHERS               = 2.
But the data is not getting uploaded in the IT_FS00_c table.
is there any other way to do it.
thanks and regards,
Vikki.

Use the folllowing coding.....
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
         EXPORTING
              filename                = p_file
              i_begin_col             = 1
              i_begin_row             = 2
              i_end_col               = 7
              i_end_row               = 9999
         TABLES
              intern                  = t_alsm_tab
         EXCEPTIONS
              inconsistent_parameters = 1
              upload_ole              = 2
              OTHERS                  = 3.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    SORT t_alsm_tab BY row col.
    LOOP AT t_alsm_tab INTO r_alsm_tab.
      AT END OF row.
        l_append = 'X'.
      ENDAT.
      IF r_alsm_tab-col = 1.
        r_input_tab-kokrs = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 2.
        r_input_tab-bukrs = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 3.
        r_input_tab-rprctr = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 4.
        r_input_tab-pline = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 5.
        r_input_tab-sdatst = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 6.
        r_input_tab-sdated = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 7.
        r_input_tab-kostl = r_alsm_tab-value.
      ENDIF.
      IF l_append = 'X'.
        APPEND r_input_tab TO t_input_tab.
        CLEAR : l_append , r_input_tab.
      ENDIF.
    ENDLOOP.
ENDIF.

Adding extension "line-size 255" to a standard report on the first line

Hi Experts,
i want to modify the statment from Report ztest1 message-id zm to Report ztest1 message-id zm and line-size 255.
I am going to add the extension line-size 255 to the report statement in a standard report. There are no enhancement points near the first line. I have access key available, so i can make the changes to core mod.
The problem is that if i run the report in background, out of the 8 fields, i only see the first 6 columns in the spool. remaining 2 fields are truncated.
The reason for truncation is bcoz the line-size extension is not given to the report. What procedure do i have to follow to add the extension line-size 255?

HI,
You do not need any enhancement for it.
If you have the access key then just add the additon line-size 255 to the repport statement.
Regards,
Ankur Parab

D110 only prints the first line.

If I send an item to the printer, it only prints the title. I have tried to copy to notepad and pasted to an email. Then sent it to the printer thru an email. It only prints the first line. How do I get it to print the whole item?

You can use one of our diagnostic tool and can this can help you resolve the issue automatically and you can use it in future as well.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=sg&dlc=en&sw_lang=&product=5169...
Check if the issue gets resolved.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Summary field printing on the first line when it supposed to prin last page

i have created manual report. in the end of the report i have summay columns. wheni run in oracle reports it perfectly shows the grand totle. when i generate to file (PDF) thegrand total print on the first line. can some one tell me wht is it printig on the first line when it supposed to print on the last page. i tried print object on Last Page. it is still same.

You may have hit this side effect of page protect (all copied from the Help):
Description The Page Protect property indicates whether to try to keep the entire object and its contents on the same logical page. Setting Page Protect to Yes means that if the contents of the object cannot fit on the current logical page, the object and all of its contents will be moved to the next logical page.
Note: Using Page Protect may cause objects below the page protected object(s) to appear above the page protected object(s).
Solution:
If Page Protect causes an object to be moved to the next logical page when formatting, an object alongside the page protected object may or may not be moved as well. If the object alongside the page protected object is not anchored (implicitly or explicitly) to the page protected object, and that object can fit in the space where the page protected object could not fit, the object will print on that logical page. Otherwise, the object will be moved along with the page protected object to the next logical page.
(To say it simply: anchor the summary field explicitly).

F.05 - why the entries are being reversed even though I did not tick the

Hi,
Please advice why the entries are being reversed even though I did not tick the reversal button in F.05.
Your assitance is very much appreciated.

Hi,
It is a standard SAP procedure by which the revaluation entries are automatically reversed. If you do not want to reverse the revaluation entries, you will have to Activate Delat Logic for the Valuation Area. SPRO Path is Financial Accounting (New)--> General Ledger Accounting (New) > Periodic Processing> Valuate --> Activate Delta Logic.
Once you activate this Delta Logic, at the time of fc valuation, you will get the check box for Annual or Mid Term revalation will come. If you select the annual option, the automatic reversal will not happen.
Regards,
Amit

I need to change the "from" address (the "add to addressbook" address) in the first line of emails that I send. How do I do this?

I need to change the "from" address (the "add to addressbook" address) in the first line of emails that I send so that people reply to my email alias not the address where my emails originate. How do I do this?

