Thumbnailvorschau für .nef (Nikon) im Editor bei Elements 11 nicht möglich.

Warum zeigt mit Elements 11 die nicht an.ß
Gruß

Kaiwonline,
As Claudio pointed out, this forum is for discussing the Adobe Forums, themselves.
I will Move your post to the very helpful and active Photoshop Elements Forum. Your link, and any e-mails subscriptions will follow along.
Good luck,
Hunt
[Moved to Photoshop Elements Forum]

Similar Messages

Hallo, ich möchte ein abgelaufenes Abo der CS 5.5 wieder aktivieren. Leider ist dies bei den Einstellungen nicht möglich. Die Kunden-Nr. ist 243369310

Hallo, ich möchte eine abgelaufenes Abo der CS 5.5 wieder aktivieren. Leider funktioniert dies nicht. Kann mir hier jemand helfen. Kunden-Nr. ist 243369310

Adobe contact information - http://helpx.adobe.com/contact.html may help

When I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

when I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

I have a Nikon D750 but Photofshop Elements 13 cannot open its NEF files. What can I do?

I have a Nikon D750 but Photofshop Elements 13 cannot open its NEF files. What can I do?

Try Help / Updates in the Editor. The D750 was first supported in the ACR 8.7 and PSE13 ships with ACR 8.6.

I use photoshop elements version 11 and just bought a nikon d750. Photoshop elements can't open/read the raw/NEF-file. Does a photoshop elements raw converter exist for Nikon d750 ??? And where can I get it ?

I use photoshop elements version 11. I just bought a nikon d750. Photoshop elements can't read/open the raw/NEF-file.
Does a raw converter exist for this camera and where can I find it ?
Thanks for any help.
erwing97792269

You need Adobe camera raw version 8.7. Unfortunately your software pre-dates the camera. ACR 8.7 is only compatible with PSE13. But it is possible to download and install the free DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.7
Mac download (.dmg file) click here DNG Converter 8.7
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

New install of CS3 won't open NEF (Nikon RAW) images

New install of CS3 on my new PC laptop won't open NEF (Nikon RAW) images. Same PC product opens them on my older desktop, and CS5 for MAC opens them on my iMAC.
What am I missing? CS3 has been registered and activated. Thank you

Hi, Again, John,
I followed the instructions to the letter, and nothing worked. I still got the wrong kind of file message. After I tried to use the plug-in, I could no longre open pages in IE or Firefox. I have to wipe my new computer and reinstall everything. This time, I made CS3 the first thing I installed, and followed the instruction again as follows:
"Windows
®
1. Exit Photoshop CS3 and Adobe Bridge.
2. Open My Computer.
3. Double-click Local Disk (C:).
4. Navigate to Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats.
5. Move the existing Camera Raw.8bi plug-in to anot
her location (for example, a new folder on your
desktop). Ensure you keep this version in case you need to revert back.
6. Copy the Camera Raw plug-in, Camera Raw.8bi, fr
om the download into the same folder as Step 4.
7. Launch Photoshop CS3 or Adobe Bridge."
Still unable to open RAW images in PS. I did notice that the two files I copied to the desktop folder were the same, although one was slightly larger than the other. I chose to keep both.
Why is CS3 working on my desktop from the same disk with no plu-in, but not on my new laptop? Is it Windows 8.1 instead of XP? That doesn't make much sense. PLEASE help. This is insane.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

I purchased PS CS6 recently as a student. At TAFE today we were instructed to convert our NEF (nikon) files to dng files using the converter in Bridge. However when I got home I don't seem to have the converter as far as I can see. Can you help me plea

I recently purchased PS CS6 as a student. At TAFE today we were shown how to convert NEF (nikon) files to dng in Bridge. C
an anyone help me find the converter please?

Adobe Camera Raw (ACR) would be the converter to do this from Bridge. In Bridge, select your nef files then Open in Camera Raw. In ACR, 'select all' then Save Images button at bottom of ACR and set save format to Digital Negative. (File extension should show dng.)

Help Cannot Read any of my NEF (Nikon RAW) with iPhoto '08

I recently upgraded to iPhoto '08 and also to an Intel-based iMac (24in 2.8Ghz).
But now I cannot import, view or manipulate any of my old NEF (Nikon RAW format) pictures. Strangely, I also cannot view them in my Aperture. Previously, using PowerPC Mac, I had no problems viewing both.
Is this a compatibility issue with the Intel-based Macs? Is it an issue with the latest version of iPhoto?
Is this something I can solve, or will I need to convert all my NEF files to JPEG using Nikon software? Which I'd really rather not do since I have a vast number of them.
Thank you so much.

Joseph
RAW support is a function of the OS rather than iPhoto or Aperture. I would download and re-apply the 10.4.10 update from http://www.apple.com/support/downloads.
Dont forget to repair permissions after.
Regards
TD

Problem mit Diashow Editor in Elements 8

Hallo,
mit Elements 8 kann ich zwar eine Diashow erstellen, beim Abspielen bleibt das Fenster im Editor und bei Vollbild jedoch schwarz. Ich sehe unten, dass die Show läuft und höre auch die Musik. Mit Elements 7 hatte ich kein Problem.
Ergänzung:
1. Wenn ich auf einzelne Bilder klicke erscheinen diese im Fenster.
2. Ich habe mit Diashows, die ich mit Elemenst 7 erstellt habe und die damals korrekt funktioniert haben, nun im Diashow Editor von Elements 8 das gleiche Problem. Hat sonst wirklich niemand das gleiche Problem?
Nachricht geändert durch [email protected]
Nachricht geändert durch [email protected]

Ich habe Elements 7 wieder installiert und konnte nun die Diashow erstellen. Das Problem liegt somit beim Diashow-Editor von Elements 8.
I reinstalled Elements 7 and was able to create the Diashow. So problem must be with the Diashow Editor of Elemets 8.

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

Yes, I see:
Letzte Aktualisierung
16.04.2012
The link I gave is listed in the faqs of this forum.
Photoshop Elements FAQ List
mfG
Michel

I own both Photoshop Elements and Photoshop (the original editor). I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop. When I try to install Photoshop as a secondary editor in elements I get an error messa

I own both Photoshop Elements and Photoshop (the original editor). I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop. When I try to install Photoshop as a secondary editor in elements I get an error message that I don't need to this because it is already supported on the edit menu and task bar. I can not find any way to send images to Photoshop for editing - all I can do is send them to elements editor or the premier editor. Can someone tell me how to send them to Photoshop? Thanks!

Hi,
The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian

Unable to open raw files from nikon 7100 in Adobe Elements 10 ?

I can't open raw files from my new Nikon 7100 in Photoshop Elements 10. I was able to do in with raw files from my Nikon D7000.

http://forums.adobe.com/message/5422388#5422388

How can I open RAW files from Nikon D7100 in Photoshop Elements 9?

How can I open RAW files from my Nikon D7100 in Photoshop Elements 9

Three choices:
1. Upgrade to PSE11
2. download the free Adobe DNG Converter and then convert your RAWs to DNG, which will open in PSE9
3. Use manufacturer's software and convert to TIF (or JPG)

Editor in elements 8 will not open. using windows 7 home premium. can this be fixed

editor in elements 8 will not open. computer has windows 7 home premium. steve

You may need to rebuild the editor preferences to resolve any conflicts.
Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it. Or hold down the keys whilst double clicking on PhotoshopElementsEditor.exe
You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
Click on Yes
Then wait whilst Elements rebuilds the preferences.

Thumbnailvorschau für .nef (Nikon) im Editor bei Elements 11 nicht möglich.

Similar Messages

Maybe you are looking for