So you have added a new 'Identity' to your existing email address.
If someone sends an email using that 'other identity'
you have a choice of where those received emails can go. they can be received into the original mail account, like a collect all in the one Inbox or perhaps sent to Local Folders, so you can see them as separate. Or you can filter on that identity to put those emails in a specific folder.
When you REply to any incoming mail that has used that new identity email address, it will use the new identity in the Email address in FROM assuming the received email in the main mail account of which the new identity email is applied.
This should also now offer the added identity email address as an option in the FROM drop down list. So you can easily swap when sending an email if required.
If you want to send using your default email address to people, but want their reply to use the identity email address:
Tools > Account Settings
select the original email address mail account name
Where it says: 'Reply to addresses: enter the reply to identity email address.
click on OK
This means when they click on 'Reply' it will auto insert the Reply-to option.
This will work providing it is a 'Reply' to an email you sent which contains the Reply-to email address.
If someone is not actually replying by using the Reply-to new identity email address:
In other words they are sending you a new email using the original email address because perhaps that is the one in their address book or the one they located on a webpage etc.
Then, when you select to Reply to that email, it will use the email address to which it was sent to in the FROM field - the original email address. Hence why you would need to select the new identity FROM in the drop down list.
One way to get around this is set out below.
If you do not use an identity - instead you create another existing mail account for the 'identity' email address, so you have two mail accounts for the two email addresses.
You can move selected emails manually or perhaps using a filter to screen them from the original mail account into the newly created mail account.
Then when you click on Reply, it will use the new mail account email address instead of the original email address.

Help with how to count the number of tokens from the first line

Hi
I want to count the number of tokens from the first line of text, from my incoming file and print it out.
For example i have 12 tokens in the first line, so i want it to print out the number 12
my code is below
thanks
import java.io.*;
import java.util.*;
import java.lang.*;
import java.util.StringTokenizer.*;
import java.sql.*;
public class Data {
     public static void main(String[] args) {
                    String token = null;
                    String currentToken = "";
                    Hashtable hh = new Hashtable();
          try {
               Vector v2 = new Vector(100);
               Vector v = new Vector(100);
               FileReader file = new FileReader("words.txt");
               BufferedReader buff = new BufferedReader(file);
               String line = buff.readLine();
               StringTokenizer s = null;
               boolean eof = false;
               while (!eof){
                    s = new StringTokenizer(line.trim(),",",true);
                    boolean lastToken = true;
               while (s.hasMoreTokens()) {
                          token = s.nextToken();
                              if (lastToken){
                               if (token.equals(",")) {
                                    v.add("");
                                           lastToken = false;
                                  if (! token.equals(",")) {
                               v.add(token);
                              else { if (currentToken.equals(",")) {
                                    v.add("");
                              currentToken = token;
                    if (token.equals(",")) {
                           v.add("");
               line = buff.readLine();
                    if (line == null){
                         eof = true;}
               buff.close();
          }catch (FileNotFoundException fe) {
                    System.out.println("Error - - " + fe.toString());
          }catch (NumberFormatException ne) {
                    System.out.println("Error - - " + ne.toString());
          } catch (IOException e) {
               System.out.println("Error - - " + e.toString());
}     2.

I can print out the amount of tokens from each line,
But i only want the first line to be counted, And i
also do not want the delimeters to be counted.
could you please give me some ideas?
Thanks
try
   BufferedReader br = new BufferedReader(new FileReader("item.kr"));
   while((str=br.readLine())!= null)
      itemslist.add(str);
catch(IOException ioe)
   System.out.println("Exception Occurred!!!");
}This snippet gets one Line from the item.kr file.
Then i would count (By useing a diffrent String Tokenizer) to count only this line!!!

How to set cursor at the first line in a table control?

Hi,
I have a customized infotype screen where a table control is being used to input new values.The tab control has 30 lines.Now, the problem is that when the screen is displayed, the cursor always starts at 8th or 4th line.The behaviour is not very consistent.I tried the following statement in the PBO, but no effect.
SET CURSOR FIELD P9417-ZCOUNTRY LINE 1. ( P9417-ZCOUNTRY is the name of the tab control field where i want to set the cursor ).This is the last statement in the PBO.
Can someone please tell me why still I am not able to set the cursor at the first line? I have infact noticed that , in the debugging mode , sometimes the cursor starts at the first line.Please help. Thanks

I have got a new requirement on this now. If the table control does not have any records , then the cursor position should be on the first row.Otherwise, if it already has some records, then the cursor should be at the first empty row.I wrote the code like below.
if sy-ucomm = 'INSERT'.
set cursor 'P9714-ZCOUNTRY' line 1.
else if sy-ucomm eq 'CHANGE'.
describe table itab lines fill.
fill = fill + 1.
set cursor 'P9714-ZCOUNTRY' line fill.
endif.
I am facing a strange problem now.The table control has some 10 rows when you see the screen for the first time.If the number of records already present is less than 10, I am able to position the cursor on the first empty row.But if the number is say 15, then the cursor position goes to eighth or fourth line or sometimes the first line.
Is there any way to display the last few records , ie, if there are 15 records , is there any way to display the last five rows when I see the screen for the first time, rather than showing the first 10 records?How can I position the cursor at the first empty row, when there are more records?
Thanks in advance..good answers will be rewarded.
Mahesh

THOUGH I DO NOT ACTIVATE THE FIRST LINE "BROWSING AND DOWNLOAD HISTORY", MY DOWNLOADS ARE NEVERTHELESS DELETED. I JUST POSTED THIS QUESTION AND GOT 2 REPLI

Similar Messages

Maybe you are looking for